Archives

Snowy Smiles!!!

Dec13

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Snowy Smiles – RR003 for the main image. Winter is one of my favourite times of the year and the beauty of fresh snowfalls always make me happy as long as I don’t need to shovel. LOL!

To make my card this week, I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Crafts – Sparkling Stickers – 02-3068629 was applied to the base card. I cut out Heartfelt Creations – Celebrate the Season Collection paper and inked around the edges with Tim Holtz Distress Ink – Wilted Violet and a finger dauber. This was popped up onto the base card using U-Line double-sided tape.

The image was stamped using my MISTI and Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card cardstock. I coloured in the image and then fussy cut around it. With a black marker, I inked around the outside of the image and then added U-Line double-sided tape and popped it up into the centre of the circle on the patterned paper. I applied the Crafts – Sparkling Stickers – 02-3068629 to a scrap piece of Hammermill – Premium Colour 100 lb. cardstock to match the background base paper.

With my Cuttelbug and Birch Press Designs – Big Joy dies, I die cut the sparkly scrap piece of paper and another scrap piece of Hammermill – Premium Colour 100 lb. cardstock. I coloured in the larger die cut with Copic markers and then attached the 2 pieces using liquid glue. U-Line double-sided tape was added to the combined piece and it was popped up onto the card under the snowlady.

I cut off the backs to 3 buttons from the Dress It Up – Holiday Collection – It’s Cold Outside and then applied Nuvo – Glacier Paste – Pixie Wings to them to give them a purple shimmer. Once the glacier paste was dry, I attached them to the card with liquid glue.

Card Recipe:

Stamp: Snowy Smiles – RR003 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Wilted Violet

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Heartfelt Creations – Celebrate the Season Collection (12″ x 12″), Crafts – Sparkling Stickers – 02-3068629

Die Cuts: Birch Press Designs – Big Joy (57164)

Tools and Embellishments: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Nuvo – Glacier Paste – Pixie Wings, Dress It Up – Holiday Collection – It’s Cold Outside

Image coloured with Copic Markers:

Snowlady: BV20, B0000, YR68, YR31, YR18, Y38, R59, R35, R30, R21, Colorless Blender

Hat and Scarf: BG72, BG57, BG32, BG11, BG10, BG000, Colorless Blender

Circle Framing Snowlady: V17, V15, V12, BG000

Shadow Die Cut: V17, V15, V12

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Snowmen – Winter Fun!!

Dec6

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Snowman Dash – TT054 for the main image and Winter Fun! – F109, for the sentiment. Growing up in the North, we couldn’t wait to get home from school to go sledding down the hills across the street or behind our house. There was so much snow that the snowbanks the plows created were just the perfect height for us to have loads of fun! On the weekends, we would go to the much larger hills!

To make my card this week, I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. I inked around the edges with a blender brush and blue ink that I still had on it from a previous project. I don’t clean off my brushes because I have dedicated brushes for each colour group.

The image was stamped onto the inner die cut using my MISTI and Memento – Tuxedo Black ink, which I had die cut using my Cuttlebug and paper from Copic Marker X-Press It Blending Card cardstock with MFT – Stitched Rec Scallop Frame dies. I coloured in the image and then added the sentiment using a MISTI, VersaMark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat embossed using a Marvy Uchida – Embossing Heat Tool. The snow in the sky was created using a Gelly Roll Sakura #10 Pen and UNIPosca PC-3M White marker. Stickles – Star Dust was added to the snow on the hill and Cosmic Shimmer Fluffy Stuff and DecoArt Glamour Dust were added to give some texture to the snow where the sled had been. A Marvy Uchida – Embossing Heat Tool was used to fluff up the Cosmic Shimmer Fluffy Stuff. Once the Stickles was all dry, I pieced the 2 die cuts back together using Scotch tape on the back. U-Line double-sided tape was added to the combined piece and it was popped up onto the card.

