Tag Archive | Ranger Embossing Powder White – Extra Fine Detail.

Drummer Boy!!!


It’s Wednesday, and this week, I made a card using Drummer & Friends – RDG005 by High Hopes Rubber Stamps for the main image and Pa Rum Pa Pum Pum – H090 (High Hopes Rubber Stamps) for the sentiment. This is the start of a new month and we’re celebrating the Christmas Cheer release for the month of September at High Hopes.

To make my card this week, I began with a card base of AC Cardstock – White cut and scored to be 6″ x 6″. I cut the background paper from Heartfelt Creations – Festive Winterscapes Collection – Sheet 9A paper to be the same size as the base and inked around the edges using Tim Holtz Distress Ink – Chipped Sapphire. I applied this directly to the base card using double-sided tape. The sentiment was then stamped onto the background paper using Versamark Ink and heat embossed using my Marvy Uchida – Embossing Heat Tool and Ranger Embossing Powder White – Extra Fine Detail.

The image was stamped using my MISTI and Memento – Tuxedo Black ink. I coloured in the image with Copic markers.  I fussy cut around it and then inked the edges with a black marker. I popped it up onto the background using 3M double-sided tape. I inked under the image with C2 copic marker to create a shadow and finish off the card.

Card Recipe:

Stamp: Drummer & Friends – RDG005 (High Hopes Rubber Stamps)

Sentiment: Pa Rum Pa Pum Pum – H090 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Chipped Sapphire, Versamark

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Heartfelt Creations – Festive Winterscapes Collection – Sheet 9A

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, 3M – 2 sided tape, Sakura Glaze – Black, Pen Gelly Roll Sakura #5 Pen, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Eyes and Small Noses for all: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen

Skin: E21, E11, E00, E000, R30, R20

Hair: E47, E44, E43

Robe and Hat: E55, E53, E51, B95, B93, B91, YG67, YG63, YG61

Lamb: B60, C3, C2, C1, C00

Camel: E44, E43, E42, E41

Horse: E29, E27, E25, E23, E21

Cow: C7, C5, C3, C1, C00, R59, R37, R35, R30, R22, R02, R00, E53, E51, E50, E31, E30, E15, Y38, Y17, Y08, Colorless Blender

Drum, Drumsticks and Rope: E53, E51, E50, E15, Y38, Y23, Y21, Y19, Y17, Y15, Y08, Y02, R59, R37, R35

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

There’s A Nap For That!!


Sharing a birthday card that I made for my husband using Art Impressions – Lazy Boy Set – Ai4159 and Stampin’ Up – Country Club Designer Series Paper for the golf player background. I’ve taken a few pictures over the years of my hubby in this exact position and couldn’t resist this stamp when I saw it. He laughed as soon as he saw the card and said it looked just like him too. LOL!

 

To make the card, I began with the base of 5″ x 5″ Hammermill – Premium Colour cardstock. Using my MISTI and Memento – Tuxedo Black ink, the image was stamped onto Copic Marker X-Press It Blending Cardstock and coloured in with Copic Markers. I coloured in the backgound picture with Zig Clean Color Real Brush Markers. I stamped the sentiment using Versamark ink and Ranger Embossing Powder White – Extra Fine Detail onto American Crafts – “Holiday” paper. Marvy Uchida – Embossing Heat Tool was used to heat the embossing powder.

The card was now ready for assembly. I cut some light brown cardstock to the size of 5″ x 3.75″ and attached it directly to the base. I cut the background picture to the size of 3-3/8″ x 2-7/8″ and cut some dark brown cardstock to the size of 3-5/8″ x 3″ and used double-sided tape to attach them both together and to the base card. The flooring background with the sentiment was cut to 5″ x 1″ and attached using double-sided tape to the bottom of the card. Lastly, I added 3M double-sided tape to the back of the image after fussy cutting around it and attached it to the card.

Card Recipe:

Stamp and Sentiments: Lazy Boy Set – Ai4159 – Art Impressions

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., American Crafts – “Holiday” 6 x 6 in. (15.2 cm x 15.2 cm), Stampin’ Up – Country Club Designer Series Paper (12″ x 12″), Light brown cardstock, Dark brown cardstock

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: Marvy Uchida – Embossing Heat Tool, 3M double-sided tape, MISTI – Most Incredible Stamping Tool

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20, C1

Hair: E47, E44, E43

Shirt: E93, E18, E09, E08, E07

Shoes: E34, E33, E31, E27, E25, E23

Track Pants: T7, T5, T3, T1

Chair: B29, B28, B24, B23, E27, E25, E23

Remote: C7, C5, C4, C3, C1, Y04, YG03, R24

Chip Bag: B00, B000, B000, Y17, Y15, Y02

Shadow: C2

Image coloured with Zig Clean Color Real Brush Markers:

Sky: 303

Trees and Grass: 066, 053, 049, 048, 047, 045, 044, 041

Water: 037, 036, 032

Pants: 095, 097, 092

Golf Club: 091

Shirt and Hat: 042, 033

Skin: 069, 076, 071

Shoes and Hair: 066

Hope you like it and have a great week!

Sorry You’re Hurting!!


Sharing a card I made using Clearly Whimsy Stamps – Get Well Dragons – DP1034 for a colleague that had a knee operation recently. I wanted to make a fun card to cheer him up a bit and thought this was the perfect image to make it happen.

To make the card, I stamped the image onto Copic Marker X-Press It Blending Card using Memento – Tuxedo Black ink and my MISTI. I coloured in the image using Copic markers and then fussy cut around it leaving a thin white border. I stamped all of the sentiments onto black cardstock using Versamark ink and Ranger Embossing Powder White – Extra Fine Detail powder. The embossing powders were all heated with Marvy Uchida – Embossing Heat Tool. The smaller sentiments were all die cut using my Cuttlebug and Hero Arts – Infinity Die Ovals. For the background, I used my Cuttlebug and Sizzix Rounded Tags dies to die cut the background paper – Asuka Studio – Sparkly Sky and black cardstock. I die cut the grass using Lawn Fawn – Stitched Hillside Borders and Sizzix Rounded Tags. I inked the top border of the grass with Tim Holtz Distress Inks – Peeled Paint.

The card was now ready to assemble. I started with a base card of 5.5″ x 4.5″ using Hammermill – Premium Colour cardstock. I applied double-sided tape to the back of the black die cut, The patterned paper and the grass cut and applied them all directly to the card. I ran 2 of the “Ouch!” die cuts through my Xyron Create a Sticker and attached them to the top of the card.  Using 3M VHB – 2 sided tape, I popped up the image and 2 other sentiments to finish off the card.

