Tag Archive | Waffle Flower – Nesting Square dies

Sparkle & Cheer!!


It’s Wednesday, and this week, I made a Christmas slim-line card using High Hopes Rubber Stamps Christmas Gofer – TDG003 for the image and Sparkle & Cheer – LDG001 for the sentiment. This little gofer is all set to start decorating his tree for Christmas. With all of this heat right now, snow is sounding pretty good to cool off a bit. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 4″ x 8″. I cut the background to be the same size using Creative Memories – Glacier paper and adhered it to the base card using double-sided tape. I die cut Recollections – White Cardstock and Signature Collection by Sara Davies – Glittering Snowflakes cardstock using my Anna Griffin Empress Mini Machine and My Favourite Things – Die-namics – Elegant Rectangle Stax dies. I stamped the sentiment onto the white cardstock using Memento – Tuxedo Black ink and my MISTI. Using my die cutting machine again and Waffle Flower – Nesting Square dies, I die cut Copic Marker X-Press It Blending Card. I stamped the image onto it using Memento – Tuxedo Black ink and my MISTI.

The image was coloured in with Copic markers and then I added snow to the sky using a Gelly Roll Sakura #10 Pen. For the hat trim and pop-pom, I added Cosmic Shimmer Fluffy Stuff and heated it with my Marvy Uchida – Embossing Heat Tool to puff up the liquid. I put a little bit of Stickles – Diamond onto my finger and dabbed it across the trim and pom-pom to give them an extra bit of sparkle. Lastly, I added some Stickles – Diamond to the snow. When the Stickles was all dry, I adhered the image to Signature Collection by Sara Davies – Glittering Snowflakes cardstock with double-sided tape and some glue. Using my cutter, I cut a slim border around the image. I ran the sentiment through my Xyron Creative Station and adhered it to the larger die cut. U-line double-sided tape was added behind the 2 pieces and they were both popped up onto the card. Lastly, to finish the card off, I added a few YNS Gumdrops – White Sugar and Sparkle to both sides of the sentiment.

Card Recipe:

Stamp: Christmas Gofer – TDG003 (High Hopes Rubber Stamps)

Sentiment: Sparkle & Cheer – LDG001 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Creative Memories – Glacier Paper Pack 12″ x 12″, Signature Collection by Sara Davies – Glittering Snowflakes, Recollections – White Cardstock

Die Cuts: My Favourite Things – Die-namics – Elegant Rectangle Stax – MFT-1268, Waffle Flower – Nesting Square dies

Tools: MISTI – Most Incredible Stamping Tool, Anna Griffin Empress Mini Machine, U-Line double-sided tape, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Stickles – Diamond, YNS Gumdrops – White Sugar and Sparkle, Xyron Creative Station

Image coloured with Copic Markers:

Gofer: E49, E47, E27, E25, E23, E21, R30, R20

Hat and Scarf: BG09, BG05, BG02, BG01, C2, C1, C00, Cosmic Shimmer Fluffy Stuff, Stickles – Diamond

Baubles: R59, R37, R35, YG17, YG09, YG07, YG05, C3, C2, C0

Snow: B60, B00, Stickles – Diamond

Sky: B99, B97, B95, B93, B91

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Eat Cake!!


It’s Wednesday, and this week, I made a birthday card using High Hopes Rubber Stamps Cupcake Hedgie – TDG035 for the image and Eat Cake – FDG026 for the sentiment. I think the expression on this little hedgie says it all! Birthdays should always be an excuse to eat some cake! LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I adhered Scrapbook.com – Brights Smooth Cardstock which was the same size as the base to the card using double-sided tape. Using my Anna Griffin Empress Mini Machine die cutting machine, I die cut the cake background paper with Your Next Stamp Designer Pad – Birthday Boy and My Creative Time – Rectangle Frame Layers. Tim Holtz Distress Ink – Blueprint Sketch was then inked around all of the edges. I add some U-Line double-sided tape and popped it up onto the base card. Again, using my Empress die cutter, I die cut some golden yellow cardstock using My Creative Time -Stitched Squares Inside and Out. I added some U-Line double sided tape and added it to the patterned background. Waffle Flower – Nesting Square dies were used to die cut the smaller square out of Copic Marker X-Press It Blending Card and My Creative Time – Bunch of Fun Circle Die was used to die cut the circle from some Red cardstock.

