Archives

Merry Little Christmas!!


Today, I’m sharing a Christmas card using Dreamerland Crafts stamps called The Most Wonderful Gift Of All – D18038 and for the sentiment Happiness Is Time Spent With A Good Friend – D20009. Do you remember playing with your train sets at Christmas time? I remember playing with my brothers and cousins sets. It was always so much fun watching the trains go around the tracks.

 

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. For the background paper, I used Recollections – Burgundy cardstock cut to the same size as the base. The background layer was cut from Carta Bella – Santa’s Workshop paper, cut to the size of 5-3/8″ x 4-1/8″. Tim Holtz Distress Ink – Rustic Wilderness was used to ink around the edges and it was attached to the burgundy background using double-sided tape. My Cuttlebug and My Creative Time – Rectangle Frame Die was used to die-cut the Recollections – Burgundy cardstock for the background to go behind the coloured image. This was popped up onto the main background with 3M double-sided tape. Using my Cuttlebug and My Creative Time – Rectangle Frame Layers, I die cut Copic Marker X-Press It Blending Cardstock. With my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto this die cut. I then taped the die cut back over the paper and coloured in the image using Copic markers. This allowed me to keep a thin white border around the coloured image. Stickles – Diamond was used to fill in the area on the inside of the tracks to represent a snowy base. I used Gelly Roll Sakura #8 Pen to add some snow to the little trees and some of the roof tops. Once the Stickles was all dry, I stamped the sentiment using Versamark ink. This was embossed using my Marvy Heat Embossing Tool and Ranger – Clear Super Fine Detail embossing powder. I added 3M double-sided tape to the back of the coloured image and popped it up.

Lastly, I placed some washi-tape onto white cardstock and trimmed it to have a thin white border. I ran this through my Xyron Create a Sticker so that it would lay flat and placed it onto some Recollections – Burgundy cardstock. Using my paper trimmer, I trimmed around the edges and them popped it up onto the background using 3M VHB – 2 sided tape to finish off the card.

Card Recipe:

Stamp: The Most Wonderful Gift Of All – D18038 – Dreamerland Crafts

Sentiment: Happiness Is Time Spent With A Good Friend – D20009 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark, Tim Holtz Distress Ink – Rustic Wilderness

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Carta Bella – Santa’s Workshop (12″ x 12″), Recollections – Burgundy

Die Cuts: My Creative Time – Rectangle Frame Layers, My Creative Time – Rectangle Frame Dies

Stickles: Diamond

Embossing Powder: Ranger – Clear Super Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug,  Marvy Heat Embossing Tool, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen, Xyron Create a Sticker, 3M VHB – 2 sided tape, Gelly Roll Sakura #5 Pen

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R22, R20 (Eyes – Sakura Glaze – Black pen, Gelly Roll Sakura #5 Pen)

Hair: E47, E44, E43, E41

PJ’s: B37, B14, B12

Bear: E57, E55, E53, E51, R22, R20 (Eyes and Nose – Sakura Glaze – Black pen, Gelly Roll Sakura #5 Pen)

Trees: YG67, YG17, G21, E23

Homes: B02, B00, C2, C1, C00, E23

Train: Y17, Y15, Y02, T7, T5, T3, T1, C2, C1, C00, R37, R35

Floor: E43, E42, E41

Wall: Y08, Y06, Y04

Floor Boards: C1, C0, C00, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Merry and Bright!!


Today, I’m sharing a light up Christmas card using Dreamerland Crafts stamps called Lets Decorate Our Home – D18037 and for the sentiment Holiday Sentiments Set 003. It’s never too early to start making Christmas cards and here’s hoping that this card will brightens someone’s day this coming Christmas.