Card Recipe:

Stamp and Sentiments: Get Well Dragons – DP1034 – Clearly Whimsy Stamps

Inks: Memento – Tuxedo Black, Versamark, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Green Cardstock, Black Cardstock, Asuka Studio – Sparkly Sky (6″x6″)

Die Cut: Sizzix Rounded Tags – 8 dies, Lawn Fawn – Stitched Hillside Borders, Hero Arts – Infinity Die Ovals

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool, MISTI – Most Incredible Stamping Tool, Xyron Create a Sticker

Image coloured with Copic Markers:

Dragon: YG67, YG63, YG61, YG05, YG03, YG01, YG00, R59, R39, R27, R22, G14, G12, G07, BV04, BV02, BV01, Y38, Y17, Y08

Bandages: E55, E53, E51, E50, C2, C1, C00, Colorless Blender

Crutches: E25, E23, C2, C1

Hope you like it and have a great week!

Merry and Bright!!


Today, I’m sharing a light up Christmas card using Dreamerland Crafts stamps called Lets Decorate Our Home – D18037 and for the sentiment Holiday Sentiments Set 003. It’s never too early to start making Christmas cards and here’s hoping that this card will brightens someone’s day this coming Christmas.

To make this card I used a base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. For the background paper, I used my Cuttlebug and My Creative Time – Rectangle Frame Dies to die cut American Crafts – “Holiday” paper. The edges were inked with Tim Holtz Distress Inks – Peacock Feathers and then I adhered the background to the base card using double-sided tape. Using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto Copic Marker X-Press It Blending Card and coloured it in with Copic markers. I added some Stickles – Diamond to the pompom on the hat and fur at the top of the little girl’s boots. For the fluffy snow, I used Cosmic Shimmer Fluffy Stuff and sprinkled on some DecoArt Glamour Dust while it was still wet. Using my Marvy Heat Embossing Tool, I heated up the liquid for it to puff up and look like sparkling snow. I poked holes in the card where I wanted the blue lights to go. I applied some tissue paper over the holes on the back of the image to diffuse the lights. Using Versamark ink and my MISTI, I stamped the sentiment and then applied Ranger Embossing Powder White – Extra Fine Detail. This too was heated with my Marvy Heat Embossing Tool. Lastly, added some snowflakes using a Gelly Roll Sakura #10 Pen. I then set the coloured image aside.

It was now time to set up the bright blue lights for the house using Chibi Lights, copper tape and a battery. I cut out an another rectangle slightly smaller than the coloured image. Placing the coloured image over top of the smaller rectangle, I used a pencil for the placement of the lights on the roof. For the placement of the battery, I used the remote in the girl’s hands as a guide. After mapping out the route for the lights, I place the copper tape down and added 3 blue Chibi Lights to the “+” and “-” paths leading back to the battery. The set up was tested to make sure the lights would come on. Once this was completed, I used 3 layers of 3M VHB – 2 sided tape around the 3 sides of the battery to pop the image up high enough off of the card so that the battery would only light up the lights when someone pressed down on it. To keep the card even all the way around, I added 3 layers of 3M VHB – 2 sided tape to the remainder of the smaller rectangle. The image was then attached to the smaller rectangle. I added some double-sided tape to the back of the smaller rectangle and adhered it directly to the card to finish it off.

Card Recipe:

Stamp: Lets Decorate Our Home – D18037 – Dreamerland Crafts

Sentiment: Holiday Sentiments Set 003 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Peacock Feathers, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., American Crafts – “Holiday” 6″ x 6″ (15.2 x 15.2 cm)

Die Cuts: My Creative Time – Rectangle Frame Dies

Stickles: Diamond

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Forever in Time – Pop-Dot Tape, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust, Marvy Heat Embossing Tool, Sakura Glaze – Black, Gelly Roll Sakura #10 Pen, Chibi Lights

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20 (Eyes – Sakura Glaze – Black)

Hair: E47, E44, E43

Hat, Scarf and Boots: BG72, BG57, BG32, BG11

Coat: R59, R37, R35

Pants and Boot Soles: E25

Dog: E27, E25, E23 (Eyes and Nose – Sakura Glaze – Black)

Rabbit: E35, E33, E31 (Eyes and Nose – Sakura Glaze – Black)

House: E57, E55, E53, Y06, Y02

Roof: C5, C4, C3, C2, C1

Lights: Y17, Y02, B000

Snow: B60, B000, B0000, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust

Sky: B99, B97, B95

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Miss You!!


Today, I’m sharing a slim-line card that I made using Dreamerland Crafts stamps called Meow Meow 04 – D20016 for the main image and for the sentiment Just A Note To Say – DCS17038Dreamerland Crafts. Love this new set and I as soon as I saw it, I knew I wanted to make a card to show how a lot of us are feeling right now during these Covid times missing family and friends.

To make this card I used a base card of 7″ x 8.25″ using Hammermill – Premium Colour 100 lb. cardstock. I scored it at 3.25″.  Next, using my Couture Creations – Go Power and Emboss and Whimsy Stamps – Slimline Marquee Die, I die cut Copic Marker X-Press It Blending Card.  Using my MISTI and Memento – Tuxedo Black ink, I stamped all of the images onto the shaped die cuts and coloured them in with Copic markers.

The frame die cut was coloured using Picket Fence Studio Blender Brush and Tim Holtz Distress Inks: Picked Raspberry, Spun Sugar and Worn Lipstick. The sentiments were stamped and embossed onto black cardstock using Versamark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat set using Marvy Uchida – Embossing Heat Tool. My cutter was used to cut the stamped sentiments into small strips. 3M VHB – 2 sided tape was applied to the back of each of the sentiments.

To assemble the card, I first turned the die cuts upside down and used a little bit of Scotch Tape on the back side to keep the inserts in place. Then, I applied double-sided tape across the entire back and attached it directly to the card base. I attached each of the sentiments and finished off the card with Crafts – Rhinestone Stickers.

Card Recipe:

Stamps: Meow Meow 04 – D20016 – Dreamerland Crafts

Sentiments: Just A Note To Say – DCS17038 – Dreamerland Crafts, Love and Cuddles – Penny Black

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Tim Holtz Distress Ink – Spun Sugar, Tim Holtz Distress Ink -Worn Lipstick, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: Whimsy Stamps – Slimline Marquee Die (WSD347)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Couture Creations – Go Power and Emboss, Picket Fence Studio Blender Brushes, Marvy Uchida – Embossing Heat Tool, Crafts – Rhinestone Stickers – 02-3048783

Image coloured with Copic Markers:

Cats: C7, C5, C3, R30, R22, R20, 100, YG23, YG17, G07 (Noses – Sakura Glaze – Black)

Bunny:  E35, E33, E31

Grass: YG17, YG13, YG03, YG01

Sky: B02, B01, B00, B000

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Dam Good Birthday!


