Archive | September 2020

Gnome – Merry Christmas!


It’s Wednesday, and this week I’m featuring a Christmas card I made using the image Flying Gnome – TLF008 and sentiment Sm Christmas Script – F051 from (High Hopes Rubber Stamps).  I just love colouring these adorable little gnomes. Also, it’s always good to make Christmas cards a little at a time throughout the year so that you are not rushing to get them all done in December. LOL! Have you started making your Christmas cards yet this year?

To create the card this week, I first used the die cut from Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background – CED3049 to cut some Copic Marker X-Press It Blending Card using my Cuttlebug. I stamped the main image and then coloured it with Copic Markers. I started off doing the sky first as I didn’t want any of the Reds smearing into it. (This happens sometimes if you are not careful.) Once the image was all coloured in, I used Sakura Glaze – Black and Gelly Roll Sakura #8 Pen to increase the intensity of the eye on the bird. I outlined the entire image with Pigma Micron 03 black marker to make it stand out more against the sky. Lastly, I used a mixture of Gelly Roll Sakura #8 Pen and Gelly Roll Sakura #10 Pen to create the snow and stars in the sky.

For the base of the card, I began with a standard white card base of 4.25″ x 5.5″. I cut another piece of white cardstock the same size and applied the red shimmer topping on it using Crafts – Sparkling Stickers – 02-3068629. I used the same die cut listed above to cut out the intricate design using my Cuttlebug and the gold paper from Hot Buy Craft Smart – Holiday Glitz Glitter Paper. I had put the gold paper through my Xyron Creative Station before I die cut it. This made it easier to just peel and stick onto the base.

For the sentiment, I die cut some spare red cardstock using Craftin Desert Diva’s – Flag Banner Dies. Using my MISTI and VersaMark ink, I stamped the sentiment onto the die cut and embossed it using Ranger Super Fine Gold Embossing powder. This was heated with my Marvy Uchida – Embossing Heat Tool. The image and the sentiment were both popped up with 3M VHB – 2 sided tape to complete the card.

Card Recipe:

Stamp: Flying Gnome – TLF008 (High Hopes Rubber Stamps)

Sentiment: Sm Christmas Script – F051 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Crafts – Sparkling Stickers – 02-3068629

Die Cut: Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background – CED3049, Craftin Desert Diva’s – Flag Banner Dies (Retired)

Embossing Powder: Ranger Super Fine Gold

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, Pigma Micron 03 black marker, Xyron Creative Station, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: W5, W4, W3, W2, W1, W0, W00

Hat and Outfit: R59, R39, R37, R35, YG97, YG95, YG93, G43

Cardinal Bird: R37, R35, R24, R22, R17, R14, R08, R05, R02, R000, YR15, YR12, C3, N10, N8, Gelly Roll Sakura #8 Pen, Sakura Glaze – Black

Leaves and Holly: R59, R37, R24, YG97, YG95, YG93, YG05, G43

Shoe: E34, E33, E31

Sky: B99, B97, B95, B93, Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #10 Pen

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Basketball Birthday!!


Today I’m sharing  Basketball Player (KLM Digital Designs) image from the September release. When creating this card, I thought of my younger brother who used to eat, sleep and dream about basketball all the time when he was young. You barely ever saw him without a basketball in his hand. He was always on the basketball court, shooting hoops or playing games. He actually excelled in a lot of sports and won the trophy for all around athlete in High School. Of course, that was many, many, many years ago. LOL!

I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. The image was then die cut with my Cuttlebug and My Creative Time – Rectangle Frame Dies Layers and then coloured in with Copic markers.  For the sentiment, I brought the original digital image into Microsoft Word and then used the developer tools to crop it so that it went into 3 lines to fit my image better. Then I printed it out and fussy cut around it. The sentiment was then layered onto some chocolate brown cardstock and fussy cut again.

For the basketball background paper, I downloaded from the site listed below and then printed it out on my printer. I die cut it with My Creative Time – Rectangle Frame Dies then glued directly onto the The Paper Studio – Primary Base Colours 5.5″ x 4.25″ cardstock base. The main image was adhered directly to the chocolate brown cardstock. I added a small basketball brad and then popped up the entire image onto the background using 3M VHB – 2 sided tape. The sentiment was also popped up.

