Tag Archive | Tim Holtz Distress Ink – Evergreen Bough

Unicorn Birthday!

May29

Today, I’m sharing a slim-line birthday card using Gerda Steiner Designs – Moody Unicorns (GSD471) for the May Share Your Designs Challenge.

 

To create the card, I began with a card base of 9.5″ x 7″ using Hammermill – Premium Colour 100 lb. cardstock. I searched my die collection to find the perfect oval and couldn’t find any to fit the images that I had in mind. Since I own a Cricut Explore machine, I thought why not make my own front panel? To do this, I signed into Cricut Design Space to create the slim-line design.

I used the free shapes and selected the square, which I re-porportioned to be 9.5″ x 7″. I imported Scalloped Oval (#M41B9A) from the Baby Steps cartridge. I then duplicated this image several times and used the slice tool to die cut the rectangle in 3 places and the ovals in several places until I was satisfied with the final result. Once I loaded my mat and had selected “Make it”, I chose 2 patterned papers from Craft Smart – Hot Buy – Kawaii Dream. The Unicorns were used for the main panel and the purple pattern was used for the back panel. For the larger scalloped oval,Hot Buy – Recollections – Jewel Tones paper was used and for the smaller scalloped oval, Recollections – Purple Passions was used.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image from Gerda Steiner Designs – Moody Unicorns (GSD471). The images were coloured in with Copic markers  and then Stickles – Diamond was applied to the manes, tails and cupcake icing. With my MISTI and VersaMark ink various sentiments from the same stamp set were stamped onto Recollections – Purple Passions paper. These were then embossed with Ranger Embossing Powder White – Extra Fine Detail. Marvy Uchida – Embossing Heat Tool was then used to heat emboss the embossing powder. All of the sentiments were then cut using a small slicer device.

To assemble the card, I applied liquid glue to the large patterned purple rectangle and applied it directly to the base card. For the front panel, I first glued on the larger scalloped ovals and then applied the smaller scallops in the same way. The completed piece was then glued on top of the purple patterned paper. Each of the little unicorns and the sentiments were popped up onto the card using U-Line double-sided tape. Lastly, Tim Holtz Distress Ink – Evergreen Bough was applied around the edges of the card with a small finger dauber and Stickles – Diamond was added to the hearts to make them sparkle.

Card Recipe:

Stamp: Gerda Steiner Designs – Moody Unicorns (GSD471)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Purple Passions 8.5″ x 11″, Craft Smart – Hot Buy – Kawaii Dream (12″ x 12″), Hot Buy – Recollections – Jewel Tones (12″ x 12″)

Cricut Explore and Cricut Design Space: Scalloped Oval (#M41B9A) – Baby Steps, Shapes – Rectangle

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: U-Line double-sided tape, Marvy Uchida – Embossing Heat Tool, MISTI – Most Incredible Stamping Tool, Stickles – Diamond

Image coloured with Copic Markers:

Unicorns:

Tail and Mane: RV14, RV13, BG15, BG13, Y15, Y13, B14, B12, V15, V12

Hooves: C9, C7, C5, C3

Body: C1, C0, C00, Colorless Blender, R02, R00

Eyes: B14, B12, B01

Hope you like it and have a great week!

Entered into: https://gsd-stamps.com/blogs/share-your-designs/play-along-in-our-syd-challenge-may-2023

Snow Kisses!!

Oct18

It’s Wednesday, and this week, I made a snow lady Christmas card using High Hopes Rubber Stamps Snow Kisses – TT059 for the main image and Holly Jolly – K048 for the sentiment. I’ve always loved snow people and birds and this stamp combo makes me smile because it has both.

To make my card this week, I began with a card base of AC Cardstock – White, cut and scored to be 6″ x 6″. I cut 2 strips of Doodlebug Design Inc. – Winter Wonderland coloured snowflake pattern to the size of 6″ x .75″. 2 strips of Doodlebug Design Inc. – Spring Solid Assortment paper to the size of 6″ x .25″ and 1 strip of Forever In Time – Textura Sky cut to the size of 6″ x 4″. With Tim Holtz Distress Ink – Evergreen Bough and a blending brush, I inked around all of the edges of the larger pieces. I ran all of the smaller pieces through my Xyron Create a Sticker. The pieces were then attached to the base card from top to bottom. I used liquid glue to attach the larger piece. I trimmed around the 3 sides of the card with a paper trimmer to make it all even.

For the frame around the image, using my Couture Creations – Go Power and Emboss die cutting machine, I die cut the entire frame with Doodlebug Design Inc. – Winter Wonderland paper and Penny Black – Graceful Stackers dies. 2 dies were pieced together for the pink frame using my cutting device and Forever In Time – Textura Blush cardstock. Lastly, I stamped the image with Memento – Summer Sky ink onto Lawn Fawn – Sparkle Cardstock in “Pixie Dust” using my MISTI. I took this piece and ran it through my Couture Creations – Go Power and Emboss die cutting machine again so that it would fit snug into the frame. I cut off the remainder following the stamped snow along the top and inked it with the Memento – Summer Sky ink. Using liquid glue, I applied the pink frame over top of the snowflake die cut while carefully matching up the edges. Liquid glue was applied to the lower back of the snow piece and it was attached to the snowflake background inside the frame.

The image was stamped onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. After colouring the images, I fussy cut around all of them and then with a black marker, inked around all of the edges. I popped up the snowlady using U-Line double-sided tape and attached her to the card under the snow. The little bird was also popped up using U-Line double-sided tape and some liquid glue. Using Copic B41, I added in some shadows in the snow and Stickles – Hibiscus was applied to the scarf and pompom to give them some extra sparkle.

The sentiment was stamped onto Doodlebug Design Inc. – Spring Solid Assortment using my MISTI and Versamark ink. Ranger Embossing Powder White – Extra Fine Detail was applied and then heat embossed using a Marvy Uchida – Embossing Heat Tool. Using my Cuttlebug and My Creative Time – More Stitched Circles, I die cut the sentiment. The edges were inked around using a finger dauber and Tim Holtz Distress Ink – Evergreen Bough. The snowflake was cut using my Cuttlebug, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” cardstock and die from Recollections – Christmas Snowflakes Clear Stamp & Die set. I popped up both the sentiment and snowflake using U-Line double-sided tape onto the card. Lastly, I added 3 Doodlebug Designs Inc. – Sprinkles onto the frame to finish it off.

