Tag Archive | Kraftin’ Kimmie Polar Dots

Butterfly Hi!


It’s Wednesday, and this week, I used Butterfly Chick – SLF007 (High Hopes Rubber Stamps) for the main image from the new August 2020 release and Flutter’in By – F004 (High Hopes Rubber Stamps) for the sentiment. This little butterfly has decided to take a moment to say “Hi” to this adorable little chick. Have you taken a moment to call someone and just “Hi” today?

To make my card this week, I started out with a simple white card base, sized at 6″ x 6″. I used the retired die cuts from Craftin Desert Diva’s – Inside Scalloped Squares and a mixture of Momenta – Cardstock and American Crafts – Basics paper for my background. The same die cut was also used to cut the Copic Marker X-Press It Blending Cardstock. The Copic paper was then stamped on with my MISTI and Memento – Tuxedo Black ink. I coloured in the image with Copic markers.

For the assembly of the card, I first placed down the large background using 2-sided tape. Then I added in the 1st yellow inset using glue as it was easier to move around and get it into place. Lastly, I added in the last inset for the large scalloped square. For the smaller square, the coloured image and yellow cardstock were turned over and then taped together with some Scotch Tape. Then 3M VHB – 2 sided tape was used to pop it up into the centre of the larger square.

The sentiment was stamped with Memento – Tuxedo Black and then die cut with My Creative Time – Rectangle Frame Dies. Tim Holtz Distress Ink – Fossilized Amber was used to go around all of the edges. Then the sentiment was also popped up with 3M VHB – 2 sided tape.

To finish off the card I added on some butterflies and also a few Kraftin’ Kimmie – Polar Dots in a few places.

Card Recipe:

Stamp: Butterfly Chick – SLF007 (High Hopes Rubber Stamps)

Sentiment: Flutter’in By – F004 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Fossilized Amber

Paper: Copic Marker X-Press It Blending Card, Momenta – Cardstock, American Crafts – Basics (6″x6″, 15.2cmx15.2cm)

Die Cuts: Craftin Desert Diva’s – Inside Scalloped Squares, My Creative Time – Rectangle Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Kraftin’ Kimmie – Polar Dots, Butterfly Stickers – 02-3051386

Image coloured with Copic Markers:

Chick and Bow: Y17, Y15, Y13, YR18, YR16, YR14, YR12, B18, B16, B14, BV00, BV000

Grass: YG17, YG13, YG03, YG01

Butterfly: E79, E77, E71, B18, B16, B14, BV08, V05, V04, Black (100), Gelly Roll Sakura #8 Pen

Clouds and Sky: B60, B01, B00, B000, B0000, C0, Colorless Blender

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Cupcake Gnome


Today I’m sharing this adorable Cupcake Gnome image from KLM Digital Designs new August release. He’s made this big cupcake just in time to help a special someone celebrate another amazing  birthday year!

I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. The image was then coloured in with Copic markers, fussy cut, then lined around all of the edges with a black marker.

For the main background, I used a white card base of 5.5″ x 4.25″.  PhotoPlay – Party Girl paper was used to create the background. To do this, multiple layers of the paper were cut out using a mixture of My Creative Time – Rectangle Frame Dies and Layers. Then the cut rectangles were edged with Kraftin Kimmie – Mermaid Melody and Kraftin’ Kimmie – Pink Pizzaz inks.

For the sentiment. “Happy Birthday” was die cut 5 times and then layered to give it dimension. Once all of the layers were completely assembled the tops of each were stamped with VersaMark ink and then heat embossed with Ranger – Clear Super Fine Detail embossing powder.

I popped up the image and background layers with 3M VHB – 2 sided tape to complete the card and added in a few Kraftin’ Kimmie Krafty Dots.

Card Recipe:

Stamp and Sentiment: Cupcake Gnome (KLM Digital Designs)

Inks: HP Printer Grayscale, Kraftin Kimmie – Mermaid Melody, Kraftin’ Kimmie – Pink Pizzaz

Paper: Copic Marker X-Press It Blending Card, Photo-Play “Party Girl” by Samantha Walker – 6″ x 6″ paper pad

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers, PaperCrafter Today – 15 Die Cut Sentiment Set

Embosssing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: 3M VHB – 2 sided tape, Kraftin’ Kimmie Party Time Dots, Kraftin’ Kimmie Under Water Dots, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W5, W4, W3, W2, W1, W0, W00

Hat and Shirt: BG09, BG07, BG05, BG02

Pants: B26, B23, B21

Boots: E29, E27, E25, E23, E21

Cupcake Icing and Wrapper: Y19, Y18, Y17, Y04, Y02, Y00, RV17, RV14, RV13, RV11, RV10, E27, E25, E23, Atayou Spica – Twinkling Like Stars! 08 – Turquoise, 04 – Orange, 02 – Pink, Gelly Roll Sakura #8 Pen

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Voila! Today is Your Day!


Today I’m sharing this adorable Chef Gnome (KLM Digital Designs) image and sentiments from KLM Digital Designs new release. He has been very busy preparing your special birthday cake full of layers of joy and happiness for your birthday. Enjoy! Calories don’t count on your special day. LOL!

I printed out the main image and sentiment onto Copic Marker X-Press It Blending Card using my HP Printer. I then proceeded to colour in the image with Copic markers. This was my second time colouring him as the first one shifted on the mat of my Brother Scan and Cut and cut half of his hat off. UGH! Good news is I had already listed all of my colours so it was easy to colour him again. The joys of crafting. LOL!

For the main background, I used a white card base of 5.5″ x 4.25″. I used Echo Park – Let’s Party paper to create the background. I cut one piece at 5.5″ x 3″ and the other at 5.5″ x 1.5″ to give me some play room when I layered them onto the base card. I also edged around the background paper with Tim Holtz Distress Ink – Cracked Pistachio.

Once the image was coloured in, I used my Brother Scan and Cut to create a pattern so that I could layer the finished image on top of it. I also used the same cutter to create the thin border around the image. For the sentiments, I fussy cut both of them and then layered them onto some yellow and black cardstock. I edged around the yellow cardstock with Tim Holtz Distress Ink – Fossilized Amber.

I popped up the image and sentiments with 3M VHB – 2 sided tape to complete the card and added in a few Kraftin’ Kimmie Krafty Dots.

Card Recipe:

Stamp and Sentiment: Chef Gnome (KLM Digital Designs)

Inks: HP Printer Greyscale, Tim Holtz Distress Ink – Fossilized Amber, Tim Holtz Distress Ink – Cracked Pistachio

Paper: Copic Marker X-Press It Blending Card, Echo Park – Let’s Party (6″ x 6″)

Tools: 3M VHB – 2 sided tape, Brother Scan and Cut, Kraftin’ Kimmie Summer Dots, Kraftin’ Kimmie Polar Dots

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W5, W4, W3, W2, W1, W0, W00

Hat and Shirt: C2, C1, C0, Colorless Blender

Pants: C9, C7, C5

Boots: E29, E27, E25, E23

Whisp: R39, R37, R35, C7, C5, C3

Cake: YR82, YR65, YR61, Y08, Y04, Y02, R85, R83, R81, Atayou Spica Markers – Twinkling Like The Stars – Pink 02, Turquoise 08 and Orange 04

Cake Plate: BG34, BG32, BG18, BG13

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.