Card Recipe:

Stamp and Sentiment: Basketball Player (KLM Digital Designs)

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, http://www.printablepapertreats.com/slam-dunk-silhouette-digital-papers, The Paper Studio – Primary Base Colours

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers

Tools: 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E47, E44, E43

Clothing and Shoes: E29, E27, E25, E23, E15, YR24, Y35, Y115

Basketball: E08, YR18, YR16, YR12

Shadow: W5, W3, W1

Background around boy: Y04, Y02, Y00, Y000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Birthday Belle!


It’s Wednesday, and this week I’m sharing a CAS card featuring Birthday Belle – T076 from (High Hopes Rubber Stamps) with the sweet sentiment Bummer – H263 (High Hopes Rubber Stamps). Our birthday girl this week isn’t too keen on having another birthday to remind her how old she is, but she is still having fun blowing out all of the candles. LOL! I decided to colour her outfit and cake pink, because I remember how much my grandmother loved that colour.

To create the card this week, I stamped the main image and then coloured it in with Copic Markers. My Creative Time -Stitched Squares Inside and Out die and my Cutttlebug were used to cut out the main coloured image and the hot pink background paper.

For the base card I cut some yellow cardstock 10″ long by 5″ high. It was then scored and folded in half to be 5″ x 5″. All of the edges for the base card and die-cuts were then inked around using the various Tim Holtz Distress inks listed below. I mounted the hot pink cardstock directly to the base using double-sided tape. Then the main image was popped up with 3M VHB – 2 sided tape. Finally, to finish it off, I used some crafty dots by Crafts.

Card Recipe:

Stamp: Birthday Belle – T076 (High Hopes Rubber Stamps)

Sentiment: Bummer – H263 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Tim Holtz Distress Ink – Fossilized Amber, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hot Pink Cardstock, Yellow Cardstock

Die Cuts: My Creative Time -Stitched Squares Inside and Out

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, Crafts Stickers – 02-3010802

Image coloured with Copic Markers:

Skin,Lips and Eyeshadow: E21, E11, E04, E00, E000, R22, R20, YG09, YG06, YG03

Hair: N5, N3, N1

Blouse and Cake Icing and Earring Pinks: RV09, RV06, RV04, RV02, RV00, RV000

Cake Flowers, Leaves and Trim : G17, G14, G07, Y38, Y19, Y18, Y04, BG32, BG13, BG10

Balloons: BG34, BG18, BG15, BG10, RV09, RV06, RV04, RV00, Y38, Y19, Y04, Y00

Candles: BG34, BG13, BG10, YR14, Y19, Y04, Y00

Hat: RV09, RV06, RV02, BG34, BG10

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Peace and Joy!!


Today I’m sharing Candy Cane Corner Frame from KLM Digital Designs new September release. I decided to try something different with this image and printed it out on Recollections – Christmas Inkjet Printable Glitter Paper. Then it was coloured in with Copic Markers. This beautiful stamp comes with the Candy Cane image and 4 sentiments: “Peace & Joy”, “Season’s Greetings”, “Happy Holidays” and “Merry & Bright”.

Started out with a card base of 5.5″ x 4.25″. My Creative Time – Rectangle Frame Dies and My Creative Time – Rectangle Frame Die Layers – MCT-D274 were used to create the various layers. Creative Expressions – Craft Dies by Sue Wilson – Festive Collection – Holly and Berry Border were used to create the small holly and leaves in the right corners using my Cuttlebug and Crafts – Green Glitter Cardstock paper. The top layer was die-cut and then a ruler and craft knife were used to cut the top and bottom of the image.

I popped up all of the layers with 3M VHB – 2 sided tape, except for the bottom layer, which was applied with 2-sided tape.