Card Recipe:

Stamps: Snow Kisses – TT059 (High Hopes Rubber Stamps)

Sentiment: Holly Jolly – K048 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Versamark, Memento – Summer Sky

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Doodlebug Design Inc. – Winter Wonderland (6″ x 6″), Doodlebug Design Inc. – Spring Solid Assortment (12″ x 12″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Forever In Time – Textura Sky, Forever In Time – Textura Blush

Die Cuts: Penny Black – Graceful Stackers (51-658), My Creative Time – More Stitched Circles MCT-D136, Recollections – Christmas Snowflakes Clear Stamp & Die 529291

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Stickles – Hibiscus, Cuttlebug, Blending Brush, Doodlebug Designs Inc. – Sprinkles, Xyron Create a Sticker, Couture Creations – Go Power and Emboss, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Snow Lady: BV20, C00, Colorless Blender, YR18, YR12, YR07, YR04, R29, R27, R24, Eyes (Sakura Glaze – Black), Stickles – Hibiscus

Mitt’s, Coat and Hat: BG72, BG57, BG32, BG13, BG11

Scarf and Trim: RV69, RV09, RV06, RV04, RV02

Birds and Earmuffs: B97, B95, B93, B91, R46, R14, R08, YR12, YR07, YR04, R85, R83, R81, RV55, RV17, RV14, BV02, BV01, BV00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

You’re O-Fish-Ally Awesome!

Sep13

It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Finnigan – P117 for the image and O-fish-ally – FLL019 for the sentiment. We have a lot of family and friends that love to fish and when I saw this image and sentiment, I could resist pairing them together.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb., cut and scored to be 5.5″ x 4.25″. Stampin’ UP! – Whale of a Time Designer Series Paper was cut to be the same size as the base and applied using double-sided tape. Using paper from the same pack, I fussy cut around the school of fish and applied it to the base card using a mixture of double-sided tape and glue. The excess was then trimmed off on the bottom and left side of the card. Tim Holtz Distress Ink – Evergreen Bough was applied around all of the outer edges of the card using a finger dauber. Using my Anna Griffin Empress Mini Machine and PinkFresh Studio Essentials – Blanket Stitched Circle, I die cut Copic Marker X-Press It Blending Card cardstock. Then, using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the die-cut piece. The sentiment was also stamped using my MISTI onto the same cardstock and then die cut using Gina K Designs – Sentiment Strips. Lastly, I combined the dies from PinkFresh Studio Essentials – Blanket Stitched Circle and Lifestyle Crafts Cutting Dies – Nesting Circles to create a frame using the paper from Stampin’ UP! – Whale of a Time Designer Series Paper and Anna Griffin Empress Mini Machine.

The image was coloured in with Copic markers listed below. I coloured in the fish first, then the water. Some sand was added to the bottom of the bowl using a Ranger – Emboss It Pen Clear and Seth Apter – Dirty Sand Embossing Powder. This was heat set with a Marvy Uchida – Embossing Heat Tool. I wanted the back part of the sand to appear lighter, so I just dabbed the pen in spots to add in the Embossing Powder after I had coloured it. Lastly, I applied Ranger Inkssentials – Glossy Accents to the inside of the bowl and puddles of water. This was set aside to dry.

Once the Glossy Accents was dry the card was ready to assemble.  I applied some glue to the circle frame I had created earlier and applied it over top of the coloured image circle. U-Line double-sided tape was applied to the back of the image and sentiment and they were both popped up onto the background designer papers. I thought these adorable buttons from Buttons Galore & More – Fun in the Sun Collection were perfect for this card. The button backings were removed from the backs of the fish buttons and U-Line double-sided tape was applied to them. I popped up the 3 fish on the card to finish it off.

Card Recipe:

Stamps: Finnigan – P117 (High Hopes Rubber Stamps)

Sentiment: O-fish-ally – FLL019 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough

Die Cuts: PinkFresh Studio Essentials – Blanket Stitched Circle, Gina K Designs – Sentiment Strips, Lifestyle Crafts Cutting Dies – Nesting Circles

Embossing Powder: Seth Apter – Dirty Sand

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Stampin’ UP! – Whale of a Time Designer Series Paper (6″ x 6″)

Embellishments: Buttons Galore & More – Fun in the Sun Collection

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Ranger – Emboss It Pen Clear, Marvy Uchida – Embossing Heat Tool, Ranger Inkssentials – Glossy Accents, Anna Griffin Empress Mini Machine

Image coloured with Copic Markers:

Fish: YR68, YR31, YR18, Y38, R89, R59, R39, R29, R24

Fish Bowl, Water, Sand and Water Droplets: B04, B02, B01, B00, E44, E43, E42, E41, C3, C2, C1, C00, Seth Apter – Dirty Sand

Background: BG72, BG57, BG32, BG11, E37, E35, E33, E31

Hope you like it and have a fantastic week!

Check out more adorable images at High Hopes Rubber Stamps!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

AHH – 60!!

Aug25

Sharing a birthday card I made for a friend using Art Impressions – AHH Set – A4671 and Rock On Laugh Lines – 5422. I was late getting this birthday card out to my friend as usual and this face says it all. LOL!

To make the card, I began with the base of 8.5″ x 7″ Hammermill – Premium Colour cardstock, scored and folded to the size of 8.5″ x 3.5″. Using my MISTI and Memento – Tuxedo Black ink, the images were stamped onto Copic Marker X-Press It Blending Cardstock and coloured in with Copic Markers. Once the images were coloured, I fussy cut around them both. For the blouse, I stamped the image again onto DCWV – Pocket Blossom paper and paper-pierced it onto the image after I had run it through my Xyron Create a Sticker. For the image on the front page, a black marker was used to outline all of the edges.

For the front of the card, I die cut 3 balloons using my Anna Griffin Empress Mini Machine, Concord & 9th – Pop-Up Par-Tay dies and Pergamano Parchment Paper – Rainbow Pastel and 1 balloon out of a spare piece of patterned paper to use for the inside of my card. The numbers were cut from Recollections – Black cardstock using my cutting machine and Lawn Fawn Lawn Cuts – Henry’s 123s. To create the background, I used multiple Tim Holtz Distress inks listed below, multiple brushes and Lawn Fawn – Confetti Stencils to create the background on the base card front.  The sentiment was stamped with a MISTI, Versa Fine – Onyx Black ink and then embossed with Ranger – Clear Super Fine Detail Embossing Powder. Marvy Uchida – Embossing Heat Tool was used to heat the embossing powder. Then, I fussy cut around it.

The front of the card was now ready to assemble. I ran each of the numbers through my Xyron Create a Sticker and the balloons through my Xyron Creative Station. The numbers were then placed onto the balloons. I attached the first 2 balloons to the card and then drew in the strings with a black marker. I then added the last balloon and drew another string. A white pencil was used to create a bit of glow along the left side of the balloons. After attaching U-Line double-sided tape to the back of the sentiment and the image, I popped them up onto the front of the card.

Inside of the card: 

For the inside of the card, I used Rock On Laugh Lines – 5422 – Art Impressions, Dance It Out Set – 5278 – Art Impressions, Be Happy Laugh Lines – 5279 – Art Impressions for the sentiments. I cut out 3 sentiment bubbles using Anna Griffin Empress Mini Machine, Spellbinders – Die D-Lites Conversation Bubble 3 Etched Dies out of white cardstock. I stamped each of sentiments using a MISTI, Versa Fine – Onyx Black ink and then embossed with Ranger – Clear Super Fine Detail Embossing Powder. Marvy Uchida – Embossing Heat Tool was used to heat the embossing powder. I ran each of the sentiment bubbles and my image through my Xyron Creative Station.