The image and sentiment were stamped onto the Copic Marker X-Press It Blending Card. I coloured in the image with Copic Markers. I added Stickles – Star Dust to the cupcake to make the layers sparkle. A 1.5″ Circle punch was used to cut out the sentiment. U-Line double sided tape was added to the backs of the image and sentiment. I popped up the image onto the smaller square and the sentiment onto the red circle. I added another layer of U-Line double sided tape to the right side of the red circle and a little bit of glue to the left side and popped it up over top of the main image. To finish off the card, I added on some YNS Gumdrops – Firefly Magic Sparkly Gumdrops and YNS Gumdrops – Sugar Rush Sparkly Gumdrops.

Card Recipe:

Stamp: Cupcake Hedgie – TDG035 (High Hopes Rubber Stamps)

Sentiment: Eat Cake – FDG026 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Blueprint Sketch

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Your Next Stamp Designer Pad – Birthday Boy (6″ x 6″), Scrapbook.com – Brights Smooth Cardstock (4.25″ x 5.5″)

Die Cuts: My Creative Time -Stitched Squares Inside and Out, My Creative Time – Rectangle Frame Layers, My Creative Time – Bunch of Fun Circle Dies, Waffle Flower – Nesting Square dies

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Anna Griffin Empress Mini Machine, Stickles – Star Dust, YNS Gumdrops – Firefly Magic Sparkly Gumdrops, YNS Gumdrops – Sugar Rush Sparkly Gumdrops

Image coloured with Copic Markers:

Hedgehog: E53, E51, E50, E49, E44, E43, E42, E41, W4, R30, R20, R08, W4

Cupcake Wrapper: B29, B26, B24, B21

Cupcake: Y17, Y15, Y11, R46, R14, R08, G14, YG23, YG11, B26, B24, B21

Cherry: R89, R59, R39, R21

Ground: E34, E33, E3

Check out our new re-release of some fun images for our “Let’s Celebrate Release”!

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

A Little Behind!!


It’s Wednesday, and this week, I made belated birthday card using High Hopes Rubber Stamps Henriettas Backside – Q035 for the image and Sorry I’m – FLL031 for the sentiment. Like Henrietta, I get so busy sometimes, that I forget to send out my birthday cards on time.  This little chickie has now given me an excuse for being late. LOL!

To make my card this week, I began with a card base of AC Cardstock – White cut and scored to be 6″ x 6″. I cut Echo Park Paper Co. – It’s Your Birthday – 6″ x 6″ paper to be the same size as the base and adhered it with double-sided tape. Using my Cuttlebug, I die cut some golden yellow cardstock using My Creative Time -Stitched Squares Inside and Out. I added U-Line double-sided tape to the square and popped it up onto the centre of the card. Using my Cuttlebug again, I die cut Forever In Time – Texture Rouge cardstock with Waffle Flower – Nesting Square dies. I added some U-Line double-sided tape and popped this up into the centre of the last square. Lastly, using my Anna Griffin Empress Mini Machine, I die cut the patterned paper using My Creative Time -Stitched Squares Inside and Out. Once again, I added U-Line double-sided tape and popped up the square into the centre of the previous one.

The image and sentiment were both stamped onto Copic Marker X-Press It Blending Card and the image was coloured in with Copic Markers. I fussy cut around the image and ran it through my Xyron Creative Station to create a sticker. I attached this to Scrapbook.com – Playful Smooth Cardstock and then fussy cut around again leaving a small border. Using my Copic markers E25 ad E23, I added some colour under the feet. With my Empress machine again and Poppystamps – Christmas Quotes die, I die cut the sentiment. Tim Holtz Distress Inks – Wild Honey was used to ink around the edges. I added some U-Line double-sided tape to the back of the image and sentiment and popped them up onto the Jean patterned paper to complete the card.