To make this card I used a base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. For the background paper, I used my Cuttlebug and My Creative Time – Rectangle Frame Dies to die cut American Crafts – “Holiday” paper. The edges were inked with Tim Holtz Distress Inks – Peacock Feathers and then I adhered the background to the base card using double-sided tape. Using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto Copic Marker X-Press It Blending Card and coloured it in with Copic markers. I added some Stickles – Diamond to the pompom on the hat and fur at the top of the little girl’s boots. For the fluffy snow, I used Cosmic Shimmer Fluffy Stuff and sprinkled on some DecoArt Glamour Dust while it was still wet. Using my Marvy Heat Embossing Tool, I heated up the liquid for it to puff up and look like sparkling snow. I poked holes in the card where I wanted the blue lights to go. I applied some tissue paper over the holes on the back of the image to diffuse the lights. Using Versamark ink and my MISTI, I stamped the sentiment and then applied Ranger Embossing Powder White – Extra Fine Detail. This too was heated with my Marvy Heat Embossing Tool. Lastly, added some snowflakes using a Gelly Roll Sakura #10 Pen. I then set the coloured image aside.

It was now time to set up the bright blue lights for the house using Chibi Lights, copper tape and a battery. I cut out an another rectangle slightly smaller than the coloured image. Placing the coloured image over top of the smaller rectangle, I used a pencil for the placement of the lights on the roof. For the placement of the battery, I used the remote in the girl’s hands as a guide. After mapping out the route for the lights, I place the copper tape down and added 3 blue Chibi Lights to the “+” and “-” paths leading back to the battery. The set up was tested to make sure the lights would come on. Once this was completed, I used 3 layers of 3M VHB – 2 sided tape around the 3 sides of the battery to pop the image up high enough off of the card so that the battery would only light up the lights when someone pressed down on it. To keep the card even all the way around, I added 3 layers of 3M VHB – 2 sided tape to the remainder of the smaller rectangle. The image was then attached to the smaller rectangle. I added some double-sided tape to the back of the smaller rectangle and adhered it directly to the card to finish it off.

Card Recipe:

Stamp: Lets Decorate Our Home – D18037 – Dreamerland Crafts

Sentiment: Holiday Sentiments Set 003 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Peacock Feathers, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., American Crafts – “Holiday” 6″ x 6″ (15.2 x 15.2 cm)

Die Cuts: My Creative Time – Rectangle Frame Dies

Stickles: Diamond

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Forever in Time – Pop-Dot Tape, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust, Marvy Heat Embossing Tool, Sakura Glaze – Black, Gelly Roll Sakura #10 Pen, Chibi Lights

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20 (Eyes – Sakura Glaze – Black)

Hair: E47, E44, E43

Hat, Scarf and Boots: BG72, BG57, BG32, BG11

Coat: R59, R37, R35

Pants and Boot Soles: E25

Dog: E27, E25, E23 (Eyes and Nose – Sakura Glaze – Black)

Rabbit: E35, E33, E31 (Eyes and Nose – Sakura Glaze – Black)

House: E57, E55, E53, Y06, Y02

Roof: C5, C4, C3, C2, C1

Lights: Y17, Y02, B000

Snow: B60, B000, B0000, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust

Sky: B99, B97, B95

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Sending Big Hugs!!


Today, I’m sharing a card using this super adorable image from Dreamerland Crafts stamps called My True Love – D18018. Great big in person hugs or even virtual hugs are always nice to give to give to someone or something that you love.

Here is a close-up of the featured image.

 

To make this card I used a base card of 8-7/8″ x 3-7/8″ using Aqua cardstock. I die cut Crafts – Foil Designer Paper – 02-3080678 using my Couture Creations – Go Power and Emboss and PinkFresh Studio Essentials – Slim Stitched Rectangle Die Set. Using Tim Holtz Distress Ink – Evergreen Bough, I inked all around the edges of the card and die cut. Then I inked the front of the die cut with Tim Holtz Distress Inks: Tumbled Glass, Evergreen Bough, Peacock Feathers, and Speckled Egg using Picket Fence Studio Blender Brushes. Tim Holtz Distress Ink – Rustic Wilderness was applied last at the bottom of the panel to represent grass. I applied 3M VHB – 2 sided tape to the back of the die cut and added it to the base card.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto Copic Marker X-Press It Blending Card and coloured it in with Copic markers. The coloured image was fussy cut out and a black marker was used to go around all of the edges. This was then applied directly to the patterned paper using 3M VHB – 2 sided tape.