Card Recipe:

Stamps: Snowman Dash – TT054 (High Hopes Rubber Stamps)

Sentiment: Winter Fun – F109 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Die Cuts: Die-namics – Exclusive Designs for “My Favourite Things” – Stitched Rec Scallop Frame – MFT-860

Tools and Embellishments: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Stickles – Star Dust, Cuttlebug, DecoArt Glamour Dust, Cosmic Shimmer Fluffy Stuff, UNIPosca PC-3M White marker, Marvy Uchida – Embossing Heat Tool, Blending Brush

Image coloured with Copic Markers:

Snowmen: BV20, B0000, YR68, YR31, Y38, R59, R235, 100, W9, W7, W5, Colorless Blender

Snowman1 Mittens and Scarf: BV08, BV13, BV02, BV01, BV00

Snowman2 Mittens and Scarf: BG75, BG57, BG49, BG13, BG11, BG10

Snowman3 Hat and Mittens: R59, R46, R37, R35, R14, R08

Sled: E49, E47, E39, E37, E35, E34

Sky: B06, B05, B04, B02

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Noel!!

Nov22

It’s Wednesday, and this week, I made a CAS Christmas card using High Hopes Rubber Stamps Woodland Stocking – TDG011. We always had stockings under the tree filled with goodies and our names on each of the stockings. Even our dogs had their own stockings growing up. LOL!

To make my card this week, I began with a card base of 6″ x 6″ using AC Cardstock – White. I adhered Recollections – Christmas Cottage 6 in. x 6 in. cardstock to the base front using double-sided tape. Using my Cuttlebug and paper from Copic Marker X-Press It Blending Card, I die cut the frame with Waffle Flower – Nesting Square dies. The image was stamped onto the die cut using my MISTI and Memento – Tuxedo Black ink. I coloured in the image and then inked around the edges with a NUVO Glitter Marker – Golden Honey. I added some U-Line double-sided tape to the back of the coloured image and popped it up into the centre of the diamond. To finish off the card, I added 4 pop dots from YNS – Happy Harvest Gumdrops.

Card Recipe:

Stamps: Woodland Stocking – TDG011 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Pine Needles

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Recollections – Christmas Cottage (12″ x 12″)

Die Cuts: Waffle Flower – Nesting Square dies

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, NUVO Glitter Marker – Golden Honey, Cuttlebug, YNS – Happy Harvest Gumdrops

Image coloured with Copic Markers:

Cheeks: RV00, RV000

Eyes and Noses: Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Snowman: BV20, B0000, Y38, YR31, C9, C7, C5, B04, B02, B01, Colorless Blender

Owl: E55, E53, E51, W0, W00, Y38, YR31

Fox: E99, E97, E08, N1, N0, R02, R01

Penguin: C9, C7, C5, C3, E42, E41, YR31, Y38

Reindeer: E51, E50, E33, E31, E30, E29, E27, E25, E23, E21, R02, R01

Noel and Ribbon: YR27, YR23, Y15, Y11, Y00

Tree Branch and Pines: E29, E25, E23, G49

Holly, Leaves and Pine Needles: G99, G29, G21, YG67, YG17, R89, R27, R24

Sock: B04, B02, B01, B00, R59, R37, R35, C1, G29

Ribbon: R59, R37, R35

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Winter Friends!!

Nov15

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Winter Friends – TT048 for the main image and Jingle All the Way – H040, for the sentiment. Snowmen are one of my favourite images to colour and how adorable is this happy snowman singing to his little friend?

To make my card this week, I began with a card base of 6″ x 6″ using AC Cardstock – White. I adhered American Crafts – “Kringle and Co” 6 x 6 in. cardstock to the base front. Red and green cardstock were cut to the sizes of 6″ x 1.25″ and 6″ x 1-1/8″ from some spare paper I had. I adhered the green to the red using double-sided tape and some glue to allow me to centre it. The combined strip was put through a Xyron Create a Sticker to keep it flat. I added this combined strip to the card approximately a .25″ up from the bottom. Tim Holtz Distress Ink – Rustic Wilderness was used to ink around all of the edges of the card and it was set aside to dry.

Using my Cuttlebug and paper from Copic Marker X-Press It Blending Card, I die cut the frame with Gina Marie Designs – Loopy Oval die cuts. The image was stamped onto the die cut using my MISTI and Memento – Tuxedo Black ink. I coloured in the image and then added the snow in the sky using a Gelly Roll Sakura #10 Pen. Stickles – Crystal was added to the snow on the ground and along the branches to give it some sparkle.  I set the image to the side to allow the Stickles time to dry.

