Archives

Smooth Sailing Ahead!!


Today, I’m sharing a card that I made using Dreamerland Crafts stamps called Wishing you a smooth sailing ahead – DCS1703. This card could be used to wish someone smooth sailing for cruising, retirement or for a new job position or even if you knew someone who just bought a new boat for fun! The stamp set also comes with 2 more sentiments, “on a Journey to find Happiness” and “Taking a break from my daily routine”.

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Recollections – Black cardstock was die cut to the size of 4.75″ x 3.5″ using Anna Griffin Empress Mini Machine and My Creative Time – Rectangle Frame Layers. Using the same machine and My Creative Time – Rectangle Frame Dies, I die cut Copic Marker X-Press It Blending Card to the size of 4.5″ x 3.75″. The main image was stamped using my MISTI and Memento – Tuxedo Black ink. I stamped the images again onto Post-It Note paper to create a mask and fussy cut around them. After stamping the main image, I placed the masking of the little girl in the boat on top of the inked image as shown below.

I stamped the mountains starting from the left side, while still using my MISTI and Memento – Tuxedo Black ink. The mountain mask was applied over top of them and I stamped another set of mountains so that they looked like they were behind the first set of mountains. I continued to do this going across the image to create a mountain range. Then, I removed all of the masks and coloured in the image using copic markers.  Copic – Opaque White was used to create the crests of the waves and Stampin’ Up – Whisper White Ink and a small #2 round brush were used to create the clouds in the sky. Versamark, my MISTI and Ranger Embossing Powder White – Extra Fine Detail were used to add in the birds from the same stamp set. Marvy Uchida – Embossing Heat Tool was used to heat emboss the powder. I added U-Line double-sided tape to the back of the image and popped it up onto the black rectangle.

Using my MISTI, Versa Fine – Onyx Black ink and Ranger – Clear Super Fine Detail embossing powder, I stamped and embossed the sentiment onto Hammermill – Premium Colour 100 lb. cardstock. Marvy Uchida – Embossing Heat Tool was used to heat emboss this as well. Using Anna Griffin Empress Mini Machine and My Creative Time – Bunch of Fun Circle Dies, I die cut the sentiment with a 1.25″ circle. With a 1.5″ circle punch, I die cut Recollections – Black cardstock. I added U-Line double-side tape to the back of the sentiment and popped it up onto the larger black circle. I added a double layer of the U-Line double-side tape to the right of the black rectangle on each side and popped up the larger black circle to the bottom right of the card. YNS Gumdrops – Ice Ice Baby Sparkly Gumdrops were added to the top left corner of the card to finish it off.

Card Recipe:

Stamps and Sentiment: Wishing you a smooth sailing ahead – DCS17043 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark, Stampin’ Up – Whisper White Ink, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Black cardstock

Die Cuts: My Creative Time – Rectangle Frame Layers, My Creative Time – Rectangle Frame Dies, My Creative Time – Bunch of Fun Circle Dies, 1.5″ Circle Punch

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, YNS Gumdrops – Ice Ice Baby Sparkly Gumdrops, Anna Griffin Empress Mini Machine

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R30, R20

Hair: E47, E44, E43, E41

Blouse and Bow: R83, R81, RV00, RV000

Dog: E35, E33, E31, E30

Bathtub Boat: RV09, RV06, RV04, RV02, E50, E40, E30, E29, E27, E25

Water: BG70, BG53, BG32, BG11, BG10, B93, B91, B52, B41, B06, B04, B02, B01, (Copic – Opaque White)

Sky: B02, B01, B00, B000

Mountains: BV25, BV23, BV20, YG17, YG13, YG03

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

A Flower For You Mom!!


Today, I’m sharing a Mother’s Day card that I made using Dreamerland Crafts stamps called Say Love With Flowers – D162017It’s that time of year when we all get to celebrate our Mother’s special day. A bond between a child and their mother is something so special and rare! Happy Mother’s Day to all of you special ladies out there and especially to my mom whom we all love dearly!

