Tag Archive | W R Memory Keepers – Crop-A-Dile Corner Chomper

Spring is in the Air!!

Mar22

It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Turtle Stack – TLF035 for the image and Spring Is In The Air – FDG036 for the sentiment. Really loving the New Spring Release called “This and That” at High Hopes Rubber Stamps! This image could also be used for birthday’s too.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″. I attached Scrapbook.com – Playful Smooth Cardstock to the base using double-sided tape. Using W R Memory Keepers – Crop-A-Dile Corner Chomper – I cut the corners using the 1/4″. Using my Cuttlebug and Hero Arts – Infinity Dies – Rounded Rectangle, I die cut the following papers: Scrapbook.com – Jewels Smooth Cardstock, Your Next Stamp – Happy Spring cardstock and Copic Marker X-Press It Blending Card. I inked around the edges of the base card with Tim Holtz Distress Ink – Fossilized Amber and around the floral background with Tim Holtz Distress Inks – Peeled Paint. I applied U-Line double-sided tape onto the floral background and solid green background and popped up both onto the base card. I stamped the image onto the small rectangle that I had cut out of the Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black. The sentiment was also stamped with the same ink and then fussy cut. I inked around the sentiment with Tim Holtz Distress Inks – Peeled Paint and set it aside for later. The image was coloured in with Copic Markers. I applied multiple layers of U-Line double-sided tape to the back of the sentiment and applied one layer to the back of the main image and popped them both up on the card. Lastly, I added some pop-dots to complete the card.

Card Recipe:

Stamps: Turtle Stack – TLF035 (High Hopes Rubber Stamps)

Sentiment: Spring Is In The Air – FDG036 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Fossilized Amber, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Scrapbook.com – Playful Smooth Cardstock (4.25″ x 5.5″), Scrapbook.com – Jewels Smooth Cardstock (4.25″ x 5.5″), Your Next Stamp – Happy Spring (6″x6″)

Die Cuts: Hero Arts – Infinity Dies – Rounded Rectangle (DI465)

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cuttlebug, W R Memory Keepers – Crop-A-Dile Corner Chomper

Image coloured with Copic Markers:

Turtles: YG67, YG17, YG08, YG03, YG01, E87, E84, E44, E43, E42, E15, Y35, Y08, YR24, G99, G94, G21, G07, G03,  C1

Sky: B02, B01, B00, B000

Grass: Y13, Y03, Y01

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Christmas Dragon

Nov23

Come and check us out on Passionate Paper Creations & Friends FB group
as we are currently sponsoring Lee Holland Art,  Lee Holland Illustration Inspiration Facebook Group for the month of November.

Check out the Etsy store for more fantastic designs from Lee Holland Art. You can click on any of the links above or you can click here too:  https://www.etsy.com/ca/shop/leehollandart. There is a 50% off Black Friday sale going on. You should check it out!

Jump over to Passionate Paper Creations & Friends. Not a Member? Come Join! https://bit.ly/2VwG9iz.

If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Lee Holland Art has been sponsoring us throughout the month of November at  Passionate Paper Creations & Friends FB group site!! Today, I’m featuring this adorable dragon image from Lee Holland Art called Reindeer Antlers Christmas Dragon. Thank you Lee Holland Art for sponsoring us and having such amazing fun designs to choose from. I love all of your little dragons.

 

For the base card, I used AC Cardstock – White and cut it and scored it to be 6″ x 6″. For the background, I cut Creative Memories – Mermaid Cove Designer Paper to the same size as the base card. The image using HP High Quality Grayscale was printed onto Copic Marker X-Press It Blending Card. Using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider dies, the printed image and Hot Buy – Recollections Ombre Brights Paper were both die cut. The sentiment was stamped using my Misti, VersaMark Ink and sentiment stamps from Lawn Fawn – “Offset Sayings – Christmas” and Lawn Fawn “Winter Skies”. Ranger Super Fine Gold Embossing powder was applied to the stamped sentiments and then heat set with a Marvy Uchida – Embossing Heat Tool.

