Tag Archive | Doodlebug Design Inc. – Spring Solid Assortment (12″ x 12″)

Snow Kisses!!


It’s Wednesday, and this week, I made a snow lady Christmas card using High Hopes Rubber Stamps Snow Kisses – TT059 for the main image and Holly Jolly – K048 for the sentiment. I’ve always loved snow people and birds and this stamp combo makes me smile because it has both.

To make my card this week, I began with a card base of AC Cardstock – White, cut and scored to be 6″ x 6″. I cut 2 strips of Doodlebug Design Inc. – Winter Wonderland coloured snowflake pattern to the size of 6″ x .75″. 2 strips of Doodlebug Design Inc. – Spring Solid Assortment paper to the size of 6″ x .25″ and 1 strip of Forever In Time – Textura Sky cut to the size of 6″ x 4″. With Tim Holtz Distress Ink – Evergreen Bough and a blending brush, I inked around all of the edges of the larger pieces. I ran all of the smaller pieces through my Xyron Create a Sticker. The pieces were then attached to the base card from top to bottom. I used liquid glue to attach the larger piece. I trimmed around the 3 sides of the card with a paper trimmer to make it all even.

For the frame around the image, using my Couture Creations – Go Power and Emboss die cutting machine, I die cut the entire frame with Doodlebug Design Inc. – Winter Wonderland paper and Penny Black – Graceful Stackers dies. 2 dies were pieced together for the pink frame using my cutting device and Forever In Time – Textura Blush cardstock. Lastly, I stamped the image with Memento – Summer Sky ink onto Lawn Fawn – Sparkle Cardstock in “Pixie Dust” using my MISTI. I took this piece and ran it through my Couture Creations – Go Power and Emboss die cutting machine again so that it would fit snug into the frame. I cut off the remainder following the stamped snow along the top and inked it with the Memento – Summer Sky ink. Using liquid glue, I applied the pink frame over top of the snowflake die cut while carefully matching up the edges. Liquid glue was applied to the lower back of the snow piece and it was attached to the snowflake background inside the frame.

The image was stamped onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. After colouring the images, I fussy cut around all of them and then with a black marker, inked around all of the edges. I popped up the snowlady using U-Line double-sided tape and attached her to the card under the snow. The little bird was also popped up using U-Line double-sided tape and some liquid glue. Using Copic B41, I added in some shadows in the snow and Stickles – Hibiscus was applied to the scarf and pompom to give them some extra sparkle.

The sentiment was stamped onto Doodlebug Design Inc. – Spring Solid Assortment using my MISTI and Versamark ink. Ranger Embossing Powder White – Extra Fine Detail was applied and then heat embossed using a Marvy Uchida – Embossing Heat Tool. Using my Cuttlebug and My Creative Time – More Stitched Circles, I die cut the sentiment. The edges were inked around using a finger dauber and Tim Holtz Distress Ink – Evergreen Bough. The snowflake was cut using my Cuttlebug, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” cardstock and die from Recollections – Christmas Snowflakes Clear Stamp & Die set. I popped up both the sentiment and snowflake using U-Line double-sided tape onto the card. Lastly, I added 3 Doodlebug Designs Inc. – Sprinkles onto the frame to finish it off.

Card Recipe:

Stamps: Snow Kisses – TT059 (High Hopes Rubber Stamps)

Sentiment: Holly Jolly – K048 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Versamark, Memento – Summer Sky

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Doodlebug Design Inc. – Winter Wonderland (6″ x 6″), Doodlebug Design Inc. – Spring Solid Assortment (12″ x 12″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Forever In Time – Textura Sky, Forever In Time – Textura Blush

Die Cuts: Penny Black – Graceful Stackers (51-658), My Creative Time – More Stitched Circles MCT-D136, Recollections – Christmas Snowflakes Clear Stamp & Die 529291

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Stickles – Hibiscus, Cuttlebug, Blending Brush, Doodlebug Designs Inc. – Sprinkles, Xyron Create a Sticker, Couture Creations – Go Power and Emboss, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Snow Lady: BV20, C00, Colorless Blender, YR18, YR12, YR07, YR04, R29, R27, R24, Eyes (Sakura Glaze – Black), Stickles – Hibiscus

Mitt’s, Coat and Hat: BG72, BG57, BG32, BG13, BG11

Scarf and Trim: RV69, RV09, RV06, RV04, RV02

Birds and Earmuffs: B97, B95, B93, B91, R46, R14, R08, YR12, YR07, YR04, R85, R83, R81, RV55, RV17, RV14, BV02, BV01, BV00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Create Sunshine!!!


