Tag Archive | Picket Fence Studio Blender Brushes

Feel Good!!


Today, I’m sharing a card that I made using Dreamerland Crafts stamps called Having You Around – D19078 for the main image and sentiment. There’s nothing like the love between a boy and his faithful companion. They become best friends as they both grow older together!!!

To make this card I used a base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. I also cut a panel the same size out of Copic Marker X-Press It Blending Card. I used this to create my background using stencils I created to make clouds by Avery Elle – Pierced Clouds Die (D-05-01) and inks listed below by Tim Holtz. Copic markers were used to colour in the water and I used My Favourite Things – Slimline Grassy Edges Stencil as a guide for the grass on the bottom of the card. Using my MISTI and Versa Fine – Onyx Black ink, I stamped the sentiment and then embossed the ink with Ranger – Clear Super Fine Detail embossing powder. This was heat set with Marvy Uchida – Embossing Heat Tool. I used double-sided tape and attached my background panel to the base card.

Using my Cuttlebug and dies from Studio Light – Wonderful Autumn, I cut the trees and landscape out of Copic Marker X-Press It Blending Card. Using my Copic markers, I coloured these in as well. Then I layered them on top of each other and used glue to adhere them to the coloured background.

Next, using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto Copic Marker X-Press It Blending Cardstock and coloured it in with Copic markers. I fussy cut around the image by hand and used a black marker to go around all of the edges. 3M VHB – 2 sided tape was applied to the back of the image and it was placed on top of the background to finish off the card.

Card Recipe:

Stamp and Sentiment: Having You Around – D19078 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Broken China, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: Studio Light – Wonderful Autumn – StencilWA311, Avery Elle – Pierced Clouds Die (D-05-01)

Stencil: My Favourite Things – Slimline Grassy Edges Stencil (ST-151)

Embossing Powder: Ranger – Clear Super Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Picket Fence Studio Blender Brushes, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R22, R20

Hair: E47, E44, E43, E40

Shirt and Hat: E89, E87, E84, R24

Jeans:  B26, B23, B21

Dog: E55, E53, E51

Boat: E49, E27, E25, E23, E21

Trees: E25, E23, G99, G94, G82

Grass: YG17, YG13, YG03, YG01

Water: B93, B91, B52, B41, B06, B04, B02, B01, B000

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Miss You!!


Today, I’m sharing a slim-line card that I made using Dreamerland Crafts stamps called Meow Meow 04 – D20016 for the main image and for the sentiment Just A Note To Say – DCS17038Dreamerland Crafts. Love this new set and I as soon as I saw it, I knew I wanted to make a card to show how a lot of us are feeling right now during these Covid times missing family and friends.

To make this card I used a base card of 7″ x 8.25″ using Hammermill – Premium Colour 100 lb. cardstock. I scored it at 3.25″.  Next, using my Couture Creations – Go Power and Emboss and Whimsy Stamps – Slimline Marquee Die, I die cut Copic Marker X-Press It Blending Card.  Using my MISTI and Memento – Tuxedo Black ink, I stamped all of the images onto the shaped die cuts and coloured them in with Copic markers.

The frame die cut was coloured using Picket Fence Studio Blender Brush and Tim Holtz Distress Inks: Picked Raspberry, Spun Sugar and Worn Lipstick. The sentiments were stamped and embossed onto black cardstock using Versamark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat set using Marvy Uchida – Embossing Heat Tool. My cutter was used to cut the stamped sentiments into small strips. 3M VHB – 2 sided tape was applied to the back of each of the sentiments.

To assemble the card, I first turned the die cuts upside down and used a little bit of Scotch Tape on the back side to keep the inserts in place. Then, I applied double-sided tape across the entire back and attached it directly to the card base. I attached each of the sentiments and finished off the card with Crafts – Rhinestone Stickers.

Card Recipe:

Stamps: Meow Meow 04 – D20016 – Dreamerland Crafts

Sentiments: Just A Note To Say – DCS17038 – Dreamerland Crafts, Love and Cuddles – Penny Black

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Tim Holtz Distress Ink – Spun Sugar, Tim Holtz Distress Ink -Worn Lipstick, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: Whimsy Stamps – Slimline Marquee Die (WSD347)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Couture Creations – Go Power and Emboss, Picket Fence Studio Blender Brushes, Marvy Uchida – Embossing Heat Tool, Crafts – Rhinestone Stickers – 02-3048783

Image coloured with Copic Markers:

Cats: C7, C5, C3, R30, R22, R20, 100, YG23, YG17, G07 (Noses – Sakura Glaze – Black)

Bunny:  E35, E33, E31

Grass: YG17, YG13, YG03, YG01

Sky: B02, B01, B00, B000

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Hang in There!


It’s Wednesday, and this week, I thought I’d make an inspirational card to share with you using Raggedy Ann-ouncement – R044 (High Hopes Rubber Stamps) for the main image and Hang In There – D278 (High Hopes Rubber Stamps) for the sentiment.

To make my card this week, I started off with a card base of 5.5″ x 4.25″.  I created the background on Hammermill – Premium Colour cardstock using various stencils, Picket Fence Studio Blender Brushes and Tim Holtz inks which I have listed below. I thought the sun rays reflected a ray of hope for everyone and I hope that we will all be seeing better days soon. Once the background was finished, I used 2 sided tape and mounted it onto the base card.

I stamped the image  and sentiment onto Copic Marker X-Press It Blending Card and coloured in the main image with Copic markers. I ran the coloured image through my Brother Scan and Cut to create a slim border around it and then went around the edges with Y06 – Yellow and YG25 – Celadon Green to make it blend into the background. Lastly, I popped up the image using 3M VHB – 2 sided tape and created a small shadow below Raggedy Ann.

Card Recipe:

Stamp:  Raggedy Ann-ouncement – R044  (High Hopes Rubber Stamps)

Sentiment: Hang In There – D278 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Squeezed Lemonade, Tim Holtz Distress Ink – Mustard Seed, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Stencil: Kraftin’ Kimmie – Starburst, Lawn Fawn – Lawn Cut dies (Made into Stencil), Kraftin’ Kimmie – Krafty Scenery 2

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Picket Fence Studio Blender Brushes

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20

Hair: R35, R17, R14, R08

Dress: R59, R37, R35

Patch: B52, B41, B12

Apron and Socks: C-2, C-1, C-0

Shoes: C10, C8, C5, C3

Sign: E37, E35, E33, E31, E30

Shadow below feet: YG25, YG06, YG03

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.