Sharing a card I made for my younger brother’s birthday. He sometimes likes to use “choice” words, so I couldn’t resist  these little characters and sentiment from Whimsy Stamps called Beaver Birthday Clear Stamps. LOL! The little tree stump and stacked logs are from Your Next Stamp – Autumn Animals (CYNS605) and the larger log is from Craftin Desert Diva’s – Build A Scene (Retired).

To make this card, I first stamped all of the images onto Copic Marker X-Press It Blending Card using Memento – Tuxedo Black and my MISTI.  My Brother Scan and Cut was used to cut around all of the images, which were then coloured with copic markers. The sentiment was stamped with VersaMark ink and then heat embossed with Ranger Embossing Powder White – Extra Fine Detail and Marvy Uchida – Embossing Heat Tool.

The base card was created using Hammermill – Premium Colour 100 lb. cardstock folded to the size of 8-1/4″ x 3-1/4″. To create the clouds in the background, I used the same paper cut to the same size as the base and using a template that I had previously created using Whimsy Stamps – Grass and Cloud Edger Die Set and Tim Holtz Distress Oxide Inks – Broken China and Blueprint Sketch. For the slim-line die cut, I used Whimsy Stamps – Slimline Wave Dies and Craftsmart Hot Buy – Christmas Embossed paper. Then I inked around the entire die cut with Tim Holtz Distress Ink – Tea Dye to make it pop more. The tree along the left side and the long log along the bottom were drawn free hand and then coloured in with Copic markers.

To assemble the card, I first attached the cloudy background to the base of the card using double-sided tape. Next, I attached the slim-line die cut using some glue. The large tree, long log and small log pile were all attached using glue. The remainder of the images and sentiment were all attached using 3M VHB – 2 sided tape. I added some twine to the balloons and beaver to finish it off.

Card Recipe:

Stamp and Sentiments: Whimsy Stamps – Beaver Birthday (KHB157), Your Next Stamp – Autumn Animals (CYNS605), Craftin Desert Divas – Build A Scene (Retired)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Tea Dye, Tim Holtz Distress Ink – Gathered Twigs, Tim Holtz Distress Oxide Ink – Broken China, Tim Holtz Distress Oxide Ink – Blueprint Sketch

Paper: Copic Marker X-Press It Blending Card, Craftsmart Hot Buy – Christmas Embossed, Hammermill – Premium Colour 100 lb.

Die Cuts: Whimsy Stamps – Slimline Wave Dies, Whimsy Stamps – Grass and Cloud Edger Die Set

Tools: MISTI – Most Incredible Stamping Tool, Couture Creations – Go Power and Emboss, 3M VHB – 2 sided tape, AC Premium Ribbon, Tombow – Multi Mono Liquid Glue

Beavers: E99, E97, E37, E35, E34, E33, E29, E25, E15, E09, E08, R30, R20

Balloons: B06, B04, B02, B00, G09, G07, G02, G00

Cake and Candle: YR19, Y08, R24, B28, B24, B14, B12, B04, B02, AtyouSpica: Skyblue (09), Baby Blue (18)

Logs and Stump: E49, E27, E25, E23, E21

Tree and Log along the bottom: E37, E35, E33, Tim Holtz Distress Ink – Gathered Twigs

Hope you like it and have a great week!

Happiness


Hi Everyone! It’s the new year and it’s never too early to start making your Christmas cards. Today, I’m featuring a Christmas card from Dreamerland Crafts new Christmas release called Happiness Is Time Spent With A Good Friend – D20009.

To create this card, I first stamped my images using my MISTI and Memento – Tuxedo Black ink.  The images were coloured in with Copic markers. Then I fussy cut around them and went around the edges with a black marker and set them aside.

Next, I worked on the background. I cut Hammermill – Premium Colour 100 lb. to the size of 4.25″ x 5.5″. I created the sky using the Tim Holtz inks listed below and then added in some snow using Stamperi – Glamour Paste – Sparkling White and sprinkling on some Martha Stewart Crafts – Crystal Fine Glitter while it was still wet. I then set this aside to dry. Once the paste was dry, I stamped the sentiment using VersaMark ink. The sentiment was embossed with Ranger Embossing Powder White – Extra Fine Detail and Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

The bench was die cut using Joy Crafts – Floral Flourishes – 6002/0191, my Cutttlebug and Tim Holtz – Idea-ology – Christmas paper. Shadows were added in using T5 Copic Marker. I created a base card using Hammermill – Premium Colour 100 lb. to the size of 4.25″ x 5.5″. I added double-sided tape to the coloured background and adhered it directly to the base. Using double-sided tape, I added the bench to the background. I popped up the images on the bench using 3M VHB – 2 sided tape. The snow and stars were added in using a combination of Gelly Roll Sakura #8 Pen and Gelly Roll Sakura #10 Pen. Sequins was added from some mixed sparkles I had.

To finish off the card, I added in some Cosmic Shimmer – Fluffy Puff around the bottom of each of the legs of the bench and also onto the trim of the girl’s cape, kitten’s cape and pompom. Lastly, I added some Stickles – Diamond onto the snow and the girl’s cape for added texture.

Card Recipe:

Stamp and Sentiment:  Happiness Is Time Spent With A Good Friend – D20009 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink: Black Soot, Blueprint Sketch, Chipped Sapphire, Salty Ocean, Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Tim Holtz – Idea-ology – Christmas

Glitter \ Snow: Stamperi – Glamour Paste – Sparkling White, Stickles – Diamond, Cosmic Shimmer – Fluffy Puff

Die Cuts: Joy Crafts – Floral Flourishes – 6002/0191

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #10 Pen, 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000, R22, R20, Eyes – Sakura Glaze – Black, Gelly Roll Sakura #8 Pen

Hair: E47, E44, E43

Cape and Dresses:  BG72, BG57, BG34, BG11

Pants: T7, T5, T4, T3

Boots: E55, E50, E29, E27, E25, E23

Kitty: T7, T5, T3, R20, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen

Hat and Antlers: C2, R39, R37, R35

Sky: Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #8 Pen,

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Wish You A Merry Christmas


Today, I’m featuring a Christmas card from Dreamerland Crafts new Christmas release called We Wish You A Merry Christmas – D20012. This card features a little kitten helping his friend celebrate the joy of Christmas giving.