To make this card I used a base of 6″ x 6″ using AC White Cardstock cardstock. Recollections – Matte Gold Foil cardstock was cut to the same size as the base and adhered with double-sided tape. P13 – Hello Spring was cut to 5.75″ x 5.75″ and the edges were inked with Tim Holtz Distress Ink – Saltwater Taffy. This was popped up onto the base card using U-Line double-sided tape. Using my Cuttlebug and PinkFresh Studio Essentials – Blanket Stitched Oval die, I die cut Copic Marker X-Press It Blending Card. The main image was stamped using my MISTI and Memento – Tuxedo Black ink. I coloured in the image using copic markers and created the background. Once the background was completed, I dipped a Q-tip into some Rubbing Alcohol ink and dotted it all over the background. Then using a Ranger – Emboss It Pen Clear, I went around the oval where the pattern was and applied Ranger Super Fine Gold Embossing powder. then heated it with my Marvy Uchida – Embossing Heat Tool. I applied U-Line double-sided tape to the back of the image and popped it up onto the card. For the sentiment, I used the stamps from Die Cutting Essentials Magazine – Issue 75 – Geo Floral Wreath Dies & Stamps. Using my MISTI, Versamark ink and Ranger Embossing Powder White – Extra Fine Detail, I embossed the sentiment onto a scrap piece of green cardstock. I fussy cut around the sentiment and applied U-Line double-side tape to pop it up at the bottom of the card.

Card Recipe:

Stamps: Say Love With Flowers – D16207 – Dreamerland Crafts

Sentiment: Die Cutting Essentials Magazine – Issue 75 – Geo Floral Wreath Dies & Stamps

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Saltwater Taffy, Versamark

Paper: Copic Marker X-Press It Blending Card, Recollections – Matte Gold Foil cardstock, AC White Cardstock cardstock, P13 – Hello Spring (6″ x 6″)

Die Cuts: PinkFresh Studio Essentials – Blanket Stitched Oval

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger Super Fine Gold Embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Ranger – Emboss It Pen Clear, U-Line double-sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R30, R20

Hair: E47, E44, E43, E41

Dress: R83, R81, RV00, RV000

Shoes: R83, R81, RV00, W9, W7

Kitty: C7, C5, C3, R30

Flower and Stem: R83, R81, R32, RV00, RV000, Y00, Y000, YG67, YG63, YG23, YG11

Background: R11, Y11, Rubbing Alcohol and Q-Tip

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Flying By!!


Today, I’m sharing a card using Dreamerland Crafts stamps called Off To A Flying Start – D16003. We have had a lot of pilots in our family in the past and still do. I’ve had the precious opportunity of flying in a small 2 seater plane that my dad and uncle had built years ago and also being allowed into the cockpit of an Air Canada plane on our honeymoon flight in both directions over 30 years ago when it was still possible to this. On the flight home there was an electrical storm. This was so awesome to see. These are experiences that I will never forget as I loved every moment.

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Copic Marker X-Press It Blending Card was cut to the same size as the base and Dreamerland image Off To A Flying Start – D16003 was stamped using my MISTI and Memento – Tuxedo Black ink. The image was stamped a second time onto some plain paper and then fussy cut to create a mask. I coloured in the image using Copic markers. The mask created earlier was then put over top of the coloured image and I applied some Post-It tape along the bottom to hold it into place. Using some stencils that I had previously created using Avery Elle – Pierced Clouds Die, multiple blue Tim Holtz Distress inks listed below and a Picket Fence – Blending Brush, I created the cloudy background. Then, I applied the grass using Copic markers. The coloured image was then put back into my MISTI and using Versa Fine – Onyx Black to stamp the sentiment Sky’s The Limit by Kraftin’ Kimmie. Ranger Embossing Powder White – Extra Fine Detail was applied and heated with Marvy Uchida – Embossing Heat Tool. I applied double-side tape and attached it to the base card to finish it off.

