Tag Archive | Cosmic Shimmer Fluffy Stuff

Birthday Wishes!!

Dec29

Today, I’m sharing a birthday card that I made using Polkadoodles stamp called Winnie – Birthday Tree for my sister-in-law.

To create this card I began by making a base of 5″ x 5″ using Hammermill – Premium Colour 100 lb. cardstock. I applied a combination of Tim Holtz Distress Oxide Ink – Worn Lipstick and Festive Berries around the edges of the card with blending brushes. I imported the image into Microsoft Word and then printed it out using High Quality Grayscale onto Copic Marker X-Press It Blending Card cardstock.

With my Cuttlebug, I die-cut the image and Hot Buy Craft Smart – Holiday Glitz Glitter Paper using Whimsy – Wavy Stitched Squares Die Set. U-Line double-sided tape was attached to the larger die-cut and it was popped up onto the centre of the card. I coloured in the image using Copic markers and then added Cosmic Shimmer Fluffy Stuff to the snow on the bottom. A Marvy Uchida – Embossing Heat Tool was used to puff up the liquid. Stickles – Diamond was added to the snow in between and in some areas on top of the Fluffy stuff. With a UNIPosca PC-3M White marker, I created the snow in the sky. Once the Stickles dried, I popped up the coloured image layer to the card using U-Line double-sided tape as well. YNS Gumdrops – Sparkly Enchanted Garden were added to the centre of the snowflakes to finish off the card.

Card Recipe:

Stamp: Winnie – Birthday Tree – Polkadoodles

Inks: High Quality Grayscale, Tim Holtz Distress Oxide Ink – Worn Lipstick, Tim Holtz Distress Oxide Ink – Festive Berries

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: Whimsy – Wavy Stitched Squares Die Set (WSD371)

Tools and Miscellaneous: U-Line double-sided tape, Cuttlebug, UNIPosca PC-3M White marker, Cosmic Shimmer Fluffy Stuff, Stickles – Diamond, Marvy Uchida – Embossing Heat Tool, Stickles – Diamond

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E47, E44, E43

Coat, Mitts, Hat and Boots: BG72, BG57, BG32, BG11, W9, W7, W5

Cupcake: BG57, BG32, B23, RV17, RV14, RV13

Racoon: W9, W7, W5, W2, W0

Present and Bow: RV14, RV13, RV11, Y28, Y26, Y23, Y15

Tree: G99, G21, G20, YG67, YG17, E49, E27, E25, E23

Sky: B05, B04, B02, B01

Dress, Hat and Coat Trim: C1, C0, C00

Shadows in Snow: BV23, BV20, Colorless Blender

Hope you like it and have a great week!

Everything is Magical!

Dec15

Sharing a Christmas card that I made today using KLM Digital Design – Sledding Gnome from the new December 2022 release. This image also comes with 2 more sentiments, “Some people are worth melting for” and “Walking in a Winter WONDERLAND”.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I cut Lawn Fawn – Let It Shine Snowflakes designer paper to be the same size and adhered it to the base using double-sided tape. The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The printed image was die cut using my Cuttlebug and Die-namics – MFT – Stitched Rec Scallop Frame dies. It was coloured in and then I applied Cosmic Shimmer Fluffy Stuff. DecoArt Glamour Dust was sprinkled over top while it was still wet and then it was heat set with a Marvy Uchida – Embossing Heat Tool to puff up the snow. I applied the snow flakes in the sky using a UNIPosca PC-3M White marker and snow on the ground with Stickles – Diamond in between and on top of the fluffy snow. U-Line double-sided tape was applied to the image after the Stickles was dry and it was popped up onto the base.

Card Recipe:

Stamp and Sentiment:  Sledding Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Lawn Fawn – Let It Shine Snowflakes (6″ x 6″)

Dies: Die-namics – Exclusive Designs for “My Favourite Things” – Stitched Rec Scallop Frame – MFT-860

Miscellaneous: U-Line double-sided tape, Stickles – Diamond, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust, Marvy Uchida – Embossing Heat Tool, UNIPosca PC-3M White marker

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beard: E47, E44, E43, E41

Hat and Mittens: BG72, BG57, BG32, BG11

Jeans: B26, B23, B21

Shoes: C9, C7, C5

Shirt: R46, R14, R08

Sled: E39, E37, E35, E34, E31, E30,  C5, C3, C1

Holly: BG99, YG17, YG03, R46

Sky: B02, B01, B00, B000

Snow: BV20, B000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Winter Wonderland

Dec8

Sharing a CAS card that I made today using KLM Digital Design – Skier Gnome for the main image and Sledding Gnome for the sentiment from the new December 2022 release. I tried Cross-Country skiing a few times. I was so bad at it, that once was enough for any of my friends. They said I was too dangerous on them. LOL! I even skied down into a tree to avoid knocking over 3 people once going down a small hill. My friend was laughing so hard it took him a little while before he could help me back up away from the tree. But, by the time we got back he was freezing and I was hot from all of the hard work I was doing trying to keep up to him. He was a professional skier. That was the last time he ever went with me. Then there was the time that there were about 6 of us. They made the mistake of asking me to go first side-stepping up the hill. I almost made it to the top when my foot slipped and yes, I knocked everyone over like a bunch of bowling pins. LOL! Guess what??? They never went with me again either. Oh well! Some things are just not meant to be!!! As you may have guessed by now. Downhill is definitely out of the question for me.

To make my card this week, I started with a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. Recollections – Christmas Plaids paper was cut to the same size and adhered directly to the base using double-sided tape! The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. With my Cuttlebug and My Creative Time – Rectangle Frame Dies, I die cut the printed image and sentiment.

I coloured in the image and then added in the snow in the sky using a combination of a Gelly Roll Sakura #10 Pen and UNIPosca PC-3M White marker. The snow at the bottom was created using a combination of Cosmic Shimmer Fluffy Stuff and DecoArt Glamour Dust. To puff up the snow, heat was applied using Marvy Uchida – Embossing Heat Tool. I added a little more glitter along the very top of the snow with Stickles – Star Dust. The completed image was then popped up onto the card using U-Line double-sided tape.

Card Recipe:

Stamp:  Skier Gnome – KLM Digital Designs

Sentiment: Sledding Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Christmas Plaids

Die Cuts: My Creative Time – Rectangle Frame Dies

Miscellaneous: U-Line double-sided tape, Cuttlebug, Gelly Roll Sakura #10 Pen, UNIPosca PC-3M White marker, DecoArt Glamour Dust, Cosmic Shimmer Fluffy Stuff, Stickles – Star Dust, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E08, YR18, YR16, YR12

Antlers: E33, E31, E30

Ears: R25, R23, R02, R01

Shirt and Hat: G46, G29, G24, G21, R39, R34

Jeans: B26, B23, B21

Boots: E34, E33, E31, E29, E27, E25, E23

Poles: E39, E37, E35, C8, C6, C5, C4, C3, C1

Sky: B99, B97, B95, B93

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Snowmen – Winter Fun!!

Dec6

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Snowman Dash – TT054 for the main image and Winter Fun! – F109, for the sentiment. Growing up in the North, we couldn’t wait to get home from school to go sledding down the hills across the street or behind our house. There was so much snow that the snowbanks the plows created were just the perfect height for us to have loads of fun! On the weekends, we would go to the much larger hills!

To make my card this week, I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. I inked around the edges with a blender brush and blue ink that I still had on it from a previous project. I don’t clean off my brushes because I have dedicated brushes for each colour group.

