Tag Archive | Stickles – Diamond

Believe!!!


It’s Wednesday, and this week, I made a Christmas card using Believe Snowman – TFL006 and Snow Globe – ULF002 by High Hopes Rubber Stamps for the main image and North Pole Greetings – GLL005 (High Hopes Rubber Stamps) for the sentiment. It’s time to start believing the magic of Christmas and the joy that it brings to everyone!

To make my card this week, I began with a card base using AC Cardstock – White cut and folded to 6″ x 6″. The snowflake background is from Lawn Fawn – Let It Shine Snowflakes (6″ x 6″) paper pad. I applied this directly to the base using double-sided tape.

Using Lifestyle Crafts Cutting Dies – Nesting Circles and my Cuttlebug, I die cut a 3.75″ circle from Copic Marker X-Press It Blending Card paper. With my MISTI and Memento – Tuxedo Black ink, I stamped the snowman scene image onto it. I coloured in the image with Copic markers and then added some snow to the sky and snowman’s arms using a Gelly Roll Sakura #8 Pen. Sakura Glaze – Black was added to the eyes of the snowman and birds and the snowman’s mouth. With a Ranger – Emboss It Pen Clear, I added some ink to the top of the Snowman’s hat, sign, icicles, tops of the birdhouses and snow drifts and then heat embossed everything with WOW! Sparkling Snow Embossing Glitter and a Marvy Uchida – Embossing Heat Tool. Stickles – Diamond was added as an extra layer to the snow and Wink of Stella – Clear was applied over all the snowman. This was then set aside to dry.

With my MISTI and Memento – Summer Sky ink I stamped the top part of the globe onto Copic Marker X-Press It Blending Card paper. I cleaned off the stamp and this time, I used some Post-it Notes to hide the background inside the globe and inked the braided border for both the top and bottom of the base with Versamark ink. I applied Ranger Super Fine Detail Gold Embossing powder and heat embossed it using a Marvy Uchida – Embossing Heat Tool. With my globe image still in place on my MISTI, I removed the snowglobe stamp and added the sentiment turning up both ends of the stamp slightly to give the words some curvature. The sentiment was stamped using Versamark ink and then Ranger Super Fine Detail Gold Embossing powder was applied to it and then heat embossed using a Marvy Uchida – Embossing Heat Tool. The base was then coloured in using my Copic markers and a Gelly Roll Stardust – Clear pen was used to colour in the white areas to give it some glitter. I also added some of this pen to the tops of the snowman’s arms. With my scissors, I fussy cut around the entire snow globe.

The card was now ready to assemble. I attached 3M double-side tape to pop up the snow globe onto the main background and then added 3M double-sided tape to the back of the circle and centred it on the top part of the globe. Lastly, to finish off the card, I applied some Nuvo Crystal Drops – Caribbean Ocean, Violet Galaxy and Nuvo Glitter Drops – Sherbert Shimmer to some of the snowflakes on the base card.

Card Recipe:

Stamp: Believe Snowman – TFL006 (High Hopes Rubber Stamps), Snow Globe – ULF002 (High Hopes Rubber Stamps)

Sentiment: North Pole Greetings – GL005 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Memento – Summer Sky ink, Versamark

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Lawn Fawn – Let It Shine Snowflakes (6″ x 6″)

Die Cut: Lifestyle Crafts Cutting Dies – Nesting Circles

Stickles: Diamond

Nuvo: Crystal Drops – Caribbean Ocean, Violet Galaxy and Glitter Drops – Sherbert Shimmer

Embossing Powder:Ranger Super Fine Detail Gold Embossing powder, WOW! Sparkling Snow Embossing Glitter

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Cuttlebug, Gelly Roll Sakura #8 Pen, Ranger – Emboss It Pen Clear, Sakura Glaze – Black pen, Gelly Roll Stardust – Clear pen

Image coloured with Copic Markers:

Snowman: B60, C1, C00, Colorless Blender

Hat and Buttons: C10, C8, C6, C4

Arms and Sign: E27, E25, E23, E21

Scarves, Patches, Hat Band: RV66, RV63, RV55, BG09, BG07, BG02, BG01

Bird Houses: RV66, RV63, RV55, BG09, BG07, BG02, BG01, E27, E25, E23, E21

Birds: R46, R14, R08

Sky: B99, B97, B95, B93, B91

Snow: B60, C1, C00, B0000, BG0000, Colorless Blender

Snow Globe: R46, R14, R08

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Brrr!!!


It’s Wednesday, and this week, I made a Christmas card using Havin’ A Ball Snowman – S147 by High Hopes Rubber Stamps for the main image and Brr… – FDG004 (High Hopes Rubber Stamps) for the sentiment. Brr…. – Winter is coming soon!

To make my card this week, I began with a card base using Hammermill – Premium Colour 100 lb. cut to 4.25″ x 5.5″. I cut out the background from Heartfelt Creations – Merry and Bright Collection and sized it to 4″ x 5.25″. Adding double-sided tape, I adhered this to some yellow cardstock. I cut around the yellow cardstock and left a very thin border. Lastly, I applied some double-sided tape and glue and attached it to the base.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image and sentiment onto Copic Marker X-Press It Blending Card. I coloured in the image and sentiment with Copic markers. I ran the sentiment through my Xyron Create a Sticker and then I fussy cut around the image and the sentiment. Using a black pen, I outlined all of the edges for the image and sentiment, except in the snowy area. I peeled off the backing to the sentiment pieces and adhered them to the card front. I glued the snowman image in place at the bottom of the cut out background. I applied Stickles – Sea Glass to the Sweater cuffs and trim and a little bit in the snow at the bottom of the snowman. Stickles – HIbiscus was applied to the hat trim and pom pom. Stickles – Diamond was added to the snowballs and Stickles Crystal, Diamond and Stardust were all added to the snow to finish off the card.

Card Recipe:

Stamp: Havin’ A Ball Snowman – S147 (High Hopes Rubber Stamps)

Sentiment: Brr… – FDG004 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb. cardstock, Heartfelt Creations – Merry and Bright Collection, Yellow Cardstock

Stickles: Sea Glass, Hibiscus, Crystal, Diamond, Stardust

Tools: MISTI – Most Incredible Stamping Tool, Xyron Create a Sticker

Image coloured with Copic Markers:

Snowman and Snowballs: B60, C1, C00, R30, R20, YR18, YR15, YR14, E27, E25, E23

Hat and Scarf: RV66, RV63, RV55, Y17, Y15, Y13

Sweater: B04, B02, B01, B00

Boots: RV66, RV63, RV55, B04, B02, B01, B00, C7, C5, C3, C1

Sentiment: RV66, RV63, RV55, Y17, Y15, Y13, B04, B02, B01, B00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Santa’s Coming!!!


It’s Wednesday, and this week, I made a card using Motorin’ By Santa – T094 by High Hopes Rubber Stamps for the main image and Coming To Town – G271 (High Hopes Rubber Stamps) for the sentiment. Santa’s motoring through town to bring everyone some Christmas Cheer!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I cut the background paper from Stampin’ Up – Snowflake Splendor Designer Series Paper to be the same size as the base and inked around the edges using Tim Holtz Distress Ink – Salty Ocean. I applied this directly to the base card using double-sided tape. AC – Black cardstock was cut to 5.5″ x .75″ and adhered to the bottom using double-sided tape. I die cut the village using my Cutttlebug, Hammermill – Premium Colour 100 lb. cardstock and Village Edges dies from Elizabeth Craft Designs. I coloured in the homes and put some yellow cardstock behind for the windows. Then I took the little doors, coloured them in and inset them back into the die cuts. Once this was done, I added Gina K Designs – Glitz Glitter Gel – Iridescent to the hills and Stickles – Diamond to the roof tops.

