Tag Archive | UNIPosca PC-3M White marker

Penguin Joy

Jan8

Sharing another Christmas card that I made using Whimsy Stamps – Penguin Joy – C1140. I love colouring penguins and couldn’t resist this adorable image when I saw it! LOL!

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I cut Recollections – Fireside paper to be the same size and adhered it to the base using double-sided tape. I applied Crafts – Sparkling Stickers – 02-3068629 – Red to a piece of Hammermill – Premium Colour 100 lb. cardstock. Using my Cuttlebug and MFT – Cross Stitch Rectangle dies, I die cut a large rectangle for the Sparkle paper combined piece and a smaller rectangle from Copic Marker X-Press It Blending Card cardstock. Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the smaller rectangle. This was coloured in with Copic markers. I applied the snow flakes in the sky using a UNIPosca PC-3M White marker.  Stickles – Diamond was applied to create the snow on the ground. U-Line double-sided tape was applied to both of the die cuts and they were popped up onto the centre of the card.

Card Recipe:

Stamp and Sentiment:  Penguin Joy – C1140 – Whimsy Stamps

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Fireside 6″ x 6″ (15.2 cm x 15.2 cm), Crafts – Sparkling Stickers – 02-3068629 – Red

Dies: MFT – Cross Stitch Rectangle

Miscellaneous: U-Line double-sided tape, Stickles – Diamond, UNIPosca PC-3M White marker, MISTI – Most Incredible Stamping Tool

Image coloured with Copic Markers:

Penguins: W9, W7, W5, W0, E41, E40, E15, YR14, Y17, Y11

Signs: YR31, YR30

Greens: YG63, YG07, G19, G17

Reds: R59, R37, R35, R21

Holly: BG99, YG67, YG63, YG61, G21

Sky: B02, B01, B00, B000

Snow: BV20, B000

Hope you like it and have a great week!

Birthday Wishes!!

Dec29

Today, I’m sharing a birthday card that I made using Polkadoodles stamp called Winnie – Birthday Tree for my sister-in-law.

To create this card I began by making a base of 5″ x 5″ using Hammermill – Premium Colour 100 lb. cardstock. I applied a combination of Tim Holtz Distress Oxide Ink – Worn Lipstick and Festive Berries around the edges of the card with blending brushes. I imported the image into Microsoft Word and then printed it out using High Quality Grayscale onto Copic Marker X-Press It Blending Card cardstock.

With my Cuttlebug, I die-cut the image and Hot Buy Craft Smart – Holiday Glitz Glitter Paper using Whimsy – Wavy Stitched Squares Die Set. U-Line double-sided tape was attached to the larger die-cut and it was popped up onto the centre of the card. I coloured in the image using Copic markers and then added Cosmic Shimmer Fluffy Stuff to the snow on the bottom. A Marvy Uchida – Embossing Heat Tool was used to puff up the liquid. Stickles – Diamond was added to the snow in between and in some areas on top of the Fluffy stuff. With a UNIPosca PC-3M White marker, I created the snow in the sky. Once the Stickles dried, I popped up the coloured image layer to the card using U-Line double-sided tape as well. YNS Gumdrops – Sparkly Enchanted Garden were added to the centre of the snowflakes to finish off the card.

Card Recipe:

Stamp: Winnie – Birthday Tree – Polkadoodles

Inks: High Quality Grayscale, Tim Holtz Distress Oxide Ink – Worn Lipstick, Tim Holtz Distress Oxide Ink – Festive Berries

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: Whimsy – Wavy Stitched Squares Die Set (WSD371)

Tools and Miscellaneous: U-Line double-sided tape, Cuttlebug, UNIPosca PC-3M White marker, Cosmic Shimmer Fluffy Stuff, Stickles – Diamond, Marvy Uchida – Embossing Heat Tool, Stickles – Diamond

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E47, E44, E43

Coat, Mitts, Hat and Boots: BG72, BG57, BG32, BG11, W9, W7, W5

Cupcake: BG57, BG32, B23, RV17, RV14, RV13

Racoon: W9, W7, W5, W2, W0

Present and Bow: RV14, RV13, RV11, Y28, Y26, Y23, Y15

Tree: G99, G21, G20, YG67, YG17, E49, E27, E25, E23

Sky: B05, B04, B02, B01

Dress, Hat and Coat Trim: C1, C0, C00

Shadows in Snow: BV23, BV20, Colorless Blender

Hope you like it and have a great week!

Delivering Candy Angel!!