The image was stamped onto the inner die cut using my MISTI and Memento – Tuxedo Black ink, which I had die cut using my Cuttlebug and paper from Copic Marker X-Press It Blending Card cardstock with MFT – Stitched Rec Scallop Frame dies. I coloured in the image and then added the sentiment using a MISTI, VersaMark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat embossed using a Marvy Uchida – Embossing Heat Tool. The snow in the sky was created using a Gelly Roll Sakura #10 Pen and UNIPosca PC-3M White marker. Stickles – Star Dust was added to the snow on the hill and Cosmic Shimmer Fluffy Stuff and DecoArt Glamour Dust were added to give some texture to the snow where the sled had been. A Marvy Uchida – Embossing Heat Tool was used to fluff up the Cosmic Shimmer Fluffy Stuff. Once the Stickles was all dry, I pieced the 2 die cuts back together using Scotch tape on the back. U-Line double-sided tape was added to the combined piece and it was popped up onto the card.

Card Recipe:

Stamps: Snowman Dash – TT054 (High Hopes Rubber Stamps)

Sentiment: Winter Fun – F109 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Die Cuts: Die-namics – Exclusive Designs for “My Favourite Things” – Stitched Rec Scallop Frame – MFT-860

Tools and Embellishments: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Stickles – Star Dust, Cuttlebug, DecoArt Glamour Dust, Cosmic Shimmer Fluffy Stuff, UNIPosca PC-3M White marker, Marvy Uchida – Embossing Heat Tool, Blending Brush

Image coloured with Copic Markers:

Snowmen: BV20, B0000, YR68, YR31, Y38, R59, R235, 100, W9, W7, W5, Colorless Blender

Snowman1 Mittens and Scarf: BV08, BV13, BV02, BV01, BV00

Snowman2 Mittens and Scarf: BG75, BG57, BG49, BG13, BG11, BG10

Snowman3 Hat and Mittens: R59, R46, R37, R35, R14, R08

Sled: E49, E47, E39, E37, E35, E34

Sky: B06, B05, B04, B02

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Holiday Wishes!!

Nov23

Today, I’m sharing a Christmas card that I made using Dreamerland Crafts stamps called Holiday Wishes – D18031.  May all of your holiday wishes come true this season for you and your loved ones!

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Recollections – Stardust Christmas paper was cut to be the same size as the base and then adhered to the card using double-sided tape. Lawn Fawn – Sparkle Cardstock in “Pixie Dust” paper was cut to 5.5″ x 1.25″ x 5.5″ x .75″. With my hands I tore along the top of both pieces to give the snow some texture. I applied double-sided tape to the larger piece and adhered it directly to the card. U-Line double-sided tape was applied to the smaller piece and it was popped up over top of the larger piece.

The base card was placed into my MISTI and the sentiment from Kraftin’ Kimmie Stamps – The Magic of Christmas was stamped onto it using VersaMark ink. Recollections Detail Embossing Powder – Silver was applied over top of the ink and then heat embossed using a Marvy Uchida – Embossing Heat Tool. I removed this from the MISTI and stamped the main image with Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card cardstock. The image was coloured in and then fussy cut. With a black marker, I inked around all of the edges and then added U-Line Double-sided tape to the back of the image and popped it up onto the card and snow. Cosmic Shimmer Fluffy Stuff was placed under the couple’s boots and then heat embossed using a Marvy Uchida – Embossing Heat Tool to puff it up. Stickles – Diamond was then added over top of the fluffy snow to create more sparkle. Finally, to complete the card, Stickles – Crystal was applied to the centre of the stars in the sky.

Card Recipe:

Stamps: Holiday Wishes – D18031 – Dreamerland Crafts

Sentiment: Kraftin’ Kimmie Stamps – The Magic of Christmas

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Recollections – Stardust Christmas (12″ x 12″)

Embossing Powder: Recollections Detail Embossing Powder – Silver

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, Cuttlebug, Cosmic Shimmer Fluffy Stuff, Stickles – Diamond, Stickles – Crystal

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R22, R20

Hair: E47, E44, E43, E15, Y38, Y15, YR21

Jeans: B26, B23, B21

Girl’s Hat and Scarf and Boy’s Sweater: G99, YG67, YG17

Girl’s Coat and Boy’s Hat and Scarf: R59, R37, R35

Boy’s Jacket and Boots: E29, E27, E25, E23, E21

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Carolers – Joy To The World!!

Nov8

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Carolers – TT011 for the main image and Joy to the World – GLL012, for the sentiment. Seeing these carolers reminds me of my younger days when we would go visiting and sing Christmas carols at our cousins and our parent’s friends’ houses.

To make my card this week, I began with a card base from Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards). Using my Cuttlebug and paper from Crafter’s Companion – Luxury Cardstock – Ice Blue Pack, I die cut the snowflake border with Lawn Fawn – Snowflake Border die cuts. Using the same paper, I cut a thin strip .25″ x 5.5″. With Lawn Fawn – Sparkle Cardstock in “Pixie Dust”, I cut a strip 1″ x 5.5″. Using double-sided tape, I attached the 1″ strip directly onto the base card. I ran the other strip through my Xyron Create a Sticker and attached it to the card next to the 1″ strip. I added liquid glue to the backs of each of the snowflakes for the snowflake border and adhered them over top of the larger strip. Tim Holtz Distress Inks – Tumbled Glass and a finger dauber were used to ink around all of the edges of the card.

With my Cuttlebug and dies from My Favourite Things – Die-namics – Elegant Rectangle Stax, I die cut a large rectangle out of Copic Marker X-Press It Blending Card cardstock. The image was stamped onto the die cut using my MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. I coloured in the image and then added the snow in the sky using a Gelly Roll Sakura #10 Pen. Cosmic Shimmer Fluffy Stuff was added to the trim of the girl’s jacket and then heat set with a Marvy Uchida – Embossing Heat Tool to puff it up. Crystal – Stickles was added on top of this and also along her dress hem. DecoArt Snow-Tex sprinkled with DecoArt Glamour Dust and a spatula were used to create the snow on the bottom of the image. Crystal – Stickles was added to add some extra sparkle and give some highlights. Wink of Stella – Clear was added on top of the music books. The sentiment was stamped onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Northern Pine ink. It was then die cut using my Cuttlebug and Poppystamps – Christmas Quotes dies. Tim Holtz Distress Ink – Rustic Wilderness was used to ink around the edges. I added U-Line double-sided tape to the back of the sentiment and finished image and popped them both up onto the card. Lastly, I added Ranger – Snowflake Glitter with liquid glue to finish it off.

Card Recipe:

Stamps: Carolers – TT011 (High Hopes Rubber Stamps)

Sentiment: Joy to the World – GLL012 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness, Memento – Northern Pine, Tim Holtz Distress Inks – Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards), Crafter’s Companion – Luxury Cardstock – Ice Blue Pack, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Die Cuts: My Favourite Things – Die-namics – Elegant Rectangle Stax – MFT-1268, Lawn Fawn – Snowflake Border (#LF2431), Poppystamps – Christmas Quotes

Snow: DecoArt Snow-Tex, DecoArt Glamour Dust, Crystal – Stickles

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cosmic Shimmer Fluffy Stuff, Crystal – Stickles, DecoArt Glamour Dust, Cuttlebug, Marvy Uchida – Embossing Heat Tool, Xyron Create a Sticker, Ranger – Snowflake Glitter

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R24, R21 (Eyes: Gelly Roll Sakura #10 Pen, Sakura Glaze – Black)

Hair: E15, Y38, Y21, YR23, E47, E44, E43, E42

Boy Mitts, Scarf and EarMuffs: BG09, BG05, BG02, BG01

Boy Jacket: R59, R37, R35

Boy Jeans: B26, B23, B21

Boy Boots: E27, E25, E23, E21,

Girl’s Coat and Boots: BG72, BG57, BG32, BG11, Cosmic Shimmer Fluffy Stuff, Crystal – Stickles

Girl Dress and Leggings: YG67, YG63, YG61, G19, G16, G14, Crystal – Stickles, Gelly Roll Sakura #10 Pen

Girl EarMuffs and Mittens: YG67, YG63, YG61

Song Books: YR23, Y15, Y11, Y00, Wink of Stella – Clear

Bird: R46, R14, R08

Cat: T9, T7, T5, T4, R01

Dog: E37, E35, E33, R24

Sky: B99, B97, B95, B93

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

North Pole Greetings!!