Card Recipe:

Stamp and Sentiment: Candy Cane Corner Frame (KLM Digital Designs)

Inks: HP Printer Grayscale

Paper: Recollections – Christmas Inkjet Printable Glitter Paper – 8.5″ x 11″, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Crafts – Glitter Cardstock 02-3068425

Die Cuts: Creative Expressions – Craft Dies by Sue Wilson – Festive Collection – Holly and Berry Border, My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Die Layers – MCT-D274

Tools: 3M VHB – 2 sided tape,  Cuttlebug

Image coloured with Copic Markers:

Leaves: YG67, YG03, G99

Ribbon: BG18, BG15, BG11

Candy Cane: R59, R29, R24

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Witchy Poo’s Happy Hallowe’en!!!


It’s Wednesday, and Sitting Witchy Poo from (High Hopes Rubber Stamps) is back again to celebrate a Happy Hallowe’en and wondering what to do with all her candy.  My husband and I just LOVE Hallowe’en! We try to decorate our yard every year for the little ghosts and goblins who come to visit and we give out lots and lots of candy. Our front lawn gets turned into a grave yard for a day with spooky black cats, crows, skeletons, and more. On the porch we put out all of the animated little toys and of course the talking skeletons playing poker at the Bistro table. LOL! The children just love it and so do the parents! LOL!

To create the card this week, I stamped the main image and then coloured it with Copic Markers listed below. I fussy cut around Witchy Poo leaving just a little bit of white around the top of her body, but going directly to the line for the bottom of her. Flag Banner Dies from Craftin’ Desert Diva’s (restired) were used for the die cut and then the sentiment was stamped onto it. Tim Holtz Distress Ink – Carved Pumpkin was applied around the edges to create a frame around the orange cardstock.

To create the background, Pebbles – Boo! paper was used. I wanted to add something a little extra so I pulled out my Kraftin’ Kimmie – Bats and Moons Stencil and applied Nuvo Glimmer Paste – Amethyst Purple! I just love the way it turned out. The bottom piece of cardstock was cut at 1″ x 5.5″. Tim Holtz Distress Ink – Black Soot was used to go around all of the edges of the top and bottom piece.

Once everything was dry my card was ready to be assembled. I began with a standard white card base of 4.25″ x 5.5″. I mounted the coloured circles and bats cut at the same size directly on top of the base with 2-sided tape. I did the same with the candy on the very bottom. The image and the sentiment were both popped up with 3M VHB – 2 sided tape. Finally, to cover some of my paste boo-boos, I added in some candy corn from Dress My Craft – Dessert Mix.

Card Recipe:

Stamp: Sitting Witchy Poo – S151 (High Hopes Rubber Stamps)

Sentiment: Happy Halloween – H232 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Carved Pumpkin, Tim Holtz Distress Ink – Black Soot

Paper: Copic Marker X-Press It Blending Card, Pebbles – Boo! (6×6 in / 15.2×15.2 cm), Orange cardstock, White Cardstock

Die Cut: Craftin Desert Diva’s – Flag Banner Dies (Retired)

Stencil: Kraftin’ Kimmie – Bats and Moons

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, Nuvo Glimmer Paste – Amethyst Purple, Dress My Craft – Dessert Mix

Image coloured with Copic Markers:

Skin: BG96, BG93, BG90, YG23, G40

Hair: E18, E08, YR18, YR14

Hat, Blouse, Pantaloons: V17, V09, V06, V04

Vest, Dress and Hat Band: YR68, YR65, YR18, YR15, YR12, YR00

Socks: YR18, YR15, YR12, YG09, YG07

Shoes: V17, V09, V06, V04, N6, N4, N2, E15, Y38, Y35, Y15

Star: E15, Y38, Y35, Y15

Hope you like it and have a spooktacular week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Furry and Bright!!


Today I’m sharing this adorable Gnomes and Pets image from KLM Digital Designs new August release. I just loved this adorable stamp and decided it would make an awesome Christmas card for all of your furry loving friends. Who couldn’t resist those adorable little faces?

I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. The image was coloured in with Copic markers, and my Brother Scan and Cut was used to fussy cut around the image. A black marker was used to go around all of the edges.