With my MISTI and Memento – Tuxedo Black ink, I stamped both the image and the sentiment onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers and then I fussy cut around it. I added Stickles – Xmas Red to the Holly on the motorbike and Stickles – Diamond to the pop pom on Santa’s hat. Using my Cuttlebug, I die cut the sentiment using Whimsy Stamps – Quick Strips Die Set. I ran this through my Xyron Create a Sticker and placed it on some red cardstock. Then using my cutter, I cut around it leaving a slim border.

Once everything was dry, it was time to assemble the remainder of the card. I applied the houses directly to the base over top of the road. The Santa image and sentiment were both popped up onto the background using 3M double-sided tape.

Card Recipe:

Stamp: Motorin’ By Santa – T094 (High Hopes Rubber Stamps)

Sentiment: Coming To Town – G271 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., AC – Black, Stampin’ Up – Snowflake Splendor Designer Series Paper (12″ x 12″)

Die Cuts: Elizabeth Craft Designs – 1691 – Village Edges, Whimsy Stamps – Quick Strips Die Set – WSD330

Stickles: Xmas Red and Diamond

Tools: MISTI – Most Incredible Stamping Tool, 3M – 2 sided tape, Gina K Designs – Glitz Glitter Gel – Iridescent, Xyron Create a Sticker

Image coloured with Copic Markers:

Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen

Skin: E21, E11, E00, E000, R30, R20

Santa Hat, Clothing: R59, R37, R35

Mitts, Seat, Boots and Wheels: C8, C6, C4

Santa’s Beard, Trim and Smoke: C2, C1, C0

Motorcycle, Decorations, Wheel Hubs and Fenders: R59, R37, R35, G14, YG23, YG11, C8, C6, C5, C4, C3, C2, C1, Y08

Houses: C5, C4, C3, C1, C0, E55, E53, E51, E50, E44, E43, E41, E15, E13, BV25, BV13, BV11, BV02, B26, B24, B23

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Time For Warm Socks!!


I’m so happy to join the team of PPCF designers! Today is day 3 of our event for sponsoring CCDesigns on Passionate Paper Creations and Friends FB Group. The card I’m featuring for this event is the New Socks Clear Stamp Set.

To make the card, I began with the base 12″ x 6″ of AC White Cardstock. This was scored at 6″ x 9″ to create an easel card. Closed, the card measures 6″ x 6″. I cut Hammermill – Premium 100 Colour cardstock 6″ x 6″ and coloured in the flooring and base boards with Copic markers.  For the background wall, I cut Momenta – Cardstock to the size of 6″ x 5.5″. I created the large window using Paper Roses – Victorian Window die, my Cuttlebug and Hammermill – Premium Colour 100 lb. paper. I traced around the die and then manually cut the background from Pebbles – Home for Christmas paper pad. I did the same procedure for cutting Judi-Kins Embossable Window Plastic. I glued the plastic window to the die cut and added Stickles – Diamond to the back of the window along the frames. Once the Stickles was dry, I added some trees from Make Special Cards XMas 2015 – Issue 3 to the back of the plastic window and glued the snowy background onto the plastic window and frame to complete the scene.  This was attached directly to the wall background using glue.

The characters were coloured with Copic markers and I added 3M double-sided tape to the back of the images after fussy cutting around them to pop them up on the page. Using the same paper that I used for the wall background, I cut to be 4″ x 1.75″ and popped up onto the bottom half of the base card using 3M double-sided tape (2 layers). The sentiment was cut to 3-13/16″ x 1-9/16″ and attached directly to the previous cut. To complete the card, the 6″ x 6″ scene was attached to the bottom half of the 3″ score previously done. The edges of the green paper were inked with Tim Holtz Distress Ink – Rustic Wilderness.

Card Recipe:

Stamp and Sentiments: New Socks Clear Stamp Set – CC Designs

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., AC White Cardstock, Pebbles – Home for Christmas paper pad – 36 papers- 6 x 6 in (15.2 x 15.2 cm), Momenta – Cardstock, Judi-Kins Embossable Window Plastic 4.25″ x 5.5″

Die Cut: Paper Roses – Victorian Window – 17388

Miscellaneous: Cuttlebug, 3M double-sided tape, Stickles – Diamond

Image coloured with Copic Markers:

Bear: E53, E29, E27, E25, E23, E21

Sweater and Socks: B37, B14, B12, R59, R37, R35

Bunny: B60, C2, C1, C0, C00, R30, R20

Sweater and Socks: BG09, BG05, BG02, BG01, Y17, Y15, Y02, YG05, YG03, YG01

If you are a member of Passionate Paper Creations and Friends FB Group
you can go to the top of the page and get a shopping discount.
If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Hope you like it and have a great week!

Winter Fun!!!


It’s Wednesday, and this week, I made a card using Bearly Swooshin’ – T202 by High Hopes Rubber Stamps for the main image and Roundin’ Up – G190 (High Hopes Rubber Stamps) for the sentiment. Winter was always a fun time for me growing up. We had so many outdoor rinks and played so many winter sports. I tried X-Country skiing, but in no way would ever attempt downhill skiing, I was dangerous enough on X-Cross Country skis. I wonder it that’s why everyone I ever went skiing with would only go once with me. LOL!

To make my card this week, I began with a card base of AC Cardstock – White cut and scored to be 6″ x 6″. I cut the background paper from Recollections – Burgundy cardstock to the same size as the base and used double-side tape to apply it directly to it. Photo-Play – O Canada 2 – Ice Rink paper was cut to the size of 5.75″ x 5.75″ and inked around the edges using Tim Holtz Distress Ink – Rustic Wilderness. I applied this directly to burgundy background using double-sided tape. Using Hero Arts – Infinity Dies – Rounded Rectangle dies and my Cuttlebug, I die cut the following: Copic Marker X-Press It Blending Card, Recollections – Burgundy cardstock, AC – Green Cardstock and Recollections – White cardstock.

The image and sentiment were stamped using my MISTI and Memento – Tuxedo Black ink. I coloured in the image with Copic markers and used a Gelly Roll Sakura #8 Pen to create the snow in the sky and whites of the bear’s eyes. Sakura Glaze – Black Pen was used for the eyes and nose. Just love the embossed look those 2 pens give to an image. Lastly, I added some Stickles – Diamond and some Clear Glitter glue for the snow. Once the glitter was all dry, I attached the finished image to the burgundy rounded rectangle with 3M VHB double-sided tape to pop it up. Then, I applied 3M double-sided tape onto the back of the larger rectangle to pop it up on the pictured background. The sentiment was inked with Tim Holtz Distress Ink – Rustic Wilderness and I ran it through my Xyron Create a Sticker and placed it on top of the small green rectangle. I added 3 layers of the 3M VHB – 2 sided tape to the one side to pop it up and some glue and placed it on top of the popped-up coloured image. Lastly, to complete the card, I added some YNS Gumdrops.

Card Recipe:

Stamp: Bearly Swooshin’ – T202 (High Hopes Rubber Stamps)

Sentiment: Roundin’ Up – G190 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Photo-Play – O Canada 2 – Ice Rink (12″ x 12″), Recollections – Burgundy, AC – Green Cardstock and Recollections – White Cardstock

Die Cuts: Hero Arts – Infinity Dies – Rounded Rectangle (DI465)

Tools: MISTI – Most Incredible Stamping Tool, 3M – 2 sided tape, Sakura Glaze – Black Pen, Gelly Roll Sakura #8 Pen, Xyron Create a Sticker, 3M VHB – 2 sided tape, YNS Gumdrops, Cuttlebug

Image coloured with Copic Markers:

Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #8 Pen

Bear: E47, E44, E43

Hat, Scarf, Mitts and Bindings: R59, R37, R35, C1, C0, C00, Colorless Blender

Skis, Goggles and Poles: B99, B95, B93, B91, B00, 100, T6

Background: G43, G40, G12

Snow: Stickles – Diamond, Clear Glitter Glue

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Merry Little Christmas!!


