Tag Archive | 3M – double-sided foam tape

Enjoy The Little Moments

Jun7

Today, I’m sharing a card using KLM Digital Design – Floral Branch Frames from the new June 2024 release and the sentiment from KLM Digital Design – Floral Coffee Cup. The floral frames stamp set comes with 4 beautiful floral frames to choose from. I love these frames because you can use them for so many different occasions.

Hammermill – Premium Cardstock 110 lb. was used to create a 5.5″ x 4.25″ card base. I cut Momenta – Cardstock paper to the same size for the background and applied it directly to the base using double-sided tape. With a Cuttlebug, I die cut the Lattice background using Pinkfresh Studio – Elongated Lattice die and Recollections white cardstock. Zig 2 way glue was applied to the back of the die cut and it was adhered to the base.

The image was imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers listed below and then applied iCraft – deco foil adhesive pen around the circle frame border. Once the glue was dry, I rubbed on some gold foil from Prima (Rub-On) Foils – Jolly. This was my very first time trying this and I wasn’t quite satisfied as the border wasn’t completely smooth. I tested a small piece of paper on the side with some Zig 2 way glue with a finer point and waited for the glue to dry. I tried using the gold foil on this and saw that it worked. Yay! So once again, I repeated the process and went around the circle with the Zig glue this time and the rubbed the foil on to make the circle smoother. I will definitely be trying to use this technique more often now for sure.

The image was fussy cut and then popped up onto the card using U-Line Double-Sided Foam Tape. Lastly, to add a little bit of bling to the card, I applied some random Pixie Dust Glittered – YNS Gumdrops.

Card Recipe:

Stamp:  KLM Digital Design – Floral Branch Frames, KLM Digital Design – Floral Coffee Cup

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Momenta – Cardstock, Recollections – White Cardstock

Dies: Pinkfresh Studio – Elongated Lattice

Miscellaneous: U-Line Double-Sided Foam Tape, Prima (Rub-On) Foils – Jolly, iCraft – deco foil adhesive pen, Zig 2 way glue, YNS Gumdrops – Pixie Dust Glittered, Uni Posca Pen – Yellow

Image coloured with Copic Markers:

Flower Top and Bottom: V17, V15, V12, V000, YR12, E15, Uni Posca Pen – Yellow

Centre Flower: V09, V06, V04, V000, YR12, E15, Uni Posca Pen – Yellow

Leaves: G16, YG25, YG23, YG21

Inner Circle Background: G000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Mandala #6 – Thank You

May31

Today, I’m sharing a Thank You card using KLM Digital Design – Mandala #6 from the new May 2024 release. I fell in love with this Mandala and thought it would make a great flower!

Hammermill – Premium Cardstock 110 lb. was used to create a 5.5″ x 4.25″ card base. I cut some designer paper that I had for the background and applied it directly to the base using double-sided tape. With a Cuttlebug, I die cut the trellis background using Recollections white cardstock and Pinkfresh Studio – Dotted Lattice die. The leaves were die cut from some scrap green cardstock and Spellbinders Cutting Dies – Southern Magnolia.

The image was imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers listed below and then I fussy cut around it and using a bone folder, curved the petals. The Mandala was popped up onto the top part of the card using 2 layers of 3M Double-Sided Foam Tape in the centre.  I glued the leaves to the card under the mandala, but first I added a slight crease in each of them to round up the sides. To finish off the card, I used some ephemora and popped it up onto the card using U-Line Double-Sided Foam Tape. Lastly, I added a gem from Forever In Time – Goldent Sunset in the centre of the mandala and some additional gems on the card to give it a bit more sparkle!

Card Recipe:

Stamp:  KLM Digital Design – Mandala #6

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Floral Designer Paper, Green Cardstock, Recollections – White Cardstock

Dies: Pinkfresh Studio – Dotted Lattice, Spellbinders Cutting Dies – Southern Magnolia

Miscellaneous: 3M Double-Sided Foam Tape, Ephemera (Thank you), U-Line Double-Sided Foam Tape, Forever In Time – Golden Sunset gems

Image coloured with Copic Markers:

Mandala Centre: Y19, Y17, Y08

Mandala Inner Flower: RV19, RV17, RV14, RV000

Mandala Leaves: G16, YG25, YG23, YG21

Mandala Outer Petals: RV09, RV06, RV04, RV000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Owl Carol

Dec3

Today, I’m sharing a Christmas card that I made using a retired image from Di’s Digistamps called Owl Carol.

For the base card, I used Hammermill – Premium Cardstock 110 lb. and cut it and scored it to be 5.5″ x 5.5″. For the background, I cut Hunkydory Adorable Scorable Pattern Packs – Let It Snow paper to the same size as the base card and inked around the edges and along the bottom with Tim Holtz Distress Ink – Prize Ribbon. I adhered this to the base card with double-sided tape. Washi Tape was then applied directly to the left side of the card base. Waffle Flower – Nesting Square dies and Cuttlebug were used to die cut a 4.25″ x 4.25″ piece of dark blue cardstock.  Precision Cutting Dies by Frantic Stamper Inc. “Falalalala” was used to die cut the sentiment 4 times. 3 times with the dark blue cardstock and 1 time using Recollections – Matte Gold Foil cardstock.

