Archives

You’re How Old??


Sharing a CAS birthday card that I made today using KLM Digital DesignThinking Gnome from the new November 2022 release. This image comes with 2 other sentiments as well, “Just thinking of you” and “Thinking of you makes my day”. This little gnome is thinking really hard to figure out how old you are this year! LOL!

To make my card this week, I started with a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. Echo Park – Happy Birthday paper was cut to the same size and adhered directly to the base using double-sided tape! The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image and then fussy cut around it. I ran it through my Xyron Create a Sticker and placed it onto a small piece of Recollections – Black cardstock and fussy cut around it again. Using a Cuttlebug and dies from Sizzix Framelits – Banner Dies, I die cut the sentiment and a larger banner using Echo Park – Happy Birthday paper. With a blender brush, I inked over the sentiment die cut to give it a shade of green colour. With Tim Holtz Distress Ink – Pine Needles and a finger dauber, I inked around the 2 banners and all around the card. The larger banner was adhered directly to the card using liquid glue. The image and sentiment were both popped up onto the card using U-Line double-sided tape. YNS Gumdrops – Tropical Paradise were added to the card to finish it off.

Card Recipe:

Stamp and Sentiment:  Thinking Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Pine Needles

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Echo Park – Happy Birthday (6″ x 6″), Recollections – Black cardstock

Die Cuts: Sizzix Framelits – Banner Dies -561152

Miscellaneous: U-Line double-sided tape, Cuttlebug, Xyron Create a Sticker, YNS Gumdrops – Tropical Paradise

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E47, E44, E43, E41

Shirt and Socks: BG72, BG57, BG32, BG11, Gelly Roll Sakura #5 Pen

Jeans: B26, B23, B21

Hat and Boots: C7, BG78, BG75

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Paw-sitively Good!


It’s day 5 of the 2022 Cat Lovers Hop and today I’m sharing a Christmas card I made using Your Next Stamp –  Meowy Christmas – CYNS681. Having so much fun with this amazing hop and look forward to it every year.

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background to be the same size using My Favourite Things – Pawsome Prints paper and adhered it directly to the base using double-sided tape. Using my Cuttlebug, Creative Expressions – Festive Collection – Bold Snowflake Frame dies and Recollections – Blue Hues Shimmer Cardstock, I cut out the large snowflake and frame. Using some scrap dark blue paper, I die cut the large outline. I tore along the top of a small piece of Recollections – Christmas Inkjet Printable Glitter Paper and then die cut it with the larger cirlce die from the same die set. Using Tim Holtz Distress Ink – Faded Jeans and a finger dauber, the edges were inked all around the base card. With liquid glue, I attached the large snowflake to the background border. I then attached the snow piece that I had cut previously with liquid glue as well. Then, using a Gelly Roll Sakura #10 Pen, I coloured in some snow in the sky.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then I fussy cut around it. I added some U-Line double-sided tape to the image and popped it up into centre of the circle. The shadow was added using B52. The sentiments were both stamped onto the dark blue paper with VersaMark ink and then embossed with Ranger Embossing Powder White – Extra Fine Detail. I cut out the larger sentiment with my cutter and the smaller one using my Cuttlebug and Gina K Designs – Sentiment Strips. I attached U-line double sided tape the sentiments and coloured image frame and popped up everything onto the card base.

U-Line double-sided tape was applied to the backs of three Creative Impressions – Brads – Snowflake – Winter with a double layer. They were all popped up onto the card and then YNS Gumdrops – Firefly Magic Sparkly Gumdrops were applied to the centres to finish the card off.

Card Recipe:

Stamp and Sentiment:  Meowy Christmas – CYNS681 – Your Next Stamp

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Faded Jeans

Die Cuts: Creative Expressions – Festive Collection – Bold Snowflake Frame (CED3077), Gina K Designs – Sentiment Strips

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., My Favourite Things – Pawsome Prints (6″ x 6″), Recollections – Blue Hues Shimmer Cardstock (8.5″ x 11″), Dark Blue paper, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: U-Line – 2-sided tape, YNS Gumdrops – Firefly Magic Sparkly Gumdrops, MISTI (Most Incredible Stamping Tool), Creative Impressions – Brads – Snowflake – Winter, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Cat and Envelope: T9, T7, T5, T4, T3, T1, R21, C1, C0, Colorless Blender

Halo: Y08, Y04

Shadow: B52

Hope you like it and have a great week!

Also entered into https://blog.yournextstamp.com/challenge-191-midnight-comment-for-the-chance-to-win/

 

It’s Paw-ty Time!


It’s day 4 of the 2022 Cat Lovers Hop and today I’m sharing a card I made using Avery Elle –  Birthday Paw-ty Clear Stamps. Having so much fun with this amazing hop and look forward to it every year.