I cut the sentiment down to be 3-3/8″ x 1-2/8″ and then used W R Memory Keepers – Crop-A-Dile Corner Chomper to create .25″ corners. Using a Sharpie – Gold Medium Point – Water Based Paint pen, I went around all of the edges of the cuts with the exception of the image die cut. The image was coloured in with Copic markers and then I used a Gelly Roll Sakura #10 Pen to create the snow in the sky and a combination of Stickles – Crystal, Stickles – Waterfall and Cosmic Shimmer Fluffy Stuff which was applied prior to the Stickles being added.

The card was now ready to be assembled. I applied U-Line double-sided tape to the backs of the coloured image and cut frame to pop them up. I doubled up the tape for behind the sentiment. The base paper was applied directly to the card base using double-sided tape. I peeled off the tape from the backings of the elements and popped them all up onto the base card to finish it off.

Card Recipe:

Stamp: Reindeer Antlers Christmas Dragon – Lee Holland Art

Sentiments: Offset Sayings – Christmas – Lawn Fawn,  Winter Skies – Lawn Fawn

Inks: HP High Quality Grayscale, Versamark

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Creative Memories – Mermaid Cove Designer Paper Pack, Hammermill – Premium Colour 100 lb., Hot Buy – Recollections Ombre Brights Paper Pack (12″ x 12″)

Die Cuts: Essentials by Tattered Lace Dies – Easel Slider

Miscellaneous: U-Line double-sided tape, Sharpie – Gold Medium Point – Water Based Paint, Stickles – Crystal, Stickles – Waterfall, Gelly Roll Sakura #10 Pen, W R Memory Keepers – Crop-A-Dile Corner Chomper Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Dragon: BG72, BG57, BG32, BG11, BG09, BG05, BG02, BG01, V15, V12, V06. V000, G14, YG23, YG11, YG03, YG01

Box: E27, E25, E23

Ornaments: R59, R37, R35, E15, Y35, YR24, Y08, YG67, YG17, YG21, E35, E34, E33, E31

Sky: B05, B04, B02, B01, Gelly Roll Sakura #10 Pen

Snow: B60, C1, Stickles – Crystal, Stickles – Waterfall, Cosmic Shimmer Fluffy Stuff

Hope you like it and have a great week!

You Are My Son, Moon and Stars!!

Nov15

Sharing a card I made today using KLM Digital Designs –  L’il Boy Gnome from the new November release. This image also comes with 2 more sayings: “Happy Birthday” and “You’ll outgrow my lap, but never my heart!”.

To make the card, I first imported the image and sentiment into Microsoft Word. I added in an oval circle with a 2 pt border and placed it behind the sentiment to give me a guide line for where to cut when printed out. I printed them out onto Copic Marker X-Press It Blending Card. I used my Brother Scan and Cut to cut out the main image and I fussy cut out the moon. I coloured in the image and moon with Copic markers.

The base was created with Hammermill – Premium Colour 100 lb. cardstock cut and folded to the size of 5.5″ x 4.25″. I attached the background pattern paper from Hunky Dory Crafts – Mirri Card – Starry Galaxies, cut to the same size as the base with double-sized tape. I ran the moon through my Xyron Create a Sticker and placed it onto the starry background and then cut off the excess around the bottom of the card. I added in some stickers onto the background using Forever In Time – Foil Fancy Stickers – Outer Space. The boy was added using U-Line double-sided tape to pop him up onto the card. To finish everything off and complete the card, I used W R Memory Keepers – Crop-A-Dile Corner Chomper to create .5″ rounded corners.

Card Recipe:

Stamp and Sentiment:  L’il Boy Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hunky Dory Crafts – Mirri Card – Starry Galaxies – 8.25″ x 11.5″

Miscellaneous: U-Line – 2 sided tape, Xyron Create a Sticker, Brother Scan and Cut, Forever In Time – Foil Fancy Stickers – Outer Space (SS171C), W R Memory Keepers – Crop-A-Dile Corner Chomper

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E47, E44, E43

Hat and Overalls: B26, B23, B21, C3, C2, C1

T-Shirt: BV02, BV01, V20

Boots: E53, E51, E50, E27, E25, E23, E21

Moon and Shadow: T3, T1, T0

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.