Today, I’m sharing a Christmas card using Dreamerland Crafts stamps called The Most Wonderful Gift Of All – D18038 and for the sentiment Happiness Is Time Spent With A Good Friend – D20009. Do you remember playing with your train sets at Christmas time? I remember playing with my brothers and cousins sets. It was always so much fun watching the trains go around the tracks.

 

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. For the background paper, I used Recollections – Burgundy cardstock cut to the same size as the base. The background layer was cut from Carta Bella – Santa’s Workshop paper, cut to the size of 5-3/8″ x 4-1/8″. Tim Holtz Distress Ink – Rustic Wilderness was used to ink around the edges and it was attached to the burgundy background using double-sided tape. My Cuttlebug and My Creative Time – Rectangle Frame Die was used to die-cut the Recollections – Burgundy cardstock for the background to go behind the coloured image. This was popped up onto the main background with 3M double-sided tape. Using my Cuttlebug and My Creative Time – Rectangle Frame Layers, I die cut Copic Marker X-Press It Blending Cardstock. With my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto this die cut. I then taped the die cut back over the paper and coloured in the image using Copic markers. This allowed me to keep a thin white border around the coloured image. Stickles – Diamond was used to fill in the area on the inside of the tracks to represent a snowy base. I used Gelly Roll Sakura #8 Pen to add some snow to the little trees and some of the roof tops. Once the Stickles was all dry, I stamped the sentiment using Versamark ink. This was embossed using my Marvy Heat Embossing Tool and Ranger – Clear Super Fine Detail embossing powder. I added 3M double-sided tape to the back of the coloured image and popped it up.

Lastly, I placed some washi-tape onto white cardstock and trimmed it to have a thin white border. I ran this through my Xyron Create a Sticker so that it would lay flat and placed it onto some Recollections – Burgundy cardstock. Using my paper trimmer, I trimmed around the edges and them popped it up onto the background using 3M VHB – 2 sided tape to finish off the card.

Card Recipe:

Stamp: The Most Wonderful Gift Of All – D18038 – Dreamerland Crafts

Sentiment: Happiness Is Time Spent With A Good Friend – D20009 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark, Tim Holtz Distress Ink – Rustic Wilderness

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Carta Bella – Santa’s Workshop (12″ x 12″), Recollections – Burgundy

Die Cuts: My Creative Time – Rectangle Frame Layers, My Creative Time – Rectangle Frame Dies

Stickles: Diamond

Embossing Powder: Ranger – Clear Super Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug,  Marvy Heat Embossing Tool, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen, Xyron Create a Sticker, 3M VHB – 2 sided tape, Gelly Roll Sakura #5 Pen

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R22, R20 (Eyes – Sakura Glaze – Black pen, Gelly Roll Sakura #5 Pen)

Hair: E47, E44, E43, E41

PJ’s: B37, B14, B12

Bear: E57, E55, E53, E51, R22, R20 (Eyes and Nose – Sakura Glaze – Black pen, Gelly Roll Sakura #5 Pen)

Trees: YG67, YG17, G21, E23

Homes: B02, B00, C2, C1, C00, E23

Train: Y17, Y15, Y02, T7, T5, T3, T1, C2, C1, C00, R37, R35

Floor: E43, E42, E41

Wall: Y08, Y06, Y04

Floor Boards: C1, C0, C00, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Merry and Bright!!


Today, I’m sharing a light up Christmas card using Dreamerland Crafts stamps called Lets Decorate Our Home – D18037 and for the sentiment Holiday Sentiments Set 003. It’s never too early to start making Christmas cards and here’s hoping that this card will brightens someone’s day this coming Christmas.

To make this card I used a base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. For the background paper, I used my Cuttlebug and My Creative Time – Rectangle Frame Dies to die cut American Crafts – “Holiday” paper. The edges were inked with Tim Holtz Distress Inks – Peacock Feathers and then I adhered the background to the base card using double-sided tape. Using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto Copic Marker X-Press It Blending Card and coloured it in with Copic markers. I added some Stickles – Diamond to the pompom on the hat and fur at the top of the little girl’s boots. For the fluffy snow, I used Cosmic Shimmer Fluffy Stuff and sprinkled on some DecoArt Glamour Dust while it was still wet. Using my Marvy Heat Embossing Tool, I heated up the liquid for it to puff up and look like sparkling snow. I poked holes in the card where I wanted the blue lights to go. I applied some tissue paper over the holes on the back of the image to diffuse the lights. Using Versamark ink and my MISTI, I stamped the sentiment and then applied Ranger Embossing Powder White – Extra Fine Detail. This too was heated with my Marvy Heat Embossing Tool. Lastly, added some snowflakes using a Gelly Roll Sakura #10 Pen. I then set the coloured image aside.

It was now time to set up the bright blue lights for the house using Chibi Lights, copper tape and a battery. I cut out an another rectangle slightly smaller than the coloured image. Placing the coloured image over top of the smaller rectangle, I used a pencil for the placement of the lights on the roof. For the placement of the battery, I used the remote in the girl’s hands as a guide. After mapping out the route for the lights, I place the copper tape down and added 3 blue Chibi Lights to the “+” and “-” paths leading back to the battery. The set up was tested to make sure the lights would come on. Once this was completed, I used 3 layers of 3M VHB – 2 sided tape around the 3 sides of the battery to pop the image up high enough off of the card so that the battery would only light up the lights when someone pressed down on it. To keep the card even all the way around, I added 3 layers of 3M VHB – 2 sided tape to the remainder of the smaller rectangle. The image was then attached to the smaller rectangle. I added some double-sided tape to the back of the smaller rectangle and adhered it directly to the card to finish it off.

Card Recipe:

Stamp: Lets Decorate Our Home – D18037 – Dreamerland Crafts

Sentiment: Holiday Sentiments Set 003 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Peacock Feathers, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., American Crafts – “Holiday” 6″ x 6″ (15.2 x 15.2 cm)

Die Cuts: My Creative Time – Rectangle Frame Dies

Stickles: Diamond

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Forever in Time – Pop-Dot Tape, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust, Marvy Heat Embossing Tool, Sakura Glaze – Black, Gelly Roll Sakura #10 Pen, Chibi Lights

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20 (Eyes – Sakura Glaze – Black)

Hair: E47, E44, E43

Hat, Scarf and Boots: BG72, BG57, BG32, BG11

Coat: R59, R37, R35

Pants and Boot Soles: E25

Dog: E27, E25, E23 (Eyes and Nose – Sakura Glaze – Black)

Rabbit: E35, E33, E31 (Eyes and Nose – Sakura Glaze – Black)

House: E57, E55, E53, Y06, Y02

Roof: C5, C4, C3, C2, C1

Lights: Y17, Y02, B000

Snow: B60, B000, B0000, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust

Sky: B99, B97, B95

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Think Snow!!!


It’s Wednesday, and this week, I made a card using Snowman Stumble – TT014 by High Hopes Rubber Stamps for the main image and Think Snow 2 – FF047 (High Hopes Rubber Stamps) for the sentiment. I grew up skating at the outdoor rink directly across the street from my house. We couldn’t wait to get home from school and throw on our skates. The rinks were always full of children from the neighbourhood. We would either play rink games or hockey. I think there was a rink every couple of blocks. As soon as we’d finish eating, we were back on the ice again. Our parents were always yelling at us to come inside at the end of the day. How times have changed. LOL!

To make my card this week, I began with a card base made from Hammermill – Premium Colour 100 lb. cut and scored to be 5.5″ x 4.25″. My Cuttlebug and My Creative Time – Rectangle Frame Dies were used to die cut Hot Buy Craft Smart – Holiday Glitz Glitter Paper to be the same size as the base card. With a Picket Fence – Blending Brush and a mixture of Tim Holtz Distress Ink – Blueprint Sketch and Tim Holtz Distress Ink – Salty Ocean, I created the background sky. I applied this directly to the glitter background paper. Once this was done, I applied this directly to the base using double-sided tape. Next, Nellie’s Choice – Nature Scene Dies – NSD001 – Mountains were used to die cut the tree scenery using Momenta – Cardstock and using a small dauber I added in some darker touches of green using Tim Holtz Distress Inks – Peeled Paint. The pond was die cut using Whimsy Stamps – Wavy Nested Frame Dies Set and Copic Marker X-Press It Blending Card. I inked the image and sentiment using my MISTI and Memento – Tuxedo Black. Lastly, I die cut the sentiment using Joy Crafts – Labels and Tags and inked around the edges with my Picket Fence – Blending Brush and the ink that was still on it from doing the sky.