Nov2

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps North Pole Penguin – TDG008 for the main image and Seasons Greetings – F300A, for the sentiment. Christmas is getting nearer and this little penguin is helping Santa deliver some of your presents this year!

To make my card this week, I began with a card base from Crate Paper – Boxed Cards – Mittens & Mistletoe (5.5″ x 4.25″). Tim Holtz Distress Ink – Rustic Wilderness and a finger dauber were used to ink around all of the edges. With my Cuttlebug and dies from My Favourite Things – Die-namics – Elegant Rectangle Stax, I die cut a large rectangle out of Forever In Time – Texture Rouge paper and a smaller one out of Copic Marker X-Press It Blending Card cardstock. U-Line double-sided tape was added to the large rectangle and it was popped up onto the base card.

The image was stamped onto the smaller rectangle using my MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. I coloured in the image and then with a paint brush and a small mixture of DecoArt Glamour Dust, FolkArt – Extreme Glitter Acrylic Paint and Delta Ceramcoat – White, I added in the first layer of snow. A little more DecoArt Glamour Dust was added to it while it was still wet. This dried pretty quickly and Cosmic Shimmer Fluffy Stuff and more glitter were added to give the snow some texture. I also added this to the hat, pompom and sign. Lastly, I added some Crystal – Stickles because you can never have enough glitter. LOL! Wink of Stella – Clear was added to the bows, side of the ball on the pole and down the entire pole. Pental Sunburst Metalic Med Gel Pen – Gold and Wink of Stella – Clear were added to the pink present dots. Once everything was dry, I stamped the sentiment using my MISTI and VersaMark ink. Ranger Embossing Powder White – Extra Fine Detail was applied over top of the ink and then heat embossed with Marvy Uchida – Embossing Heat Tool. The snow in the sky was created using a Gelly Roll Sakura #10 Pen. I applied U-Line double-sided tape to the back of the image and popped it up on top of the larger rectangle. To complete my card, I added in 4 YNS – Holly Jolly Sparkly Gumdrops in the corners.

Card Recipe:

Stamps: North Pole Penguin – TDG008 (High Hopes Rubber Stamps)

Sentiment: Seasons Greetings – F300A (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness, VersaMark

Paper: Copic Marker X-Press It Blending Card, Crate Paper – Boxed Cards – Mittens & Mistletoe (5.5″ x 4.25″), Forever In Time – Texture Rouge

Die Cuts: My Favourite Things – Die-namics – Elegant Rectangle Stax – MFT-1268

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cosmic Shimmer Fluffy Stuff, Crystal – Stickles, Pental Sunburst Metalic Med Gel Pen – Gold, DecoArt Glamour Dust, FolkArt – Extreme Glitter Acrylic Paint, Delta Ceramcoat – White, Cuttlebug, Wink of Stella – Clear, Marvy Uchida – Embossing Heat Tool, YNS – Holly Jolly Sparkly Gumdrops

Image coloured with Copic Markers:

Penguin: W9, W7, W5, W3, W00, E15, YR14, Y17, Y11, RV00, EE42, E41, E40, Colorless Blender (Eyes: Gelly Roll Sakura #10 Pen, Sakura Glaze – Black)

Hat, Scarf, Sign and Ribbon: R59, R37, R35

Presents: BG72, BG57, BG32, BG11, YR24, YR23, YR21, YR08, YG07, YG05, YG03, RV14, RV13, RV10

Pole: R46, R14, R08, C1, C00, Colorless Blender

Sky: B99, B97, B95, B93

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Ho Ho Ho!!

Oct11

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Santa In Chimney – S202 for the image. Christmas is only a few months away, so I’m busy making more Christmas cards for this year to give away! How about you?

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. DCWV – Holiday Cheer was cut to the same size and applied to the base using double-sided tape. The image was die-cut using Anna Griffin Empress Mini Cutting Machine, My Creative Time – Rectangle Frame Dies and Copic Marker X-Press It Blending Card. The image was stamped onto the Copic Marker X-Press It Blending Card using my MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. Once it was coloured in, I applied some Cosmic Shimmer Fluffy Stuff to his beard and then heat set it with a Marvy Uchida – Embossing Heat Tool to make it puff up. Stickles – Diamond was applied to the Coat trim and hat, as well as the roof. Stickles – Gold was applied all around the die-cut to create some extra sparkle. Stickles – Star Dust was applied to the insides of the background flowers and some snowflakes.  Once everything was dry, I added some U-Line double-sided tape and popped up the main coloured image onto the base card. For the sentiment, I die cut Recollections Christmas Ink Jet Printable Glitter Paper with the Anna Griffin Empress Mini Cutting Machine using Jolly Quickutz – Deck the Halls limited edition gift set. I applied Scrapbook Adhesives – 3D Foam Strips to the Sentiment and popped it up onto the card to finish it off.

Card Recipe:

Stamp: Santa In Chimney – S202 (High Hopes Rubber Stamps)

Sentiment: Jolly Quickutz – Deck the Halls limited edition gift set

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., DCWV – Holiday Cheer (6″ x 6″), Recollections Christmas Ink Jet Printable Glitter Paper

Die Cuts: Jolly Quickutz – Deck the Halls limited edition gift set, My Creative Time – Rectangle Frame Dies

Stickles: Diamond, Gold, Star Dust

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Anna Griffin Empress Mini Machine, Stickles – Diamond, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool, Scrapbook Adhesives – 3D Foam Strips

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20, Eyes (Sakura Glaze – Black)

Hair: C2, C1, C00

Coat and Hat Trim: C2, C1, C00, Stickles – Diamond

Clothing: R59, R37, R35

Belt and Mitts: 100, T9, T7, T5, E15, Y38, Y35, Y15

Sack: G99, YG67, YG63, YG61, R59, Y37, R35

Chimney: E97, E19, E08, T5, T3, T1

Roof: BV20, B60, C1, C00, Stickles – Diamond

Sky: B99, B97, B95, B93

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Merry Christmoose, Eh!!

Oct4

It’s Wednesday, and this week, I made a Christmas card for some friends overseas using High Hopes Rubber Stamps Canadian Christmas Greeting – R048 for the main image and Merry Christmoose, Eh! for the sentiment. The trees were added in using High Hopes Rubber Stamps Evergreen Tree HLF001 and Evergreen Tree 2 HLF002.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. The sky was added directly to the front of the base panel with a mixture of Tim Holtz Distress Inks – Salty Ocean, Tumbled Glass and Broken China and a Gina K. Designs blending brush. Lawn Fawn – Snowy Sky stencil and Stampin Up – Winter White were added next to create some falling snow in the background. Then, using the same stencil again, Brutus Monroe – Snow Paste was applied to add some glittering snowflakes. The sentiment was stamped onto Recollections Christmas Ink Jet Printable Glitter Paper using my MISTI and Memento – Tuxedo Black. The paper was then cut to be 5.5″ x 1″ and I tore along the top of the paper to create snow drifts. I did this once again with a larger size (5.5″ x 2.5″) to create some dimension. U-Line double-sided tape was added to both pieces, with a double-layer on the sentiment piece and they were both popped up onto the base card.