To create the “Sending Big Hugs” sentiment, I first took an 8.5″ x 11″ piece of black cardstock and cut it at the 4.25″ mark. Then I ran both pieces through my Xyron Create a Sticker. I find this makes it much simpler than trying to add glue to each piece. Once this was done, using my Cuttlebug, I die cut the black cardstock using Lawn Fawn – “Sending Big Hugs” die 6 times. Then I did it 1 more time using Forever In Time – Glam Glitter Cardstock – Ombre Pastel after I had run it through my Xyron Create a Sticker. I cut around the word “Big” to make it stand out.

I peeled off the sticker from the back of each of them and applied each layer on top of each other to create an embossed image. Then I added the sparkly “Big” as a last layer. I applied this to the patterned paper at the top of the card. Lastly, If felt something was missing, so I added some Stickles – Aqua all around the edges of the large rectangle die cut.

Card Recipe:

Stamp: My True Love – D18018 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Inks – Peacock Feathers, Tim Holtz Distress Ink – Rustic Wilderness, Tim Holtz – Speckled Egg

Paper: Copic Marker X-Press It Blending Card, Crafts – Foil Designer Paper – 02-3080678 (12″ x 12″), Aqua – Cardstock, Forever In Time – Glam Glitter Cardstock – Ombre Pastel

Die Cuts: PinkFresh Studio Essentials – Slim Stitched Rectangle, Lawn Fawn – Giant Sending Big Hugs

Stickles: Aqua

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Picket Fence Studio Blender Brushes, Xyron Create a Sticker, Couture Creations – Go Power, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E15, Y38, Y21, YR23

Dress: BG72, BG57, BG32, BG11

Bears:  E57, E53, E51, E50, E33, E31, E30, E27, E25, E23, E21

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Hugs!!


Today, I’m sharing a card that I made using Dreamerland Crafts stamps called True Friendship – D18020 for the main image and sentiment. It’s always great to see our friends and give them a big hug. Now, it’s wonderful that more and more of my family and friends are getting their 2nd Covid shots, so we will all be able to hug each other again when we see each other. Have you given someone a hug today?

To make this card I used a base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. I die cut the aqua and pink layers using my Couture Creations – Go Power and Emboss and Gina Marie Designs – Loopy Rectangle Die Set. I trimmed off the loops and line pattern to create a slim border out of the pink cardstock. I applied liquid glue on the the back of the aqua design and adhered it directly to the base card. Next, I applied some double-sided foam tape to the back of the pink rectangle and placed it on  top of the aqua die cut.

For the main image, I first die cut Copic Marker X-Press It Blending Cardstock using my Cuttlebug and My Creative Time – Rectangle Frame Layers. Next, using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto this and coloured it in with Copic markers. I stamped a second image onto regular copy paper and fussy cut around the image by hand to create a mask. This I placed over top of the coloured image of the 2 little girls. I was able to create the cloudy sky using the stencil from Heffy Doodle – Cloudy Skies, a combination of Tim Holtz Distress Ink – Salty Ocean and Tim Holtz Distress Inks – Broken China and a Picket Fence Studio Blender Brush. The grass base was created with Tim Holtz Distress Ink – Mowed Lawn, Lawn Fawn – Slimline Grassy Hillside Stencils and a Picket Fence Studio Blender Brush. Then, I removed the mask and added in a little more texture to the grass using the Copics listed below.

To create the “Hugs” sentiment, I first ran some black cardstock through my Xyron Create a Sticker. Then using the die-cut from Sugar Script – Hugs, I cut it out 4 times to create a raised image. Since, I had already made stickers out of them, it was easy to peel off the backing and layer them on top of each other. I layered the first 3 and then on the last layer, I first applied Stickles – Black Diamond to it and set it aside to dry. Once, it was dry, I added it as the top layer. I just loved how it had that added sparkle. LOL!