I coloured in the image with Copic markers and added in some highlights on the skate blades with Pental Sunburst Metalic Med Gel Pen. I inked the image a second time onto the Hot Buy Craft Smart – Holiday Glitz Glitter Paper for the snowman body and fussy cut around it. Once it was coloured in with Copics, I ran it through my Xyron Create a Sticker and attached it to the base stamped image.

The card was now ready to assemble. Part of the pond was cut off at the top before it was attached it to the sparkly background using glue and double-sided tape. Next, I added some 3M VHB – 2 sided tape to the back of the trees and applied it over top of where the sky ended and the pond met. To create the snow around the pond and in between the trees, pond and snow, I used Cosmic Shimmer Fluffy Stuff and added some DecoArt Glamour Dust while it was still wet. Marvy Uchida – Embossing Heat Tool was used to heat the liquid and make it puff up to look like fluffy snow. I added some Stickles – Diamond to the pompom. Using a Gelly Roll Sakura #10 Pen and Sharpie Water Based Paint – White – Extra Fine Point pen, I created the snow in the sky. Lastly, to finish off the card, I added 3M VHB – 2 sided tape to the sentiment and applied it to the card.

Card Recipe:

Stamp: Snowman Stumble – TT014 (High Hopes Rubber Stamps)

Sentiment: Think Snow 2 – FF047 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Momenta – Cardstock, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: My Creative Time – Rectangle Frame Dies, Nellie’s Choice – Nature Scene Dies – NSD001 – Mountains, Whimsy Stamps – Wavy Nested Frame Dies Set (WSD382), Joy Crafts – Labels and Tags

Stickles: Diamond

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Gelly Roll Sakura #10 Pen, Sharpie Water Based Paint – White – Extra Fine Point, DecoArt Glamour Dust, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool, Cuttlebug, Picket Fence – Blending Brush, Pental Sunburst Metalic Med Gel Pen, Xyron Create a Sticker

Image coloured with Copic Markers:

Snowman: B60, R30, R20, YR21, YR16, YR15, Colorless Blender

Hat: BG72, BG57, BG32, BG11, Gelly Roll Sakura #10 Pen

Mitts and Skates: C3, C2, C1, C00, BG09, BG05, BG02, BG01

Ice: B00, B000, B000

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

From All Of Us!!!


It’s Wednesday, and this week, I made a card using Fresh Baked – TT004 by High Hopes Rubber Stamps for the main image and From All of Us – FF046 (High Hopes Rubber Stamps) for the sentiment. Looks like Santa and my husband have one thing in common!! They both love cookies!!! Especially, when they are fresh baked out of the oven. LOL!

To make my card this week, I began with a card base made from Hammermill – Premium Colour 100 lb. cut and scored to be 5.5″ x 5.5″. I chose Echo Park Co. – Twas the Night Before Christmas for my background paper and trimmed it to be the same size as the card. I applied double-sided tape to it and adhered it directly to the base card. With my Cuttlebug and My Creative Time -Stitched Squares Inside and Out, I die cut the next 3 layers using Hot Buy – Craft Smart – Christmas Embossed, Green Cardstock and Copic Marker X-Press It Blending Card. I applied double-sided tape to the light green layer and attached it directly to the background layer. Then, I added some 3M VHB – 2 sided tape to the back of the Green Cardstock and applied that on top of the light green layer. I die cut the circle for the sentiment using some spare Hammermill – Premium Colour 100 lb. cardstock using My Creative Time – Bunch of Fun Circle Dies and the ornament pieces using My Creative Time – Fun Stitched Ornaments & More and some scrap Red Cardstock and Hammermill Cardstock. Using a
Pïlot Silver Marker – Medium Point pen, the top piece was coloured in.

The image and sentiment were then applied using my MISTI and Memento – Tuxedo Black ink. I coloured in the image with copic markers. Then I added Stickles – Diamond to the lady’s cuffs, dress trim, hat and collar and Stickles – Icicle to the man’s hat, pompom, collar, cuffs and trim on his coat. I also added this to the boy’s pompoms. Using the Pïlot Silver Marker – Medium Point pen, I traced around the outside of the circle for the sentiment.

Once everything on the image was dry, I applied double-sided tape to the back of it and applied the image to the top of the dark green layer. 3M VHB – 2 sided tape was added to the back of the sentiment and ornament ball. I assembled both pieces to the top of the card. Lastly, I added in some gold tinsel through the hole at the top of the ornament.

Card Recipe:

Stamp: Fresh Baked – TT004 (High Hopes Rubber Stamps)

Sentiment: From All of Us – FF046 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Echo Park Co. – Twas the Night Before Christmas – Volume 2 (12″ x 12″), Hot Buy – Craft Smart – Christmas Embossed (12″ x 12″), Hammermill – Premium Colour 100 lb.

Die Cuts: My Creative Time -Stitched Squares Inside and Out, My Creative Time – Fun Stitched Ornaments & More, My Creative Time – Bunch of Fun Circle Dies

Stickles: Diamond, Icicle

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Pïlot Silver Marker – Medium Point

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20

Hair: E15, Y38, Y21, YR23, E29, E25, E23, E21

Hats, Coat, Pants, Dress, Boots and Jewellery: R59, R37, R35, C1

Mitts, Belt and Boots: 100, W9, W7, W5

Apron, Boy’s Clothes and Hat: G99, G21, YG67, YG17

Cookies and Tray: C3, C2, C1, C0, E57, E53, E21

Flooring: E33, E29, E25, E23

Wall: G00, G000

Shadow Under Couple and Elf: C2, C1

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Good Times!!!


It’s Wednesday, and this week, I made a card using Joy Ride – TT002 by High Hopes Rubber Stamps for the main image and Good Times – GLL006 (High Hopes Rubber Stamps) for the sentiment. Christmas is always a wonderful time to gather with family and friends. Thinking of snow right now is also a way to cool down with all of this summer heat too! LOL!


 

To make my card this week, I began with a card base made from AC White Cardstock cut and scored to be 6″ x 6″. I chose Echo Park Paper Co. – My Favorite Winter (6″ x 6″) for my background paper and trimmed just a little off of the sides. Then, I used Tim Holtz Distress Ink – Blueprint Sketch and inked around all of the edges. I added some glue to the back of the paper and applied it to the base card. Using My Creative Time -Stitched Squares Inside and Out, I die cut a larger square from Recollections – Burgundy cardstock and a smaller square from Copic Marker X-Press It Blending Card. I inked around the edges of the larger square with Tim Holtz Distress Ink – Aged Mahagony and applied 3M VHB – 2 sided tape to the back of it and applied to the background. I die cut the sentiment label with My Creative Time – Stitched Rectangular Frames Dies and More. The image and sentiment were then applied using my MISTI and Memento – Tuxedo Black ink. I applied Stickles – Unicorn around the edges of the label and set it aside to dry.

I coloured in the image with copic markers. Then I added Stickles – Eucalyptus to the lady’s cuff and collar and Stickles – Crystal to her hat and pompom. For the man, I applied Nuvo Glitter Accents – Fresh Snowfall to his hat and pompom. Lastly, I added some Brutus Monroe – Snow Paste using a spatula to the bottom outer edge of the image to represent a snow bank on the side of the road. Using a Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Glitter Glue Pen and DecoArt Glamour Dust, I created the snowy background. Gelly Roll Sparkle Pen was used to colour in the Holly on the wreath.