To create this card, I first die-cut some Copic Marker X-Press It Blending Card using my Cuttlebug and Creative Expressions – Festive Frames – Snowball. I separated the 2 pieces of the die-cut and using my MISTI and Memento – Tuxedo Black, I stamped the image onto the paper and  coloured it in with Copic markers. I stamped the sentiment using VersaMark ink. The sentiment was then embossed with Ranger Embossing Powder White – Extra Fine Detail and Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder. Once this was done, I added all of the snowflakes in the sky using a Gelly Roll Sakura #10 Pen and also Gelly Roll Sakura #8 Pen. For the snow on the ground, I used a mixture of Nuvo Glitter Accents – Fresh Snowfall and Stickles – Crystal. This was then set aside for a few hours to dry.

For the frame, I used Cosmic Shimmer Opal Polish – Summer Sky. It was my first time using this polish and I just love how it turned out. Once the snow on the image was dry, I flipped the 2 die-cuts over and attached them back together using some clear tape on the back.

The card was now ready to assemble. For the card base I used The Paper Studio – Primary Base Colours 4.25″ x 5.5″. I added some double-sided tape and some glue to the backing of the finished frame and image and attached it directly to the card base.

Card Recipe:

Stamp and Sentiment:  We Wish You A Merry Christmas – D20012 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, The Paper Studio – Primary Base Colours 4.25″ x 5.5″

Opal Polish: Cosmic Shimmer – Summer Sky

Glitter \ Snow: Nuvo Glitter Accents – Fresh Snowfall, Stickles – Crystal

Die Cuts: Creative Expressions – Festive Frames – Snowball – CED3146

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #8 Pen, 3M VHB – 2 sided tape, Cuttlebug, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000, R22, R20, Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Hair: E15, Y38, Y21, YR23

Hat, Cape and Coat:  G29, YG17, YG05, YG03, BV20, C1, C0

Pants: B26, B23, B21

Boots: E53, E51, E50, E29, E27, E25, E23

Present: R14, R13, R11

Bow and Girl’s Scarf: R59, R39, R37, R35

Kitten and Scarf: N10, N8, N6, N4, N3, G29, YG17, YG05, YG03, R32, R20, Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Present: Y17, Y15, Y08, Y04, Y17, Y15, Y13

Stars: Y17, Y15, Y13

Sky: B99, B97, B79, B69, B39, B37, B34, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #8 Pen

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Sending You Tidings


Today, I’m featuring a Christmas card by Dreamerland Crafts using their stamp set called Sending You Tidings – D19072. Growing up in the North, we used to get a lot of snow. I always love looking out the window and seeing the snow fall and how beautiful it looks on the houses and trees. Driving in it, not so much, but everything else about winter, I love. LOL!

To make this card, I cut some Copic Marker X-Press It Blending Card to the size of 4.75″ x 3.5″ using my Cuttlebug and My Creative Time – Rectangle Frame Layers Dies. Then using my MISTI and Memento – Tuxedo Black, I stamped the image first onto the paper and then again on to Post-It Note to create a mask. I fussy cut around the mask and placed it to the side to use a little later. I then proceeded to colour in my image with Copic markers.

Once the colouring of the image was complete, I was ready to create the sky. To accomplish this, the mask that I had set aside earlier was placed over top of the coloured image. A mixture of Tim Holtz Distress Inks were then used: Black Soot, Chipped Sapphire, Blueprint Sketch and Dusty Concord inks. Once, the background was completed, I stamped the sentiment from the same stamp set using my MISTI and VersaMark ink. The sentiment was then embossed with Ranger Embossing Powder White – Extra Fine Detail and Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

I was now ready to add the final finishing touches. To do this, I added in the snowflakes and stars using Gelly Roll Sakura #10, #8 and #5 Pens. Stickles – Cool Mint was added to the little lady’s hat, pom-pom and coat cuffs. Gina K Designs – Glitz Glitter Gel was applied with a spatula along the bottom of the card to create some sparkling snow and also to the top of the chimney with a Q-Tip. I also coloured in the little snowflake in the sky with Gelly Roll Sakura #10 pen and then Gelly Roll Stardust – Clear to make it sparkle. I set the card aside to let the glitter dry for a few hours.

For the card base I used Recollections – Winter 4.25″ x 5.5 and edged around all of the sides with Tim Holtz Distress Ink – Iced Spruce. I die cut Hot Buy Craft Smart – Holiday Glitz Glitter Paper to the size 3.75″ x 5″ using My Creative Time – Rectangle Frame Dies and Cuttlebug. This was adhered directly onto the base using 3M VHB – 2 sided tape. Once the glitter was completely dry, I layered the completed image on top of the second layer using 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment:  Sending You Tidings – D19072 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Ink – Chipped Sapphire, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Inks – Dusty Concord, Tim Holtz Distress Ink – Iced Spruce

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Recollections – Winter 4.25″ x 5.5″ (Assorted Box of Cards)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Die Cuts: My Creative Time – Rectangle Frame Die Layers – MCT-D274, My Creative Time – Rectangle Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Stickles – Cool Mint, Gelly Roll Sakura #8 Pen, 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000, R22, R20, Eyes – Sakura Glaze – Black

Hair: E47, E44, E43

Hat, Jacket, Mitts, Bear’s Scarf:  BG49, BG15, BG13, BG11, Stickles – Cool Mint

Leggings: C7, C5

Boots: E27, E25, E23, E21

Bear: E35, E34, E33, E31, E30, R22, R20, Eyes and Noses – Sakura Glaze – Black

Bow and Girl’s Scarf: R59, R39, R37, R35

Present: Y17, Y15, Y08, Y04

Chimney: E99, E97, E08, E07, E13, C4, C2

Snow: Gina K Designs – Glitz Glitter Gel, Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #5 Pen

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Santa in the Chimney!!!


It’s Wednesday, and this week I’m sharing a Christmas card featuring Santa in Chimney – S202 from (High Hopes Rubber Stamps) paired with the sentiment Bold – From One Flake – K201 (High Hopes Rubber Stamps). December is almost here and Santa is on his way to deliver all of the goodies to everyone. Hope your not on the naughty list. LOL!

To create the card this week, I stamped the main image and then coloured it in with Copic Markers. I stamped the image again and used it as a mask. I have a magnetic cutting mat, so I just used a very strong magnet to hold the mask down. Then I used multiple Tim Holtz Distress Inks to create the sky.

