Archive | September 2024

Fa La La La!

Sep27

Today I’m sharing a Christmas card that I made using KLM Digital Designs – Window Kitty from the new September 2024 Release.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Tim Holtz Distress Ink – Evergreen Bough was applied around the outside edges with a finger dauber and a blender brush was used to apply ink around the inner edges of the card base.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. With a Cuttlebug, Sizzix Rounded Tags were used to die cut the image and Recollections – Black cardstock. The image was coloured in with Copic markers and a Prismacolor Premier black pencil was used to add in some finer fur lines, the whiskers and to blacken around the mouth, nose and eyes.

The card was now ready to assemble. U-Line Double-Sided Foam Tape was applied to the image and large rounded tag. Both were applied together and popped up onto the card. A sentiment from Creative Expressions – Wordies Sentiment Sheets – Traditional Christmas was cut out and adhered to the card using Scrapbook Adhesives – 3D Foam Strips. Lastly, the snow flakes were added with a Gelly Roll Sakura #10 Pen.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Window Kitty

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black cardstock

Die Cuts: Sizzix Rounded Tags – 8 dies

Miscellaneous: U-Line Double-Sided Foam Tape, Creative Expressions – Wordies Sentiment Sheets – Traditional Christmas (CEW008), Gelly Roll Sakura #10 Pen, Scrapbook Adhesives – 3D Foam Strips

Image coloured with Copic Markers:

Cat: BV29, BV25, C4, W9, R89, R59, R56, R46, R29, R27, R24, R02, R01, R00

Brick Wall and Mortar: E19, E17, E13, C5, C3, C1

Drapes: BG72, BG57, BG32, BG11

Floor and Wall: E29, E27, E25, E23, Y17, Y15, C3, C1, R27

Window, Window Sill and Window Frame: BG000, C9, C7

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Owl – Holidays!

Sep24

Today I’m sharing a Christmas card that I made using KLM Digital Designs – Owl – Santa Hat from the new September 2024 Release. This image also comes with 2 other sentiments, “Merry Christmas” and “Owl I want for Christmas is you” besides the sentiment that I have used one this card.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Light Blue cardstock and Recollections – Christmas Snow Globe Vellum were cut to the same size as the base. The blue cardstock was attached with double-sided tape and the vellum was attached over top of this with liquid glue. The glue was only applied to the bottom of the vellum and then behind some snowflakes where the glue would not show. Lawn Fawn – Sparkle Cardstock in “Pixie Dust” was cut to the size of 4.25″ x 1.5″ and then cut with scissors to create the wavy ground. This was popped up onto the vellum using U-Line Double-Sided Foam Tape. Trees were then added under the hill that were created at an earlier time using my Cricut Explore and .svg files from Miss Kate Cuttables – Snowy Tree using liquid glue.

The image and sentiment were printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers, then fussy cut. Sakura Glaze – Black pen was used to apply the dot in the eye and a black marker was used to go around the entire out-line of the owl. Cosmic Shimmer Fluffy Stuff was then applied to the hat fringe and pompom. A Marvy Uchida – Embossing Heat Tool was used to heat the liquid to create the fluff effect. Using my finger, I dabbed Stickles – Diamond over the top of the fluff on the hat and pompom.  Stickles – Diamond was also applied to the tops of the snow pieces on the trees.

Once the Stickles dried, 2 layers of U-Line Double-Sided Foam Tape and some liquid glue were applied to the back of the image and 1 layer was applied to the sentiment. Both items were popped up onto the card. Lastly, Recollections – Snowflake Specialty Polyester Glitter was placed onto the card to hide where the glue seeped through the Vellum.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Owl – Santa Hat

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Light Blue Cardstock, Recollections – Christmas Snow Globe Vellum (12″x12″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Die Cuts: Miss Kate Cuttables – Snowy Tree (10342) (.svg)

Miscellaneous: Sakura Glaze – Black pen, U-Line Double-Sided Foam Tape, Cosmic Shimmer Fluffy Stuff, Recollections – Snowflake Specialty Polyester Glitter, Stickles – Diamond

Image coloured with Copic Markers:

Owl: Y38, Y35, Y17, Y13, E79, E53, E51, E50, E25, E23, E21, B39, B37, W9, W7,

Hat: BG09, BG05, BG02, BG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Floral Horseshoe – Pansies

Sep23

Today I’m sharing a CAS card that I made using KLM Digital Designs – Floral Horseshoe – Pansy from the new September 2024 Release.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Cuttlebug Embossing Folder – Swiss dots and a Cuttlebug were used to create the background on Hammermill – Premium Colour 100 lb. cardstock, cut to the size of 4″ x 5.25″. This was popped up onto the base card using U-Line Double-Sided Foam Tape.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers, then fussy cut. A Sakura Glaze – Black pen was used to apply the dot in the eye. Recollections – Purple Passions paper was cut to the size of 4″ x .75″. U-Line Double-Sided Foam Tape was applied to this and it was centred and popped up onto the Swiss Dots background. Crafter’s Companion Luxury Cardstock – Silver  was die cut 3 times using a Cutttlebug and “Good Luck” die from PaperCrafter Today – 15 Die Cut Sentiment Set. I glued the die cuts together with liquid glue to give them an embossed look and then glued them to the sentiment strip. Lastly, Kraftin’ Kimmie – Dazzling Dots were applied around the sentiment to finish off the card.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Floral Horseshoe – Pansy