Once everything on the image was dry, I applied some glue to the back of it and applied it directly on top of the larger square. I applied some glue and some 3M VHB – 2 sided tape to the sentiment and applied that on an angle at the top of the card. I only put the tape in a few spots so that it would be the same height as the image. To finish off the card, I added some CC Designs – Dragon Dreams Enamel Dots on to the sentiment and some sequence.

Card Recipe:

Stamp: Joy Ride – TT002 (High Hopes Rubber Stamps)

Sentiment: Good Times – GLL006 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Aged Mahagony, Tim Holtz Distress Ink – Blueprint Sketch

Paper: Copic Marker X-Press It Blending Card, AC White Cardstock, Echo Park Paper Co. – My Favorite Winter (6″ x 6″), Recollections – Burgundy

Die Cuts: My Creative Time -Stitched Squares Inside and Out, My Creative Time – Stitched Rectangular Frames Dies and More

Stickles: Eucalyptus, Crystal, Unicorn, Nuvo Glitter Accents – Fresh Snowfall

Paste: Brutus Monroe – Snow Paste

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Gelly Roll Sparkle Pen, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Glitter Glue Pen, CC Designs – Dragon Dreams Enamel Dots.

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20

Hair: E15, Y38, Y21, YR23, E29, E25, E23, E21

Hats, Jacket, Wreath: R59, R37, R35

Mitts, Jacket and Tie: G28, G24, G21

Pants: W9, W7, W5

Boots and Gloves: E27, E25, E23, E21

Bike and Wheels: C9, C7, C5, C4, C3, C2, C1, Y17, Y11, Y08, R59, R37, R35

Holly: G14, G07, YG03

Puffs of Smoke: B60, C1, C00

Sky: B99, B97, B39, B37, B29, B28, B26

Road: T7, T5, T3

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Happiness


Hi Everyone! It’s the new year and it’s never too early to start making your Christmas cards. Today, I’m featuring a Christmas card from Dreamerland Crafts new Christmas release called Happiness Is Time Spent With A Good Friend – D20009.

To create this card, I first stamped my images using my MISTI and Memento – Tuxedo Black ink.  The images were coloured in with Copic markers. Then I fussy cut around them and went around the edges with a black marker and set them aside.

Next, I worked on the background. I cut Hammermill – Premium Colour 100 lb. to the size of 4.25″ x 5.5″. I created the sky using the Tim Holtz inks listed below and then added in some snow using Stamperi – Glamour Paste – Sparkling White and sprinkling on some Martha Stewart Crafts – Crystal Fine Glitter while it was still wet. I then set this aside to dry. Once the paste was dry, I stamped the sentiment using VersaMark ink. The sentiment was embossed with Ranger Embossing Powder White – Extra Fine Detail and Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

The bench was die cut using Joy Crafts – Floral Flourishes – 6002/0191, my Cutttlebug and Tim Holtz – Idea-ology – Christmas paper. Shadows were added in using T5 Copic Marker. I created a base card using Hammermill – Premium Colour 100 lb. to the size of 4.25″ x 5.5″. I added double-sided tape to the coloured background and adhered it directly to the base. Using double-sided tape, I added the bench to the background. I popped up the images on the bench using 3M VHB – 2 sided tape. The snow and stars were added in using a combination of Gelly Roll Sakura #8 Pen and Gelly Roll Sakura #10 Pen. Sequins was added from some mixed sparkles I had.

To finish off the card, I added in some Cosmic Shimmer – Fluffy Puff around the bottom of each of the legs of the bench and also onto the trim of the girl’s cape, kitten’s cape and pompom. Lastly, I added some Stickles – Diamond onto the snow and the girl’s cape for added texture.

Card Recipe:

Stamp and Sentiment:  Happiness Is Time Spent With A Good Friend – D20009 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink: Black Soot, Blueprint Sketch, Chipped Sapphire, Salty Ocean, Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Tim Holtz – Idea-ology – Christmas

Glitter \ Snow: Stamperi – Glamour Paste – Sparkling White, Stickles – Diamond, Cosmic Shimmer – Fluffy Puff

Die Cuts: Joy Crafts – Floral Flourishes – 6002/0191

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #10 Pen, 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000, R22, R20, Eyes – Sakura Glaze – Black, Gelly Roll Sakura #8 Pen

Hair: E47, E44, E43

Cape and Dresses:  BG72, BG57, BG34, BG11

Pants: T7, T5, T4, T3

Boots: E55, E50, E29, E27, E25, E23

Kitty: T7, T5, T3, R20, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen

Hat and Antlers: C2, R39, R37, R35

Sky: Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #8 Pen,

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Little Cup of Cocoa


Coffee Loving Cardmakers is currently hosting the 2020 Fall / Winter Coffee Lovers Blog Hop! For my Fourth entry into this hop, I chose this loveable snowman in a hot tub of Cocoa called Snow Yummy – S182  by High Hopes Rubber Stamps. For the sentiments I used High Hopes Rubber Stamps, Cup of Cocoa – M009 and Holiday All Year – H200.

The image was stamped with Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card using my MISTI to give me a nice clean image. The image was coloured with copic markers and then I fussy cut around it. I used a black marker to go around all of the edges where I had cut out the image.

I cut Hammermill – Premium Colour 100 lb. paper to be 4.25″ x 11″. Then I scored the paper at 5.5″ and again at 8.25″. (2.75″ from the original score line). I cut another piece of the cardstock at 4.25″ x 5.5″ to be the front panel. I then cut Stampin’ Up – Snowflake Splendor Designer Series Paper to be 4.25″ x 5″ and used double-side tape to place it directly to the front panel piece. Hot Buy Craft Smart – Holiday Glitz Glitter Paper was used to create the snow. I cut it 4.25″ wide and then just tore a piece across the width to create the shape. I used double-sided tape to adhere this directly to the bottom of the front panel.

The sentiments were then added with Versa Fine – Onyx Black and embossed with Ranger – Clear Super Fine Detail embossing powder. This was then heat set with Marvy Uchida – Embossing Heat Tool. To create the rectangles, I used  My Creative Time – Rectangle Frame Layers  for the patterned paper and My Creative Time – Rectangle Frame Dies for the background rectangle using Hot Buy – Recollections – Jewel Tones. Next, I ran the small sentiment and the coloured image through my Xyron Creative Station to create stickers out of them. This made it easer to adhere the larger image to the background and the smaller sentiment to the larger rectangle.

The card was now ready to assemble. I applied double-sided tape to only the lower half of the scored card and then placed the finished scene panel onto it. I cut another piece of patterned paper at 4-1/8″ x 3″ and adhered it the lower half of the inside card. Then I popped up the sentiment using 3M VHB – 2 sided tape. I added some Wink of Stella – Clear  to the snowman to make him sparkle and Gelly Roll Stardust – Clear and the Wink of Stella – Clear to the large snowflake on the mug. Lastly, I added some Stickles – Diamond to add some texture to the snow.

Card Recipe:

Stamp: Snow Yummy – S182 (High Hopes Rubber Stamps)

Sentiments: Cup of Cocoa – M009 (High Hopes Rubber Stamps)Holiday All Year – H200 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Stampin’ Up – Snowflake Splendor Designer Series Paper, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: My Creative Time – Rectangle Frame Layers, My Creative Time – Rectangle Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Xyron Creative Station, Wink of Stella – Clear, Stickles – Diamond

Image coloured with Copic Markers:

Snowman: B60, BG000, YR18, YR14, Y08, C9, N8, N5, R30, R27, R24, R22, R20, Colorless Blender, Wink of Stella – Clear

Mug and Hot Cocoa: E23, E25, E27, B37, B14, B12, Wink of Stella – Clear and Gelly Roll Stardust – Clear

Hat and Scarf: C9, C7, C5, R59, R39, R37, R35

Hope you like it and have a great week!