Card Recipe:

Stamps: Henriettas Backside – Q035 (High Hopes Rubber Stamps)

Sentiment: Sorry I’m – FLL031 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Wild Honey

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Doodle Bug Designs Inc. – Down on the Farm – 6″ x 6″ paper pad, Echo Park Paper Co. – It’s Your Birthday – 6″ x 6″ paper pad, Forever In Time – Texture Rouge, Scrapbook.com – Playful Smooth Cardstock (4.25″ x 5.5″), Yellow Cardstock

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Waffle Flower – Nesting Square dies, Poppystamps – Christmas Quotes, Xyron Creative Station

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Anna Griffin Empress Mini Machine, Cuttlebug

Image coloured with Copic Markers:

Hen: E97, E47, E37, E09, YR27, YR23, R08

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Also entered into #Farmquest Challenge Blog #4.  “https://farmquestchallenge.blogspot.com/2022/05/fqcb-theme-4-poultry-and-wire-or-metal.html”.

Somebunny Loves You!!


It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Bunny Blossoms – TDG024 for the image and Some Bunny – FDG032 for the sentiment. I just love this super adorable little bunny taking time to smell the flowers. Spring is here, but the winter snow keeps playing tricks on us still. LOL! We just had another snow storm the other day. I thought April was supposed to bring Spring showers, not Spring snow!!!

To make my card this week, I began with a card base of AC Cardstock – White, cut and scored to be 6″ x 6″. I cut the Recollections – Matte Gold Foil cardstock background paper to the size of 6″ x 6″ and adhered it directly to the base using double-sided tape. Crafts Designer Paper – 02-3093268 was cut to the size of 5.75″ x 5.75″ and inked around the edges with Tim Holtz Distress Ink – Black Soot. I applied U-Line double-double sided tape and popped the paper onto the gold backing. Using my Couture Creations – Go Power and Emboss and Waffle Flower – Nesting Square dies, I die cut another square from Recollections – Matte Gold Foil cardstock and Copic Marker X-Press It Blending Card. I popped up the gold square onto the bunny background and stamped the main image onto the Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black.

The image was coloured in with Copic Markers. I though I’d go out of my comfort zone this week to create this sky with a variety of different colours. I thought it still needed something more so I added in some clouds using a PrimaColor Pencil – White. I also added in some extra fur with PrimaColor Pencil – Beige. Once, I was satisfied with the sky, I added U-Line double-sided tape to the back of it and it too was popped up onto the card. The sentiment was stamped onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black. I fussy cut around it and then applied it to a small piece of Recollections – Matte Gold Foil cardstock using repositionable tape. I used my Brother Scan and Cut to cut around the image with a slight border. I coloured around the circle stamped image with RV000 and then used a black marker to go all around the edges. I applied U-Line double-sided tape and popped it up onto the gold die-cut. Lastly, 2 layers of the U-Line double-sided tape were applied to the right side only of the sentiment and glue to the left and attached it to the base coloured paper to finish off the card.

Card Recipe:

Stamps: Bunny Blossoms – TDG024 (High Hopes Rubber Stamps)

Sentiment: Some Bunny – FDG032 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Black Soot

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Recollections – Matte Gold Foil cardstock, Crafts Designer Paper – 02-3093268

Die Cuts: Waffle Flower – Nesting Square dies

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Couture Creations – Go Power and Emboss, Brother Scan and Cut, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Rabbit: E57, E55, E53, E51, E50, E35, R30, R22, R21, R20 (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #10 Pen), PrimaColor Pencil – Beige (PC997)

Leaves and Grass: G99, YG67, YG17, G21

Flowers: Y17, Y08, RV66, RV63, RV55, RV52, RV00, RV000, R83, R81

Tree and Limbs: E31, E27, E25, E23

Sky: B02, B01, B00, B000, B0000, RV00, R00, R000, Y02, Y00, (Clouds: PrimaColor Pencil – White (PC398))

Hope you like it and have a fantastic week!

Check out more adorable images in the new “Spring Fever Release” at High Hopes Rubber Stamps!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Coffee With A Friend!!