For the main background, a green card base of 5.5″ x 4.25″ by The Paper Studio – Christmas Box of Cards 2012 Collection was used. Recollections – “Jolly Holiday” paper was cut at 5.5″ 2.25″ x and Recollections – Christmas Pets was cut at 5.5″ x .5″ twice. Glue was used to adhere each panel to the base card. The sentiment was stamped using Versa Fine – Onyx Black and embossed with Ranger – Clear Super Fine Detail embossing powder and heat embossed using Marvy Uchida – Embossing Heat Tool. Along the bottom, Marvy Uchida Snow Marker was applied and while still wet, Martha Stewart Crafts – Crystal Fine Glitter was applied. To make it fluffy, Marvy Uchida – Embossing Heat Tool was used.

I popped up the image with 3M VHB – 2 sided tape. The little black and white kitty from Dress It Up – Kitten Kaboodle was added to complete the card.

Card Recipe:

Stamp: Gnomes and Pets (KLM Digital Designs)

Sentiment: My Favourite Things – Happy Pawlidays

Inks: HP Printer Grayscale, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Recollections – “Jolly Holiday” – 6″ x 6″ paper pad, Recollections – Christmas Pets – 6″ x 6″ paper pad, The Paper Studio – Christmas Box of Cards 2012 Collection

Embosssing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: 3M VHB – 2 sided tape, Martha Stewart Crafts – Crystal Fine Glitter, Marvy Uchida – Embossing Heat Tool, Dress It Up – Kitten Kaboodle, Marvy Uchida Snow Marker 3MM

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W5, W4, W3, W2, W1, W0, W00

Shirt: G99, G21, YG67, YG17

Pants: B26, B23, B21

Hat: R59, R39, R37, R35

Boots: E29, E27, E25, E23, E21

Dog: E37, E35, E33, E31, E23, E15, C7, C5, C3, C2, C1, Black, R22, R02, R00, Gelly Roll Sakura #8 Pen, Sakura Glaze – Black

Cat: C9, C7, C5, C4, C3, C1, R22, R02, R00, YG05, Sakura Glaze – Black

Hope you like it and have a great week!

KLM is having a LABOR DAY SALE.
You should check it out. Special is available until September 20, 2020.
15% OFF ALL CLEAR STAMPS
CODE: LABORDAY

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Happy Trick or Treating!


It’s Wednesday, and today I’m sharing a CAS card using Witchy Poo with Kitty Frame – P120 (High Hopes Rubber Stamps) for the main image and Trick or Treat Greeting – H231 (High Hopes Rubber Stamps) for the sentiment. Witchy Poo and Kitty are looking out to see all of the wonderful little trick or treaters coming to visit them for their treats! What are you dressing up as this year?

To make the card, I started with a 5.5″ x 4.25″ cards base. My Mind’s Eye – Dolled Up – 6″ x 6″ was cut to the same size and adhered to the base card with double-sided tape. Tim Holtz Distress Ink – Walnut Stain ink was used to edge across the bottom of the card. The image was stamped and then coloured in with Copic Markers. I used my Brother Scan and Cut to cut around the image and then used a black marker to go around all of the edges.

The sentiment was stamped and then die cut with Essentials by Tattered Lace Dies – Easel Slider. Tim Holtz Distress Ink – Carved Pumpkin and a black marker were used to ink all of the 4 sides of the sentiment.

The coloured image and sentiment were popped up onto the card using 3M VHB – 2 sided tape and some stickers were add for embellishments.

Card Recipe:

Stamp: Witchy Poo with Kitty Frame – P120 (High Hopes Rubber Stamps)

Sentiment: Trick or Treat Greeting – H231 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Carved Pumpkin, Tim Holtz Distress Ink – Walnut Stain

Paper: Copic Marker X-Press It Blending Card, My Mind’s Eye – Dolled Up – 6″ x 6″, Orange Cardstock

Die Cut: Essentials by Tattered Lace Dies – Easel Slider

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Hallowe’en Stickers – HCM0001F, HCM0001C, HCM0001A, Brother Scan and Cut

Image coloured with Copic Markers:

Skin: BG96, BG93, BG90, YG23, G40, R22, R20

Hair: E18, E08, YR18, YR14

Hat and Dress: V25, V17, V15, V09, V06, V04, YR68, YR65, YR18, YR15, YR12, YR00, Gelly Roll Sparkle Pen for Swirls

Cat: C9, C7, C5, C3, YG09, YG07, YG03, Y02, R22, R02, R00

Moon and Stars: V17, V15, V09, V06, V04

Window Background: E15, Y38, Y35, Y15, Y06

Window Frame: E29, E25, E23

Hope you like it and have a spooktacular week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Saying Hi!