Musical Penguin Parade


Hi There! Today I’d like to share a Christmas Card I made using Top Hat Penguin – RLF005 (High Hopes Rubber Stamps), Trumpet Penguin – RLF006 (High Hopes Rubber Stamps) and Flute Penguin – RLF002 (High Hopes Rubber Stamps). Musical Wishes – GLL014 (High Hopes Rubber Stamps) was chosen for the sentiment. I just love these adorable penguins and couldn’t resist putting them all together to create a musical penguin parade. LOL!

To make my card this week, I used Recollections – White cardstock for the base card which is 7.25″ x 7″. I scored the paper at 3.5″ to create the dimensions of 7.25″ x 3.5″. The red background was cut to the same size using Crafter’s Companion Luxury Cardstock – Red. The musical notes layer was cut from Craftsmart – Classic Village at 7″ x 3.25″. The snowy background was die cut to the same size in length using Recollections – Christmas Inkjet Printable Glitter Paper. I used My Creative Time – Tall Frame Dies, My Creative Time – Tall Frame Layers in order to achieve this. Once the snowy background paper was die cut, I tore along it in order to create the illusion of white snow drifts along the top of the snow. I adhered all of the layers with double-sided tape. Using my large Misti, I stamped the sentiment using Versa Fine – Onyx Black and embossed it with Ranger – Clear Super Fine Detail embossing powder. Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

I stamped all of the images onto Copic Marker X-Press It Blending Card using my Misti and Memento – Tuxedo Black ink. The images were then all coloured in with Copic markers and die cut using my Brother Scan and Cut machine. Then I ran all of the images through my Xyron Creative Station to make them all stickers. I placed them on the card and then used Stickles – Diamond to create some snow drifts. Clear – Wink of Stella was added to the Candy Cane to make it sparkle and also to all of the leaves and holly on the hats.

To complete the card, I edged all around the scene with Stickles – Sea Glass.

Card Recipe:

Stamp:  Top Hat Penguin – RLF005 (High Hopes Rubber Stamps), Trumpet Penguin – RLF006 (High Hopes Rubber Stamps), Flute Penguin – RLF002 (High Hopes Rubber Stamps)

Sentiment Background: Musical Wishes – GLL014 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, Hot Buy Craftsmart – Classic Village – 12″ x 12″ paper, Crafter’s Companion Luxury Cardstock – Red – 8.5 x 11″

Die Cuts: My Creative Time – Tall Frame Dies, My Creative Time – Tall Frame Layers

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug,  Xyron Creative Station, Stickles – Sea Glass, Stickles – Diamond, Clear – Wink of Stella, Marvy Uchida – Embossing Heat Tool

Images coloured with Copic Markers:

Penguin Bodies: W9, W7, W5, W3, E15, Y17, YR16, YR15, E43, E42, E41, E40, R11, RV00, Colorless Blender, White Prismacolor Premier Pencil

Top Hats: C9, C8, C6, C3

Scarfs and Hat Bands: BG78, BG75, BG09, BG07, BG02

Vest and Mouse: R59, R39, R37, R24, C3, C1

Horn and Flute: E97, E23, Y17, Y15, Y11

Holly and Leaves: YG97, YG95, YG01, G21, R39, R24

Bird: Y19, Y15, Y11, YR15

Candy Cane: R37, R35, C1, C0, Colorless Blender, Clear – Wink of Stella

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Sending Warm Hugs


Sharing a card I made today for a challenge using Super Cool Pals  from Kraftin’ Kimmie Stamps. I really love anything Christmas and winter related and who couldn’t resist this adorable snowman and little fox?

To make my card, I started out by stamping the image using my MISTI and Memento Tuxedo Black ink onto Copic Marker X-Press It Blending Card. I coloured the image with Copic markers and then fussy cut around it. I die cut the background paper using My Creative Time – Rectangle Frame Dies. It’s from Stampin Up’, but I received it in a Mystery Box, so I’m not sure what paper pack it comes from. Then I tore up some Recollections – Christmas Inkjet Printable Glitter Paper and taped it to the bottom of the panel.

The snowflake was die cut using Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″ and Tim Holtz – Sizzix Thinlets – Paper Snow Flakes. I ran the paper and my finished coloured image through my Xyron Creative Station and also the Holiday Glitz paper was put through it as well before I die cut it. This allowed me to make stickers out of both items. For the sentiment, I used my MISTI, Versa Fine – Onyx Black and then embossed it with Ranger – Clear Super Fine Detail embossing powder. This was then heat embossed with my Marvy Uchida – Embossing Heat Tool. Once this was done, I die-cut the sentiment with Lifestyle Crafts Cutting Dies – Nesting Circles and edged all around it with Kraftin’ Kimmie – Lovely Lagoon Ink. I also edged all around the snowy background with the same ink.

For the assembly, I started out using the base from Recollections -Christmas Cards and Envelopes set at 5.5″ x 4.25″. Using double-sided tape, I  adhered the snowy background to the base. Then I added my main image and snowflake. The sentiment was popped up using some 3M VHB – 2 sided tape and Stickles – Diamond glitter was added to parts of the snow to finish the card off.

Card Recipe:

Stamp and Sentiment: Super Cool Pals (Kraftin’ Kimmie Stamps)

Inks: Memento – Tuxedo Black, Kraftin’ Kimmie – Lovely Lagoon Ink, Versa Fine – Onyx Black

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Recollections – Christmas Cards and Envelopes Set, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Die Cuts: Tim Holtz – Sizzix Thinlets – 661599 – Paper Snow Flakes, Lifestyle Crafts Cutting Dies – Nesting Circles, My Creative Time – Rectangle Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool, Stickles – Diamond, Xyron Creative Station

Image coloured with Copic Markers:

Fox: E99, E97, E15, E08, C2, C1, C0, R24, R02, R00

Snowman: C0, BV20, B000, R08, YR18, YR16, YR14

Vest: BG49, BG45, BG34, BG32

Hat and Flower: BG49, BG45, BG34, BG32, C10, C8, C6, R39, R37, R35, G07, G05

Scarf: G09, G07, G05, R59, R39, R37, R35

Hope you like it and have a great week!

Gnome For the Holidays


It’s Wednesday, and this week, I used Snowy Gnome – TLF024 (High Hopes Rubber Stamps) for the main image from the new August 2020 release and From Our Gnome – GLL001 (High Hopes Rubber Stamps) for the sentiment. This little gnome has gone home for the holidays to celebrate with friends and family. As you can see there are a lot of activities going on in Gnome Town. This little gnome has his snowballs ready for the next snowball fun fight! LOL! While waiting for the other team to get ready, he’s decided to take a little break and enjoy nature with his little cardinal friends. Then, let the fun begin!!!

To make my card this week, I started out with a simple white card base, sized at 6″ x 6″. I cut some dark blue cardstock, just slightly smaller and adhered it to the card with Tombow Mutli-Liquid Glue. I just love this paper from PhotoPlay called Gnome for the Holidays Christmas. I thought it went perfectly with this new stamp. I cut it at about 5.75″ x 5.75″. Then I glued it to the blue paper.

I die cut multiple circles in a variety of sizes using a mixture of My Creative Time – More Stitched Circles and Lifestyle Crafts Cutting Dies – Nesting Circles using dark blue and red cardstock and also Copic Marker X-Press It Blending Card for the main image.

The image was stamped onto the Copic Marker X-Press It Blending Cardstock circle using my MISTI and Memento – Tuxedo Black. It was then coloured it in with Copic markers. For the snow, I used Recollections – Christmas Snow Paste, Martha Stewart Crafts Glitter – Crystal Fine and a spatula and let it dry overnight. Then  Stickles – Diamond was added onto the top of it. For the sky a mixture of 2 Gel pens were used and then a little bit of Stickles – Diamond to add some glitter to it. I was trying to get it to match the background paper. Once the Stickles was dry, I glued the bottom 2 layers of circles together and then the top 2 circles.  Both were done separately. The sentiment was stamped with Versa Mark and then embossed with Ranger Embossing Powder White – Extra Fine Detail and heated with Marvy Uchida Embossing Heat Tool. I fussy cut around the sentiment and glued it directly on top of some red cardstock. Then I cut around that as well.