Dec22

Today, I’m sharing a Christmas card that I made using Polkadoodles stamp called Delivering Candy – Winnie Angel. It’s hard to believe that Christmas is only a few days away. This little Christmas angel is all set to make someone’s Christmas very special.

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Hot Buy Craft Smart – Holiday Glitz Glitter Paper was cut to the same size and attached to the base card using double-sided tape. I imported the image into Microsoft Word and then printed it out using High Quality Grayscale onto Copic Marker X-Press It Blending Card cardstock. This stops the ink from smudging when you colour the image with your markers.

With my Cuttlebug, I die-cut the image and Recollections – Matte Gold Foil cardstock using Penny Black Creative Dies – Antique Frame. U-Line double-sided tape was attached to the larger die-cut and it was popped up onto the centre of the card. I coloured in the image using Copic markers and then added Stickles – Diamond to the snow on the bottom. With a UNIPosca PC-3M White marker, I created the snow in the sky. Wink of Stella – Clear was applied to the wings and the halo. Once the Stickles dried, I adhered the coloured image layer to the card using U-Line double-sided tape as well.

Card Recipe:

Stamp: Delivering Candy – Winnie Angel – Polkadoodles

Inks: High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Recollections – Matte Gold Foil cardstock

Die Cuts: Penny Black Creative Dies – Antique Frame 51-937

Tools and Miscellaneous: U-Line double-sided tape, Cuttlebug, UNIPosca PC-3M White marker, Wink of Stella – Clear, Stickles – Diamond

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E47, E44, E43, E42

Coat and Leaves: YG23, YG17, YG11

Wings: BG0000, BG000, BV0000, Y00

Purse, Candy Canes and Berries: R59, R39, R37

Candy Canes and Presents: R59, R39, R37, RV14, RV13, RV11, BG57, BG32, BG11, YG09, YG07, YG03

Boots: C9, C7, C5, C3

Halo: Y28

Sky: B05, B04, B02, B01

Shadows in Snow, Hat and Coat: BV20, B0000, Colorless Blender

Hope you like it and have a great week!

Everything is Magical!

Dec15

Sharing a Christmas card that I made today using KLM Digital Design – Sledding Gnome from the new December 2022 release. This image also comes with 2 more sentiments, “Some people are worth melting for” and “Walking in a Winter WONDERLAND”.

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I cut Lawn Fawn – Let It Shine Snowflakes designer paper to be the same size and adhered it to the base using double-sided tape. The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The printed image was die cut using my Cuttlebug and Die-namics – MFT – Stitched Rec Scallop Frame dies. It was coloured in and then I applied Cosmic Shimmer Fluffy Stuff. DecoArt Glamour Dust was sprinkled over top while it was still wet and then it was heat set with a Marvy Uchida – Embossing Heat Tool to puff up the snow. I applied the snow flakes in the sky using a UNIPosca PC-3M White marker and snow on the ground with Stickles – Diamond in between and on top of the fluffy snow. U-Line double-sided tape was applied to the image after the Stickles was dry and it was popped up onto the base.

Card Recipe:

Stamp and Sentiment:  Sledding Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Lawn Fawn – Let It Shine Snowflakes (6″ x 6″)

Dies: Die-namics – Exclusive Designs for “My Favourite Things” – Stitched Rec Scallop Frame – MFT-860

Miscellaneous: U-Line double-sided tape, Stickles – Diamond, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust, Marvy Uchida – Embossing Heat Tool, UNIPosca PC-3M White marker

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beard: E47, E44, E43, E41

Hat and Mittens: BG72, BG57, BG32, BG11

Jeans: B26, B23, B21

Shoes: C9, C7, C5

Shirt: R46, R14, R08

Sled: E39, E37, E35, E34, E31, E30,  C5, C3, C1

Holly: BG99, YG17, YG03, R46

Sky: B02, B01, B00, B000

Snow: BV20, B000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Winter Wonderland

Dec8

Sharing a CAS card that I made today using KLM Digital Design – Skier Gnome for the main image and Sledding Gnome for the sentiment from the new December 2022 release. I tried Cross-Country skiing a few times. I was so bad at it, that once was enough for any of my friends. They said I was too dangerous on them. LOL! I even skied down into a tree to avoid knocking over 3 people once going down a small hill. My friend was laughing so hard it took him a little while before he could help me back up away from the tree. But, by the time we got back he was freezing and I was hot from all of the hard work I was doing trying to keep up to him. He was a professional skier. That was the last time he ever went with me. Then there was the time that there were about 6 of us. They made the mistake of asking me to go first side-stepping up the hill. I almost made it to the top when my foot slipped and yes, I knocked everyone over like a bunch of bowling pins. LOL! Guess what??? They never went with me again either. Oh well! Some things are just not meant to be!!! As you may have guessed by now. Downhill is definitely out of the question for me.