The images were stamped onto Copic Marker X-Press It Blending Card using my MISTI – Most Incredible Stamping Tool, Memento – Tuxedo Black for the main image and Memento – Cottage Ivy for the trees. After colouring the images, I fussy cut around all of them and popped up the main image behind the 1st snow hill. Liquid glue was applied behind the trees and they were tucked in behind the larger hill to complete the card.

Card Recipe:

Stamps: Canadian Christmas Greeting – R048 (High Hopes Rubber Stamps), Evergreen Tree HLF001 (High Hopes Rubber Stamps) and Evergreen Tree 2 HLF002 (High Hopes Rubber Stamps)

Sentiment: Merry Christmoose, Eh! (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Memento – Cottage Ivy, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Ranger Distress Ink – Broken China, Stampin Up – Winter White

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections Christmas Ink Jet Printable Glitter Paper

Stencil: Lawn Fawn – Snowy Sky

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sparkle Pen, Pental Sunburst Metalic Med Gel Pen – Silver, Cosmic Shimmer Fluffy Stuff

Image coloured with Copic Markers:

Moose: E53, E51, E50, E39, E37, E35, E34, E33, R30, Eyes (Sakura Glaze – Black)

Beaver: E49, E29, E27, E25, E23, Stickles – Diamond

Wreath, Holly Leaves and Bow: G99, YG67, YG63, YG61, R59, R37, R35

Belt: 100, T9, T7, T5, E15, Y38, Y35, Y15

Tambourine: E15, Y38, Y35, Y15, R59, R37, R35

Hat: R59, R37, R35, BV20, Colorless Blender, Stickles – Diamond

Baubles: V17, V15, V12, C3, C2, C0, Gelly Roll Sparkle Pen, Pental Sunburst Metalic Med Gel Pen – Silver, Stampin Up – Winter White, Brutus Monroe – Snow Paste

Candy Cane: R59, R37, R35, Gelly Roll Sparkle Pen

Beard: Cosmic Shimmer Fluffy Stuff

Sky: B99, B97, B95, B93, Brutus Monroe – Snow Paste, Stampin Up – Winter White

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Sparkle & Cheer!!

Jul27

It’s Wednesday, and this week, I made a Christmas slim-line card using High Hopes Rubber Stamps Christmas Gofer – TDG003 for the image and Sparkle & Cheer – LDG001 for the sentiment. This little gofer is all set to start decorating his tree for Christmas. With all of this heat right now, snow is sounding pretty good to cool off a bit. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 4″ x 8″. I cut the background to be the same size using Creative Memories – Glacier paper and adhered it to the base card using double-sided tape. I die cut Recollections – White Cardstock and Signature Collection by Sara Davies – Glittering Snowflakes cardstock using my Anna Griffin Empress Mini Machine and My Favourite Things – Die-namics – Elegant Rectangle Stax dies. I stamped the sentiment onto the white cardstock using Memento – Tuxedo Black ink and my MISTI. Using my die cutting machine again and Waffle Flower – Nesting Square dies, I die cut Copic Marker X-Press It Blending Card. I stamped the image onto it using Memento – Tuxedo Black ink and my MISTI.

The image was coloured in with Copic markers and then I added snow to the sky using a Gelly Roll Sakura #10 Pen. For the hat trim and pop-pom, I added Cosmic Shimmer Fluffy Stuff and heated it with my Marvy Uchida – Embossing Heat Tool to puff up the liquid. I put a little bit of Stickles – Diamond onto my finger and dabbed it across the trim and pom-pom to give them an extra bit of sparkle. Lastly, I added some Stickles – Diamond to the snow. When the Stickles was all dry, I adhered the image to Signature Collection by Sara Davies – Glittering Snowflakes cardstock with double-sided tape and some glue. Using my cutter, I cut a slim border around the image. I ran the sentiment through my Xyron Creative Station and adhered it to the larger die cut. U-line double-sided tape was added behind the 2 pieces and they were both popped up onto the card. Lastly, to finish the card off, I added a few YNS Gumdrops – White Sugar and Sparkle to both sides of the sentiment.

Card Recipe:

Stamp: Christmas Gofer – TDG003 (High Hopes Rubber Stamps)

Sentiment: Sparkle & Cheer – LDG001 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Creative Memories – Glacier Paper Pack 12″ x 12″, Signature Collection by Sara Davies – Glittering Snowflakes, Recollections – White Cardstock

Die Cuts: My Favourite Things – Die-namics – Elegant Rectangle Stax – MFT-1268, Waffle Flower – Nesting Square dies

Tools: MISTI – Most Incredible Stamping Tool, Anna Griffin Empress Mini Machine, U-Line double-sided tape, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Stickles – Diamond, YNS Gumdrops – White Sugar and Sparkle, Xyron Creative Station

Image coloured with Copic Markers:

Gofer: E49, E47, E27, E25, E23, E21, R30, R20

Hat and Scarf: BG09, BG05, BG02, BG01, C2, C1, C00, Cosmic Shimmer Fluffy Stuff, Stickles – Diamond

Baubles: R59, R37, R35, YG17, YG09, YG07, YG05, C3, C2, C0

Snow: B60, B00, Stickles – Diamond

Sky: B99, B97, B95, B93, B91

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Santa…I Tried!!

Jul20

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Reindeer Games – S108 for the image and Santa…I Tried – FLL001 for the sentiment. It’s never too early to start making Christmas cards and I couldn’t resist this super fun image and sentiment paired together. It just makes me laugh and I hope it makes you laugh too! I don’t think the reindeer worked very hard, I think he just wanted Santa to pull the sleigh while he relaxed. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I cut the background to be the same size using Stampin UP! – ‘Tis The Season paper and adhered it to the base card using double-sided tape. Using Tim Holtz Distress Ink – Rustic Wilderness and a finger dauber, I inked around all of the edges of the card. Using my Cuttlebug and My Creative Time – Rectangle Frame Dies, I die cut Forever In Time – Texture Rouge paper. I added some U-Line double-sided tape to it and popped it up on top of the patterned paper. Using Copic Marker X-Press It Blending Card, my Cuttlebug and My Creative Time – Rectangle Frame Layers, I die cut Copic Marker X-Press It Blending Card cardstock.

The image was stamped with Memento – Tuxedo Black ink onto the die cut using my MISTI – Most Incredible Stamping Tool. I coloured in the image and background with Copic Markers. I added in the puffy Santa trim and pop-pom using Cosmic Shimmer Fluffy Stuff. This was then heated with my Marvy Uchida – Embossing Heat Tool to puff up the liquid. For the blue tints in the snow, I first coloured them in with Copic Marker – B60 and then using a Ranger – Emboss It Pen Clear and Stampendous – Frozen Ice Tinsel Embossing Powder, I heat embossed the snow drifts. I stamped the sentiment using my MISTI, Versamark and Ranger Embossing Powder White – Extra Fine Detail. This again was heated with my heating tool. Then, I added in the snow in the sky with a Gelly Roll Sakura #10 Pen. Lastly, I added Stickles – Diamond to add some more sparkle to the snow on the ground and Stickles – Holly all around the frame of the coloured image. I set this all aside to dry for a few hours and then applied U-Line double-sided tape to the back of the coloured image and popped it up onto the red rectangle. To finish off the card, I added in 3 pop-dots from YNS Gumdrops – Milk and Cookies – Matte.