It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Let’s Chat – TLF030  for the image and Perfect Blend – FLL022  for the sentiment. I don’t drink coffee, but really loved these little gnome buddies having a cup of coffee and getting a chance to chat.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I cut Creative Memories – Hot Fudge cardstock to be the same size as the base card and attached it using double-sided tape. Your Next Stamp – The Perfect Blend cardstock was die cut using My Creative Time – Rectangle Frame Layers and my Cuttlebug. I popped this up onto the base background using U-Line double-sided tape. The large square was die cut using Waffle Flower – Nesting Square dies and Creative Memories – Hot Fudge cardstock. The smaller square was cut using My Creative Time -Stitched Squares Inside and Out and Copic Marker X-Press It Blending Card. The image was then stamped with my MISTI and Memento – Tuxedo Black ink onto the Copic Marker X-Press It Blending Card cardstock. I stamped the sentiment onto Hammermill – Premium Colour 100 lb. cardstock and die cut it with My Creative Time – Stitched Zig Zag Ties. The image was coloured in with Copic Markers.

The card was now ready to finish being assembled. I applied U-Line double-sided tape to the backs of all of the remaining pieces and popped them up onto the card base.

Card Recipe:

Stamps: Let’s Chat – TLF030 (High Hopes Rubber Stamps)

Sentiment: Perfect Blend – FLL022 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Your Next Stamp – The Perfect Blend (6″ x 6″), Creative Memories – Hot Fudge (12″ x 12″)

Die Cuts: My Creative Time – Rectangle Frame Layers, My Creative Time – Stitched Zig Zag Ties, Waffle Flower – Nesting Square dies, My Creative Time -Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cuttlebug

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beards: E47, E44, E43, E41, E18, E08, YR18, YR14

Hats and Clothing: B37, B14, B12, BG09, BG05, BG02, E37, E35

Boots: C9, C7, C5, C3, C2

Chairs: E59, E37, E35, E15, E13

Cups and Saucer: BG49, BG45, BG13, BG11

Table and Tablecloth: YR30, E50, E42, E41

Shadow: C3, C2, C1

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Lucky Dog!!


Sharing a card I made today using KLM Digital Design –  Fido’s Home from the new January 2022 release. We grew up having dogs in our family. They were all spoiled and loved very much! They may have thought they were the lucky ones, but deep down, I think we were.

I created the base using Hammermill – Premium Colour 100 lb. cardstock to the size of 5.5″ x 4.25″. For the background, I used Kraftin’ Kimmie – Pawprints Stencil, a Picket Fence – Blending Brush and Tim Holtz Distress Ink – Pumice Stone to create the paw prints. For the hearts, I used the same stencil, a small foam brush and Tim Holtz Distress Ink – Barn Door. With my Cuttlebug and My Creative Time – Stitched Squares Inside and Out, I die cut the red square from Forever In Time – Texture Rouge cardstock.

I imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. I die cut the image using Waffle Flower – Nesting Square dies and the sentiment with My Creative Time – Stitched Zig Zag Ties. I inked around the edges of the sentiment die cut with Tim Holtz Distress Ink – Barn Door and popped it up onto the base card using U-Line double-sided tape. The image was coloured in with Copic markers and the sky was created with Lawn Fawn – Cloudy Stencil and Tim Holtz Distress Ink – Salty Ocean and a mixture of Copic blue markers. The completed image was popped up onto the base card using U-Line double-sided tape to finish it off.

Card Recipe:

Stamp and Sentiments: Fido’s Home – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Barn Door, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Pumice Stone

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Forever In Time – Texture Rouge

Die Cuts: My Creative Time – Stitched Squares Inside and Out, Waffle Flower – Nesting Square dies, My Creative Time – Stitched Zig Zag Ties

Stencils: Kraftin’ Kimmie – Pawprints Stencil, Lawn Fawn – Cloudy Stencil

Miscellaneous: U-Line – 2 sided tape, Cuttlebug, Picket Fence – Blending Brush

Image coloured with Copic Markers:

Dog: B60, C9, C2, C1, C00, E25, E23, Colorless Blender

Dog House: R46, R14, R08, C9, C7, C5, C2, C1, C0

Grass: YG17, YG13, YG03

Sky: B00, B000, B0000, Tim Holtz Distress Ink – Salty Ocean

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

You Got This!!