To make my card this week, I started with a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. Recollections – Christmas Plaids paper was cut to the same size and adhered directly to the base using double-sided tape! The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. With my Cuttlebug and My Creative Time – Rectangle Frame Dies, I die cut the printed image and sentiment.

I coloured in the image and then added in the snow in the sky using a combination of a Gelly Roll Sakura #10 Pen and UNIPosca PC-3M White marker. The snow at the bottom was created using a combination of Cosmic Shimmer Fluffy Stuff and DecoArt Glamour Dust. To puff up the snow, heat was applied using Marvy Uchida – Embossing Heat Tool. I added a little more glitter along the very top of the snow with Stickles – Star Dust. The completed image was then popped up onto the card using U-Line double-sided tape.

Card Recipe:

Stamp:  Skier Gnome – KLM Digital Designs

Sentiment: Sledding Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Christmas Plaids

Die Cuts: My Creative Time – Rectangle Frame Dies

Miscellaneous: U-Line double-sided tape, Cuttlebug, Gelly Roll Sakura #10 Pen, UNIPosca PC-3M White marker, DecoArt Glamour Dust, Cosmic Shimmer Fluffy Stuff, Stickles – Star Dust, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E08, YR18, YR16, YR12

Antlers: E33, E31, E30

Ears: R25, R23, R02, R01

Shirt and Hat: G46, G29, G24, G21, R39, R34

Jeans: B26, B23, B21

Boots: E34, E33, E31, E29, E27, E25, E23

Poles: E39, E37, E35, C8, C6, C5, C4, C3, C1

Sky: B99, B97, B95, B93

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Lighting the Candles!!

Dec7

Today, I’m sharing a Christmas card that I made using Dreamerland Crafts stamp called Lighting the Candles – D15204. This little angel is helping to light the way to a joyous Christmas for all!

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Doodlebug Design Inc. – Winter Wonderland was cut to the same size and applied directly to the base card using double-sided tape. I cut a piece of Recollections – Burgundy to the size of 5.5″ x 2″ and from a scrap piece of patterned paper 5.5″ x 1.75″. Double-sided tape was used to attach the 2 pieces together. These were attached to the base card using double-sided tape.

With my Cuttlebug, I die-cut Crafter’s Companion – Luxury Cardstock – Ice Blue Pack and Copic Marker X-Press It Blending Card cardstock with Creative Expressions by Sue Wilson – Festive Collection – Holly Lattice Frame. U-Line double-sided tape was attached to the larger die-cut and it was popped up onto the centre of the card.

The image was stamped onto the the smaller die-cut using Memento – Tuxedo Black ink, MISTI and Dreamerland Crafts – Lighting the Candles stamp. It was coloured in with Copic markers and Stickles – Star Dust was added to the snow on the ground. For the sky, UNIPosca PC-3M White marker was used for the small snowflakes. Dress It Up – Holiday Collection – Itty Bitty Snowflakes and Dress It Up – Holiday Collection – It’s Cold Outside buttons were placed over top of the images’ snowflakes with liquid glue after I had removed the backing from them. Wink of Stella – Clear was applied to the wings to make them sparkle. I added U-Line double-sided tape to the back of the completed image and popped it up onto the centre of the card.  To complete the card, I placed a PinkFresh Glitter Drops – Lagoon in each corner.

Card Recipe:

Stamp: Lighting the Candles – D15204 – Dreamerland Crafts

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafter’s Companion – Luxury Cardstock – Ice Blue Pack, Doodlebug Design Inc. – Winter Wonderland (6″ x 6″), Recollections – Burgundy

Die Cuts: Creative Expressions by Sue Wilson – Festive Collection – Holly Lattice Frame – CED3125

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cuttlebug, PinkFresh Glitter Drops – Lagoon, Dress It Up – Holiday Colllection – It’s Cold Outside, Dress It Up – Holiday Collection – Itty Bitty Snowflakes, UNIPosca PC-3M White marker, Wink of Stella – Clear

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E47, E44, E43, E42

Dress: BG09, BG05, BG02, BG01

Wings: BG0000, BG000, BV0000, Y00

Wreath: G99, G29, G28, G24, G21, YG67, YG17, R59, R39, R37

Candle: RV14, RV13, RV11, YR12, Y08, R24

Sky: B05, B04, B02, B01

Shadows in Snow: BV20, B0000, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Snowmen – Winter Fun!!

