Archives

Trick or Treat!


It’s the last day of the 2022 Cat Lovers Hop and today I’m sharing a CAS Hallowe’en card I made using Lawn FawnGiant Trick or Treat for the sentiment and Spellbinders – Die D-Lites Kitty Cats Etched Dies. Happy Hallowe’en everyone and happy hopping!

 

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background to be the same size using DCWV Happy Haunts cardstock.and adhered it directly to the base using double-sided tape. Using Tim Holtz Distress Ink – Villainous Potion and a finger dauber, I inked around all of the edges of the card and put a few coats onto the bottom of the card. With my Cuttlebug, I die cut the sentiment 4 times and the kitty cats once. Using liquid glue, I adhered each of the sentiments together and then applied it to the card. I applied 2 layers of U-Line double-sided tape to the backs of the cats and a touch of glue and added them to the card.

Card Recipe:

Inks: Tim Holtz Distress Ink – Villainous Potion

Die Cuts: Lawn FawnGiant Trick or TreatSpellbinders – Die D-Lites Kitty Cats Etched Dies.

Paper: Hammermill – Premium Colour 100 lb., DCWV Happy Haunts (6″ x 6″), Orange and Purple Cardstock

Hope you like it and have a great week!

 

Meowy Christmas!


It’s the last day of the 2022 Cat Lovers Hop and today I’m sharing a Christmas card I made using Gerda Steiner Designs –  Deck The Halls – GSD438. I thought this image was adorable! Have fun hopping everyone!

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background to be the same size using Wild Rose Studio – Winter Bauble Paper and adhered it directly to the base using double-sided tape. Using Tim Holtz Distress Inks – Tumbled Glass and a finger dauber, I inked around all of the edges of the card. With my Cuttlebug and Hero Arts – Infinity Dies – Ornaments, I die cut a large ornament from Copic Marker X-Press It Blending Card cardstock and the ribbon and topper from a scrap piece of gold cardstock.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock and with Versafine – Majestic Blue, I stamped the sentiment onto the base card. I embossed the sentiment with Ranger – Clear Super Fine Detail embossing powder and then heat set it with a Marvy Uchida – Embossing Heat Tool. The image was coloured in with Copic markers and with a Gelly Roll Sakura #8 Pen designs were added to the ornaments and light bulbs. I tried to create the ornament as close to the paper as I could. Once this was completed, using liquid glue, I attached the top piece and the bow to the ornament. U-Line double-sided tape was added to the back of ornament die cut and it was popped up onto the background. With a Gelly Roll Sakura #8 Pen, I added in some string for the bauble.

Card Recipe:

Stamp and Sentiment:  Deck The Halls – GSD438 – Gerda Steiner Designs

Inks: Memento – Tuxedo Black, Versafine – Majestic Blue, Tim Holtz Distress Inks – Tumbled Glass

Die Cuts: Hero Arts – Infinity Dies – Ornaments (D1400)

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Wild Rose Studio – Winter Bauble Paper (6″ x 6)

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Miscellaneous: U-Line – 2-sided tape, Gelly Roll Sakura #8 Pen, MISTI (Most Incredible Stamping Tool), Marvy Uchida – Embossing Heat Tool,

Image coloured with Copic Markers:

Kitten: T9, T7, T5, T3, R30, R22

Large Ornament: BG09, BG05, BG02, BG01, Y11, Y00, YG00, Gelly Roll Sakura #8 Pen

Baubles: BV11, BV02, BV00, BV000

Lights and Wire Cord: R14, RV42, G07, YG07, YG01, B06, B04, B000

Hope you like it and have a great week!

Also entered into:

https://gsd-stamps.com/blogs/share-your-designs/play-along-in-november-22-challenge

 

Birthday Celebration!!


Today, I’m sharing a miniature birthday card that I made using Dreamerland Crafts stamps called Meow Meow 01 – D20013 for the main image and for the sentiments Birthday 07 – DCS17058 and Birthday 08 – DCS17059. I always wanted to try this type of miniature card! I just love the way you get the 3-D effect when you open the card.  So much fun. LOL!