Once the sky was created, I removed the mask and used My Creative Time – Rectangle Frame to die cut the image. I added the sentiment using the top half of the sentiment stamp only. To do this, using my MISTI to get a good clean stamped image, I used VersaMark Ink and then embossed it with Ranger Embossing Powder White – Extra Fine Detail. This was then heated using Marvy Uchida – Embossing Heat Tool.

To finish off my background, I added in some snowflakes and stars using Gelly Roll Sakura #10 Pen and Gelly Roll Sakura #5 Pen. For the eyes and notches on the belt, Sakura Glaze – Black ink was used. For the snow on the roof top, Gina K Designs – Glitz Glitter Gel was applied with a little sprinkle of Martha Stewart Crafts – Crystal Fine Glitter. Stickles was added to the hat, collar and cuffs of Santa’s outfit.

To create the layers, I first die cut Hot Buy Craft Smart – Holiday Glitz Glitter Paper with My Creative Time – Rectangle Frame Layers and then the dark blue panel with My Creative Time – Rectangle Frame dies. For the card, I used Hammermill – Premium Colour 100 lb. paper, which was cut at 8.5″ x 5.5″ and then scored at 4.25″ and to create a base card of 4.25″ x 5.5″.

To assemble the remainder of the card. I placed the dark blue layer directly to the base using double-sided tape. The silver layer was applied the same way. The coloured image was then popped up using 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Santa in Chimney – S202 (High Hopes Rubber Stamps)

Sentiment: Bold – From One Flake – K201 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Black Soot, Dusty Concord, Blueprint Sketch and Chipped Sapphire, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Dark Blue Cardstock, Hammermill – Premium Colour 100 lb.

Die Cuts: My Creative Time – Rectangle Frame Layers, My Creative Time – Rectangle Frame Dies

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Glitter: Martha Stewart Crafts – Crystal Fine Glitter, Gina K Designs – Glitz Glitter Gel, Stickles

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R21, R20

Hair: W3, W2, W1, W00

Hat and Outfit: R59, R39, R37, R35

Belt: C9, C7, C5, C4, E15, YR24, Y35, Y08

Mitts: C9, C7, C4

Sack: G94, G28, G09, G07, G05, YG67, YG63, YG61

Chimney: E99, E97, E13, E08, T5, T3, T1

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Winter Wonderland


Sharing a card I made from the Kit and Clowder October 2020 Markers Class called “Winter Wonderland”. I really love snow and nature and this class combined both of those loves for me. The class challenged me in a lot of ways, but I am so happy with the final results. I decided to turn this finished image into a Christmas card.

Alyce is such a wonderful instructor as she takes you through chapter by chapter breaking down everything and she is very easy to follow. I am sure that I will be doing this class a few more times. One for more practice and two because I LOVE this image so much! LOL!

To complete the card, I ran the image through my Xyron Creative Station to change it into a sticker as I wanted it lay completely flat on the black cardstock that I was adhering it to. I stamped out the sentiment using the stamp from Rosewood Frog’s Whiskers Ink called May Your Christmas – G1089 with VersaMark ink and then used Ranger Embossing Powder White – Extra Fine Detail. This was then heated with my Marvy Uchida – Embossing Heat Tool. I just thought this sentiment went so well with the image.

I cut some AC White Cardstock and scored it to be 6″ x 6″. Then I added some glue to the back panel of my image and mounted it directly to the base. I used 3M VHB – 2 sided tape to pop up the sentiment and then added some embellishments to complete the card.

Card Recipe:

Stamp: Deer Scene – Kit and Clowder Class (LeeHollandArt)

Sentiments: May Your Christmas – G1089 (Rosewood Frog’s Whiskers Ink)

Class Videos: Kit and Clowder October 2020 Markers Class called “Winter Wonderland”

Hope you like it and have a great week!

Wishing You The Best


Today, I’m featuring a Christmas card by Dreamerland Crafts using their stamp set called Wishing You and Your Family – D19069. I decided to make the scene a snowy night, because when we were little, we used to go at dusk to pick up out our new tree. It was always so much fun!

 

To make this card, I cut some Copic Marker X-Press It Blending Card to the size of 5.5″ x 4.25″. Then using my MISTI and Memento – Tuxedo Black, I stamped the image first onto the paper and then again on to Post-It Note to create a mask. I fussy cut around the mask and placed it over top of the main image. To create my background I used Tim Holtz Distress Ink – Black Soot, Chipped Sapphire, Blueprint Sketch and Dusty Concord inks. Once they were all blended and I was satisfied with the look, I spritzed some water on top and then placed some paper towel over top to pick up some of the droplets.

I removed the mask and proceeded to colour in the main image with Copic markers. I stamped the sentiment from the same stamp set using my MISTI and VersaMark ink. The sentiment was then embossed with Ranger Embossing Powder White – Extra Fine Detail and Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

I was now ready to add the final finishing touches. To do this, I added in the snowflakes and stars using Gelly Roll Sakura #8 Pen and Stickles – Cool Mint to the little lady’s hat and scarf. Gina K Designs – Glitz Glitter Gel was applied with a spatula along the bottom of the card to create some sparkling snow. I set the card aside to let the glitter dry for a few hours.

Once everything was dry, I attached it to a white base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. paper with double-sided tape.

Card Recipe:

Stamp and Sentiment:  Wishing You and Your Family – D19069 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Ink – Chipped Sapphire, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Inks – Dusty Concord

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Embossing Powder:  Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Stickles – Cool Mint, Gelly Roll Sakura #8 Pen

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000, Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Hair: E47, E44, E43

Jacket, Scarf and Mitts:  BG49, BG18, BG15, Stickles – Cool Mint

Car and Wheels: C10, C6, C8, C3, C1, C0, C00, R59, R39, R37, R35, R17, R14

Bears: E35, E34, E33, E31, E29, E27, E25, E23, Eyes and Noses – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Bear’s Hat: R39, R37, R35, Gelly Roll Stardust – Clear

Tree and Star: G99, YG67, YG17, G21, W15, YR24, Y35, Y08

Background Inside Car: B66

Snow: Gina K Designs – Glitz Glitter Gel, Gelly Roll Sakura #8 Pen

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Give Thanks!!


Sharing a card I made for my October Kraftin’ Kimmie Pen Pal using It’s Turkey Day by Kraftin’ Kimmie Stamps! For the sentiment I used Pumpkin Kisses (Kraftin’ Kimmie Stamps) and It’s Turkey Day (Kraftin’ Kimmie Stamps).