The inside of the card was now ready to assemble. I placed the 1 bubble sentiment at the top of the card and then using my image as a guide for placement, I attached the patterned balloon to the card first. The image was attached on top of it and then I added the bottom bubble sentiment. Lastly, I placed the final bubble sentiment to the card in between the other top 2 bubble sentiments to complete the card.

Thankfully, she loved her card and I hope you do too!

Card Recipe:

Stamp and Sentiments: AHH Set – 4671 – Art Impressions, Rock On Laugh Lines – 5422 – Art Impressions, Dance It Out Set – 5278 – Art Impressions, Be Happy Laugh Lines – 5279 – Art Impressions

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Peacock Feathers, Mustard Seed, Wilted Violet and Evergreen Bough, Saltwater Taffy, Mowed Lawn, Spiced Marmalade

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., DCWV – Pocket Blossom – 12″X12″ (30.5cmx30.5cm), Pergamano Parchment Paper – Rainbow Pastel, Recollections – Black cardstock

Die Cuts: Lawn Fawn Lawn Cuts – Henry’s 123s, Concord & 9th – Pop-Up Par-Tay, Spellbinders – Die D-Lites Conversation Bubble 3 Etched Dies

Stencil: Lawn Fawn – Confetti Stencils (6″ x 6″)

Embossing Powder: Ranger – Clear Super Fine Detail

Miscellaneous: Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Anna Griffin Empress Mini Machine, Xyron Create a Sticker, Xyron Creative Station

Image coloured with Copic Markers:

Skin and Lips: E21, E11, E00, E000, R89, R59, R39, R37, R30, R20

Hair: E08, YR18, YR16, YR12, B60, BV20, C1

Clothing – Lady1

Pants: B26, B23, B21

Blouse: Paper Pieced: DCWV – Pocket Blossom – 12″X12″ (30.5cmx30.5cm), YG67, YG61, Colorless Blender

Earings: YG67, YG63, YG61

Shoes: YT9, T7, T5

Clothing – Lady2

PJ’s: BV08, V17, V15, V12, V01

Slippers: V17, V15, V12, R30, R20, B60, BV20, Colorless Blender

Chair: E29, E27, E25, E23

Shadow: C3, C2, C1

Hope you like it and have a great week!

Cat & Mouse Party!!

Jun29

It’s Wednesday, and this week, I made a birthday card using High Hopes Rubber Stamps Cat & Mouse Party – TDG036 for the image and Dot Happy Birthday To You! – F065 for the sentiment. These animals are ready to party, are you?

To make my card this week, I began with a card base of AC Cardstock – White paper cut and scored to be 6″ x 6″. Using my Cuttlebug and My Creative Time -Stitched Squares Inside and Out, I die cut 3 squares out of Doodlebug Design Inc. – Fairy Tales, Recollections – Spring Inks paper and Copic Marker X-Press It Blending Card. I also used Doodlebug Design Inc. – Fairy Tales 6″ x 6″ paper for my main background. I applied this directly to the base card using double-sided tape. Tim Holtz Distress Ink – Evergreen Bough and Tim Holtz Distress Ink – Picked Raspberry were both used to go around the edges of the die-cut paper. I applied U-Line double-sided tape to the backs of the aqua coloured square and patterned paper and popped them both up onto the background.

The image and sentiment were both stamped onto Copic Marker X-Press It Blending Card using my MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. The image was coloured in with Copic Markers. I die cut the sentiment using my Anna Griffin Empress Mini Machine and My Creative Time – Stitched Zig Zag Ties. Copic marker RV06 was used to go around the edges. I attached the coloured image to Recollections – Spring Inks paper using double-sided tape and then cut a slim border around the image. I applied U-Line double-sided tape to the back of this piece and popped it up into the centre of the patterned square. 4 layers of U-Line double-sided tape were attached to the back of the sentiment on the bottom portion and liquid glue was applied to the top. I popped this up onto the card at the bottom. Lastly, to finish the card off, I applied Creative Impressions – Metallic Balloon Brads by adding 2 layers of U-Line double-sided tape. I popped them onto the sentiment and the card and drew in some string for the balloons. Stickles – Star Dust was added to the cake and confetti.

Card Recipe:

Stamps: Cat & Mouse Party – TDG036 (High Hopes Rubber Stamps)

Sentiment: Dot Happy Birthday To You! – F065 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Ink – Picked Raspberry

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Doodlebug Design Inc. – Fairy Tales (6″ x 6″), Recollections – Spring Inks (12″ x 12″)

Die Cuts: My Creative Time -Stitched Squares Inside and Out, My Creative Time – Stitched Zig Zag Ties

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cuttlebug, Anna Griffin Empress Mini Machine, Creative Impressions – Metallic Balloon Brads – Item 90613, Stickles – Star Dust

Image coloured with Copic Markers:

Cat: N9, N7, N6, N5, N4, R46, R30, R20

Mouse: E35, E34, E33, E31, E30, R46, R30, R20, R02, R01, R00

Cake, Hat and Confetti: BG57, BG32, RV06, RV04, RV02, RV00, Y17, Y15, Y11, YR15, YR14, YR12, V04, YG07, YG05, YG03

Balloons: BG72, BG57, BG32, BG11, BG000, YR18, YR16, YR12, YR00

Candles: BG32, R46, YR14, Y08, Y04

Plate: BV25, BV23, BV20, BV0000

Background: Y04, Y02, Y00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

High Tides

May29

Sharing a card I made today using KLM Digital Design –  Beach Gnome from the new May 2022 release. This image also comes with 2 more sentiments, “Life is better at the beach” and “Enjoy the little things”.

I imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers. I created the pattern on his shirt to make it look a little wild. Using scissors, I fussy cut around the coloured image. I also fussy cut around the sentiment, splitting it into 2 parts. I ran them through a Xyron Create a Sticker and adhered them directly to Recollections – Black cardstock. Once again, I fussy cut around the sentiments. I added U-Line double-sided tape to the backs of the sentiment and image and set them aside.

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardsstock. I cut another panel to be the same size as the card base. Using Tim Holtz Distress Ink – Squeezed Lemonade ink, a Picket Fence – Blending Brush and Kraftin’ Kimmie – Sunburst stencil, I created the sunny background. I did this by first laying down the yellow background and then putting the stencil over top to make the sun rays a little brighter. Using Krafty Kolours – Sandy Shores ink, I created the sandy shore. For the waves, I thought the paper from Bo Bunny – Down by the Sea Collection was perfect. Using the coloured image as a guide for placement, I cut along the wavy lines with the piece measuring approximately 1.75″ x 4.25″. Using a finger dauber and Tim Holtz Distress Ink – Evergreen Bough, I inked along the top and bottom of the waves to remove the white. Using Tim Holtz Distress Inks – Tumbled Glass and a Picket Fence – Blending Brush, I added a bit of tint to the patterned paper. Using glue, I attached it to the background panel. I added in a small shadow under the sandals with Copic markers.