To complete the card I popped up the bottom circles, top circles with coloured image and sentiment with the 3M VHB – 2 sided tape.

Lastly, I added some more sparkle with Stickles – Diamond by adding it to the base of the card in random places.

Card Recipe:

Stamp: Snowy Gnome – TLF024 (High Hopes Rubber Stamps)

Sentiment: From Our Gnome – GLL001 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Versamark

Paper: Copic Marker X-Press It Blending Card, PhotoPlay – Gnome for the Holidays Christmas, AC White Cardstock Dark Blue Cardstock, Red Cardstock

Die Cuts: My Creative Time – More Stitched Circles MCT-D136, Lifestyle Crafts Cutting Dies – Nesting Circles

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Stickles – Diamond, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20

Beard: W5, W4, W3, W2, W1, W0, W00

Shirt, Hat and Berries: R59, R37, R35, R24, R22, Stickles – Diamond, Gelly Roll Sakura #8 Pen

Pants, Leaves and Mitts: G99, G94, G21, YG03

Shoes: C9, C7, C5

Cardinals and Scarves: R59, R37, R35, R24, R22, C7, C5, C3, YR16, YR12

Snowballs: BV23, BV20, Stickles – Diamond

Sky: B16, B14, B12, Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #10 Pen, Stickles – Diamond

Ground: Recollections – Christmas Snow Paste, Martha Stewart Crafts Glitter – Crystal Fine, Stickles – Diamond

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Winter Birthday Wishes!


Sharing a card that I made for my sister-in-law. I was so happy when Polkadoodles came out with this new release for Winnie Winter Celebrations.

The stamp that I used to create this card is called Birthday Gifts – Winnie Winter Celebration (Polkadoodles).

I printed out the image on Copic Marker X-Press It Blending Card using Grayscale. By using Grayscale, your image won’t smudge when you go to colour it in. I coloured the image using Copic markers and then used Gelly Roll Sakura #10 Pen to create the snow in the sky and
Stickles – Diamond to create some texture in the snow.

For the squares die cutting, I used My Creative Time – Stitched Squares Inside and Out. I really love the colour combos of Recollections – Northern Lights paper pad. I popped up the cut out frame and coloured image using 3M VHB – 2 sided tape. Lastly, I die cut some snowflake borders using Snowflake Border Die (#YourNextStamp) and then just used glue on 1 half of each side of the snowflakes and then mounted them onto the paper. Lastly, I added some small purple gems into the centre of each snowflake and some larger purple perls to the top and bottom of the card to finish it off.

Card Recipe:

Stamp: Birthday Gifts – Winnie Winter Celebration (Polkadoodles)

Paper: Copic Marker X-Press It Blending Card, Recollections – Northern Lights – 6″ x 6″ (15.2 cm x 15.2 cm)

Die Cuts: Snowflake Border Die (#YourNextStamp), My Creative Time – Stitched Squares Inside and Out

Embellishments: Crafts – Self-adhesive Pearls (02-3006207), Nuo Ying Sticker – Rhinestone Selection, Stickles – Diamond, Gelly Roll Sakura #10 Pen

Image Coloured With Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20

Eyes: Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Hat, Scarf, Coat, Boots: V09, V06, V04, V01, BG18, BG15, BG11, BG01, BG000, C5, C3, C1

Bird: E37, E35, E34, YR14, Y19

Squirrel: E57, E55, E53, E51, E50, R30, R02, C01, C0, Colorless Blender, Sakura Glaze – Black

Present and Bow: BG18, BG15, BG11, E15, Y38, Y19, Y08, Gelly Roll Stardust – Clear

Envelope: E41, E40, Colorless Blender

Holly Leaves: G99, YG67, YG17, G21

Candy Canes: R59, R37, R35, Gelly Roll Stardust – Clear

Ribbon: R27, R24, R22

Sky: B29, B28, B26, B24, B23, B21

Snow: BV20, C0, Colorless Blender

Snowflake: Gelly Roll Stardust – Clear

Penguins Visit Santa


Sharing a card that I made using Penguins Visit (Di’s Digi Stamps). I just thought this stamp was so adorable and loved the little scene.

Stamp: Penguins Visit (Di’s Digi Stamps)

Sentiment: New Christmas Seals (Kraftin Kimmie Stamps)

Inks: Memento – Tuxedo Black, Versamark, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Hot Buy Craft Smart – Cute and Cozy Christmas 12″ x 12″, Recollections – Christmas Plaids – 6″ x 6″ (15.2 cm x 15.2 cm), Lawn Fawn – Snowy Day Remix – 6″ x 6″ (15.2 cm x 15.2 cm)Lawn Fawn – Snowy Day Remix – 6″ x 6″ (15.2 cm x 15.2 cm)

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Sizzix Tim Holtz Alterations Snowflakes, Amy Design – Dies – Keep It Cool – Cool Square Frame

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Image Coloured with Copic Markers

Skin:  E21, E11, E04, E00, E000

Beard, Trim, Pompoms: W1, W0, Colorless Blender

Santa’s Coat, Pants and Hat: R39, R29, R27, R24, Stickles – Diamond

Santa’s Bag and Mittens: G82, G29, G28

Boots: W9, W5, W2

Penguins: W9, W5, W2, YR14, Y17, Y15, E43, E41, Colorless Blender

Penguin Hat: BG49, BG45, BG32, Glitter Glue – Aqua

Presents and Bows: BG49, BG45, BG32, BG07, BG05, BG02, E15, Y19, Y17, Y15, R59, R37, R35

Igloo: BV20, C0, Colorless Blender, Wink of Stella – Clear

Sky: B39, B37, B34, Gelly Roll Sakura #10 Pen

Snow: Stickles – Diamond

Hope you like it!

Merry Christmas and Happy New Year Everyone!

Our Friendship is Magic!


Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and for my last High Hopes card for the year, I’m sharing a couple of good friends just relaxing and taking it easy! Sometimes it is nice to just chill out a bit! LOL! The stamp for the main image is called South Pole Pals R147 (High Hopes Rubber Stamps).

To make my card, I decided to keep it simple. I cut out the frame using Amy Design – Dies – Keep It Cool – Cool Square Frame and Copic Marker X-Press It Blending Card. Next, I stamped the image using my MISTI into the centre of the die cut. I coloured this in with the Copic markers listed below. For the outside of the die cut, I used Tim Holtz Distress Inks – Broken China and sponged on the ink using a dauber.

To create the background for the main image, I re-stamped the main image onto Inkadoo Stamping Mask Paper and fussy cut it out. Then I placed the mask over my coloured image. Next I used a mixture of Tim Holtz Distress Oxide inks, Faded Jeans, Wilted Violet and Festive Berries to create the sky. I have never tried this before, and just love the way it turned out.

For the snow, I stamped the bottom of the image with VersaMark ink and then added WOW! Embossing Glitter – White Puff Twinkle. I heated up the embossing powder with my heat gun and then added some Stickles – Diamond along the top of the snow.

Next I assembled the card onto 5.5″ x 5.5″ white AC Cardstock. I cut out a piece of 5.5″ x 5.5″ Hot Buy Craft Smart – Holiday Glitz Glitter Paper and mounted it with 2 sided tape onto the base. Then I added glue to the back of the frame and centre previously cut and coloured with Zig 2 Way Glue and mounted it onto top of the card.

Lastly, I added the sentiment Magic Friendship F234 (High Hopes Rubber Stamps) and popped it up with 3M VHB – 2 sided tape to finish up the card.