Card Recipe:

Stamps: Off To A Flying Start – D16003 – Dreamerland Crafts

Sentiment: Sky’s The Limit – Kraftin’ Kimmie

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Broken China, Tim Holtz Distress Inks – Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts \ Stencils: Avery Elle – Pierced Clouds Die (D-05-01) (Created stencils from dies)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Picket Fence – Blending Brush, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R24, R22, R20

Hair: E47

Jacket and Hat: E89, E87, E84

Pants: E47, E44, E43

Boots and Mitts: E27, E25, E23, E21

Scarf: E50, E40, E31, E30

Goggles: W6, W3, B00

Wings: E33, E31, E30

Grass: YG17, YG13, YG03, YG01

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Every Little Moment!!


Today, I’m sharing a card using Dreamerland Crafts stamps called When You Love Someone – D20005 and Mix and Match Collection – Railing and Lampost – M18309 for the main images and Mix and Match – DCS19095 for the sentiment. Loved combining these stamps as they could be used for Valentine’s Day, Anniversary or just a note to let your special someone know how much you love them.

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. I die cut Copic Marker X-Press It Blending Card paper with my Cuttlebug and My Creative Time – Rectangle Frame Layers. Using my MISTI and Memento – Tuxedo Black ink, I stamped the Dreamerland image When You Love Someone – D20005 and then stamped it again onto Post-It Note paper. I cut around the image on the Post-It Note paper and applied it over top of my stamped image. Once this was in place, I used my MISTI and Memento – Tuxedo Black ink to stamp the Dreamerland image Mix and Match Collection – Railing and Lampost – M18309. The railings were stamped on both sides of the image and then again using my MISTI, I stamped the lamp posts multiple times. I also used Copic – W9 to make the bottom halves a little darker as well. This was done on both sides of the main image. I had used some Post-It note paper to put on both ends so that the fence wouldn’t go past the small border around the card when I was stamping. I coloured in the image with Copic Markers. Once the image and background were coloured in, I stamped the sentiment using VersaMark ink, my MISTI and Ranger Embossing Powder White – Extra Fine Detail. Lastly, some stars were added to the sky using Gelly Roll Sakura #5 Pen and Gelly Roll Sakura #10 Pen.  I adhered the completed image to some Recollections – Black cardstock using double-sided tape. To finish off the card, I applied U-Line double-sided tape and popped the completed image and matting onto the base card.

Card Recipe:

Stamps: When You Love Someone – D20005 – Dreamerland Crafts, Mix and Match Collection – Railing and Lampost – M18309 – Dreamerland Crafts

Sentiment: Mix and Match – DCS19095 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Black cardstock

Die Cuts: My Creative Time – Rectangle Frame Layers

Embossing Powed: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Gelly Roll Sakura #5 Pen, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20, Eyes – Gelly Roll Sakura #10 Pen for highlight

Hair: E47, E44, E43, E41

Dress and Shoes: R83, R81, RV00, RV000, E23, 21

Jeans: B26, B23, B21

Boots: E27, E25, E23, E21

Shirt: BG99, YG67, YG17, G21

Walkway: E55, E53, E51, E50, W4, W3

Night Sky and Lights: B99, B97, B95, B93, Y02, Y000, Gelly Roll Sakura #5 Pen, Gelly Roll Sakura #10 Pen

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Christmas Caroling!!


Today, I’m sharing a card using Dreamerland Crafts stamps called Mix and Match Clear Stamps – DCS19090 and Mix and Match Clear Stamps – DCS19092. These little woodland creatures are enjoying the miracle of Christmas with some caroling.

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Using my Cuttlebug and My Creative Time – Rectangle Frame Dies, I die-cut Copic Marker X-Press It Blending Card and stamped the images using my MISTI and Memento – Tuxedo Black ink. I coloured in the images with Copic markers and added some decorations onto the tree using Nuvo Crystal Drops – Dandelion Yellow, Red Berry and Caribbean Ocean. To add some glitter to the snow, I applied Stickles – Diamond and for the snow in the sky, I used a Gelly Roll Sakura #10 Pen. The sentiment and music symbols were added using Versamark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat embossed with a Marvy Uchida – Embossing Heat Tool. Your Next Die – Stitched Frame Snowfall Hill was used to die cut Crafter’s Companion – Luxury Cardstock – Gold. Using glue, I adhered the background frame and coloured image to the base.