The card was now ready to assemble. I attached the panel to the base card using double-sided tape. I removed the tape backing from the image and sentiment and popped them both up onto the card. Using a button shank remover, I removed the backs to the Dress It Up Buttons. I applied some glue to the backs of each of them and placed them onto the card to finish it off.

Card Recipe:

Stamp and Sentiment:  Beach Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Squeezed Lemonade, Krafty Kolours – Sandy Shores, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Bo Bunny – Down by the Sea Collection (6″ x 6″ Paper Pad), Recollections – Black

Stencil: Kraftin’ Kimmie – Sunburst

Embellishments: Dress It Up – Ocean View, Dress It Up – Seashells At The Seashore

Miscellaneous: U-Line – 2 sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Xyron Create a Sticker, Picket Fence – Blending Brushes

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E47, E44, E43, E41

Hat and Sandals: B26, B23, B21

Shirt: Y38, Y35, Y15, YR16, Gelly Roll Sakura #10 Pen

Bathing Suit: BG09, BG05, BG02, BG01

Sunglasses: BG09, BG05, BG00, Gelly Roll Sakura #5 Pen

Shadow Under Sandals: E35, E34, E33

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Beautiful Blessings!!

Mar9

It’s Wednesday, and this week, I made an Easter card using High Hopes Rubber Stamps Easter Gnome – SLF034  for the main image and Beautiful Blessings – FDG030  for the sentiment. I love to colour gnomes and was so excited when I saw this adorable character in the High Hopes Rubber Stamps new “This and That” Spring Release.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I cut Forever In Time – Viola cardstock to be the same size as the base card and attached it using double-sided tape. Echo Park – Welcome Easter cardstock and Forever In Time – Sky cardstock were die cut using My Creative Time – Rectangle Frame Layers and my Cuttlebug. I trimmed the Forever In Time – Sky cardstock to 2″. Both pieces were inked with Tim Holtz Distress Ink – Evergreen Bough around all edges. I applied the smaller piece to the centre of the egg background and then applied U-Line Double-sided tape and popped it up onto the base background.

Using PinkFresh Studio – Essentials: Folk Edge Squares, I die cut Copic Marker X-Press It Blending Card cardstock. The image was then stamped onto it with my MISTI and Memento – Tuxedo Black ink. I stamped the sentiment onto Copic Marker X-Press It Blending Card cardstock and die cut it with My Creative Time – Bunch of Fun Circle Dies. The image and frame around it were coloured in with Copic Markers.

The remainder of the card was now ready to finish being assembled. I applied U-Line double-sided tape to the back of the image and sentiment and popped them up onto the egg background. Lastly, I added in a few YNS Gumdrops to complete the card.

Card Recipe:

Stamps: Easter Gnome- SLF034 (High Hopes Rubber Stamps)

Sentiment: Beautiful Blessings – FDG030 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Echo Park – Welcome Easter (6″ x 6″), Forever In Time – Sky, Forever In Time – Viola

Die Cuts: My Creative Time – Rectangle Frame Layers, My Creative Time – Rectangle Frame Dies, My Creative Time – Bunch of Fun Circle Dies, PinkFresh Studio – Essentials: Folk Edge Squares

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cuttlebug, YNS GumDrops

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: C5, C4, C3, C1, C0

Hat and Clothing: BG34, BG32, BG15, BG11, BG10, V15, V12, V01, V000

Boots: E33, E31, E30, E27, E25, E23, E21

Bunny and Bunny Ears: C3, C1, C0, RV11, R20

Carrot and Stem: E08, YR18, YR14, YR12, Y08, G14, G07, YG23, YG11, YG03

Grass: YG17, YG13, YG03

Background: Y00, G00, B000

Border around Square Frame Circle: V12

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

You Go First!!

Mar6

Sharing a birthday card I made using Art Impressions Never Too Old – 5114  for the main image and sentiment. My friend and I tease each other about getting older. So, I thought this would be a fun card to make for her. LOL! I used another sentiment from this same set on the inside too, which reads, “Thanks for always being older than me”.

To make my card, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. For the background, I used multiple inks from Tim Holtz listed below, Picket Fence Studio Blender Brushes and Lawn Fawn – Confetti Stencils. Using my MISTI, Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card cardstock. The image was coloured in and fussy cut. Using my MISTI and Versa Fine – Onyx Black ink, I stamped the image onto Hammermill – Premium Colour 100 lb. cardstock. It was then embossed using my Marvy Uchida – Embossing Heat Tool and Ranger – Clear Super Fine Detail embossing powder. Spellbinders Die D-Lites – Conversation Bubble Three (S2-137) and my Cuttlebug were used to die cut the sentiment. U-Line double-sided tape was added to the backs of the sentiment and coloured image and they were both popped up onto the background to complete the front of the card. I repeated the process of inking and embossing for the inside sentiment to complete the card.

Card Recipe:

Stamp and Sentiment: Never Too Old – 5114 (Art Impressions)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Salty Ocean, Shaded Lilac, Mustard Seed, Wilted Violet and Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Dies: Spellbinders Die D-Lites – Conversation Bubble Three (S2-137)

Stencil: Lawn Fawn – Confetti Stencils (6″ x 6″)

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cuttlebug, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #8 Pen, Picket Fence Studio Blender Brushes

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R46, R30, R20

Hair: N4, N3, N2, N0

Clothing, Purse, Shoes, Hat and Balloon: B69, V17, V15, V12, V09, V06, V05, V04, V01, E13, Y17, Y15, Y13, C2, C1, C00

Shadow: C3, C2, C1, C00

Hope you like it and have a great week!

Baby Gnome!!

Jan24

Sharing a card I made today using KLM Digital Design –  Baby Gnome from the new January 2022 release. Congrats to all of the families who received a new blessing into their lives this January and also to all of those future parents-to-be this year too!

I created the base using Hammermill – Premium Colour 100 lb. cardstock. I cut the paper to the size of 5.5″ x 4.25″. For the background, I used the same paper for the front and back. I first cut the Echo Park – Hello Baby – It’s a Girl cardstock to be the same size as the base card. Using my Cuttlebug and Art Impressions – Oval Double Stitched Dies, I cut an oval from the floral patterned side. I inked around the edges of the floral oval with Tim Holtz Distress Ink – Seedless Preserves and for the edges of the oval on the larger piece with the baskets showing, I applied Tim Holtz Distress Ink – Evergreen Bough. I taped the 2 pieces back to together using some Scotch Tape and then using double-sided tape, I applied the full background piece to the base card. I inked around the entire outer edges with the Tim Holtz Distress Ink – Seedless Preserves.