Dec6

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Snowman Dash – TT054 for the main image and Winter Fun! – F109, for the sentiment. Growing up in the North, we couldn’t wait to get home from school to go sledding down the hills across the street or behind our house. There was so much snow that the snowbanks the plows created were just the perfect height for us to have loads of fun! On the weekends, we would go to the much larger hills!

To make my card this week, I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. I inked around the edges with a blender brush and blue ink that I still had on it from a previous project. I don’t clean off my brushes because I have dedicated brushes for each colour group.

The image was stamped onto the inner die cut using my MISTI and Memento – Tuxedo Black ink, which I had die cut using my Cuttlebug and paper from Copic Marker X-Press It Blending Card cardstock with MFT – Stitched Rec Scallop Frame dies. I coloured in the image and then added the sentiment using a MISTI, VersaMark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat embossed using a Marvy Uchida – Embossing Heat Tool. The snow in the sky was created using a Gelly Roll Sakura #10 Pen and UNIPosca PC-3M White marker. Stickles – Star Dust was added to the snow on the hill and Cosmic Shimmer Fluffy Stuff and DecoArt Glamour Dust were added to give some texture to the snow where the sled had been. A Marvy Uchida – Embossing Heat Tool was used to fluff up the Cosmic Shimmer Fluffy Stuff. Once the Stickles was all dry, I pieced the 2 die cuts back together using Scotch tape on the back. U-Line double-sided tape was added to the combined piece and it was popped up onto the card.

Card Recipe:

Stamps: Snowman Dash – TT054 (High Hopes Rubber Stamps)

Sentiment: Winter Fun – F109 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Die Cuts: Die-namics – Exclusive Designs for “My Favourite Things” – Stitched Rec Scallop Frame – MFT-860

Tools and Embellishments: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Stickles – Star Dust, Cuttlebug, DecoArt Glamour Dust, Cosmic Shimmer Fluffy Stuff, UNIPosca PC-3M White marker, Marvy Uchida – Embossing Heat Tool, Blending Brush

Image coloured with Copic Markers:

Snowmen: BV20, B0000, YR68, YR31, Y38, R59, R235, 100, W9, W7, W5, Colorless Blender

Snowman1 Mittens and Scarf: BV08, BV13, BV02, BV01, BV00

Snowman2 Mittens and Scarf: BG75, BG57, BG49, BG13, BG11, BG10

Snowman3 Hat and Mittens: R59, R46, R37, R35, R14, R08

Sled: E49, E47, E39, E37, E35, E34

Sky: B06, B05, B04, B02

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Udderly Fabulous Christmas!!!

Nov29

It’s Wednesday, and this week, I made a CAS Christmas card using High Hopes Rubber Stamps Decorating With Charlie – TT060 for the main image and Udderly Fabulous – HDG007 for the sentiment. These little farm friends have started to decorate their tree. Have you started to decorate yours?

To make my card this week, I began with a card base of 4.25″ x 5.5″ Hammermill – Premium Colour 100 lb. cardstock. I cut Copic Marker X-Press It Blending Card cardstock to be the same size as the base card and then with my MISTI and Memento – Tuxedo Black ink, I stamped the image onto it. I coloured in the image and then placed it back into my MISTI to stamp the sentiment onto it. I applied VersaMark ink and then embossed it with Ranger Embossing Powder White – Extra Fine Detail. I heated this with my Marvy Uchida – Embossing Heat Tool. Snow was added to the sky using a UNIPosca PC-3M White marker. For the snow at the bottom of the card, Brutus Monroe – Snow Paste was applied with a small spatula and DecoArt Glamour Dust was sprinkled over top while it was still wet to give it even more sparkle. Once the snow was dry, I applied double-sided tape and liquid glue to adhere the image directly to the base card.

Card Recipe:

Stamp: Decorating With Charlie – TT060 (High Hopes Rubber Stamps)

Sentiment: Udderly Fabulous – HDG007 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, DecoArt Glamour Dust, Brutus Monroe – Snow Paste, UNIPosca PC-3M White marker

Image coloured with Copic Markers:

Cow: C8, C6, C4, C3, C1, C00, B60, R30, R20, R00, R000, E95, E93, E53, E51, E50

Mouse: R30, R20, R02, R01, W5, W3, W1, W0, W00

Sky: B05, B04, B02, B01, B00

Tree and Pines: E49, E27, E23, G29

Bauble, Scarf and Collar: R59, R37, R35

Holly and Bell: G43, G29, YG63, YR24, Y35, Y08, E15

Grass: YG67, YG63

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.