 

 

I thought it would be fun to create this card as an accordian card. To achieve this, I used Elizabeth Craft Designs – Accordian Oval Card dies. I die cut several patterned papers and attached them to the AC Cardstock – Autumn base card for extra support. All of the edges were inked with Kraftin’ Kimmie – Crisp Crimson for the centre ovals, Kraftin’ Kimmie – Tempting Tangerine for everything else.

The images were stamped onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink and then coloured in with copic markers. Both of the sentiments were stamped with VersaMark ink and then embossed with Ranger Embossing Powder White – Extra Fine Detail. The embossing powder was heat set with Marvy Uchida – Embossing Heat Tool.

Card Recipe:

Stamps It’s Turkey Day (Kraftin’ Kimmie Stamps)

Sentiments: Pumpkin Kisses (Kraftin’ Kimmie Stamps), It’s Turkey Day (Kraftin’ Kimmie Stamps)

Inks: Memento – Tuxedo Black, VersaMark ink, Kraftin’ Kimmie – Crisp Crimson, Kraftin’ Kimmie – Tempting Tangerine

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Paper: Copic Marker X-Press It Blending Card, Photoplay – Mad 4 Plaid Fall – 6″ x 6″, AC Cardstock – Autumn, Pebbles – Harvest Paper Pad – 6″ x 6″, Echo Park – Happy Fall 6″ x 6″

Die Cuts: Elizabeth Craft Designs – Accordian Oval Card – 772

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20

Hair: E47, E44, E43

Lady: E08, YR18, YR14, YR12, B04, B02, B00, C9, C7, C5, E87, E84, E81

Man: E87, 84, E81, E43, E42, E41, E15, C9, C7, C5, Y35, Y19, Y08, G05, G03, G00

Turkey: R59, R29, YR16, YR14, YR12, Y38, Y35, Y32, Y15, R02, R000, E25, E23, E21

Pumpkin: E08, YR18, YR14, YR12, E87, E84, E81

Leaves: YR15, R24, YG25, YG05

Background: B04, B02, B00

Hope you like it and have a great week!

Saying Hi!


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing Mix and Match Clear Stamps – DCS 19093 (Dreamerland Crafts) for the images and sentiment that I used to create this little scene. I just love how you can used these little stamps to create a variety of scenes. To colour my card this week, I thought I would try using Zig Clean Color Real Brush Markers. I normally colour with Copic markers, so this was a bit of a challenge for me.

To make this card I used a base card of 4.25″ x 5.5″ by Hot Buy – Recollections – Watercolour Solids. The sentiment was stamped directly onto the background paper using my MISTI, VersaMark ink and Ranger Embossing Powder White – Extra Fine Detail. The powder was then heat embossed with Marvy Uchida – Embossing Heat Tool.

Strathmore – Watercolor Paper – 140 lb. was die cut using my Cuttlebug and dies from My Creative Time -Stitched Squares Inside and Out. For the images, I used my MISTI and Kraftin’ Kimmie – Wicked Black Ink.  I created a mask of the bear’s head using some Post-it Note paper and set it aside. To create the scene it was done in stages. First the bear and the little flower pots were stamped. Then the mask created earlier was put overtop of the little bear as show below. The poles, clothesline and grass were then stamped next.

Lastly, the T-Shirts, birds and clouds were stamped. Once this was completed, the mask for the bear was removed. The images were coloured in with the colour recipe listed below and Sakura Glaze – Black was used for all of the little eyes. Once the colouring was all completed, the finished scene was mounted directly to the base with 2-sided tape. Kraftin’ Kimmie – Lovely Dots were added to put a finishing touch on the card.

Card Recipe:

Stamps and Sentiments:  Mix and Match Clear Stamps – DCS 19093 (Dreamerland Crafts)

Inks: Kraftin’ Kimmie – Wicked Black Ink, VersaMark, Sakura Glaze – Black

Paper: Strathmore – Watercolor Paper – 140 lb., Hot Buy – Recollections – Watercolour Solids

Die Cuts: My Creative Time -Stitched Squares Inside and Out

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, Kraftin’ Kimmie – Lovely Dots

Image coloured with Zig Clean Color Real Brush Markers:

Bear: No. 64 – Oatmeal, No. 61 – Light Brown, No. 201 – Pink Haze, No. 26 – Light Pink

Sky:  No. 31 – Cobalt Blue, No. 36 – Light Blue

Clouds: No. 99 – Cool Gray 1, No. 90 – Gray

Grass: No. 47 – May Green, No. 41 – Light Green

Poles: No. 58 – Deep Brown, No. 62 – Dark Brown, No. 66 – Dark Oatmeal

Flowers: No. 61 – Light Brown, No. 52 – Bright Yellow, No. 55 – Pale Yellow,

Watering Can: No. 090 – Gray

Birds: No. 32 – Persian Blue, No. 30 – Blue

T-Shirts: No. 84 – Deep Violet, No. 83 – Lilac

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Make it Rain!


Sharing a fun birthday card that I made for my husband this week using Make It Rain – CYNS728 (#YourNextStamp) for the main image and sentiment. I thought it would be fun to put the image inside a balloon too! Now if only that could be Lottery Winnings he was holding onto. LOL!

To make my card this week, I started out with a simple lime green card base, sized at 5.5″ x 4.25″.  For the bottom layer I used Hammermill – Premium Colour 100 lb. paper and multiple Tim Holtz inks which I have listed below. Then I die-cut the top layer with my Cuttlebug and #Your Next Stamp – Confetti Panel Die. Hammermill paper was used for this also. I mounted the bottom layer directly onto  the base card and then attached the top die-cut layer using 3M VHB – 2 sided tape.

For both of the sentiments, I used my MISTI, VeraMark ink and Ranger Embossing Powder White – Extra Fine Detail on black cardstock. Then a Marvy Uchida – Embossing Heat Tool was used to heat emboss the powder.

The balloon was die cut using My Creative Time – Stitched Circle Balloon Dies MCT-D137 to cut Copic Marker X-Press It Blending Card which I then stamped the main image onto using Memento – Tuxedo Black ink and my MISTI. The image was coloured with Copic Markers.

To assemble the remainder of the card, the image and sentiment were popped up on top with 3M VHB – 2 sided tape. Some ribbon was tied to the bottom of the balloon and some Kraftin’ Kimmie dots were used.