The image using HP High Quality Grayscale was printed onto Copic Marker X-Press It Blending Card and die cut using Cuttlebug and My Creative Time -Stitched Squares Inside and Out. The image was coloured in with Copic markers and Cosmic Shimmer Fluffy Stuff was added to the bottom of the image for the snow. Marvy Uchida – Embossing Heat Tool was applied to the snow to puff it up. Stickles – Diamond was applied to the puffy snow to add a little more sparkle and also to the top of the lantern and tree branch. Gelly Roll Sakura #10 Pen was applied in the sky to create a snowy background. Sakura Glaze – Black and Gelly Roll Sakura #5 Pen were added to the noses on the mouse and rabbit. The finished image was popped up onto the blue square cardstock using 3M – double-sided foam tape and then this was attached to the base card using U-Line Double-Sided Foam Tape. The “Falalalala” sentiments were attached together to give the illusion of being 3-D and applied to the card using liquid glue to finish it off.

Card Recipe:

Stamp: Di’s Digistamps – Owl Carol

Inks: HP High Quality Grayscale, Tim Holtz Distress Ink – Prize Ribbon

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Hunkydory Adorable Scorable Pattern Packs – Let It Snow, Recollections – Matte Gold Foil cardstock

Die Cuts: Waffle Flower – Nesting Square dies, My Creative Time -Stitched Squares Inside and Out, Precision Cutting Dies by Frantic Stamper Inc. “Falalalala”, My Creative Time -Stitched Squares Inside and Out

Miscellaneous: U-Line Double-Sided Foam Tape, Stickles – Crystal, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool, 3M – double-sided foam tape, Stickles – Diamond

Image coloured with Copic Markers:

Owl: C1, C0, E23, YR15, YR12

Mouse: W7, W5, W3, W2, R30, R24, R02, Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Mouse Scarf: BG72, BG57, BG32, BG11

Rabbit: E55, E53, E51, R30, R02, C0, C00, Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Rabbit Scarf: G16, YG25, YG21

Guitar: E55, E53, E51, E35, E33

Tree Branch: E29, E25, E23

Lantern and Candle: R46, R14, R08, YR16, Y08, Y00, C8, C6, C4

Sky: B99, B97, B95, B93

Snow: Cosmic Shimmer Fluffy Stuff, Stickles – Diamond

Hope you like it and have a great week!

Added into Challenge:

Challenge #81 – Anything Goes with a Featured Critter

Mandala #2

Nov30

Today I’m sharing a Thank You card using KLM Digital Design – Mandala #2 from the new November release. Mandala’s are always fun to colour because you have so many colour choices to choose from. Each can be unique!

Hammermill – Premium Cardstock 110 lb. was used to create a 5.5″ x 4.25″ card base. The image was imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers listed below and then traced around the entire image using a PrismaColor Premier Black  pencil to make the colours pop. Wink of Stella – Clear was added to some of the purple and little orange pieces in the Mandala. Then I fussy cut around the entire Mandala leaving just a little bit of white space.

I decided to create my own background and to that I used, Recollections – Black cardstock cut to the same size as the base.  Another piece was also cut to 1″ x 4.25″ and placed over top of the black cardstock so that when I coloured in the stencil, that part would remain solid black. I placed the Heffy Doodle – Fancy Foliage on top of the cardstock and then using a finger dauber applied Lisa Horton Crafts – Cloud 9 Interference – Sapphire Gold Shimmer ink to create the glittery background. Couture Creations – You Go Girl – 2 Leaves was die cut from Forever In Time – Glam Glitter Cardstock – Ombre Pastel using a Cuttlebug. “Thank You” was die cut using PaperCrafter Today – 15 Die Cut Sentiment Set dies and Recollections – Matte Gold Foil cardstock.

The background was applied directly to the base card using double-sided tape. The Mandala was popped up onto the top part of the card using 3M Double-Sided Foam Tape. The leaves were cut into 2 and then placed around the Mandala using liquid glue. A PinkFresh Essentials Glitter Drop: Lagoon was applied to the centre of the Mandala and the “Thank You” sentiment was applied to the base using liquid glue.

Card Recipe:

Stamp:  Mandala #2 – KLM Digital Designs

Inks: HP Printer Grayscale, Lisa Horton Crafts – Cloud 9 Interference – Sapphire Gold Shimmer

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black cardstock, Forever In Time – Glam Glitter Cardstock – Ombre Pastel, Recollections – Matte Gold Foil cardstock

Dies: Couture Creations – You Go Girl – 2 Leaves (CO728374), PaperCrafter Today – 15 Die Cut Sentiment Set

Stencil: Heffy Doodle – Fancy Foliage

Miscellaneous: 3M Double-Sided Foam Tape, Cuttlebug, Wink of Stella – Clear, PinkFresh Essentials Glitter Drop: Lagoon

Image coloured with Copic Markers:

Mandala: B69, B66, B39, B18, B16, V17, V15, V12, YR16, YR09, YR07, YR04, Y08, R85, R83, R81, R49, R14, R08, RV00, Wink of Stella – Clear

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.