I imported the image into Microsoft Word and printed it out onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then fussy cut with scissors. U-Line double sided tape was applied to the back of the image and it was popped up onto the card in the centre of the Oval. The sentiments were also brought into Microsoft Word and combined together. I created a rectangular shape and put it behind the type. I added an Aqua colour to fill in the background and then gave it a 4 pt border. Once it was printed out, I just cut around the edges of the rectangle with my cutter and then applied Tim Holtz Distress Ink – Evergreen Bough around the frame. I added some U-Line double sided tape and popped it up onto the bottom of the card. To finish everything off, I added in a few CC Designs – Dragon Dreams Enamel Dots.

Card Recipe:

Stamp and Sentiments: Baby Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Ink – Seedless Preserves

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Echo Park – Hello Baby – It’s a Girl (6″x6″)

Die Cuts: Art Impressions – Oval Double Stitched Dies (5065)

Miscellaneous: U-Line – 2 sided tape, Cuttlebug, CC Designs – Dragon Dreams Enamel Dots

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hat: V15, V12, V01, V000

Blanket and Bow: BG15, BG13, BG11, BG10

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Beautiful Day!!

Jan18

It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Winter Kitty – SDG006  for the main image and Beautiful Day – FDG013 for the sentiment. We just had a major snowfall over the last few days and this little kitty is all bundled up and ready to play!

Growing up we had a lot of snow during the winter and couldn’t wait to put on our mitts and snow boots and go out to play. We had huge snow banks in the schoolyard across the street and would toboggan down them or just slide down in our snow suits! LOL! It was sooooo much fun! Sometimes we even made big snow forts in the backyard with tables and chairs made out of ice and snow. We hardly spent anytime indoors and didn’t usually go back into the house until we had to or we were turning blue because it was so cold out, but even then we still wanted to continue playing outdoors. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I used Scrapbook.com – Rainbow Smooth Cardstock for the main background paper. It was already the same size as the base, so no cutting had to be done. To get more use out of the same paper, I had cut the oval frame using my Cuttlebug and Hero Arts – Infinity Die Ovals first. Then, I placed the Rainbow cardstock onto the card base using double-sized tape. I die cut the square background using My Creative Time -Stitched Squares Inside and Out and Pebbles – Winter Wonderland paper and the rectangle to the size of 4″ x 4″. The rectangle was cut from from the same paper pack to the size of 1.25″ x 4″. I inked around the edges of both shapes with a sponge dauber and Tim Holtz Distress Ink – Evergreen Bough. Using double-sided tape, I placed both shapes over the pink background and hid where I cut the oval with the square. I cut out a smaller oval using the same Hero Arts – Infinity Die Ovals and Copic Marker X-Press It Blending Card. I also cut out a 1.5″ circle using a circle punch. Lastly, I die cut the scalloped circle using WeR Memory Keepers – Quickutz Nesting Scallops dies and Hot Buy Craft Smart – Holiday Glitz Glitter Paper.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock oval and the sentiment onto the circle. I coloured in the image with Copic markers and then added some Ranger – Emboss It Pen Clear to the bottom of the oval and applied WOW! Sparkling Snow Embossing Glitter. I heat embossed this and added more embossing powder several times to create a thicker layer with my Marvy Uchida – Embossing Heat Tool. Then I added some Cosmic Shimmer Fluffy Stuff and heat embossed it as well to puff it up. Gelly Roll Sakura #10 Pen was used to create the snow in the sky. Sakura Glaze – Black and Gelly Roll Sakura #5 Pen were used on the eyes and nose of the cat.

I inked around the edges of the large pink oval and the circle with Tim Holtz Distress Ink – Picked Raspberry. I applied the coloured image directly to the pink oval and the sentiment circle to the scalloped circle using some liquid glue. Both shapes were then popped up onto the card using U-Line double-sided tape. To completed the card and add in some extra sparkle, I applied some YNS Gumdrops – Winter Wonderland to the background patterned paper.

Card Recipe:

Stamp: Winter Kitty – SDG006 (High Hopes Rubber Stamps)

Sentiment: Beautiful Day – FDG013 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Ink – Picked Raspberry, Ranger – Emboss It Pen Clear

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Scrapbook.com – Rainbow Smooth Cardstock (4.25″ x 5.5″), Pebbles Winter Wonderland 6″ x 6″, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Hero Arts – Infinity Die Ovals, WeR Memory Keepers – Quickutz Nesting Scallops, 1.5″ Circle Punch

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Cuttlebug, YNS Gumdrops – Winter Wonderland

Image coloured with Copic Markers:

Kitty: N7, N5, N3, R02, R00, RV66, RV63, RV55 (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Sky: B05, B04, B02, Gelly Roll Sakura #10 Pen

Snow: WOW! Sparkling Snow Embossing Glitter, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Surprise Gnome!!

Dec19

Sharing a birthday card I made today using KLM Digital Design –  Surprise Gnome from the new December release. This image also comes with 2 more sentiments, “Let’s Celebrate!” and “Let’s party”.

I created the base using Hammermill – Premium Colour 100 lb. cardstock. I cut the paper and folded it to the size of 5.5″ x 4.25″. I cut the background paper to be the same size as the background using Echo Park – It’s Your Birthday paper and glued it to the front of the base card. Tim Holtz Distress Ink – Evergreen Bough was used to ink around the edges. I imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers. Using scissors, I fussy cut around the coloured image and sentiment. I ran the sentiment through my Xyron Create a Sticker.  I attached this to some Aqua cardstock and fussy cut around it again. U-Line double sided tape was applied to the backs of the image and the sentiment and they were popped up onto the card. I tied some black thread to some balloon brads and then popped them up onto the card using double-sided tape.

Card Recipe:

Stamp and Sentiment:  Surprise Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Echo Park – It’s Your Birthday (6″x6″ Double-Sided)

Miscellaneous: U-Line – 2 sided tape, Xyron Create a Sticker

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E47, E44, E43, E41

Hat and Cake Icing: BG72, BG57, BG32, BG11

Shirt: V25, V17, BV01

Pants: B26, B23, B21

Cake: E27, E25, E23

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Ugly Sweaters!!!

Nov23

It’s Wednesday, and this week, I made a Christmas card using Ugly Sweater Time – SLF025 by High Hopes Rubber Stamps for the main image and Ugly Sweater Time – FFL025 (High Hopes Rubber Stamps) for the sentiment. I have a few ugly Christmas sweaters, that I love wearing at Christmas time. How many do you have? LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I cut the main background paper from Hot Buy – Recollections – Jewel Tones to be the same size and applied this directly to the base card using double-sided tape. Your Next Stamp – Winter Knits patterns were cut to the size of a little over .5″ each x 4.25″ and applied to the top and bottom of the card using double-sided tape. My Cuttlebug and My Creative Time -Stitched Squares Inside and Out were used to die cut PhotoPlay – Tulla & Norbert’s Christmas Party paper to the size of 4″ x 4″. Tim Holtz Distress Ink – Evergreen Bough was applied around the edges and double-sided tape was used to adhere it to the base card. The large oval was die cut using my Cuttlebug, Hero Arts – Infinity Die Ovals and Hot Buy – Recollections – Jewel Tones paper. This was popped up onto the square using U-Line double-sided tape.