Card Recipe:

Stamp and Sentiment: Make It Rain – CYNS728 (#YourNextStamp)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Barn Door, Tim Holtz Distress Ink – Carved Pumpkin, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Ink – Mermaid Lagoon, Tim Holtz Distress Ink – Mustard Seed, Tim Holtz Distress Ink – Spiced Marmalade, Tim Holtz Distress Ink – Twisted Citron, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: My Creative Time – Stitched Circle Balloon Dies MCT-D137, My Creative Time – Rectangle Frame Die Layers – MCT-D274Your Next Stamp – Confetti Panel Die – YNSD770

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, American Crafts – Premium Ribbon, Marvy Uchida – Embossing Heat Tool, Kraftin’ Kimmie Dots

Image coloured with Copic Markers:

Dog: E33, E31, E29, E27, E25, E23, R89, R59, R39, R37, R35, R24, C0, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen

Money: G99, G94, G21, G82, YG05, YG04

Balloon: BG09, BG07, BG05, BG000

Hope you like it and have a fantastic week!

 

 

Gnome For the Holidays


It’s Wednesday, and this week, I used Snowy Gnome – TLF024 (High Hopes Rubber Stamps) for the main image from the new August 2020 release and From Our Gnome – GLL001 (High Hopes Rubber Stamps) for the sentiment. This little gnome has gone home for the holidays to celebrate with friends and family. As you can see there are a lot of activities going on in Gnome Town. This little gnome has his snowballs ready for the next snowball fun fight! LOL! While waiting for the other team to get ready, he’s decided to take a little break and enjoy nature with his little cardinal friends. Then, let the fun begin!!!

To make my card this week, I started out with a simple white card base, sized at 6″ x 6″. I cut some dark blue cardstock, just slightly smaller and adhered it to the card with Tombow Mutli-Liquid Glue. I just love this paper from PhotoPlay called Gnome for the Holidays Christmas. I thought it went perfectly with this new stamp. I cut it at about 5.75″ x 5.75″. Then I glued it to the blue paper.

I die cut multiple circles in a variety of sizes using a mixture of My Creative Time – More Stitched Circles and Lifestyle Crafts Cutting Dies – Nesting Circles using dark blue and red cardstock and also Copic Marker X-Press It Blending Card for the main image.

The image was stamped onto the Copic Marker X-Press It Blending Cardstock circle using my MISTI and Memento – Tuxedo Black. It was then coloured it in with Copic markers. For the snow, I used Recollections – Christmas Snow Paste, Martha Stewart Crafts Glitter – Crystal Fine and a spatula and let it dry overnight. Then  Stickles – Diamond was added onto the top of it. For the sky a mixture of 2 Gel pens were used and then a little bit of Stickles – Diamond to add some glitter to it. I was trying to get it to match the background paper. Once the Stickles was dry, I glued the bottom 2 layers of circles together and then the top 2 circles.  Both were done separately. The sentiment was stamped with Versa Mark and then embossed with Ranger Embossing Powder White – Extra Fine Detail and heated with Marvy Uchida Embossing Heat Tool. I fussy cut around the sentiment and glued it directly on top of some red cardstock. Then I cut around that as well.

To complete the card I popped up the bottom circles, top circles with coloured image and sentiment with the 3M VHB – 2 sided tape.

Lastly, I added some more sparkle with Stickles – Diamond by adding it to the base of the card in random places.

Card Recipe:

Stamp: Snowy Gnome – TLF024 (High Hopes Rubber Stamps)

Sentiment: From Our Gnome – GLL001 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Versamark

Paper: Copic Marker X-Press It Blending Card, PhotoPlay – Gnome for the Holidays Christmas, AC White Cardstock Dark Blue Cardstock, Red Cardstock

Die Cuts: My Creative Time – More Stitched Circles MCT-D136, Lifestyle Crafts Cutting Dies – Nesting Circles

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Stickles – Diamond, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20

Beard: W5, W4, W3, W2, W1, W0, W00

Shirt, Hat and Berries: R59, R37, R35, R24, R22, Stickles – Diamond, Gelly Roll Sakura #8 Pen

Pants, Leaves and Mitts: G99, G94, G21, YG03

Shoes: C9, C7, C5

Cardinals and Scarves: R59, R37, R35, R24, R22, C7, C5, C3, YR16, YR12

Snowballs: BV23, BV20, Stickles – Diamond

Sky: B16, B14, B12, Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #10 Pen, Stickles – Diamond

Ground: Recollections – Christmas Snow Paste, Martha Stewart Crafts Glitter – Crystal Fine, Stickles – Diamond

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Day Wrapped in Happiness


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a birthday card that I made using Dreamerland Crafts stamps called You Are A Blessing – D19085 for the main image and  Birthday Sentiments 002 – DS163007. This little girl looks so peaceful sitting on her swing with her sweet companion next to her.

 

To make this card I used a base card of 4.25″ x 5.5″. I die cut a square out of Copic Marker X-Press It Blending Card using my Cuttlebug and My Creative Time – Stitched Squares Inside and Out. Then I stamped the image using Memento – Tuxedo Black ink and my MISTI. I coloured in the image with Copic markers and then drew in the tree, grass, clouds and sky.

I stamped the sentiment using VersaMark ink and my MISTI. I used Ranger Embossing Powder White – Extra Fine Detail and then heat embossed the powder with Marvy Uchida – Embossing Heat Tool. I layered the sentiment onto aqua cardstock and the coloured image onto purple cardstock and then popped up both the image and the sentiment with 3M VHB – 2 sided tape.

Card Recipe:

Stamps:  You Are A Blessing – D19085 (Dreamerland Crafts)

Sentiment: Birthday Sentiments 002 – DS163007 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, VersaMark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Paper: Copic Marker X-Press It Blending Card, White Card Stock, Purple cardstock, Aqua Cardstock

Die Cuts: My Creative Time – Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair:  E47, E44, E43

Dress: V09, V06, V04

Cat: C10, C8, C5

Swing and Tree: E37, E35, E33

Grass and Leaves: YG13, YG11, G24

Sky and Clouds: B01, B00, B000, B000, B60, C0, Colorless Blender

Book: BG13, BG11, C0

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Birthday Girl! We Need To Put the Shades On!


Sharing a birthday card today that I made using Sunny Shades Set – SC4988 (AI Art Impressions) for both the image and sentiment.

To make this card, I used my MISTI to get a nice clean stamped image using Memento – Tuxedo Black and Copic Marker X-Press It Blending Card. Next I die-cut out the stamped image and background papers using my Cuttlebug and My Creative Time – Stitched Squares Inside and Out. I then inked around the edges using Tim Holtz Distress Ink – Picked Raspberry and Tim Holtz Distress Inks – Peacock Feathers.