+ Add New Category

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background to be the same size using Echo Park – It’s Your Birthday paper and adhered it directly to the base. Bazzil Cardstock – Jetstream was cut to 3.5″ x 3.5″ and popped up into the centre of the card using U-Line double-sided tape. Copic Marker X-Press It Blending Card cardstock was cut to the size of 3.25″ x 3.25″. Using my MISTI and Memento – Tuxedo Black ink, I stamped the images and sentiment from the Birthday Paw-Ty Clear Stamps stamp set onto the Copic paper. The image was coloured in with Copic markers. U-Line double-sided tape was applied to the back of the die cut and it was popped up onto centre square. YNS Gumdrops – Happy Harvest and some balloons were added to complete the card.

Card Recipe:

Stamp and Sentiment:  Birthday Paw-Ty Clear Stamps – Avery Elle

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Echo Park – It’s Your Birthday (12″ x 12″), Bazzil Cardstock – Jetstream (12″ x 12″)

Miscellaneous: U-Line – 2-sided tape, YNS Gumdrops – Happy Harvest, MISTI (Most Incredible Stamping Tool)

Image coloured with Copic Markers:

Cat: C9, C7, C5, C3, R20

Dog: E34, E33, E31, E29, E27, E23

Hats and Hooray: Y17, Y15, Y13, R46, R14, R08

Presents and Bows: E15, YR24, Y35, Y08, BG72, BG57, BG32, BG11, BG09, BG05, BG02, BG01

Shadow: C2, C1, C00

Hope you like it and have a great week!

Not Tadpoles Anymore!!


Sharing a card I made today using KLM Digital Design –  Frogotful Frog from the new September 2022 release. This image also comes with 3 more sentiments, “Have I Toad you lately that I love you?”, “Sorry, I Frogot!” and “Toadily Happy”. As we get older, we need to keep a sense of humour about aging! I couldn’t resist the sentiment that came with this adorable image, as it is so true. LOL!

 

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I drew a big rock onto the same paper and then coloured both images in and fussy cut around them.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5″ x 5″ card base. Stampin’ UP! – Lily Impressions Designer Series Paper was cut to be the same size and applied to the base using double-sided tape. Bo Bunny – Willow & Sage was cut to the size of 5″ x 1.5″ and then inked around all of the edges with Tim Holtz Distress Ink – Saltwater Taffy. This was applied to the base background with double-sided tape as well. Once again, Tim Holtz Distress Ink – Saltwater Taffy and a finger dauber were used to ink around all of the edges of the card.

U-Line double-sided tape was applied to the back of the rock and the frog. A double layer of the tape was added to the top half of the frog and then both images were popped up onto the card base. The sentiment was put through my Xyron Create a Sticker and then fussy cut. The pieces were adhered to Recollections – Black cardstock. I fussy cut around the sentiment pieces again and applied U-Line double-sided tape to them and popped them up onto the lower half of the card. Using Anna Griffin Empress Mini die-cutting Machine, Lawn Fawn – Stitched Pond Frame and some small scraps of paper, the cat-tails were created. The pieces were put through the Xyron Create a Sticker and adhered to the card behind the rock.

Lastly, to finish off the card, some embellishments were added using Doodlebug Design Inc. – Sprinkles Spring Assortment pop dots and the little frog from Dress It UP – Wild and Wacky.

Card Recipe:

Stamp and Sentiment:  Frogotful Frog – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Saltwater Taffy

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Bo Bunny – Willow & Sage (6″ x 8″), Stampin’ UP! – Lily Impressions Designer Series Paper (12″ x 12″), Recollections – Black cardstock

Dies: Lawn Fawn – Stitched Pond Frame (LF2068)

Miscellaneous: U-Line – 2 sided tape, Gelly Roll Sakura #10 Pen, Doodlebug Design Inc. – Sprinkles Spring Assortment, Dress It UP – Wild and Wacky, Xyron Create a Sticker, Anna Griffin Empress Mini Machine

Image coloured with Copic Markers:

Frog: BG99, G19, G17, G14, YG17, YG06, YG03, YG00, E81, C1, C0, T9 (Eyes: G19, G16, YG03, Y38, C1, C00, Gelly Roll Sakura #10 Pen)

Rock: W8, W6, W4, W3

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

I Smell Birthday Cake!!


Sharing a card I made today using KLM Digital Design –  Ribbiting Frog from the new July 2022 release. This image also comes with 2 more sentiments, “Sometimes you have to kiss a frog to find a Prince!” and “I find you Ribbiting“.

I imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. Using my Cuttlebug and My Creative Time – Rectangle Frame Layers, I die cut the image frame and then coloured in the image with Copic markers. I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. U-Line double-sided tape was applied to the back pf the coloured image and it was popped up onto the base card. I added a piece of cake, YNS Gumdrops – Retro and YNS Gumdrops – Tropical Paradise as embellishments to complete the card.

Card Recipe:

Stamp and Sentiment:  Ribbiting Frog – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Dies: My Creative Time – Rectangle Frame Layers

Miscellaneous: U-Line – 2 sided tape, Gelly Roll Sakura #10 Pen, YNS Gumdrops – Retro, YNS Gumdrops – Tropical Paradise

Image coloured with Copic Markers:

Frog: BG99, G19, G17, G14, YG67, YG17, YG06, YG03, YG00, YG0000, E81, C1, C0, T9 (Eyes: Gelly Roll Sakura #10 Pen)

Shadow: B000, B0000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Birthday Party Girl!!


