Archives

Lighting the Candles!!

Dec7

Today, I’m sharing a Christmas card that I made using Dreamerland Crafts stamp called Lighting the Candles – D15204. This little angel is helping to light the way to a joyous Christmas for all!

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Doodlebug Design Inc. – Winter Wonderland was cut to the same size and applied directly to the base card using double-sided tape. I cut a piece of Recollections – Burgundy to the size of 5.5″ x 2″ and from a scrap piece of patterned paper 5.5″ x 1.75″. Double-sided tape was used to attach the 2 pieces together. These were attached to the base card using double-sided tape.

With my Cuttlebug, I die-cut Crafter’s Companion – Luxury Cardstock – Ice Blue Pack and Copic Marker X-Press It Blending Card cardstock with Creative Expressions by Sue Wilson – Festive Collection – Holly Lattice Frame. U-Line double-sided tape was attached to the larger die-cut and it was popped up onto the centre of the card.

The image was stamped onto the the smaller die-cut using Memento – Tuxedo Black ink, MISTI and Dreamerland Crafts – Lighting the Candles stamp. It was coloured in with Copic markers and Stickles – Star Dust was added to the snow on the ground. For the sky, UNIPosca PC-3M White marker was used for the small snowflakes. Dress It Up – Holiday Collection – Itty Bitty Snowflakes and Dress It Up – Holiday Collection – It’s Cold Outside buttons were placed over top of the images’ snowflakes with liquid glue after I had removed the backing from them. Wink of Stella – Clear was applied to the wings to make them sparkle. I added U-Line double-sided tape to the back of the completed image and popped it up onto the centre of the card.  To complete the card, I placed a PinkFresh Glitter Drops – Lagoon in each corner.

Card Recipe:

Stamp: Lighting the Candles – D15204 – Dreamerland Crafts

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafter’s Companion – Luxury Cardstock – Ice Blue Pack, Doodlebug Design Inc. – Winter Wonderland (6″ x 6″), Recollections – Burgundy

Die Cuts: Creative Expressions by Sue Wilson – Festive Collection – Holly Lattice Frame – CED3125

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cuttlebug, PinkFresh Glitter Drops – Lagoon, Dress It Up – Holiday Colllection – It’s Cold Outside, Dress It Up – Holiday Collection – Itty Bitty Snowflakes, UNIPosca PC-3M White marker, Wink of Stella – Clear

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E47, E44, E43, E42

Dress: BG09, BG05, BG02, BG01

Wings: BG0000, BG000, BV0000, Y00

Wreath: G99, G29, G28, G24, G21, YG67, YG17, R59, R39, R37

Candle: RV14, RV13, RV11, YR12, Y08, R24

Sky: B05, B04, B02, B01

Shadows in Snow: BV20, B0000, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Snow Kisses!!

Oct18

It’s Wednesday, and this week, I made a snow lady Christmas card using High Hopes Rubber Stamps Snow Kisses – TT059 for the main image and Holly Jolly – K048 for the sentiment. I’ve always loved snow people and birds and this stamp combo makes me smile because it has both.

To make my card this week, I began with a card base of AC Cardstock – White, cut and scored to be 6″ x 6″. I cut 2 strips of Doodlebug Design Inc. – Winter Wonderland coloured snowflake pattern to the size of 6″ x .75″. 2 strips of Doodlebug Design Inc. – Spring Solid Assortment paper to the size of 6″ x .25″ and 1 strip of Forever In Time – Textura Sky cut to the size of 6″ x 4″. With Tim Holtz Distress Ink – Evergreen Bough and a blending brush, I inked around all of the edges of the larger pieces. I ran all of the smaller pieces through my Xyron Create a Sticker. The pieces were then attached to the base card from top to bottom. I used liquid glue to attach the larger piece. I trimmed around the 3 sides of the card with a paper trimmer to make it all even.

For the frame around the image, using my Couture Creations – Go Power and Emboss die cutting machine, I die cut the entire frame with Doodlebug Design Inc. – Winter Wonderland paper and Penny Black – Graceful Stackers dies. 2 dies were pieced together for the pink frame using my cutting device and Forever In Time – Textura Blush cardstock. Lastly, I stamped the image with Memento – Summer Sky ink onto Lawn Fawn – Sparkle Cardstock in “Pixie Dust” using my MISTI. I took this piece and ran it through my Couture Creations – Go Power and Emboss die cutting machine again so that it would fit snug into the frame. I cut off the remainder following the stamped snow along the top and inked it with the Memento – Summer Sky ink. Using liquid glue, I applied the pink frame over top of the snowflake die cut while carefully matching up the edges. Liquid glue was applied to the lower back of the snow piece and it was attached to the snowflake background inside the frame.

The image was stamped onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. After colouring the images, I fussy cut around all of them and then with a black marker, inked around all of the edges. I popped up the snowlady using U-Line double-sided tape and attached her to the card under the snow. The little bird was also popped up using U-Line double-sided tape and some liquid glue. Using Copic B41, I added in some shadows in the snow and Stickles – Hibiscus was applied to the scarf and pompom to give them some extra sparkle.

The sentiment was stamped onto Doodlebug Design Inc. – Spring Solid Assortment using my MISTI and Versamark ink. Ranger Embossing Powder White – Extra Fine Detail was applied and then heat embossed using a Marvy Uchida – Embossing Heat Tool. Using my Cuttlebug and My Creative Time – More Stitched Circles, I die cut the sentiment. The edges were inked around using a finger dauber and Tim Holtz Distress Ink – Evergreen Bough. The snowflake was cut using my Cuttlebug, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” cardstock and die from Recollections – Christmas Snowflakes Clear Stamp & Die set. I popped up both the sentiment and snowflake using U-Line double-sided tape onto the card. Lastly, I added 3 Doodlebug Designs Inc. – Sprinkles onto the frame to finish it off.

Card Recipe:

Stamps: Snow Kisses – TT059 (High Hopes Rubber Stamps)

Sentiment: Holly Jolly – K048 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Versamark, Memento – Summer Sky

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Doodlebug Design Inc. – Winter Wonderland (6″ x 6″), Doodlebug Design Inc. – Spring Solid Assortment (12″ x 12″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Forever In Time – Textura Sky, Forever In Time – Textura Blush

Die Cuts: Penny Black – Graceful Stackers (51-658), My Creative Time – More Stitched Circles MCT-D136, Recollections – Christmas Snowflakes Clear Stamp & Die 529291

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Stickles – Hibiscus, Cuttlebug, Blending Brush, Doodlebug Designs Inc. – Sprinkles, Xyron Create a Sticker, Couture Creations – Go Power and Emboss, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Snow Lady: BV20, C00, Colorless Blender, YR18, YR12, YR07, YR04, R29, R27, R24, Eyes (Sakura Glaze – Black), Stickles – Hibiscus

Mitt’s, Coat and Hat: BG72, BG57, BG32, BG13, BG11

Scarf and Trim: RV69, RV09, RV06, RV04, RV02

Birds and Earmuffs: B97, B95, B93, B91, R46, R14, R08, YR12, YR07, YR04, R85, R83, R81, RV55, RV17, RV14, BV02, BV01, BV00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.