I mounted the background paper from Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad onto a card base of 5.5″ x 4.25″. Then, I popped up the next layer using 3M VHB – 2 sided tape. I mounted the main coloured image onto some Hotpink cardstock and then cut a narrow edge around it. Lastly, I popped up it up with 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment: Sunny Shades Set – SC4988 (AI Art Impressions)

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Picked Raspberry

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Hotpink cardstock

Die Cuts:  My Creative Time – Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R29, R24, R22, R20

Hair Combos: E47, E44, E43, E18, E08, YR18, YR14, E29, E25, E21, E15, YR23, Y21

Blouses, Earrings and Shoes: BG18, BG13, BG11, Y19, Y15, Y13

Pants: B26, B23, B21

Boots: E27, E25, E23

Blouse 1, Earrings and Shoes:  R89, R85, R83, R81, RV01, RV000

Blouse 2, Earrings and Shoes: Y17, Y15, Y13

Blouse 3, Earrings and Scarf: YR21, YR20, YR16, YR14, YR12

Blouse 4 and Jacket: BG15, BG13, BG11, V09, V06, V04

Glasses: BG05, BG02, BV01, BV00, Gelly Roll Sakura #5 Pen

Background: B04, B02, B01, B00, C2, C1, C0

Hope you like it and have a great week!

I Detect A Birthday!


Sharing a card that I made for my brother this week! For the main image and sentiment, I used It’s A Mystery (Kraftin Kimmie Stamps). My little brother retired from the OPP last year, so I thought this would be a fun card to make for him for his birthday this year.

To make the background for the card, I die cut multiple rectangles using Your Next Stamp – Stitched Rectangle Die Set (YNSD214) in various brown cardstocks and some white Copic Marker X-Press It Blending Cardstock.

For the brick background, I used Darice – Brick Wall Embossing Folder and then various Tim Holtz inks listed below to give the different colours for the texture.

I coloured in the main images with Copic markers and then fussy cut around them leaving a thin white border. I stamped the lamp post using My Creative Time – Wishing You Were Here and then used the co-ordinating die cut to cut it out.

I used Sentiment Label Dies (My Creative Time) to die cut the ribbon and then stamped the sentiment using VersaMark and Ranger Embossing Powder White – Extra Fine Detail. Which I heat set with Marvy Uchida – Embossing Heat Tool. Then I used the YNS die cut to trim off the edge so that it matched the rest of the card.

I layered all of the pieces together using 3M VHB – 2 sided tape to pop them up and then 2-sided tape to mount the final rectangles onto the 5.5″ x 4.25″ card base.

Card Recipe:

Stamp and Sentiment: It’s A Mystery  (Kraftin Kimmie Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Brushed Corduroy, Tim Holtz Distress Ink – Rusty Hinge, Tim Holtz Distress Ink – Vintage Photo, Tim Holtz Distress Ink – Walnut Stain

Paper: Copic Marker X-Press It Blending Card, Park Lane 50 pk 8.5”x11” Value Papers-Browns, AC Cardstock – Autumn

Die Cuts: Your Next Stamp – Stitched Rectangle Die Set (YNSD214), My Creative Time – Wishing You Were Here, Sentiment Label Dies (My Creative Time)

Embossing Folder: Darice – Brick Wall

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Detective: E39, E37, E35, E34, E33, E31, E89, E87, E84

Magnifying Glass: C1

Shadow and Sidewalk: C5, C3, C2, C1

My brother loved his card. I hope you like it too and have a fantastic week!

 

Love Every Little Moment


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a card that I made using Mix and Match Clear Stamps (DC19095) (Dreamerland Crafts)!  Love the images for this stamp. There are so many different scenes that can be created. I chose to do a night scene with the 2 best friends sharing the serenity of the night sky.

To make this card, I first die cut some Bristol paper and then drew in the hills with light pencil and traced around the stamps to get the general idea of placement. I created a masked image of the bear and bunny using Inkadoo Stamping Mask Paper and Post-It Note for the hills and cut them both out. Next I erased all of the lines so that you could barely see them and stamped the bear and the bunny image directly onto the Bristol Paper. Next, I mounted the mask of the characters and hills that I had cut out previously over top of the stamped images so that they would be protected while I coloured in the sky.

To do the sky I used a mixture of Tim Holtz inks listed below and PrismaColor pencils. Then I blended all of the colours together using Gamsol and a blending paper stump. I repeated the process with the PrismaColor pencils several times.

Once the sky was completed, I removed the stencil for the grass and proceeded to colour it in using the same technique that I had used for the sky.

Lastly, I removed the mask for the bear and bunny and coloured them in. I added in some small trees using a Black Prismacolor pencil.

I popped my finished image, back into my MISTI again and stamped the sentiment using VersaMark. I also stamped in the stars in the sky and embossed everything with Ranger Embossing Powder White – Extra Fine Detail. I also used a brush and tapped some of the white embossing powder all over the sky. Then heated it with my Marvy Uchida – Embossing Heat Tool. Lastly, I stamped and embossed the seagulls using VersaFine – Onyx Black and Ranger – Clear Super Fine Detail embossing powder. I coloured them in using Black PrismaColor pencil and then added in some highlights on the wings.

I popped up the coloured image and blue cardstock with 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment: Mix and Match Clear Stamps (DC19095) (Dreamerland Crafts)

Inks: Versa Fine – Onyx Black, Versa Mark, (Sky Base): Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Ink – Chipped Sapphire, Tim Holtz Distress Ink – Black Soot

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder.

Paper: Inkadoo Stamping Mask Paper, Blue and Green – Recollections paper, Bristol Paper

Die Cuts:  My Creative Time -Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape

Image coloured with PrismaColor Pencils:

Sky:  Indigo Blue (PC901), Indanthrone Blue (PC208), Violet Blue (PC933), Denim Blue (PC1101), Black (PC935)

Grass: Dark Green (PC908), Peacock Green (PC907), Marine Green (PC988), Grass Green (909)

Bear: Dark Brown (PC946), Dark Umber (PC947), Chocolate (PC1082), Burnt Ochre (PC943), Sienna Brown (PC945)

Rabbit: 30% Warm Grey (PC1052), 20% Warm Grey (PC1051), 10% Warm Grey (PC1050)

Seagull Wings Highlight: White (PC938), Denim Blue (PC933)

All colours were blended with paper stump and Gamsol blending fluid.

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.