Tag Archive | Flower Pot

Sitting Gnome – Flower Pot!

Dec13

Today I’m sharing a Spring card that I made using KLM Digital Designs – Sitting Gnome – Flower Pot from the new December 2024 Release.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Using Tim Holtz Distress Oxide Ink – Salty Ocean and a blending brush, I applied the clouds in the sky with stencils that I had made previous using Avery Elle – Pierced Clouds Die. The grass was added in using Tim Holtz Distress Oxide Inks – Mowed Lawn and Lawn Fawn – Clippings – Slimline Grassy Hillside Stencils.

The image was printed out onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers listed below.  Using a Quickie Glue pen, I added some glitter to the butterfly dots, leaves and petals on the flowers. The image was fussy cut and a black marker was applied around the entire image. I applied a shadow in the grass where I knew I was going to position the flower pot. Then using stamps from Lawn Fawn – Garden Before ‘n Afters, I applied the sentiment with Versa Fine – Onyx Black ink. Ranger – Clear Super Fine Detail embossing powder was applied over top of the ink and then heat embossed using a Marvy Uchida – Embossing Heat Tool. U-Line Double-Sided Foam Tape was applied to the image and it was popped up onto the card.

Card Recipe:

Stamp: KLM Digital Designs – Sitting Gnome – Flower Pot

Sentiment: Lawn Fawn – Garden Before ‘n Afters

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Oxide Ink – Salty Ocean, Tim Holtz Distress Oxide Inks – Mowed Lawn,

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Stencils: Avery Elle – Pierced Clouds Die (D-05-01), Lawn Fawn – Clippings – Slimline Grassy Hillside Stencils

Miscellaneous: U-Line Double-Sided Foam Tape, Quickie Glue, Glitter, Ranger – Clear Super Fine Detail embossing powder, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beard: YR68, YR31, YR18, Y38

Shirt: BG09, BG05, BG02, BG01

Pants: B99, B97, B95, B91

Socks: BG09, BG05, BG02, BG01, R46, R14, R08, C02, C01, C00

Hat: R46, R24, R14, R08

Shoes: 100, W9, W7, W5

Flower Pot: E57, E35, E33, E31

Leaves: G16, YG25, YG23

Flower and Buds: YR16, YR12, Y38, Y35, Y17, Y15, Y11, Y06, E15

Butterfly: Y35, Y15, Y08, E27, W9

Grass Shadow: YG25, YG23, YG03

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Purfect Birthday!

Nov1

Today I’m sharing a birthday card that I made using KLM Digital Designs – Kitty – Flower Pot from the new October 2024 Release. This image also comes with the 2 other sentiments, “Let’s Pawty!” and “Hugs, kisses and a lot of Birthday wishes“.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Forever in Time – Birthday Blast was cut to the size of 2″ x 5.5″ and adhered to the base with liquid glue.

The image and sentiment were printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. The image was coloured in with Copic markers and a Prismacolor Premier black pencil was used to colour in the eyes, the whiskers and add some deeper definition to the cat’s facial features and flower centres. Sakura Glaze – Black Pen was used to colour in the nose. Once the colouring of the image was completed, Copic marker BG000 was used to colour around the entire image and then it was fussy cut leaving a slim border. The sentiment was fussy cut and then attached to a scrap piece of Recollections – Matte Gold Foil cardstock using liquid glue. Once again, the sentiment was fussy cut.

The card was now ready to assemble. U-Line Double-Sided Foam Tape was applied to the image and sentiment. Both items were popped up onto the card. Kraftin’ Kimmie – Fruity Dots were added to complete the card.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Kitty – Flower Pot

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Forever in Time – Birthday Blast – 6″x6″ paper, Recollections – Matte Gold Foil cardstock

Miscellaneous: U-Line Double-Sided Foam Tape, Kraftin’ Kimmie – Fruity Dots, Sakura Glaze – Black Pen

Image coloured with Copic Markers:

Cat: C8, C7, C6, C4, C3, R29, R27, R24, R02, R01, R00, PrismaColor Premier Pencil – Black, Sakura Glaze – Black Pen (Nose)

Flower Pot: E99, E97, E95, Colorless Blender

Flowers and Leaves: E15, Y19, Y17, Y15, Y11, Y08, G16, YG25, YG23

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Flower Pot Gnome – Girl!

Feb6

Today I’m sharing a Thank You card using KLM Digital Design – Flower Pot Gnome – Girl from the new February 2024 release. This image also comes with 2 more sentiments, “You are loved” and “Carry on with courage“.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I had created a 5.5″ x 4.25 frame around the image before printing it out with a HP Printer. I also printed out a second image onto plain photocopy paper and fussy cut around it. The image was coloured in with the Copics listed below and then I attached the mask that I had created out of the plain paper over top of the coloured image. Using some stencils that I had created previously with Avery Elle – Pierced Clouds Dies and Tim Holtz Distress Ink – Salty Ocean, I created the clouds with a blender brush. Once this was done, I coloured in the grass. The image was then cut to the size of 5.5″ x 4.25 and attached with double-sided tape to a card base of the same size using Hammermill – Premium Cardstock 110 lb.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Flower Pot Gnome – Girl

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Dies: Avery Elle – Pierced Clouds Die (D-05-01)

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Hair: E08, YR18, YR16, YR12

Jeans and Hat: B26, B23, B21

Shoes: E27, E25, E23, E21

Shirt: BG72, BG57, BG32, BG11

Flower Pot, Flowers, Leaves: E13, E09, E08, V04, V01, V000, Y17, Y04, G16, YG25, YG23

Grass: G16, YG25, YG23, YG03, YG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Flower Pot Gnome!

Jan21

Today I’m sharing a card using KLM Digital Design – Flower Pot Gnome from the new January 2024 release. This image also comes with 2 more sentiments, “Something about you made me feel a little more alive and a far less lost” and “You will forever be my always”. I love these sentiments because they can be used for Valentine’s Day, anniversaries or just to say “I love you”.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I had created a 5.5″ x 4.25 frame around the image before printing it out with a HP Printer. I also printed out a second image onto plain photocopy paper and fussy cut around it. The image was coloured in with the Copics listed below and then I attached the mask that I had created out of the plain paper over top of the coloured image. Using some stencils that I had created previously with Avery Elle – Pierced Clouds Dies and Tim Holtz Distress Ink – Salty Ocean, I created the clouds with a blender brush. Once this was done, I coloured in the grass. The image was then cut to the size of 5.5″ x 4.25 and attached with double-sided tape to a card base of the same size using Hammermill – Premium Cardstock 110 lb.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Flower Pot Gnome

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Dies: Avery Elle – Pierced Clouds Die (D-05-01)

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E08, YR18, YR16, YR12

Jeans and Hat: B26, B23, B21

Shoes: E27, E25, E23, E21

Shirt: BG72, BG57, BG32, BG11

Letter: C1, C00, Colorless Blender

Flower Pot, Ribbon, Flowers, Wrapping and Leaves: E95, E25, E19, E17, E16, E13, V04, V01, V000, Y17, Y15, Y08, Y04

Grass: G16, YG25, YG23, YG21, YG03, YG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.