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing Mix and Match Clear Stamps – DCS 19093 (Dreamerland Crafts) for the images and sentiment that I used to create this little scene. I just love how you can used these little stamps to create a variety of scenes. To colour my card this week, I thought I would try using Zig Clean Color Real Brush Markers. I normally colour with Copic markers, so this was a bit of a challenge for me.

To make this card I used a base card of 4.25″ x 5.5″ by Hot Buy – Recollections – Watercolour Solids. The sentiment was stamped directly onto the background paper using my MISTI, VersaMark ink and Ranger Embossing Powder White – Extra Fine Detail. The powder was then heat embossed with Marvy Uchida – Embossing Heat Tool.

Strathmore – Watercolor Paper – 140 lb. was die cut using my Cuttlebug and dies from My Creative Time -Stitched Squares Inside and Out. For the images, I used my MISTI and Kraftin’ Kimmie – Wicked Black Ink.  I created a mask of the bear’s head using some Post-it Note paper and set it aside. To create the scene it was done in stages. First the bear and the little flower pots were stamped. Then the mask created earlier was put overtop of the little bear as show below. The poles, clothesline and grass were then stamped next.

Lastly, the T-Shirts, birds and clouds were stamped. Once this was completed, the mask for the bear was removed. The images were coloured in with the colour recipe listed below and Sakura Glaze – Black was used for all of the little eyes. Once the colouring was all completed, the finished scene was mounted directly to the base with 2-sided tape. Kraftin’ Kimmie – Lovely Dots were added to put a finishing touch on the card.

Card Recipe:

Stamps and Sentiments:  Mix and Match Clear Stamps – DCS 19093 (Dreamerland Crafts)

Inks: Kraftin’ Kimmie – Wicked Black Ink, VersaMark, Sakura Glaze – Black

Paper: Strathmore – Watercolor Paper – 140 lb., Hot Buy – Recollections – Watercolour Solids

Die Cuts: My Creative Time -Stitched Squares Inside and Out

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, Kraftin’ Kimmie – Lovely Dots

Image coloured with Zig Clean Color Real Brush Markers:

Bear: No. 64 – Oatmeal, No. 61 – Light Brown, No. 201 – Pink Haze, No. 26 – Light Pink

Sky:  No. 31 – Cobalt Blue, No. 36 – Light Blue

Clouds: No. 99 – Cool Gray 1, No. 90 – Gray

Grass: No. 47 – May Green, No. 41 – Light Green

Poles: No. 58 – Deep Brown, No. 62 – Dark Brown, No. 66 – Dark Oatmeal

Flowers: No. 61 – Light Brown, No. 52 – Bright Yellow, No. 55 – Pale Yellow,

Watering Can: No. 090 – Gray

Birds: No. 32 – Persian Blue, No. 30 – Blue

T-Shirts: No. 84 – Deep Violet, No. 83 – Lilac

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Birthday Sentiments For Ewe


Today I’m sharing  Sheep and Sentiments (KLM Digital Designs) image from KLM Digital Designs new September Release. These little “Ewes” are so fun to colour up and I just love their adorable expressions. This stamp comes with 3 sentiments, 2 of which I have used in the cards below and also “Wooly Hope Ewe Feeling Better”! I wooly love this stamp set and I’m sure you will too! LOL!

 

I printed out the main images onto Copic Marker X-Press It Blending Card using my HP Printer. The image was then die cut with my Cuttlebug and My Creative Time -Stitched Squares Inside and Out. Both of the images were then coloured in with Copic Markers. For both cards, Hot Buy – Recollections – Watercolour Solids Cards & Envelopes – 5.5″ x 4.25″, Doodle Bug Designs Inc. – Down on the Farm – 6″ x 6″ paper pad were used to create the backgrounds. I edged around the printed backgrounds with Tim Holtz Distress Ink – Evergreen Bough ink.