It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Lasso Some Snow – TDG021  for the main image and Don’t Worry – FDG021 for the sentiment. We all need a little bit of encouragement every now and then and this little snowman is here to give us some.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I used Echo Park Paper Co. – My Favorite Winter cardstock cut to the same size as the base card for the background. I attached this to the base using double-sided tape. Using my Cuttlebug, a mixture of square dies from My Creative Time -Stitched Squares Inside and Out and Waffle Flower – Nesting Square dies, I die cut cardstock from Scrapbook.com Neutrals Smooth Cardstock and also Copic Marker X-Press It Blending Card. I applied double-sided tape to the back of the tan square and applied it directly to the background. U-Line double-sided tape was added to the back of the dark brown square and popped up onto the centre of the tan square.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock square and coloured it in with Copic markers. Gelly Roll Sakura #10 Pen was used to create the snow in the sky. Sakura Glaze – Black and Gelly Roll Sakura #5 Pen were used on the eyes of the snowman. I applied U-line douhble-sided tape to the back of the completed image and popped it up onto the centre of the dark brown square.

With my MISTI and Memento – Tuxedo Black ink, I stamped the sentiment onto Recollections – White cardstock and then die cut it out using my Cuttlebug and My Creative Time – Ribbon End Dies. I inked around the edges using Copic – E59 marker to give it a dark brown border. I used my knife to remove the double border from the piece left behind and then traced the shape of the ribbon onto the remaining piece of Scrapbook.com Neutrals Smooth Cardstock. I cut this out with my cutter and scissors. U-Line double-sided tape was applied to both pieces and the completed sentiment was popped up onto the card below the main image to complete the card.

Card Recipe:

Stamp: Lasso Some Snow – TDG021 (High Hopes Rubber Stamps)

Sentiment: Don’t Worry – FDG021 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Echo Park Paper Co. – My Favorite Winter (6″ x 6″), Scrapbook.com – Neutrals Smooth Cardstock (5.5″ x 4.25″), Recollections – White cardstock

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Waffle Flower – Nesting Square dies, My Creative Time – Ribbon End Dies

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Cuttlebug

Image coloured with Copic Markers:

Snowman: B60, C9, C7, C5, C00, E49, YR18, YR16, YR12, Colorless Blender (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Hats, Mitts and Scarf: B99, B977, B95

Coat: E51, E50, E37, E35, E34, E33, E31

Birds: E59, E37, E35

Fence: E29, E27, E25, E23, E21

Wheel and Rope: E77, E74, E47, E44, E43, Y35, YR31

Sky: B04, B02, B01, B00

Snow: B000, B60, C00, Colorless Blender, Stickles – Diamond

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Live Life!!


It’s Wednesday, and this week, I’m sharing a card I made from the High Hopes Rubber Stamps “Mix It Up Release”  using Sports Car 1 – SS048 for the main image and Live Life – GG037 for the sentiment! It would be great to win a lottery and drive something similar to this awesome car! Then, I could rent a race track and speed around it. That would be sooooo much fun! LOL!

To make my card this week, I stamped the image and sentiment using my MISTI and Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers and then fussy cut around it and set it aside. A piece of Copic Marker X-Press It Blending Card was cut to the size of 5.5″ x 4.25″ for me to create my background. The background was also coloured in with Copic markers. Next, I die cut the background using my Cuttelbug and My Creative Time – Rectangle Frame Layers. The sentiment was die cut with Waffle Flower – Nesting Square dies and for the outer square, My Creative Time -Stitched Squares Inside and Out die was used. Tim Holtz Distress Ink – Chipped Sapphire was used to ink around the edges of both squares.

To assemble the card, 3M VHB – 2 sided tape was attached to the backs of the car image, sentiment and larger blue square. The background coloured image was adhered directly to the base card of The Paper Studio – Primary Simply Solids (4.25″ x 5.5″). The car and the sentiment were than attached onto the main background.