Inside the card:

To make this card I used Lawn Fawn – Centre Picture Window Card to create the base card out of Hot Pink cardstock. The same dies were also used to create the centre pieces and banner using Your Next Stamp Designer Paper Pad – Birthday Girl. The same paper was also used to create the background on the card, front panel and side panels using Lawn Fawn – Centre Picture Window Card Add-On dies. Your Next Stamp – Mini Balloon Trio Die Set was used to die cut the floating balloons and then I tied some black thread to the base of the balloons. I cut 3 small pieces of clear plastic about a 1/4″ wide and attached the double-sided tape to the back of the balloon and at the base of the plastic as well to be used later.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card and also the sentiments onto the patterned pieces. I coloured the image in with Copic markers and then fussy cut around it.

I assembled the card using double-sided tape for each of the panels and centre pieces. I attached the balloons by putting 2 behind the presents and 1 from the top centre piece. Lastly, I added a little bit of double-sided tape to the bottom of the coloured image and attached it to the front of the main centre piece. For the sentiment on the front panel, I inked around the edges with Tim Holtz Distress Ink – Fossilized Amber and then popped it up using 3M VHB – 2 sided tape. I added 2 balloons and used a black marker to create the tails for the balloons.

Card Recipe:

Stamps: Meow Meow 01 – D20013 – Dreamerland Crafts

Sentiments: Birthday 07 – DCS17058 – Dreamerland Crafts, Birthday 08 – DCS17059 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Fossilized Amber

Paper: Copic Marker X-Press It Blending Card, Your Next Stamp Designer Paper Pad – Birthday Girl – 6″ x 6″

Die Cut: Lawn Fawn – Centre Picture Window Card, Lawn Fawn – Centre Picture Window Card Add-On, Your Next Stamp – Mini Balloon Trio Die Set (YNSD241)

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Kitten: C8, C6, C4, R30, R24, R20 (Noses – Sakura Glaze – Black)

Cake and Icing:  RV66, RV55, RV52, RV06, RV04, RV02, G02, Y08, YR16

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Miss You!!


Today, I’m sharing a slim-line card that I made using Dreamerland Crafts stamps called Meow Meow 04 – D20016 for the main image and for the sentiment Just A Note To Say – DCS17038Dreamerland Crafts. Love this new set and I as soon as I saw it, I knew I wanted to make a card to show how a lot of us are feeling right now during these Covid times missing family and friends.

To make this card I used a base card of 7″ x 8.25″ using Hammermill – Premium Colour 100 lb. cardstock. I scored it at 3.25″.  Next, using my Couture Creations – Go Power and Emboss and Whimsy Stamps – Slimline Marquee Die, I die cut Copic Marker X-Press It Blending Card.  Using my MISTI and Memento – Tuxedo Black ink, I stamped all of the images onto the shaped die cuts and coloured them in with Copic markers.

The frame die cut was coloured using Picket Fence Studio Blender Brush and Tim Holtz Distress Inks: Picked Raspberry, Spun Sugar and Worn Lipstick. The sentiments were stamped and embossed onto black cardstock using Versamark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat set using Marvy Uchida – Embossing Heat Tool. My cutter was used to cut the stamped sentiments into small strips. 3M VHB – 2 sided tape was applied to the back of each of the sentiments.

To assemble the card, I first turned the die cuts upside down and used a little bit of Scotch Tape on the back side to keep the inserts in place. Then, I applied double-sided tape across the entire back and attached it directly to the card base. I attached each of the sentiments and finished off the card with Crafts – Rhinestone Stickers.

Card Recipe:

Stamps: Meow Meow 04 – D20016 – Dreamerland Crafts

Sentiments: Just A Note To Say – DCS17038 – Dreamerland Crafts, Love and Cuddles – Penny Black

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Tim Holtz Distress Ink – Spun Sugar, Tim Holtz Distress Ink -Worn Lipstick, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: Whimsy Stamps – Slimline Marquee Die (WSD347)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Couture Creations – Go Power and Emboss, Picket Fence Studio Blender Brushes, Marvy Uchida – Embossing Heat Tool, Crafts – Rhinestone Stickers – 02-3048783

Image coloured with Copic Markers:

Cats: C7, C5, C3, R30, R22, R20, 100, YG23, YG17, G07 (Noses – Sakura Glaze – Black)

Bunny:  E35, E33, E31

Grass: YG17, YG13, YG03, YG01

Sky: B02, B01, B00, B000

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.