With my MISTI and Memento – Tuxedo Black ink, I stamped both the image and the sentiment onto Copic Marker X-Press It Blending Card. The image was die-cut using my Cuttlebug and Hero Arts – Infinity Die Ovals. I coloured the image in with Copic markers. The sentiment was die cut with Whimsy Stamps – Quick Strips Die Set and Tim Holtz Distress Ink – Evergreen Bough was used to ink around the edges. The coloured image and sentiment were both popped up onto the card using U-Line double-sided tape to finish it off.

Card Recipe:

Stamp: Ugly Sweater Time – SLF025 (High Hopes Rubber Stamps)

Sentiment: Ugly Sweater Time – FFL025 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., PhotoPlay – Tulla & Norbert’s Christmas Party (6″ x 6″), Your Next Stamp – Winter Knits (6″ x 6″), Hot Buy – Recollections – Jewel Tones

Die Cut: Hero Arts – Infinity Die Ovals, My Creative Time -Stitched Squares Inside and Out, Whimsy Stamps – Quick Strips Die Set – WSD330

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beard: B60, C1, C0, C00

Hat and Clothing: BG72, BG57, BG32, BG11, Y17, Y15, Y13, R59, R37, R35

Shoes: C8, C6, C4, C2, C1, C0

Sweater: E53, E51, E50, E35, E34, E33, E31, G07, G05, G03, Y17, Y15, Y13, R59, R37, R35, R02, YG03, B16, B14, B12

Knitting Needles: YG03, G07

Shadow: N2, N1, N0, BG000

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Dropping A Line!!!

Nov2

It’s Wednesday, and this week, I made a birthday card using Just Fishin’ – TLF029 by High Hopes Rubber Stamps for the main image and Dropping A Line – FFL013 (High Hopes Rubber Stamps) for the sentiment. High Hopes just released November “Gnome Mania”. There are so many new super adorable gnomes to choose from.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I cut the background paper from Rust coloured cardstock to be the same size and applied this directly to the base card using double-sided tape. Using my Cuttlebug and My Creative Time – Rectangle Frame Layers, I die cut the patterned paper from Photo-Play – Camp Happy Bear. Tim Holtz Distress Ink – Evergreen Bough was used to ink around the edges. I added some thin double-sided U-line tape to this piece and popped it up onto the background. With my MISTI and Memento – Tuxedo Black ink, I stamped both the image and the sentiment onto Copic Marker X-Press It Blending Card. Craftin Desert Diva’s – Inside Scalloped Squares dies were used to die cut the Rust coloured paper and Copic Marker X-Press It Blending Card. I cut a 3.75″ square out of Hammermill – Premium Colour 100 lb. cardstock and used this to piece the 2 die-cuts together after I finished colouring in the image with Copic Markers. This made the 2 pieces more sturdy for adding double-sided tape to pop it up onto the printed background. I die-cut the sentiment using My Creative Time – Curly Frames and then ran it through my Xyron Create a Sticker so that it would lay nice and flat onto the Rust coloured cardstock. I didn’t have a larger border frame, so I used my Brother Scan and Cut to create a border around the die cut. Lastly, to finish off the card, I popped this up using U-Line double-sided tape.

Card Recipe:

Stamp: Just Fishin’ – TLF029 (High Hopes Rubber Stamps)

Sentiment: Dropping A Line – FFL013 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black. Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Photo-Play – Camp Happy Bear (6″ x 6″), Rust Cardstock

Die Cuts: Craftin Desert Diva’s – Inside Scalloped Squares (Retired), My Creative Time – Rectangle Frame Layers, My Creative Time – Curly Frames

Tools: MISTI – Most Incredible Stamping Tool, U-Line – 2 sided tape, Brother Scan and Cut, Xyron Create a Sticker

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20

Beard: E47, E44, E43, E41

Hat and Shirt: E89, E87, E84, E25, E23, E21

Jeans: B26, B23, B21

Tree Stump: E49, E35, E33, E25, E23

Cattail and Grass: E49, E25, E31, YG17, YG13, YG11, YG03, YG01

Fishing Rod and Reel: E25, E23, G05, G02, C3

Fish: E97, E94, E19, E17

Stones: T6, T4, T1

Water and Droplets: BG05, BG02, BG000, B05, B01

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Masked Gnome Thank-you!!

Jul27

Sharing a card I made today using KLM Digital Designs – Mask Gnome from the July release. This image comes with 3 sentiments. I’ve used 1 on my card, but you also have the choice of  “Hang In There!” and “Funny You Should Mask!”. This would be a perfect card to give to any of your friends, family or any of the professionals out there who risk their lives for us everyday.

To make the card, I first imported the image into Microsoft Word and printed it out onto Copic Marker X-Press It Blending Card. I die cut it to the size of 5.25″ x 4.25″ using my Cuttlebug and My Creative Time – Rectangle Frame Layers dies. The edges were then inked with Tim Holtz Distress Ink – Evergreen Bough. The image was coloured in with Copic markers and applied directly to the card base of 5.5″ x 4.25″ Craft Smart cardstock using double-sided tape. To complete my card, I added some Kraftin’ Kimmie – Dazzling Dots.

Card Recipe:

Stamp and sentiment: Mask Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Craft Smart – Card and Envelopes (5.5″ x 4.25″)

Die Cut: My Creative Time – Rectangle Frame Layers

Miscellaneous: Kraftin’ Kimmie – Dazzling Dots

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Beard: E47, E44, E43, E40

Hat and Shirt: BG72, BG57, BG32, BG11

Pants: B26, B23, B21

Boots: E27, E25, E23, E21

Belt: E100, C9, C7, C5, E15, Y38, Y17, Y08

Mask: C9, C7, C5

Shadow: C2, C1, C0, C00, Colorless Blender

You Still have time for the Christmas in July Sale.

35% off Everything.

Coupon Code: CMASJULY21
Expires: 08/01/21

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Sending Big Hugs!!

Jul18

Today, I’m sharing a card using this super adorable image from Dreamerland Crafts stamps called My True Love – D18018. Great big in person hugs or even virtual hugs are always nice to give to give to someone or something that you love.

Here is a close-up of the featured image.