Card Recipe:

Stamp: Reindeer Games – S108 (High Hopes Rubber Stamps)

Sentiment: Santa…I Tried! – FFL001 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Stampin UP! – ‘Tis The Season (6″x6″), Forever In Time – Texture Rouge

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers

Embossing Powders: Stampendous – Frozen Ice Tinsel Embossing Powder, Ranger Embossing Powder White – Extra Fine Detail.

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, U-Line double-sided tape, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool, Ranger – Emboss It Pen Clear, Gelly Roll Sakura #10 Pen, Stickles – Diamond, Stickles – Holly, YNS Gumdrops – Milk and Cookies – Matte

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20, Eyes (Sakura Glaze – Black)

Hair and Beard: C3, C1, C0, Colorless Blender

Clothing: R59, R37, R35

Sleigh: R59, R37, R35, C5, C3, C1, E27, E25, E23

Mitts and Scarf: G29, G28, G24

Reindeer: E53, E51, E50, 37, E35, E34, E33, R30, R20

Hoofs and Boots: T9, T7, T5

Rope: Y19, Y17, Y15

Sky: B99, B79, B69, B29, B26, B24

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Beautiful Day!!

Jan18

It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Winter Kitty – SDG006  for the main image and Beautiful Day – FDG013 for the sentiment. We just had a major snowfall over the last few days and this little kitty is all bundled up and ready to play!

Growing up we had a lot of snow during the winter and couldn’t wait to put on our mitts and snow boots and go out to play. We had huge snow banks in the schoolyard across the street and would toboggan down them or just slide down in our snow suits! LOL! It was sooooo much fun! Sometimes we even made big snow forts in the backyard with tables and chairs made out of ice and snow. We hardly spent anytime indoors and didn’t usually go back into the house until we had to or we were turning blue because it was so cold out, but even then we still wanted to continue playing outdoors. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I used Scrapbook.com – Rainbow Smooth Cardstock for the main background paper. It was already the same size as the base, so no cutting had to be done. To get more use out of the same paper, I had cut the oval frame using my Cuttlebug and Hero Arts – Infinity Die Ovals first. Then, I placed the Rainbow cardstock onto the card base using double-sized tape. I die cut the square background using My Creative Time -Stitched Squares Inside and Out and Pebbles – Winter Wonderland paper and the rectangle to the size of 4″ x 4″. The rectangle was cut from from the same paper pack to the size of 1.25″ x 4″. I inked around the edges of both shapes with a sponge dauber and Tim Holtz Distress Ink – Evergreen Bough. Using double-sided tape, I placed both shapes over the pink background and hid where I cut the oval with the square. I cut out a smaller oval using the same Hero Arts – Infinity Die Ovals and Copic Marker X-Press It Blending Card. I also cut out a 1.5″ circle using a circle punch. Lastly, I die cut the scalloped circle using WeR Memory Keepers – Quickutz Nesting Scallops dies and Hot Buy Craft Smart – Holiday Glitz Glitter Paper.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock oval and the sentiment onto the circle. I coloured in the image with Copic markers and then added some Ranger – Emboss It Pen Clear to the bottom of the oval and applied WOW! Sparkling Snow Embossing Glitter. I heat embossed this and added more embossing powder several times to create a thicker layer with my Marvy Uchida – Embossing Heat Tool. Then I added some Cosmic Shimmer Fluffy Stuff and heat embossed it as well to puff it up. Gelly Roll Sakura #10 Pen was used to create the snow in the sky. Sakura Glaze – Black and Gelly Roll Sakura #5 Pen were used on the eyes and nose of the cat.

I inked around the edges of the large pink oval and the circle with Tim Holtz Distress Ink – Picked Raspberry. I applied the coloured image directly to the pink oval and the sentiment circle to the scalloped circle using some liquid glue. Both shapes were then popped up onto the card using U-Line double-sided tape. To completed the card and add in some extra sparkle, I applied some YNS Gumdrops – Winter Wonderland to the background patterned paper.

Card Recipe:

Stamp: Winter Kitty – SDG006 (High Hopes Rubber Stamps)

Sentiment: Beautiful Day – FDG013 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Ink – Picked Raspberry, Ranger – Emboss It Pen Clear

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Scrapbook.com – Rainbow Smooth Cardstock (4.25″ x 5.5″), Pebbles Winter Wonderland 6″ x 6″, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Hero Arts – Infinity Die Ovals, WeR Memory Keepers – Quickutz Nesting Scallops, 1.5″ Circle Punch

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Cuttlebug, YNS Gumdrops – Winter Wonderland

Image coloured with Copic Markers:

Kitty: N7, N5, N3, R02, R00, RV66, RV63, RV55 (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Sky: B05, B04, B02, Gelly Roll Sakura #10 Pen

Snow: WOW! Sparkling Snow Embossing Glitter, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Owl Christmas!!

Dec18

Sharing a Christmas card I made today using Gerda Steiner Designs – Owl I Want For Christmas. THANK YOU SO MUCH Gerda Steiner for giving me the opportunity to win this super adorable stamp from playing your amazing Advent Calendar this year. This was one of the prizes for door #7. I couldn’t wait to create this card with it.

To make the card, I created the base using Hammermill – Premium Colour 100 lb. to the size of 5.5″ x 4.25″. I cut Creative Memories – Glacier Designer Paper to be the same size as the base and adhered it to the card using double-sided tape. Tim Holtz Distress Ink – Chipped Sapphire was used to ink around all of the edges of the card. The image was imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. Using my Cuttlebug and dies from Creative Expressions Craft Dies by Sue Wilson – Festive Collection – Holly Lattice Frame, I die cut the printed image and also golden background frame using Crafter’s Companion – Luxury Cardstock – Gold paper.

I coloured in the image with Copic markers and also added in the tree trunk. Using a Gelly Roll Sakura #10 Pen, I added snow to the sky, along the branches of the tree and on top of the pine cones. Cosmic Shimmer Fluffy Stuff combined with WOW! Embossing Glitter – White Puff Twinkle were added to the hat and pompom and then heated with a Marvy Uchida – Embossing Heat Tool to make it puff up. U-Line double-sided tape was applied to backs of the image and the gold die cut and both were popped up onto the background. Finally, I added some Stickles – Diamond over top of the snow I created on the tree trunk and pine cones.

For the sentiment, I used a Recollections 1″ circle punch to cut some green cardstock and then using my MISTI, I stamped the sentiment from Penguin Party – Lawn Fawn with VersaFine ink. I added Ranger Embossing Powder White – Extra Fine Detail and heat embossed it with my Marvy Uchida – Embossing Heat Tool. I inked around the edges of the circle with Tim Holtz Distress Ink – Pine Needles. This was popped up with U-Line double-sided tape and I added the embellishment from Recollections – Snowflake Specialty Polyester Glitter. To create the pine cone and pine needles, I used some scraps of brown and green paper and using my Cuttlebug, I die cut the shapes using Sizzix – Tim Holtz – Festive Greens 662425. I used glue to adhere the pieces together and then popped up the completed piece onto the card using U-Line double sided tape.