Card Recipe:

Stamp: Mix and Match Clear Stamps – DCS19090 – Dreamerland Crafts, Mix and Match Clear Stamps – DCS19092 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafter’s Companion – Luxury Cardstock – Gold

Die Cuts: My Creative Time – Rectangle Frame Dies, Your Next Die – Stitched Frame Snowfall Hill

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Nuvo Crystal Drops: Dandelion Yellow, Red Berry, Caribbean Ocean

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Stickles – Diamond

Image coloured with Copic Markers:

Angel Bear: E53, E51, E50, E37, E35, E34, E33, E31, E30, R59, R37, R35, R30, R02, R00

Rabbits: C7, C5, C3, C1, E37, E35, E34, E33, E31, R59, R37, R35, R14, R02, R00, BV23, BV20, Colorless Blender

Tree, Star and Base of Tree: G99, YG67, YG17, G21, Y17, Y15, Y13. Y04, E37, R59, R37, R35

Sky: B99, B97, B95

Ground: BV23, BV20, B00, BG000, C0

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Dress Up The Christmas Tree!!


Today, I’m sharing a card using Dreamerland Crafts stamps called Mix and Match Clear Stamps – DCS19090.  These little woodland creatures are enjoying their new tree on a snowy evening. Do you have an outdoor Christmas tree?

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Using my Cuttlebug and My Creative Time – Rectangle Frame Dies, I die-cut Crafter’s Companion – Luxury Cardstock – Gold to the size of 5.5″ x 4.25″ and adhered it to the base using double-sided tape. Your Next Die – Stiched Frame Snowfall Hill was used to die cut Creative Memories – Glacier Designer Paper Pack for the snow frame and glued to the base background. With My Creative Time – Rectangle Frame Dies, I also die cut Copic Marker X-Press It Blending Card cardstock to the size of 4.5″ x 3.25″.

I stamped the image using my MISTI and Memento – Tuxedo Black ink onto the Copic Marker X-Press It Blending Card cardstock. I coloured in the image with Copic Markers. The sentiment was added using Versamark and Ranger Embossing Powder White – Extra Fine Detail. This was heated up with a Marvy Uchida – Embossing Heat Tool. The background snow was applied with a Gelly Roll Sakura #10 Pen. Crayola – Yellow Glitter Glue was applied to the glow around the star of the tree and Cosmic Shimmer Fluffy Stuff combined with WOW! Sparkling Snow Embossing Glitter was used to create the snow on the bottom. Stickles – Diamond was applied between the snow drifts to create a little more glitter. Nuvo Crystal Drops – Dandelion Yellow, Red Berry and Caribbean Ocean were applied to the tree for decorations. Once everything was dry, I applied U-Line double-sided tap to the back of the coloured image and applied it to the base to complete the card.

Card Recipe:

Stamp: Mix and Match Clear Stamps – DCS19090 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafter’s Companion – Luxury Cardstock – Gold, Creative Memories – Glacier Designer Paper Pack 12 x 12″

Die Cuts: My Creative Time – Rectangle Frame Dies, Your Next Die – Stiched Frame Snowfall Hill

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, WOW! Sparkling Snow Embossing Glitter

Nuvo Crystal Drops: Dandelion Yellow, Red Berry, Caribbean Ocean

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Crayola – Yellow Glitter Glue, Cosmic Shimmer Fluffy Stuff, Stickles – Diamond

Image coloured with Copic Markers:

Bear and Scarf: E53, E51, E50, E37, E35, E34, E33, E31, E30, R59, R37, R35, R02, R00

Rabbit and Scarf: R59, R37, R35, R02, R00, BV23, BV20, Colorless Blender

Tree, Star and Base of Tree: G99, YG67, YG17, G21, Y17, Y15, Y13. Y04

Sky: B99, B97, B95, B93

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.