Card Recipe:

Stamp:  South Pole Pals R147 (High Hopes Rubber Stamps)

Sentiment: Magic Friendship F234 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Oxide Festive Berries, Tim Holtz Distress Oxide Faded Jeans, Tim Holtz Distress Oxide Wilted Violet, Tim Holtz Distress Inks – Broken China, Versamark

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cut: Amy Design – Dies – Keep It Cool – Cool Square Frame

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Inkadoo Stamping Mask Paper

Embossing Powder: WOW! Embossing Glitter – White Puff Twinkle

Image coloured with Copic Markers:

Penguin: W9, W7, W5, E15, YR14, Y17, Y15, Y11, E45, E43, E41, Colorless Blender

Polar Bear: W9, W2, W1, W0, R30, R20, Colorless Blender

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Walking in a Winter Wonderland


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a card with you that I made using DCS19089 – Mix and Match Clear Stamp  (Dreamerland Crafts Clear Stamps) for the main image and sentiment and 2018 Christmas Trees & Houses – M18312 (Dreamerland Crafts Clear Stamps) for the trees in the background! I thought this little bear was just so adorable, so I thought I would make him pulling his little forest friend on a little walk through the forest!

I used the centre die cut from Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background – CED3049 to cut out the area I wanted to stamp my image on. I used Copic Marker X-Press It Blending Card, Memento – Tuxedo Black ink and my MISTI to get a nice clean image. The first step was to stamp the bear, sled and bunny. Next I used Inkadoo Stamping Mask Paper and stamped the 3 images again. Next, I added the masked images over top of the images that were previously stamped on the base image.

The second step was to stamp in the trees. I wanted to give the impression that some trees were further back, so I inked the tree stamp with Memento – Bamboo Leaves and stamped once and then immediately again using the same stamp. I performed this several times across the background. Once all of the trees were in place, I removed the masking and was ready to colour in my images.

Before adding snow to the sky, I stamped on the sentiment using VersaMark ink and Ranger Embossing Powder White – Extra Fine Detail. Then I added in the snow flakes using Gelly Roll Sakura #8 Pen.

The colours used for each character and the trees are listed below. The final step for the main image was to add in some sparkle on the trees and snow on the ground. For the glitter on the trees I used Quickie Glue and DecoArt Glamour Dust. For the snow below the trees, sled and bear, I used VersaMark ink and WOW! Embossing Glitter – White Puff Twinkle and touches of Stickles – Diamond.

Lastly, I die cut the background frame using Recollections – Christmas Inkjet Printable Glitter Paper and Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background. I added glue to the back of the die cut and mounted it on top of Crafts Sparkling Stickers – 02-3068629. Then I popped up the main image in the centre using 3M VHB – 2 sided tape.

Card Recipe:

Stamps: 2018 Christmas Trees & Houses – M18312 (Dreamerland Crafts Clear Stamps), DCS19089 – Mix and Match Clear Stamp (Dreamerland Crafts Clear Stamps)

Sentiments: DCS19089 – Mix and Match Clear Stamp (Dreamerland Crafts Clear Stamps)

Inks: Memento – Tuxedo Black, Memento – Bamboo Leaves, Memento – Rich Cocoa, VersaMark ink

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, WOW! Embossing Glitter – White Puff Twinkle

Paper: Copic Marker X-Press It Blending Card, Crafts Sparkling Stickers – 02-3068629, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Die Cuts: Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background – CED3049,

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Inkadoo Stamping Mask Paper, Stickles – Diamond

Image coloured with Copic Markers:

Bear: E57, E55, E53, E39, E37, E35, E34, R59, R37, R35, Sakura Glaze – Black (Nose and Eyes), Gelly Roll Sakura #5 Pen

Bunny: E57, E55, E53, E51, R20, R00, Sakura Glaze – Black (Eyes), Gelly Roll Sakura #5 Pen

Sleigh: R59, R37, R35, C3, C2, C1, E39, E37, E35

Trees: BG96, YG67, YG17, G21, G20, G00, G0000

Background Sky: B99, B97, B95, B93, B91

 

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Nordic Night Snowy Delight!


Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and today I’m sharing a card that I made using the image Nordic Snowman with Bird (TLF010) (High Hopes Rubber Stamps) from our latest Christmas release. I just love the serenity of this image.  I grew up in Northern Canada and have always loved snow. It’s always so beautiful watching it come down from the sky. Not so much fun when you have to shovel it or drive through a snow storm, but other than that, it is quite beautiful! LOL! Did you grow up where there was a lot of snow too?

To make my card, I first stamped the image using Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card. Then I ran the stamped image through my Cuttlebug and die cut it with Craftin Desert Diva’s Fancy Frames.

I decided to colour in the sky first with various blue Copic markers. After I coloured in the sky, I added in the falling snow using Gelly Roll Sakura #10 Pen.

I thought the sweater looked Scandinavian, so I decided to colour it similar to some Scandinavian  sweaters that I’ve seen in the past. I used Sakura Glaze – Black pen to pop up the eyes and smile on the snowman and lastly added some Stickles – Diamond for the pom-poms on the hat and along the top of the snow on the sweater. I also coloured over top of the black snowflakes with Gelly Roll Sakura #10 Pen and Gelly Roll Sakura #5 Pen on the sweater and hat.

For the snow at the bottom of the snowman, I used the same die-cut, Craftin Desert Diva’s Fancy Frames, to cut out the base using Recollections – Christmas Inkjet Printable Glitter Paper. I then ran this same paper through my Cuttlebug again, this time using the die cut from Lawn Fawn – Stitched Hillside Borders. Next I popped it up on the image using 3M VHB – 2 sided tape.

I die-cut some patterned paper using Your Next Stamp – Stitched Rectangle Die Set (YNSD214) that I had in my stash and then popped up the coloured snowman image onto it using 3M VHB – 2 sided tape.

For the sentiment I used Winter Delight (G114) (High Hopes Rubber Stamps). I stamped the sentiment and then die-cut it out using Craftin Desert Diva’s – Tag Essentials Dies. Then I went around the border of the die-cut with Gelly Roll Stardust – Clear pen and drew in some small snowflakes.

I then die-cut some snowflakes using Poppy – Simple Snowflakes (Style 1931) from Recollections – Christmas Inkjet Printable Glitter Paper. Once the snowflakes were all cut out, I ran them through my small Xyron to make them into stickers.

To assemble the card, I started with a base of 6″ x 6″ white AC cardstock. Next I mounted American Crafts – Wonderland Collection paper for my background. I chose this particular pattern as I thought it matched the image so well. I attached the mounted snowman directly to the background paper using 2-sided tape. I popped up my sentiment using 3M VHB – 2 sided tape. Added my snowflakes and then finished off the card by adding in little gems in the centre of each snowflake and 1 on the sentiment.

Card Recipe:

Stamp:  Nordic Snowman with Bird (TLF010) (High Hopes Rubber Stamps)

Sentiment:  Winter Delight (G114) (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, AC Cardstock – White,

Die Cuts: Poppy – Simple Snowflakes (Style 1931), Craftin Desert Diva’s – Tag Essentials Dies, Craftin Desert Diva’s Fancy Frames, Lawn Fawn – Stitched Hillside Borders, American Crafts – Wonderland Collection – 6 x 6″ (15.2 x 15.2 cm) paper pack

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Gelly Roll Stardust – Clear pen, Xyron, Forever in Time – Round Gemstone Stickers, Rhinestone Selection – Dress Up Sheet – Red, Stickles – Diamond,

Image coloured with Copic Markers:

Night Sky: B99, B97, B37, B34, B32, B29, B24, B21, Gelly Roll Sakura #10 Pen

Moose: E27, E25, E23, E35, E33

Snowman: E27, E25, E23, YR18, YR16, YR14, YR12, Y15, BV20, C0, Colorless Blender,

Sweater and Hat: R59, R37, R35, C4, C3, C2, E41, E40, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Stickles – Diamond

Scarf: YG67, YG17, G21, R59, R37, R35

Cardinal: R59, R37, R35, Y17, Gelly Roll Sakura #5 Pen

Tree \ Holly Leaves: G99, YG67, YG17, G21, R59, R35

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.