Card Recipe:

Stamp and sentiment: Owl I Want For Christmas – Gerda Steiner Designs

Stamp and sentiment: Penguin Party – Lawn Fawn

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Pine Needles, Tim Holtz Distress Ink – Chipped Sapphire

Die Cuts: Sizzix – Tim Holtz – Festive Greens 662425, Creative Expressions Craft Dies by Sue Wilson – Festive Collection – Holly Lattice Frame – CED3125, Recollections 1″ Circle Punch

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Creative Memories – Glacier Designer Paper Pack 12 x 12″, Crafter’s Companion – Luxury Cardstock – Gold

Embossing Powder \ Liquid: WOW! Embossing Glitter – White Puff Twinkle, Cosmic Shimmer Fluffy Stuff, Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Recollections – Snowflake Specialty Polyester Glitter

Image coloured with Copic Markers:

Owl: E47, E44, E43, YR24, Y38, Y35, Y32, Y23, C9

Hat: R59, R37, R35

Sweater: R59, R37, R35, BG09, BG05, BG02, BG1

Tree, Limb and Pine Cones: E49, E47, E42, E40, E29, E27, E25, E23, G29

Ornaments: R59, R37, R35, R22, BG09, BG05, BG02, BG1, BG000, Y38, Y35, Y32

Sky: B99, B97, B95, B93

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Santa Candy Cane

Dec14

Today, I’m featuring this adorable Santa image from Conie Fong Art called Holiday Gnomes Bundle By Conie Fong.

For the base card, I used Hammermill – Premium Colour 100 lb. cardstock and cut it and scored it to be 5.5″ x 5.5″. For the background, I cut Craft Smith – Peppermint Twist paper to the same size as the base card and inked around the edges with Tim Holtz Distress Inks – Candied Apple. I adhered this to the base card with double-sided tape. AC – Green cardstock was die cut with my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider dies. Tim Holtz Distress Inks – Peeled Paint was used to ink around all of the edges and it was popped up onto the base card using U-Line double-sided tape.

The image using HP High Quality Grayscale was printed onto Copic Marker X-Press It Blending Card and die cut using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider dies. The image was coloured in with Copic markers and Cosmic Shimmer Fluffy Stuff and WOW! Sparkling Snow Embossing Glitter were added to the brim of the hat and pompom. Ranger – Emboss It Pen Clear was added in parts at the bottom for snow and WOW! Sparkling Snow Embossing Glitter was applied. The hat, pompom and snow were all then heat embossed using my Marvy Uchida – Embossing Heat Tool. Stickles – Crystal was also added to the snow to add a little more sparkle. Lastly, using a Gelly Roll Sakura #10 Pen, I added snow to the background sky. The finished image was popped up onto the green cardstock using U-Line double-sided tape and Kraftin’ Kimmie – Christmas Dots were added to complete the card.

Card Recipe:

Stamp: Holiday Gnomes Bundle by Conie Fong

Inks: HP High Quality Grayscale, Tim Holtz Distress Inks – Candied Apple, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Craft Smith – Peppermint Twist 6×6 in., American Crafts – Green Cardstock

Die Cuts: Essentials by Tattered Lace Dies – Easel Slider

Miscellaneous: U-Line double-sided tape, Stickles – Crystal, Gelly Roll Sakura #10 Pen, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20

Beard: C2, C1, C0, BV20

Hat and Clothing: R59, R37, R35, WOW! Embossing Glitter – White Puff Twinkle, Cosmic Shimmer Fluffy Stuff, Ranger – Emboss It Pen Clear

Shoes: C9, C7, C5, C3

Candy Cane: C1, C0, C00, Colorless Blender, Spectrum Noir Sparkles – Red Berry, Spectrum Noir Sparkles – Clear

Bow: G14, G07, YG23, YG11

Sky: C7, B99, B97, B95

Snow: B60, C1, Stickles – Diamond, Cosmic Shimmer Fluffy Stuff, WOW! Sparkling Snow Embossing Glitter, Ranger – Emboss It Pen Clear

Hope you like it and have a great week!

 

Dress Up The Christmas Tree!!

Dec10

Today, I’m sharing a card using Dreamerland Crafts stamps called Mix and Match Clear Stamps – DCS19090.  These little woodland creatures are enjoying their new tree on a snowy evening. Do you have an outdoor Christmas tree?

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Using my Cuttlebug and My Creative Time – Rectangle Frame Dies, I die-cut Crafter’s Companion – Luxury Cardstock – Gold to the size of 5.5″ x 4.25″ and adhered it to the base using double-sided tape. Your Next Die – Stiched Frame Snowfall Hill was used to die cut Creative Memories – Glacier Designer Paper Pack for the snow frame and glued to the base background. With My Creative Time – Rectangle Frame Dies, I also die cut Copic Marker X-Press It Blending Card cardstock to the size of 4.5″ x 3.25″.

I stamped the image using my MISTI and Memento – Tuxedo Black ink onto the Copic Marker X-Press It Blending Card cardstock. I coloured in the image with Copic Markers. The sentiment was added using Versamark and Ranger Embossing Powder White – Extra Fine Detail. This was heated up with a Marvy Uchida – Embossing Heat Tool. The background snow was applied with a Gelly Roll Sakura #10 Pen. Crayola – Yellow Glitter Glue was applied to the glow around the star of the tree and Cosmic Shimmer Fluffy Stuff combined with WOW! Sparkling Snow Embossing Glitter was used to create the snow on the bottom. Stickles – Diamond was applied between the snow drifts to create a little more glitter. Nuvo Crystal Drops – Dandelion Yellow, Red Berry and Caribbean Ocean were applied to the tree for decorations. Once everything was dry, I applied U-Line double-sided tap to the back of the coloured image and applied it to the base to complete the card.

Card Recipe:

Stamp: Mix and Match Clear Stamps – DCS19090 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafter’s Companion – Luxury Cardstock – Gold, Creative Memories – Glacier Designer Paper Pack 12 x 12″

Die Cuts: My Creative Time – Rectangle Frame Dies, Your Next Die – Stiched Frame Snowfall Hill

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, WOW! Sparkling Snow Embossing Glitter

Nuvo Crystal Drops: Dandelion Yellow, Red Berry, Caribbean Ocean

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Crayola – Yellow Glitter Glue, Cosmic Shimmer Fluffy Stuff, Stickles – Diamond

Image coloured with Copic Markers:

Bear and Scarf: E53, E51, E50, E37, E35, E34, E33, E31, E30, R59, R37, R35, R02, R00

Rabbit and Scarf: R59, R37, R35, R02, R00, BV23, BV20, Colorless Blender

Tree, Star and Base of Tree: G99, YG67, YG17, G21, Y17, Y15, Y13. Y04

Sky: B99, B97, B95, B93

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Sparkle All The Way!!!

Dec7

It’s Wednesday, and this week, I made a Christmas card using Snowbear Friends – TDG009 by High Hopes Rubber Stamps for the main image and Sparkle – FDG011 (High Hopes Rubber Stamps) for the sentiment. This month we are celebrating our new Woodland Winter Release at High Hopes Stamps.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I die cut Copic Marker X-Press It Blending Card with my Cuttlebug and My Creative Time – Rectangle Frame Layers. With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the die cut and the sentiment onto Copic Marker X-Press It Blending Card. I coloured the image in with Copic markers and added in the snow in the sky with Gelly Roll Sakura #10 Pen. I added in the tree decorations using a combination of Nuvo Crystal Drops: Red Berry, Dandelion Yellow and Carribean Dream. Pental Sunburst Metalic Med Gel Pen – Silver and Pental Sunburst Metalic Med Gel Pen – Gold were used to create stripes and colour in circles on the presents. Cosmic Shimmer Fluffy Stuff was applied to the brim of their hats and pom-poms and heat embossed with my Marvy Uchida – Embossing Heat Tool. A little bit of Stickles – Diamond was added onto top of the brims and pompoms to make them sparkly.  I added in the snow on the bottom using a spatula and Nuvo Glimmer Paste – Moonstone and let it dry. Once it was dry, I added in some Cosmic Shimmer Fluffy Stuff to give the snow a little more texture. This too, was heat embossed with my Marvy Uchida – Embossing Heat Tool. I adhered the image to the base card using double-sided tape and Stickles – Diamond was added to the top and side of the sign to complete the card.