I cut a piece of Recollections Christmas Ink Jet Printable Glitter Paper to the size of 4″ x 1″. Using my MISTI once again, I stamped the sentiment onto it using Memento – Tuxedo Black ink and then cut a fish tail on each end. U-Line double sided tape was added to the back of the sentiment and then it was popped up and centred in between the red and green stripe. U-Line double-sided tape was added to the back of the image and it was popped up onto the card above the sentiment once the Stickles had dried. Lastly, I die cut 2 pinecones and some pine leaves using my Cuttlebug and dies from Stampin’ UP! – Pretty Pines Thinlets die set. Liquid glue was used to pieced them altogether. I adhered these to the 2 upper corners of the card and then applied some Stickles – Crystal to the leaves to finish off the card.

Card Recipe:

Stamps: Winter Friends – TT048 (High Hopes Rubber Stamps)

Sentiment: Jingle All the Way – H040 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, American Crafts – “Kringle and Co” 6 x 6 in. (15.2 cm x 15.2 cm), Recollections Christmas Ink Jet Printable Glitter Paper

Die Cuts: Gina Marie Designs – Loopy Oval, Stampin’ UP! – Pretty Pines Thinlets (141851)

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Stickles – Crystal, Cuttlebug, Xyron Create a Sticker

Image coloured with Copic Markers:

Snowman: BV20, B0000, YR68, Y38, Y18, R29, R24, RV00, Colorless Blender

Snowman Hat, Mittens and Scarf: G99, GY67, YG63, YG61, R59, R37, R35

Snowman Boots and Buttons: C9, C7, C5, C3

Bird: R46, R14, R08, Y17

Bird Hat and Scarf: G99, YG67, YG63, R59, R37, R35

Bells: YR27, YR23, Y15, Y11, Y00

Tree Branch and Pines: E29, E25, E23, G49

Snow: BV20, B0000, Colorless Blender, Gelly Roll Sakura #10 Pen, Stickles – Crystal

Sky: B04, B02, B01, B00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Snow Kisses!!

Oct18

It’s Wednesday, and this week, I made a snow lady Christmas card using High Hopes Rubber Stamps Snow Kisses – TT059 for the main image and Holly Jolly – K048 for the sentiment. I’ve always loved snow people and birds and this stamp combo makes me smile because it has both.

To make my card this week, I began with a card base of AC Cardstock – White, cut and scored to be 6″ x 6″. I cut 2 strips of Doodlebug Design Inc. – Winter Wonderland coloured snowflake pattern to the size of 6″ x .75″. 2 strips of Doodlebug Design Inc. – Spring Solid Assortment paper to the size of 6″ x .25″ and 1 strip of Forever In Time – Textura Sky cut to the size of 6″ x 4″. With Tim Holtz Distress Ink – Evergreen Bough and a blending brush, I inked around all of the edges of the larger pieces. I ran all of the smaller pieces through my Xyron Create a Sticker. The pieces were then attached to the base card from top to bottom. I used liquid glue to attach the larger piece. I trimmed around the 3 sides of the card with a paper trimmer to make it all even.

For the frame around the image, using my Couture Creations – Go Power and Emboss die cutting machine, I die cut the entire frame with Doodlebug Design Inc. – Winter Wonderland paper and Penny Black – Graceful Stackers dies. 2 dies were pieced together for the pink frame using my cutting device and Forever In Time – Textura Blush cardstock. Lastly, I stamped the image with Memento – Summer Sky ink onto Lawn Fawn – Sparkle Cardstock in “Pixie Dust” using my MISTI. I took this piece and ran it through my Couture Creations – Go Power and Emboss die cutting machine again so that it would fit snug into the frame. I cut off the remainder following the stamped snow along the top and inked it with the Memento – Summer Sky ink. Using liquid glue, I applied the pink frame over top of the snowflake die cut while carefully matching up the edges. Liquid glue was applied to the lower back of the snow piece and it was attached to the snowflake background inside the frame.

The image was stamped onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. After colouring the images, I fussy cut around all of them and then with a black marker, inked around all of the edges. I popped up the snowlady using U-Line double-sided tape and attached her to the card under the snow. The little bird was also popped up using U-Line double-sided tape and some liquid glue. Using Copic B41, I added in some shadows in the snow and Stickles – Hibiscus was applied to the scarf and pompom to give them some extra sparkle.

The sentiment was stamped onto Doodlebug Design Inc. – Spring Solid Assortment using my MISTI and Versamark ink. Ranger Embossing Powder White – Extra Fine Detail was applied and then heat embossed using a Marvy Uchida – Embossing Heat Tool. Using my Cuttlebug and My Creative Time – More Stitched Circles, I die cut the sentiment. The edges were inked around using a finger dauber and Tim Holtz Distress Ink – Evergreen Bough. The snowflake was cut using my Cuttlebug, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” cardstock and die from Recollections – Christmas Snowflakes Clear Stamp & Die set. I popped up both the sentiment and snowflake using U-Line double-sided tape onto the card. Lastly, I added 3 Doodlebug Designs Inc. – Sprinkles onto the frame to finish it off.