Card Recipe:

Stamp: Sports Car 1 – SS048 (High Hopes Rubber Stamps)

Sentiment: Live Life – GG037 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Chipped Sapphire

Die Cuts: My Creative Time – Rectangle Frame Layers, Waffle Flower – Nesting Square dies, My Creative Time -Stitched Squares Inside and Out

Paper: Copic Marker X-Press It Blending Card, The Paper Studio – Primary Simply Solids (4.25″ x 5.5″), Blue cardstock

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Sports Car: B39, B37, B14, B12, B000, C10, C8, C6, C5, C3, C1, C0

Mountains: BV23, BV20, C7, C5, C3, C1, B000

Sky and Fence: B00, B000, B000, Colorless Blender

Roadway: E74, E71, E70, BV23, BV20, W2, W0, C7, C5, C3, C1, C0, C00, B00, Rubbing Alcohol, Q-Tip

Check out some other fun new returning stamps from the Mix It Up Release here:
Mix It Up Release – High Hopes Rubber Stamps (highhopesstamps.com)

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Surfing Gabriel!!


It’s Wednesday, and this week, I made a masculine card using Surfing Gabriel – TT516 by High Hopes Rubber Stamps for the main image and No Waves – FR011 (High Hopes Rubber Stamps) for the sentiment. Gabriel is enjoying the waves and the bright skies. I can’t wait for the weather to warm up here so that I can start swimming again too!

To make my card this week, I die cut a square from Copic Marker X-Press It Blending Card using My Creative Time -Stitched Squares Inside and Out. A larger square was cut using Waffle Flower – Nesting Square dies and spare blue cardstock. The image and sentiment were both stamped using my MISTI and Memento – Tuxedo Black ink. I coloured in the image with Copic markers. Then, I created a mask and put it over top of the coloured image and added in my clouds using various Tim Holtz inks listed below and Avery Elle – Pierced Clouds Die (Used to create stencils). To create the spray on the waves, I mixed a little bit of FolkArt – Extreme Glitter Acrylic Paint and Delta Ceramcoat – White paint and applied it to the coloured image using a 1/4″ H.J. Domed Dry Stipple brush. For a little extra sparkle, I added some DecoArt Glamour Dust while the paint was still wet.

Brother Scan and Cut was used to die-cut around the sentiment. Edges were inked with Tim Holtz Distress Ink – Blueprint Sketch. A second circle was die cut using Lifestyle Crafts Cutting Dies – Nesting Circles out of aqua cardstock and inked with Tim Holtz Distress Inks – Peacock Feathers.

To assemble the card, I used Recollections – Winter 4.25″ x 5.5 for the base. Tim Holtz Distress Ink – Salty Ocean was used to ink around the edges of the card. The coloured image was glued to the larger square and the sentiment was glued to the larger circle. 3M VHB – 2 sided tape was attached to the backs of the larger circle and square and attached to the base card. To finish it off, YNS Gumdrops were added.

Card Recipe:

Stamp: Surfing Gabriel – TT516 (High Hopes Rubber Stamps)

Sentiment: No Waves – FR011 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Ranger Distress Ink – Broken China, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Inks – Peacock Feathers

Paper: Copic Marker X-Press It Blending Card, Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards), Aqua cardstock, Blue cardstock

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Waffle Flower – Nesting Square dies, Lifestyle Crafts Cutting Dies – Nesting Circles

Stencil: Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie (Used to create stencils)

Tools: MISTI – Most Incredible Stamping Tool, Picket Fence – Blending Brush, 1/4″ H.J. Domed Dry Stipple, YNS Gumdrops, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20 (Eyes: Sakura Glaze – Black, Gelly Roll Sakura #8 Pen)

Hair: E47, E44, E43, E40

Swim Trunks: B79, B69, B66, YG03, YG01

Surf Board: Y38, Y17, Y15, YR18, YR16, BG57, BG32, BG11

Water: BG70, B93, B91, B52, B41, B06, B02, B01, B000

Water Droplets: B06, B02, B00

Sentiment: B000

Foamy Water: FolkArt – Extreme Glitter Acrylic Paint, Delta Ceramcoat – White, DecoArt Glamour Dust

Check out some other fun new stamps from the vault for Boys and Men here:
THE VAULT IS OPEN! MEN & BOYS RELEASE Archives – High Hopes Rubber Stamps (highhopesstamps.com)

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.