Card Recipe:

Stamp: Snowbear Friends – TDG009 (High Hopes Rubber Stamps)

Sentiment: Sparkle – FDG011 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: My Creative Time – Rectangle Frame Layers

Nuvo Crystal Drops: Red Berry, Dandelion Yellow, Carribean Dream

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Cosmic Shimmer Fluffy Stuff, Stickles Diamond, Nuvo Glimmer Paste – Moonstone

Image coloured with Copic Markers:

Polar Bears: BV23, BV20, B60, R02, R00, RV00, C9, C7, C5

Hats and Scarves: R59, R46, R37, R35, R14, R08, BG72, BG57, BG32, BG11, BG09, BG05, BG02, BG01, Cosmic Shimmer Fluffy Stuff

Tree: G99, G21, YG67, YG17

Sign: R59, R37, R35, C2, C1, C00

Gifts and Bows: BG72, BG57, BG32, BG11, BG09, BG05, BG02, BG01, R46, R14, R08, E15, Y28, Y26, Y17, Pental Sunburst Metalic Med Gel Pen – Silver, Pental Sunburst Metalic Med Gel Pen – Gold

Sky: B06, B05, B04, B03, B02, B01

Snow: C3, C00, BV20, B000, Nuvo Glimmer Paste – Moonstone, Stickles – Diamond

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Christmas Penguins!!!

Nov30

It’s Wednesday, and this week, I made a Christmas card using Christmas Penguins – TDG004 by High Hopes Rubber Stamps for the main image and Happy Holidays – FDG006 (High Hopes Rubber Stamps) for the sentiment. This is just a sneak peek to all of the wonderful images coming soon on Monday, December 6, 2022 as we celebrate our Woodland Winter Release for the month of December at High Hopes Stamps.

 

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I die cut Copic Marker X-Press It Blending Card with my Cuttlebug and My Creative Time – Rectangle Frame Layers. With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the die cut and the sentiment onto Copic Marker X-Press It Blending Card. I coloured the image in with Copic markers and added in the snow in the sky with Gelly Roll Sakura #10 Pen. I combined Cosmic Shimmer Fluffy Stuff and WOW! Embossing Glitter – White Puff Twinkle for their hats and pom-poms and heat embossed them with my Marvy Uchida – Embossing Heat Tool. I added in the snow on the bottom with Cosmic Shimmer Fluffy Stuff and Sprinkled some WOW! Sparkling Snow Embossing Glitter on as well after using a Ranger – Emboss It Pen Clear in spots. This too, was heat embossed with my Marvy Uchida – Embossing Heat Tool. Lastly, I added in some Stickles – Diamond for snow as well. I love sparkle. LOL! Using double-sided tape, I adhered the finished scene to the base card. I rounded the sentiment with a 1/4″ rounder on the top and cut the 2 bottoms at a diagonal. Copic Marker R37 was used to go around the edges. I popped this onto the finished image using U-Line double-sided tape to complete the card.

Card Recipe:

Stamp: Christmas Penguins – TDG004 (High Hopes Rubber Stamps)

Sentiment: Happy Holidays – FDG006 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: My Creative Time – Rectangle Frame Layers

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Ranger – Emboss It Pen Clear

Image coloured with Copic Markers:

Penguins: W9, W7, W5, W3, W00, E15, YR14, Y17, Y11, RV00, E43, E42, E41, E40

Hats and Bow for Penguin: R59, R37, R35

Holly and Bow: G14, G07, YG23, YG11

Large Gift and Small Gift: BG72, BG57, BG32, BG11, Y17, Y15, Y13

Medium Gift: V17, V15, V12

Long Gift: RV66, RV63, RV55

Ribbons: Y38, Y35, Y32, RV66, RV63, RV55

Sky: B05, B04, B03, B02

Snow: BV06, Cosmic Shimmer Fluffy Stuff, WOW! Sparkling Snow Embossing Glitter, WOW! Embossing Glitter – White Puff Twinkle, Stickles – Diamond

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Christmas Dragon

Nov23

Come and check us out on Passionate Paper Creations & Friends FB group
as we are currently sponsoring Lee Holland Art,  Lee Holland Illustration Inspiration Facebook Group for the month of November.

Check out the Etsy store for more fantastic designs from Lee Holland Art. You can click on any of the links above or you can click here too:  https://www.etsy.com/ca/shop/leehollandart. There is a 50% off Black Friday sale going on. You should check it out!

Jump over to Passionate Paper Creations & Friends. Not a Member? Come Join! https://bit.ly/2VwG9iz.

If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Lee Holland Art has been sponsoring us throughout the month of November at  Passionate Paper Creations & Friends FB group site!! Today, I’m featuring this adorable dragon image from Lee Holland Art called Reindeer Antlers Christmas Dragon. Thank you Lee Holland Art for sponsoring us and having such amazing fun designs to choose from. I love all of your little dragons.

 

For the base card, I used AC Cardstock – White and cut it and scored it to be 6″ x 6″. For the background, I cut Creative Memories – Mermaid Cove Designer Paper to the same size as the base card. The image using HP High Quality Grayscale was printed onto Copic Marker X-Press It Blending Card. Using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider dies, the printed image and Hot Buy – Recollections Ombre Brights Paper were both die cut. The sentiment was stamped using my Misti, VersaMark Ink and sentiment stamps from Lawn Fawn – “Offset Sayings – Christmas” and Lawn Fawn “Winter Skies”. Ranger Super Fine Gold Embossing powder was applied to the stamped sentiments and then heat set with a Marvy Uchida – Embossing Heat Tool.

I cut the sentiment down to be 3-3/8″ x 1-2/8″ and then used W R Memory Keepers – Crop-A-Dile Corner Chomper to create .25″ corners. Using a Sharpie – Gold Medium Point – Water Based Paint pen, I went around all of the edges of the cuts with the exception of the image die cut. The image was coloured in with Copic markers and then I used a Gelly Roll Sakura #10 Pen to create the snow in the sky and a combination of Stickles – Crystal, Stickles – Waterfall and Cosmic Shimmer Fluffy Stuff which was applied prior to the Stickles being added.

The card was now ready to be assembled. I applied U-Line double-sided tape to the backs of the coloured image and cut frame to pop them up. I doubled up the tape for behind the sentiment. The base paper was applied directly to the card base using double-sided tape. I peeled off the tape from the backings of the elements and popped them all up onto the base card to finish it off.

Card Recipe:

Stamp: Reindeer Antlers Christmas Dragon – Lee Holland Art

Sentiments: Offset Sayings – Christmas – Lawn Fawn,  Winter Skies – Lawn Fawn

Inks: HP High Quality Grayscale, Versamark

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Creative Memories – Mermaid Cove Designer Paper Pack, Hammermill – Premium Colour 100 lb., Hot Buy – Recollections Ombre Brights Paper Pack (12″ x 12″)

Die Cuts: Essentials by Tattered Lace Dies – Easel Slider

Miscellaneous: U-Line double-sided tape, Sharpie – Gold Medium Point – Water Based Paint, Stickles – Crystal, Stickles – Waterfall, Gelly Roll Sakura #10 Pen, W R Memory Keepers – Crop-A-Dile Corner Chomper Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Dragon: BG72, BG57, BG32, BG11, BG09, BG05, BG02, BG01, V15, V12, V06. V000, G14, YG23, YG11, YG03, YG01

Box: E27, E25, E23

Ornaments: R59, R37, R35, E15, Y35, YR24, Y08, YG67, YG17, YG21, E35, E34, E33, E31

Sky: B05, B04, B02, B01, Gelly Roll Sakura #10 Pen

Snow: B60, C1, Stickles – Crystal, Stickles – Waterfall, Cosmic Shimmer Fluffy Stuff

Hope you like it and have a great week!