It’s Wednesday, and this week, I made a card using Goat Your Back – TT137 by High Hopes Rubber Stamps for the main image and Somedays – GG024 (High Hopes Rubber Stamps) for the sentiment. This momma goat and her babes are out enjoying the warmer weather. Spring is finally here! We just planted our flowers this past weekend, or I should say, I helped pick them out and my husband actually did the planting. He has a green thumb. I definitely don’t. LOL!

To make my card this week, I started with a base of 6″ x 6″ using AC White Cardstock. I cut Bo Bunny – Sweet Moments Divine paper to be the same size as the base card and then inked around the edges with Tim Holtz Distress Ink – Crushed Olive. I attached this directly to the base using double-sided tape. Using Doodlebug Design Inc. – Spring Solid Assortment paper, I die cut the yellow rectangle, large green rectangle and small green rectangle using My Creative Time – Rectangle Frame Dies and My Creative Time – Rectangle Frame Layers. The edges were inked with Tim Holtz Distress Ink – Crushed Olive and Tim Holtz Distress Ink – Fossilized Amber. The same dies were also used to die cut Copic Marker X-Press It Blending Card for the main image. Gina Marie Designs – Nested Scalloped Stitched Rectangles were used to die cut Recollections – Petite Floral paper. The edges of this die cut were inked with Tim Holtz Distress Ink – Scattered Straw.

I stamped my image using my MISTI and Memento – Tuxedo Black ink onto the Copic Marker X-Press It Blending Card die cut. I coloured in the image and background using Copic markers. The sentiment was stamped onto white cardstock using my MISTI and Memento – Tuxedo Black ink. I used my small cutter to cut around the sentiment and inked it with Tim Holtz Distress Ink – Crushed Olive. I die cut the sun and clouds using Copic Marker X-Press It Blending cardstock and Nellie’s Choice – Nature Scene Dies – NSD002 – Sky. I coloured these with Copic markers. I added 3M VHB – 2 sided tape to the back of 1 cloud and the sun and attached them to the main image. The other cloud was attached using glue and tucked under the sun.

The card was now ready to assemble. I attached the large green rectangle to the patterned paper base with 3M VHB – 2 sided tape. The main image and yellow rectangle were attached to the large scalloped rectangle using glue. Then the scalloped rectangle was attached to the large green rectangle with 3M VHB – 2 sided tape. I attached the sentiment to the smaller green rectangle and popped it up using 3M VHB – 2 sided tape. To finish off the card I used a few pop dots and some yellow flowers.

Card Recipe:

Stamp: Goat Your Back – TT137 (High Hopes Rubber Stamps)

Sentiment: Somedays – GG024 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks: Scattered Straw, Crushed Olive, Fossilized Amber

Paper: Copic Marker X-Press It Blending Card, Recollections – Petite Floral – 12 x 12″ (30.4 x 30.4 cm), Doodlebug Design Inc. – Spring Solid Assortment (12″ x 12″), Bo Bunny – Sweet Moments Divine – 12 x 12 in., AC Cardstock – White

Die Cuts: Gina Marie Designs – Nested Scalloped Stitched Rectangles, My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers, Nellie’s Choice – Nature Scene Dies – NSD002 – Sky

Tools \ Miscellaneous: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Dodz Small – Adhesive Dots, Flowers, Pop-dots

Image coloured with Copic Markers:

Goats: E53, E51, E50, E35, E34, E33, E31, E30, C5, C3, C1, C0, C00, R30, R27, R20, R14, Y38, Y35, Y17, Y08, Colorless Blender, (Eyes and Nose – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Grass: YG17, YG13, YG03, YG01

Sky: B02, B01, B00, B000, B0000

Clouds: B60, C00, Colorless Blender

Sun: Y19, Y18, Y17

Check out some other fun new stamps from High Hopes Rubber Stamps
Furry and Friends Release

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.