To complete my card, I applied some liquid glue to the back of the coloured image and then adhered it directly to the pink layer. I peeled the backing off of my bottom layer of “Hugs” and applied it directly to the coloured image.

Card Recipe:

Stamp: True Friendship – D18020 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Broken China, Tim Holtz Distress Ink – Mowed Lawn

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Doodebug – Spring Solid Assortment (12″ x 12″)

Die Cuts: My Creative Time – Rectangle Frame Layers, Gina Marie Designs – Loopy Rectangle Die Set, Sugar Script – Hugs

Stencil: Heffy Doodle – Cloudy Skies, Lawn Fawn – Slimline Grassy Hillside Stencils

Embossing Powder: Ranger – Clear Super Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Picket Fence Studio Blender Brushes, Xyron Create a Sticker, Couture Creations – Go Power

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20

Hair: E47, E44, E43, E40, E15, Y38, Y21

Dress1: YG03, YG01, R14, R13, R11

Dress2:  RV02, BG72, BG57, BG13, BG11

Grass: YG17, YG13, YG03, YG01

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Feel Good!!


Today, I’m sharing a card that I made using Dreamerland Crafts stamps called Having You Around – D19078 for the main image and sentiment. There’s nothing like the love between a boy and his faithful companion. They become best friends as they both grow older together!!!

To make this card I used a base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. I also cut a panel the same size out of Copic Marker X-Press It Blending Card. I used this to create my background using stencils I created to make clouds by Avery Elle – Pierced Clouds Die (D-05-01) and inks listed below by Tim Holtz. Copic markers were used to colour in the water and I used My Favourite Things – Slimline Grassy Edges Stencil as a guide for the grass on the bottom of the card. Using my MISTI and Versa Fine – Onyx Black ink, I stamped the sentiment and then embossed the ink with Ranger – Clear Super Fine Detail embossing powder. This was heat set with Marvy Uchida – Embossing Heat Tool. I used double-sided tape and attached my background panel to the base card.

Using my Cuttlebug and dies from Studio Light – Wonderful Autumn, I cut the trees and landscape out of Copic Marker X-Press It Blending Card. Using my Copic markers, I coloured these in as well. Then I layered them on top of each other and used glue to adhere them to the coloured background.

Next, using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto Copic Marker X-Press It Blending Cardstock and coloured it in with Copic markers. I fussy cut around the image by hand and used a black marker to go around all of the edges. 3M VHB – 2 sided tape was applied to the back of the image and it was placed on top of the background to finish off the card.

Card Recipe:

Stamp and Sentiment: Having You Around – D19078 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Broken China, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: Studio Light – Wonderful Autumn – StencilWA311, Avery Elle – Pierced Clouds Die (D-05-01)

Stencil: My Favourite Things – Slimline Grassy Edges Stencil (ST-151)

Embossing Powder: Ranger – Clear Super Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Picket Fence Studio Blender Brushes, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R22, R20

Hair: E47, E44, E43, E40

Shirt and Hat: E89, E87, E84, R24

Jeans:  B26, B23, B21

Dog: E55, E53, E51

Boat: E49, E27, E25, E23, E21

Trees: E25, E23, G99, G94, G82

Grass: YG17, YG13, YG03, YG01

Water: B93, B91, B52, B41, B06, B04, B02, B01, B000

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Birthday Celebration!!


Today, I’m sharing a miniature birthday card that I made using Dreamerland Crafts stamps called Meow Meow 01 – D20013 for the main image and for the sentiments Birthday 07 – DCS17058 and Birthday 08 – DCS17059. I always wanted to try this type of miniature card! I just love the way you get the 3-D effect when you open the card.  So much fun. LOL!

Inside the card:

To make this card I used Lawn Fawn – Centre Picture Window Card to create the base card out of Hot Pink cardstock. The same dies were also used to create the centre pieces and banner using Your Next Stamp Designer Paper Pad – Birthday Girl. The same paper was also used to create the background on the card, front panel and side panels using Lawn Fawn – Centre Picture Window Card Add-On dies. Your Next Stamp – Mini Balloon Trio Die Set was used to die cut the floating balloons and then I tied some black thread to the base of the balloons. I cut 3 small pieces of clear plastic about a 1/4″ wide and attached the double-sided tape to the back of the balloon and at the base of the plastic as well to be used later.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card and also the sentiments onto the patterned pieces. I coloured the image in with Copic markers and then fussy cut around it.