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Purple Passions 8.5″ x 11″, Crafter’s Companion Luxury Cardstock – Silver – 8.5 x 11″

Embossing Folder: Cuttlebug Embossing Folder – Swiss dots

Die Cuts: PaperCrafter Today – 15 Die Cut Sentiment Set

Miscellaneous: Sakura Glaze – Black pen, U-Line Double-Sided Foam Tape, Kraftin’ Kimmie – Dazzling Dots

Image coloured with Copic Markers:

Horseshoe: C5, C3, C2, C1

Flowers: E15, Y17, Y15, Y11, Y08, V17, V12, V09, V000, RV14, RV13, RV11, RV000

Bird: E99, E97, YR20, YR16, YR15, YR12, Y32, B39, B14, B12, B06, B05, B000, BG01, C7

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Kick Your Feet Up!

Sep20

Today I’m sharing a birthday card that I made for my husband’s birthday back in August. Image and sentiment is from Art Impressions – Sit Back Laugh Lines – 5421.

My Creative Time – Rectangle Frame Die was used to die cut the rectangle out of Copic Marker X-Press It Blending Card using a Cuttlebug. The image was then stamped onto the paper using a MISTI and Memento – Tuxedo Black ink. It was coloured in with the Copic markers listed below and then adhered to some blue cardstock using liquid glue. I cut around the image rectangle leaving a thin border and then repeated the process with black cardstock. The sentiment was stamped with Versa Fine – Onyx Black ink  onto blue cardstock and then Ranger – Clear Super Fine Detail embossing powder was applied. A Marvy Uchida – Embossing Heat Tool was used to heat emboss the powder. This was fussy cut and adhered to black cardstock using liquid glue.

The base of the card was created using a 5.5″ x 4.25″ base made from Hammermill – Premium Cardstock 110 lb.cardstock. I applied birthday patterned paper to the base which was cut to the same size and the edges were inked with Tim Holtz Distress Ink – Faded Jeans. I centred the layered coloured image rectangle onto the card using liquid glue and then popped up the sentiment using U-Line Double-Sided Foam Tape in the top left corner to complete the card. Inside the card were more fun sentiments regarding getting older. LOL!

My husband loved it and I hope you do to!

Card Recipe:

Stamp and Sentiments:  Art Impressions – Sit Back Laugh Lines – 5421

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Faded Jeans

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black, Miscellaneous blue and patterned paper from stash

Dies: My Creative Time – Rectangle Frame Dies

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Miscellaneous: Marvy Uchida – Embossing Heat Tool, MISTI – Most Incredible Stamping Tool, U-Line Double-Sided Foam Tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R22, R20

Hair: E35, E34, E31

Jeans: B99, B97, B95, B91

Shirt: B04, B02, B01, B00

Chair and Slippers: E79, E74, E29, E27, E25, E23, C5, C3

Remote: N7, N4, N2

Socks: C5, C3, C2, C1, Colorless Blender

Wall: R89, R59, R39, C3, C2, C1, Colorless Blender

Floor: E39, E37, E35, E33

Hope you like it and have a great week!

Monster-ous Birthday Wishes!

Sep17

Today I’m sharing a birthday card that I made using the image and colouring class from Kit and Clowder – Bonus Class – July – August 2024 – Cute Monster. Had so much fun with this class learning how to blend colours and make spiky fur!

The image was printed onto Copic Marker X-Press It Blending Card using a HP printer set to High Quality Grayscale at the size of 3.75″ x 3.24″. It was coloured in using the instructional video from Alyce from Kit and Clowder and then fussy cut.  The cut image was applied to Recollections – Black cardstock and fussy cut again. The sentiment from Your Next Stamp – Silly Monsters was applied using Ranger Embossing Powder White – Extra Fine Detail and VersaMark ink onto Recollections – Black cardstock. A MISTI was used to get a clear stamped image. The embossing powder was heat embossed with a Marvy Uchida – Embossing Heat Tool. The sentiment was then fussy cut.

A card base at the size of 5.5″ x 4.25″ using Hammermill – Premium Cardstock 110 lb. cardstock was created. Tim Holtz Distress Inks – Peacock Feathers was applied all around the inside edges of the card with a blender brush. The patterned monster paper from Forever In Time – Party Monsters Perfect Prints was cut to the size of 5-3/8″ x 4-1/8″ and Tim Holtz Distress Inks – Shaded Lilac was applied all around the edges using a blender brush and finger dauber. This was adhered directly to the base using liquid glue. U-Line Double-Sided Foam Tape was applied to the monster and the sentiment and both were popped up onto the centre of the card. Lastly, Kraftin’ Kimmie – Underwater Dots and Stickles – Diamond were applied to the finished card to add some bling.

Card Recipe:

Stamp: Kit and Clowder – Bonus Class – July – August 2024 – Cute Monster class image

Sentiment: Your Next Stamp – Silly Monsters (CYNS047) – Retired

Inks: HP High Quality Grayscale, VersaMark, Tim Holtz Distress Inks – Peacock Feathers, Tim Holtz Distress Inks – Shaded Lilac

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black, Forever In Time – Party Monsters Perfect Prints

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: Marvy Uchida – Embossing Heat Tool, MISTI – Most Incredible Stamping Tool, U-Line Double-Sided Foam Tape, Kraftin’ Kimmie – Underwater Dots, Stickles – Diamond

Hope you like it and have a great week!