It’s Wednesday, and this week, I made a birthday card using High Hopes Rubber Stamps Party Girl – TDG034 for the image and Open Happy Birthday – G039 for the sentiment. This little girl loves to dance and celebrate! She is ready for a really nice party to share her birthday with all of her friends.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cut and scored to be 5.5″ x 4.25″. I cut out the background to the same size using Bubbly Girls – Party – Yvonne Creations cardstock. This was applied directly to base card with double-sided tape. Tim Holtz Distress Ink – Salvaged Patina was used to ink around all of the edges of the card.

The image and sentiment were both stamped onto Copic Marker X-Press It Blending Card and coloured in with Copic Markers. Using my scissors, I fussy cut around both the image and sentiment. For the sentiment, I used a black marker to go around the edges to hide the white. Using Copic markers, I tried to match the background as best as I could for the coloured image to blend in. I applied U-Line double-sided tape to all of the pieces and popped them up onto the base card. Lastly, to finish it off, I added in 3 gumdrops from YNS Gumdrops – Pretty Peacock Matte Gumdrops.

Card Recipe:

Stamps: Party Girl – TDG034 (High Hopes Rubber Stamps)

Sentiment: Open Happy Birthday – G039 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salvaged Patina

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Bubbly Girls – Party – Yvonne Creations (6″ x 6″)

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, YNS Gumdrops – Pretty Peacock Matte Gumdrops

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R22, R21, R20

Hair: E47, E44, E43, E41

Dress, Bows, Socks and Lettering: BG72, BG57, BG32, BG11, RV17, RV14, RV11

Shoes: T10, T9, T7, T5, T3

Balloons: BV13, BV11, BV01, BV0000, G17, G14, G00, YG41

Background: YG0000, RV000, RV0000, G14, BG32, RV17, RV14, YG41

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Eat Cake!!


It’s Wednesday, and this week, I made a birthday card using High Hopes Rubber Stamps Cupcake Hedgie – TDG035 for the image and Eat Cake – FDG026 for the sentiment. I think the expression on this little hedgie says it all! Birthdays should always be an excuse to eat some cake! LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I adhered Scrapbook.com – Brights Smooth Cardstock which was the same size as the base to the card using double-sided tape. Using my Anna Griffin Empress Mini Machine die cutting machine, I die cut the cake background paper with Your Next Stamp Designer Pad – Birthday Boy and My Creative Time – Rectangle Frame Layers. Tim Holtz Distress Ink – Blueprint Sketch was then inked around all of the edges. I add some U-Line double-sided tape and popped it up onto the base card. Again, using my Empress die cutter, I die cut some golden yellow cardstock using My Creative Time -Stitched Squares Inside and Out. I added some U-Line double sided tape and added it to the patterned background. Waffle Flower – Nesting Square dies were used to die cut the smaller square out of Copic Marker X-Press It Blending Card and My Creative Time – Bunch of Fun Circle Die was used to die cut the circle from some Red cardstock.

The image and sentiment were stamped onto the Copic Marker X-Press It Blending Card. I coloured in the image with Copic Markers. I added Stickles – Star Dust to the cupcake to make the layers sparkle. A 1.5″ Circle punch was used to cut out the sentiment. U-Line double sided tape was added to the backs of the image and sentiment. I popped up the image onto the smaller square and the sentiment onto the red circle. I added another layer of U-Line double sided tape to the right side of the red circle and a little bit of glue to the left side and popped it up over top of the main image. To finish off the card, I added on some YNS Gumdrops – Firefly Magic Sparkly Gumdrops and YNS Gumdrops – Sugar Rush Sparkly Gumdrops.

Card Recipe:

Stamp: Cupcake Hedgie – TDG035 (High Hopes Rubber Stamps)

Sentiment: Eat Cake – FDG026 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Blueprint Sketch

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Your Next Stamp Designer Pad – Birthday Boy (6″ x 6″), Scrapbook.com – Brights Smooth Cardstock (4.25″ x 5.5″)

Die Cuts: My Creative Time -Stitched Squares Inside and Out, My Creative Time – Rectangle Frame Layers, My Creative Time – Bunch of Fun Circle Dies, Waffle Flower – Nesting Square dies

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Anna Griffin Empress Mini Machine, Stickles – Star Dust, YNS Gumdrops – Firefly Magic Sparkly Gumdrops, YNS Gumdrops – Sugar Rush Sparkly Gumdrops

Image coloured with Copic Markers:

Hedgehog: E53, E51, E50, E49, E44, E43, E42, E41, W4, R30, R20, R08, W4

Cupcake Wrapper: B29, B26, B24, B21

Cupcake: Y17, Y15, Y11, R46, R14, R08, G14, YG23, YG11, B26, B24, B21

Cherry: R89, R59, R39, R21

Ground: E34, E33, E3

Check out our new re-release of some fun images for our “Let’s Celebrate Release”!

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.