I assembled the card using double-sided tape for each of the panels and centre pieces. I attached the balloons by putting 2 behind the presents and 1 from the top centre piece. Lastly, I added a little bit of double-sided tape to the bottom of the coloured image and attached it to the front of the main centre piece. For the sentiment on the front panel, I inked around the edges with Tim Holtz Distress Ink – Fossilized Amber and then popped it up using 3M VHB – 2 sided tape. I added 2 balloons and used a black marker to create the tails for the balloons.

Card Recipe:

Stamps: Meow Meow 01 – D20013 – Dreamerland Crafts

Sentiments: Birthday 07 – DCS17058 – Dreamerland Crafts, Birthday 08 – DCS17059 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Fossilized Amber

Paper: Copic Marker X-Press It Blending Card, Your Next Stamp Designer Paper Pad – Birthday Girl – 6″ x 6″

Die Cut: Lawn Fawn – Centre Picture Window Card, Lawn Fawn – Centre Picture Window Card Add-On, Your Next Stamp – Mini Balloon Trio Die Set (YNSD241)

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Kitten: C8, C6, C4, R30, R24, R20 (Noses – Sakura Glaze – Black)

Cake and Icing:  RV66, RV55, RV52, RV06, RV04, RV02, G02, Y08, YR16

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Miss You!!


Today, I’m sharing a slim-line card that I made using Dreamerland Crafts stamps called Meow Meow 04 – D20016 for the main image and for the sentiment Just A Note To Say – DCS17038Dreamerland Crafts. Love this new set and I as soon as I saw it, I knew I wanted to make a card to show how a lot of us are feeling right now during these Covid times missing family and friends.

To make this card I used a base card of 7″ x 8.25″ using Hammermill – Premium Colour 100 lb. cardstock. I scored it at 3.25″.  Next, using my Couture Creations – Go Power and Emboss and Whimsy Stamps – Slimline Marquee Die, I die cut Copic Marker X-Press It Blending Card.  Using my MISTI and Memento – Tuxedo Black ink, I stamped all of the images onto the shaped die cuts and coloured them in with Copic markers.

The frame die cut was coloured using Picket Fence Studio Blender Brush and Tim Holtz Distress Inks: Picked Raspberry, Spun Sugar and Worn Lipstick. The sentiments were stamped and embossed onto black cardstock using Versamark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat set using Marvy Uchida – Embossing Heat Tool. My cutter was used to cut the stamped sentiments into small strips. 3M VHB – 2 sided tape was applied to the back of each of the sentiments.

To assemble the card, I first turned the die cuts upside down and used a little bit of Scotch Tape on the back side to keep the inserts in place. Then, I applied double-sided tape across the entire back and attached it directly to the card base. I attached each of the sentiments and finished off the card with Crafts – Rhinestone Stickers.

Card Recipe:

Stamps: Meow Meow 04 – D20016 – Dreamerland Crafts

Sentiments: Just A Note To Say – DCS17038 – Dreamerland Crafts, Love and Cuddles – Penny Black

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Tim Holtz Distress Ink – Spun Sugar, Tim Holtz Distress Ink -Worn Lipstick, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: Whimsy Stamps – Slimline Marquee Die (WSD347)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Couture Creations – Go Power and Emboss, Picket Fence Studio Blender Brushes, Marvy Uchida – Embossing Heat Tool, Crafts – Rhinestone Stickers – 02-3048783

Image coloured with Copic Markers:

Cats: C7, C5, C3, R30, R22, R20, 100, YG23, YG17, G07 (Noses – Sakura Glaze – Black)

Bunny:  E35, E33, E31

Grass: YG17, YG13, YG03, YG01

Sky: B02, B01, B00, B000

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.