Time to Celebrate!!

Oct4

Today, I’m sharing a Christmas card using Dreamerland Crafts stamps called Let’s Celebrate – D19074 for the main image and Christmas Snow Scene – M18313 for the background. For the sentiment, I used Holiday Sentiments Set 001 – D163001. 

 

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. My Cuttlebug and My Creative Time – Rectangle Frame Layers Die were used to die-cut Copic Marker X-Press It Blending Cardstock. Using the background stamps, I stamped the background using my MISTI and Memento – Summer Sky ink. I coloured in the sky, trees and house with Copic markers and then added some snow using Gelly Roll Sakura #8 Pen. Once this was done, I added Gina K Designs – Glitz Glitter Gel – Iridescent to the remainder of the die cut for the sparkling snow. I added a little bit more where the boys feet would land and set it aside to dry. Once again, I used my MISTI and Memento – Tuxedo Black ink and stamped the main images. I coloured them in with Copic markers and then applied Ranger – Emboss It Pen Clear to the fur trims for the hats and clothing. I applied WOW! Sparkling Snow Embossing Glitter to the inked areas and then heat embossed everything with my Marvy Heat Embossing Tool. For the pompoms, I applied Cosmic Shimmer Fluffy Stuff and then heat embossed the liquid for it to puff up. For the present, I added some gold swirls using a Pental Sunburst Metalic Med Gel Pen. Then I fussy cut around the images leaving a thin white border. I stamped the sentiment using my MISTI and Lawn Fawn – Peacock Ink on to the base card. Then I stamped it again, this time using Versamark ink and then added Ranger – Clear Super Fine Detail embossing powder and heat embossed it.

The card was now ready to assemble. Using double-sided tape, I attached the background to the scalloped border. I added 3M double-sided tape to the back of the scalloped border and popped it up onto the base card. Using 3M double-sided tape, I popped up the main image and present onto the background. A little more of the Stickles – Diamond was added to snow where his feet are to complete the card.

Card Recipe:

Stamps: Let’s Celebrate – D19074 – Dreamerland Crafts, Christmas Snow Scene – M18313 – Dreamerland Crafts

Sentiment: Holiday Sentiments Set 001 – DS163001 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark, Lawn Fawn – Peacock Ink, Memento – Summer Sky ink

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hot Buy – Recollections – Jewel Tones

Die Cuts: My Creative Time – Rectangle Frame Layers, Gina Marie Designs – Nested Scalloped Stitched Rectangles

Stickles: Diamond

Embossing Powder: WOW! Sparkling Snow Embossing Glitter, Cosmic Shimmer Fluffy Stuff, Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug,  Marvy Heat Embossing Tool, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #5 Pen, 3M VHB – 2 sided tape and Pental Sunburst Metalic Med Gel Pen

Image coloured with Copic Markers:

All Eyes and Small Noses:  Sakura Glaze – Black pen, Gelly Roll Sakura #5 Pen

Skin: E21, E11, E00, E000, R30, R22, R20

Hair: E47, E44, E43

Clothing and Hat: B37, B14, B12

Mitts: YG67, YG63, YG61

Boots: C8, C6, C4, C2, C1

Bear: E57, E55, E53, E51

Pig: E95, E93, R00, R000

Rabbit: C2, C1, C00, R30, R20

Present and Bow: BG09, BG05, BG02, BG01, E15, Y38, Y15, Y08

House: E40, E41, E30, E18, E15, Y04

Trees: G99, G21, YG67, YG17

Sky: B04, B02, B01, B00

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Santa’s New Ride!!!

Sep29

It’s Wednesday, and this week, I made a Christmas card using Flyin’ High Santa – T093 by High Hopes Rubber Stamps for the main image and Here Comes Santa Claus – G272 (High Hopes Rubber Stamps) for the sentiment. Santa’s giving his reindeer a rest this year as he checks out his new ride. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I cut the background paper from Creative Memories – Glacier Paper Pack to be the same size and applied this directly to the base card using double-sided tape. I took a small scrap of Recollections – Black cardstock and ran it through my Xyron Create a Sticker so that it would become a sticker. With my Cuttlebug and Joy Crafts – Lin & Len Design 1201/0027, I die cut the silhouette out of the black paper and then peeled off the backing and placed it directly to the bottom of the card. Stampendous – Snowflakes – Chunky White was sprinkled over top of the card and melted from the bottom of the card using my Marvy Uchida – Embossing Heat Tool.

With my MISTI and Memento – Tuxedo Black ink, I stamped both the image and the sentiment onto Copic Marker X-Press It Blending Card. I cut the sentiment in half using my cutter and ran it through the Xyron Create a Sticker. I placed the sticker on top of some Recollections – Black cardstock and cut it again using my small cutting tool. I coloured in the image with Copic markers and then I fussy cut around it. With a Gelly Roll Sakura #8 Pen, I coloured in the candy cane swirls on the airplane and small circles. Once it was dry, I used Gelly Roll Stardust – Clear to go over the big yellow gumdrop, the swirls on the propeller, the candy cane swirls, small circles on the plane and the star on the tree to add some glitter. For Santa’s cuffs, coat trim and hat, I used Ranger – Emboss It Pen Clear and sprinkled on some WOW! Sparkling Snow Embossing Glitter. I heated this with my Marvy Uchida – Embossing Heat Tool and then repeated the process to give it more texture. For Santa’s pop pom, I applied a little bit of Cosmic Shimmer Fluffy Stuff and then heat embossed it with my Marvy Uchida – Embossing Heat Tool.

The Santa image and sentiment were both popped up onto the background using 3M double-sided tape to complete the card.

Card Recipe:

Stamp: Flyin’ High Santa – T093 (High Hopes Rubber Stamps)

Sentiment: Here Comes Santa Claus – G272 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Creative Memories – Glacier Paper Pack (12″ x 12″), Recollections – Black cardstock

Die Cut: Joy Crafts – Lin & Len Design 1201/0027

Embossing Powder: WOW! Sparkling Snow Embossing Glitter, Stampendous – Snowflakes – Chunky White

Tools: MISTI – Most Incredible Stamping Tool, 3M – 2 sided tape, Gelly Roll Stardust – Clear, Xyron Create a Sticker, Cosmic Shimmer Fluffy Stuff, Cuttlebug, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #8 Pen, Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen, Ranger – Emboss It Pen Clear

Image coloured with Copic Markers:

Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen

Skin: E21, E11, E00, E000, R30, R20

Beard: C1, C0, C00, Colorless Blender

Santa Hat, Clothing, Mitts: R59, R37, R35, YG67, YG63, YG61, WOW! Sparkling Snow Embossing Glitter, Cosmic Shimmer Fluffy Stuff

Airplane: R29, R27, R22, R17, G14, YG23, YG01, BG0000, C5, C3, C2, C1, C0, C00, Colorless Blender, Gelly Roll Stardust – Clear

Star and Present Bow: Y17, Y13, Y04, BG07, BG05, BG02, BG01, Gelly Roll Stardust – Clear

Christmas Tree, Propeller and Leaves: G14, YG23, YG01, Y17, Y13, Y04, Gelly Roll Stardust – Clear

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.