 

To make this card I used a base card of 8-7/8″ x 3-7/8″ using Aqua cardstock. I die cut Crafts – Foil Designer Paper – 02-3080678 using my Couture Creations – Go Power and Emboss and PinkFresh Studio Essentials – Slim Stitched Rectangle Die Set. Using Tim Holtz Distress Ink – Evergreen Bough, I inked all around the edges of the card and die cut. Then I inked the front of the die cut with Tim Holtz Distress Inks: Tumbled Glass, Evergreen Bough, Peacock Feathers, and Speckled Egg using Picket Fence Studio Blender Brushes. Tim Holtz Distress Ink – Rustic Wilderness was applied last at the bottom of the panel to represent grass. I applied 3M VHB – 2 sided tape to the back of the die cut and added it to the base card.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto Copic Marker X-Press It Blending Card and coloured it in with Copic markers. The coloured image was fussy cut out and a black marker was used to go around all of the edges. This was then applied directly to the patterned paper using 3M VHB – 2 sided tape.

To create the “Sending Big Hugs” sentiment, I first took an 8.5″ x 11″ piece of black cardstock and cut it at the 4.25″ mark. Then I ran both pieces through my Xyron Create a Sticker. I find this makes it much simpler than trying to add glue to each piece. Once this was done, using my Cuttlebug, I die cut the black cardstock using Lawn Fawn – “Sending Big Hugs” die 6 times. Then I did it 1 more time using Forever In Time – Glam Glitter Cardstock – Ombre Pastel after I had run it through my Xyron Create a Sticker. I cut around the word “Big” to make it stand out.

I peeled off the sticker from the back of each of them and applied each layer on top of each other to create an embossed image. Then I added the sparkly “Big” as a last layer. I applied this to the patterned paper at the top of the card. Lastly, If felt something was missing, so I added some Stickles – Aqua all around the edges of the large rectangle die cut.

Card Recipe:

Stamp: My True Love – D18018 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Inks – Peacock Feathers, Tim Holtz Distress Ink – Rustic Wilderness, Tim Holtz – Speckled Egg

Paper: Copic Marker X-Press It Blending Card, Crafts – Foil Designer Paper – 02-3080678 (12″ x 12″), Aqua – Cardstock, Forever In Time – Glam Glitter Cardstock – Ombre Pastel

Die Cuts: PinkFresh Studio Essentials – Slim Stitched Rectangle, Lawn Fawn – Giant Sending Big Hugs

Stickles: Aqua

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Picket Fence Studio Blender Brushes, Xyron Create a Sticker, Couture Creations – Go Power, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E15, Y38, Y21, YR23

Dress: BG72, BG57, BG32, BG11

Bears:  E57, E53, E51, E50, E33, E31, E30, E27, E25, E23, E21

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Surfin’ Dudley!

Jun16

It’s Wednesday, and this week, I used High Hopes Stamps’ image Surf Scene Dudley – S244. I’ve seen surfers in action while travelling the world, but have never gone on one myself. Who knows, maybe someday???? Dudley, sure looks happy sporting his vacation pose. LOL!

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers and used Copic – Opaque White to create the splash on the waves. My Creative Time – Rectangle Frame Dies and My Creative Time – Rectangle Frame Layers were both used to die cut the coloured image and background papers. The edges were inked around with Tim Holtz Distress Ink – Evergreen Bough. The image was then attached to the Aqua background using double-sided tape.

To assemble the card, I began with a base card of Hot Buy – Cards and Envelopes (5.5″ x 4.25″). I popped up the 2 backgrounds with 3M VHB – 2 sided tape and attached them both to the base card. Lastly, I added some pop-dots from CC Designs – Dragon Dreams Enamel to finish it off.

Card Recipe:

Stamp: Surf Scene Dudley – S244 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, DCWV – Coastal – 12″ x 12″, Hot Buy – Recollections – Jewel Tones, Hot Buy – Cards and Envelopes (5.5″ x 4.25″)

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, CC Designs – Dragon Dreams Enamel Dots

Images coloured with Copic Markers:

Dragon: G94, G82, G46, YG07, YG03, YG00, BV04, BV02, BV01 (Eyes – Sakura Glaze – Black)

Bathing Suit: YR18, YR16, Y08

Surf Board: BG72, BG57, BG32, BG11, YR16, YR14, Y08, Y04

Water: BG70, BG32, BG11, B93, B91, B52, B41, B06, B04, B02, B01, (Copic – Opaque White)

Sky: B02, B01, B00, B000

Sand: E37, E35, E33, E31

Clouds: BG70, C1, C00, Colorless Blender

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Life Without Dogs???

May5

It’s Wednesday, and this week, I made a slim-line card using Teacup Pup – SS035 by High Hopes Rubber Stamps for the main image and Life Without Dogs – GG029 (High Hopes Rubber Stamps) for the sentiment. Growing up, we always had dogs for pets. We would often take them on nice long walks and they always brightened our day with their tails wagging or playing and making us laugh.

To make my card this week, using Gina Marie Designs – Ric Rac Nested Circle die cuts, I cut out Copic Marker X-Press It Blending Card and stamped my image using my MISTI and Memento – Tuxedo Black ink. I coloured in the image and background using Copic markers and also created the flower pattern on the tea cup.

For the sentiment, Gina Marie Designs – Big and Little Pierced Chain Round dies were used to die cut the rectangle for the sentiment. I stamped the sentiment using my MISTI and Memento – Tuxedo Black ink. Copic R89 was used to create a border around the die cut. I had some tiny pieces from the paw print frame left over so I ran them through my Xyron Create a Sticker and attached them to the sentiment.

To assemble the card, I first took some light tan brown cardstock and cut it to 7″ x 7.25″. Then I scored it at 3.5″ for a finished card base of 3.5″ x 7.25″. Using dark brown cardstock, My Creative Time – Tall Paw Frame Dies were used to create the main frame. I glued this directly to the base card. My Creative Time – Tall Frame Dies were used to die cut the patterned paper from Echo Park Paper Co. – Imagine That!. Tim Holtz Distress Ink – Evergreen Bough was used to ink around the edges. This too, was also glued directly onto the paw frame. 3M VHB – 2 sided tape was used to attach both the completed image and the sentiment to the card. To finish it off, I applied some Crafts Scrapbooking Pearls – 02-3006207.

Card Recipe:

Stamp: Teacup Pup – SS035 (High Hopes Rubber Stamps)

Sentiment: Life Without Dogs – GG029 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Echo Park Paper Co. – Imagine That 6″ x 6″, Light Brown Cardstock and Dark Brown Cardstock

Die Cuts: Gina Marie Designs – Ric Rac Nested Circle, Gina Marie Designs- Big and Little Pierced Chain Round, My Creative Time – Tall Frame Dies, My Creative Time – Tall Paw Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Puppy: E59, E57, E55, B60, C1, C00, Colorless Blender, (Eyes and Nose – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Flowers and Leaves: R89, R85, YG09, YG06, Gelly Roll Sakura #8 Pen

Tea Cup and Saucer: R89, R85, R83

Bone: E53, E51, E50

Shadow: BG72, BG57, BG32, BG13

Check out some other fun new stamps from High Hopes Rubber Stamps
Furry and Friends Release

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Easter Gnome!!