My Creative Time – Rectangle Frame Dies Layers were used to die-cut the background paper for the 2nd card. The sentiments were both printed out onto Recollections – White card stock and then fussy cut. They were then placed onto some Dark Yellow Cardstock and fussy cut around again. All of the layers were now ready to be assembled. The image, background layer and sentiments were all popped up with 3M VHB – 2 sided tape. Some Kraftin’ Kimmie Dots – Neon Rainbow were added to the 1st card.

Card Recipe:

Stamp: Sheep and Sentiments (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hot Buy – Recollections – Watercolour Solids Cards & Envelopes, Doodle Bug Designs Inc. – Down on the Farm – 6″ x 6″ paper pad

Die Cuts: My Creative Time – Rectangle Frame Layers, My Creative Time -Stitched Squares Inside and Out

Tools: 3M VHB – 2 sided tape, Kraftin Kimmie Dots – Neon Rainbow

Image coloured with Copic Markers:

Sheep: B60, C5, C3, C1, R21, R02, R01, YG09, YG07, Colorless Blender

Grass: YG17, YG13, YG03, YG01

Sky and Clouds: B60, B02, B01, B00, B000, B000, C0, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Stuffed with Love


It’s Wednesday, and this week, I used Angel Bear Scarecrow – T110 (High Hopes Rubber Stamps) for the main image and Scarecrows Stuffed – H087 (High Hopes Rubber Stamps) for the sentiment. The turkey is hiding behind the angel bear for protection from becoming captured. He doesn’t want to become someone’s Thanksgiving Dinner. The crows are shrugging their shoulders, because they are just not sure what’s going to happen! Let’s hope this little angel bear can protect him. LOL!

To make my card this week, I started out with a simple white card base, sized at 5.5″ x 5.5″. The base background was also cut at 5.5″ x 5.5″ using PhotoPlay – Mad 4 Plaid Fall paper. The added touches at the top and bottom are also from the same paper pad.

The main image was stamped onto Copic Marker X-Press It Blending Card and then die cut with My Creative Time – Rectangle Frame Dies Layers. It was coloured in with Copic Markers and Sakura Glaze – Black pen was used for the eyes and nose. The layer behind the image was die cut from green cardstock using My Creative Time – Rectangle Frame Dies. The sentiment square was die cut using orange cardstock and My Creative Time -Stitched Squares Inside and Out. The image and sentiment were popped up on top of the remaining layers with 3M VHB – 2 sided tape and some Kraftin’ Kimmie Dots were added to finish the card off.

Card Recipe:

Stamp: Angel Bear Scarecrow – T110 (High Hopes Rubber Stamps)

Sentiment: Scarecrows Stuffed – H087 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, PhotoPlay – Mad 4 Plaid Fall paper 6″ x 6″, Green Cardstock, Brown Cardstock

Die Cuts: My Creative Time – Rectangle Frame Dies Layers, My Creative Time – Rectangle Frame Dies, My Creative Time -Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Kraftin Kimmie Dots, Sakura Glaze – Black

Image coloured with Copic Markers:

Bear: E35, E34, E33, E31, E30, R21, R02, R01

Wings: E53, E51, E50

Shirt: YG67, YG61, R37, R24

Pants: B26, B23, B21

Bow Tie, Patch, Hat Brim: R59, R37, R35, R24

Turkey: E35, E34, E33, E31, YR18, YR16, YR12, YR02, R59, R37, R24, Y38, Y18

Pumpkin and Stem: YR18, YR16, YR12

Straw: E34, YR23, Y23, Y21

Crows: C9, C7, C5, Y38, Y18

Flower: Y38, Y35, Y18, YG17, YG13, YG03, YG01

Grass and Greenery for Plants: YG17, YG13, YG03, YG01

Clouds and Sky: B60, B02, B01, B00, B000, C0, Colorless Blender

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.