Card Recipe:

Stamps: Snow Kisses – TT059 (High Hopes Rubber Stamps)

Sentiment: Holly Jolly – K048 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Versamark, Memento – Summer Sky

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Doodlebug Design Inc. – Winter Wonderland (6″ x 6″), Doodlebug Design Inc. – Spring Solid Assortment (12″ x 12″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Forever In Time – Textura Sky, Forever In Time – Textura Blush

Die Cuts: Penny Black – Graceful Stackers (51-658), My Creative Time – More Stitched Circles MCT-D136, Recollections – Christmas Snowflakes Clear Stamp & Die 529291

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Stickles – Hibiscus, Cuttlebug, Blending Brush, Doodlebug Designs Inc. – Sprinkles, Xyron Create a Sticker, Couture Creations – Go Power and Emboss, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Snow Lady: BV20, C00, Colorless Blender, YR18, YR12, YR07, YR04, R29, R27, R24, Eyes (Sakura Glaze – Black), Stickles – Hibiscus

Mitt’s, Coat and Hat: BG72, BG57, BG32, BG13, BG11

Scarf and Trim: RV69, RV09, RV06, RV04, RV02

Birds and Earmuffs: B97, B95, B93, B91, R46, R14, R08, YR12, YR07, YR04, R85, R83, R81, RV55, RV17, RV14, BV02, BV01, BV00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

You Got This!!

Jan26

It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Lasso Some Snow – TDG021  for the main image and Don’t Worry – FDG021 for the sentiment. We all need a little bit of encouragement every now and then and this little snowman is here to give us some.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I used Echo Park Paper Co. – My Favorite Winter cardstock cut to the same size as the base card for the background. I attached this to the base using double-sided tape. Using my Cuttlebug, a mixture of square dies from My Creative Time -Stitched Squares Inside and Out and Waffle Flower – Nesting Square dies, I die cut cardstock from Scrapbook.com Neutrals Smooth Cardstock and also Copic Marker X-Press It Blending Card. I applied double-sided tape to the back of the tan square and applied it directly to the background. U-Line double-sided tape was added to the back of the dark brown square and popped up onto the centre of the tan square.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock square and coloured it in with Copic markers. Gelly Roll Sakura #10 Pen was used to create the snow in the sky. Sakura Glaze – Black and Gelly Roll Sakura #5 Pen were used on the eyes of the snowman. I applied U-line douhble-sided tape to the back of the completed image and popped it up onto the centre of the dark brown square.

With my MISTI and Memento – Tuxedo Black ink, I stamped the sentiment onto Recollections – White cardstock and then die cut it out using my Cuttlebug and My Creative Time – Ribbon End Dies. I inked around the edges using Copic – E59 marker to give it a dark brown border. I used my knife to remove the double border from the piece left behind and then traced the shape of the ribbon onto the remaining piece of Scrapbook.com Neutrals Smooth Cardstock. I cut this out with my cutter and scissors. U-Line double-sided tape was applied to both pieces and the completed sentiment was popped up onto the card below the main image to complete the card.

Card Recipe:

Stamp: Lasso Some Snow – TDG021 (High Hopes Rubber Stamps)

Sentiment: Don’t Worry – FDG021 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Echo Park Paper Co. – My Favorite Winter (6″ x 6″), Scrapbook.com – Neutrals Smooth Cardstock (5.5″ x 4.25″), Recollections – White cardstock

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Waffle Flower – Nesting Square dies, My Creative Time – Ribbon End Dies

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Cuttlebug

Image coloured with Copic Markers:

Snowman: B60, C9, C7, C5, C00, E49, YR18, YR16, YR12, Colorless Blender (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Hats, Mitts and Scarf: B99, B977, B95

Coat: E51, E50, E37, E35, E34, E33, E31

Birds: E59, E37, E35

Fence: E29, E27, E25, E23, E21

Wheel and Rope: E77, E74, E47, E44, E43, Y35, YR31

Sky: B04, B02, B01, B00

Snow: B000, B60, C00, Colorless Blender, Stickles – Diamond

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.