Mar29

Sharing a card I made today using KLM Digital Designs – Easter Delivery Gnome from the new March release. This Easter gnome is collecting coloured eggs for the Easter Bunny to hand out to all of the little children. This stamp comes with 2 more sentiments as well as the one shown here on my card. “Easter Blessings” and “some bunny loves you”.

To make the card, I first imported the image and sentiment into Microsoft Word. I sized both the image and sentiment to fit 5.5″ x 4.25″ and printed everything out onto Copic Marker X-Press It Blending Card using my HP Printer. I used my Brother Scan and Cut to cut around the image and my cutter to cut around the sentiment and scissors to round the corners. The image and sentiment were coloured in with Copic markers.

For the base card, Hammermill – Premium Colour 100 lb. paper was used at the size of 5.5″ x 4.25″. I die cut the base to be same size using Your Next Stamp – Happy Spring paper and used double-sided tape to attach it directly to the base card. Tim Holtz Distress Ink – Evergreen Bough was used to ink around the edges. Hot Buy – Recollections – Jewel Tones was cut to 5.5″ x 3″ and glued on top of the patterned paper. Lastly, I had some watercolour paper that I had created a pattern on using some inks, a roller and Gel plate from a class a few years back. I though it went great with the colour scheme and almost look like a wood pattern. This was cut to 5.5″ x 2.5″ and glued on top of the Purple paper. To complete the card, I attached both the sentiment and image using 3M VHB – 2 sided tape and added a few Your Next Stamp Gumdrops.

Card Recipe:

Stamp and Sentiments: Easter Delivery Gnome (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hot Buy – Recollections – Jewel Tones, Your Next Stamp – Happy Spring (6″x6″)

Miscellaneous: Your Next Stamp Gumdrops, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E49, E47, E44, E42

Shirt: V17, V15, V12

Pants: B26, B23, B21

Hat: BG72, BG57, BG32, BG11

Bunny Ears: R30, R20, BV20, C1, C0

Boots: E57, E55, E47, E44, E33, E30, E27, E25, E23

Large stick: E59, E57, E55, E53

Nest: E53, E23, Y19, YR31, YR21

Eggs: BG72, BG57, BG32, BG11, Y08, Y04, Y00, RV06, RV04, RV02

Pot: E99, E97, E08

Sentiment: Y08, Y04, Y02, V17, V15, V12

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

When You Love Someone!

Feb9

Today, I’m sharing a Valentine’s card that I made using Dreamerland Crafts stamps called When You Love Someone – D20005. I just love this adorable couple. This image could also be used for an Anniversary card too!

To make this card I used a base card of 6″ x 6″ using AC White cardstock. I added the base background using the paper from Stampin’ Up! – Have a Cuppa with double-sided tape. Then, I die-cut 4 hearts using my Cuttlebug and Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted. Tim Holtz Distress Ink – Worn Lipstick and Tim Holtz Distress Ink – Evergreen Bough were used to colour around the edges of the card and also all of the hearts.

I stamped the image using Memento – Tuxedo Black ink and my MISTI onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers. Then I used my Brother Scan and Cut to cut around the image. I stamped the sentiment using Versa Fine – Onyx Black ink and my MISTI. I used Ranger – Clear Super Fine Detail embossing powder and then heat embossed the powder with Marvy Uchida – Embossing Heat Tool onto the smallest heart.

To assemble the card, the largest heart was attached directly to the base background using glue. I added 3M VHB – 2 sided tape to the backs of the remaining hearts and coloured image and then layered them on top of each other. To complete the card, I added in some hearts from Jot – Jewel Stickers.

Card Recipe:

Stamp and Sentiment:  When You Love Someone – D20005 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Worn Lipstick, Tim Holtz Distress Ink – Evergreen Bough

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Stampin’ Up! – Have a Cuppa – 6″ x 6″, AC White cardstock, Hot Pink cardstock

Die Cuts: Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape, Jot – Jewel Stickers

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair:  E47, E44, E43, E15, Y38, Y21, YR23

Dress, Bow and Shoes: BG72, BG57, BG32, BG11

Shirt and Vest: G82, G46, G43, G40, E29, E27, E25, E23

Boots: E57, E55, E53, E51

Heart: BG57, BG45, BG34, R85, R83, R81, C3, C2, C1

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

HoHoHoHoHo!!

Nov20

Today I’m sharing  Santa Gnome (KLM Digital Designs) image from the new November release. This adorable little Gnome comes with 3 different sentiments. “Believe In The Magic”, “Happy Holidays” and “Christmas Blessing”.

I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. I used my Brother Scan and Cut to cut around the image and coloured it in with Copic markers. The background was die cut using Hot Buy Craft Smart – Holiday Glitz Glitter Paper and Hammermill – Premium Colour 100 lb. paper. I coloured the vines and leaves from the Hammermill die cut with various Tim Holtz Distress inks listed below and then fussy cut them out. Glue was applied to the reverse side of the die cut and then it was placed on top of the original Glitz Paper die cut. Crafts – Self-Adhesive Rhinestones were then applied to the berries on the vine.

For the background, I used the Hammermill paper to create a card base of 5.5″ x 4.25″. Then I applied Crafts – Sparkling Stickers red paper to the base. I then adhered the vine and frame directly to the background using glue. Lastly, I die cut the sentiment 5 times using black cardstock and the 1 time with Tonic Studios – Craft Perfect – Onyx Black Pearlescent. I ran all off the die cuts through my Xyron Create a Sticker to make it easier to apply them on top of each other. This created an embossed effect. I then added this on top of the vine base. The main image was then added to the card using 3M VHB – 2 sided tape.

To finish off the card, I added some Marvy – Liquid Applique to the big pom-pom and heat set it with my Marvy Uchida – Embossing Heat Tool to puff it up. Lastly, some Stickles – Frosted Lace was added to the hat, cuffs and coat trim.

Card Recipe:

Stamp: Santa Gnome (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Pine Needles

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Tonic Studios – Craft Perfect – Onyx Black Pearlescent, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Crafts – Sparkling Stickers – 02-3068629

Die Cut: Poppystamps – Holly Vine Sidekick Frame – Christmas Craft Die

Tools: 3M VHB – 2 sided tape, Stickles – Frosted Lace, Marvy – Liquid Applique, Crafts – Self-Adhesive Rhinestones – 02-3006207, Xyron Create a Sticker, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W3, W2, W1, W0, W00

Hat and Coat: E59, E39, E37, E35, Stickles – Frosted Lace, Marvy – Liquid Applique

Mitts: YG67, YG63, G28

Holly Leaves and Stems: Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Pine Needles, Atayou Spica – Twinkling Like The Stars – Melon – 06, Atayou Spica – Twinkling Like The Stars – Mint – 17, Atayou Spica – Twinkling Like The Stars – Olive – 07

Hope you like it and have a great week!

Check out KLM Designs for some great savings this month.

Wrap up your holiday cards! Offer good until 11/27/20
25% OFF ALL DIGITAL STAMPS
USE COUPON CODE: PRETURKERY

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.