Tag Archive | Boy

Reading Away The Afternoon!


Today, I’m featuring a CAS card I made using Reading Away The Afternoon – D19043  from Dreamerland Crafts.  These 2 little friends are enjoying a wonderful day just relaxing and sharing time together! There’s nothing like holding a real book in your hands. I know that today there a lot of e-books, but I’m old fashioned and still love to sit back and relax and hold onto a real book. How about yourself? Do you prefer a real book or e-books?

To make this card I used a white base card from “Studio g” of 5″ x 5″. The sentiment was stamped directly to the base using my MISTI, Versa Fine – Onyx Black and Kraftin’ Kimmie – Reading Lexi stamp. The sentiment was then embossed with Ranger – Clear Super Fine Detail embossing powder and Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

The background and image were die cut using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider dies. I adhered the larger die cut directly to the base using double-sided tape.

I stamped the image onto the smaller die-cut and then stamped it again on some Post-it note to create a mask. Tim Holtz Distress Ink – Salty Ocean was used along with stencils I created from Avery Elle – Pierced Cloud Die. Then the grass was added in. To create texture on the grass, I used some rubbing alcohol and a piece of old rag with some ridges on it.

Once the background was completed, I coloured in the main image with Copic markers. The grass had also been coloured in with the same markers. The image was then popped up onto the base using 3M VHB – 2 sided tape.

Card Recipe:

Stamp:  Reading Away the Afternoon – D19043 (Dreamerland Crafts)

Sentiment: Kraftin’ Kimmie – Reading Lexi

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Studio g – AC0225, Green Cardstock

Die Cuts: Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie, Essentials by Tattered Lace Dies – Easel Slider

Embossing Powder:  Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000

Hair: E47, E44, E43

Shirt:  YG97, YG95, G24, E23

Pants: B26, B24, B21

Boots: E27, E25, E23, E21

Rabbit: N0, R30, Colorless  Blender

Books: BG15, BG13, BG11, R08, R05, R02, BG02, BG01, BG00, C2, C1, C0

Tree: E57, E55, E37, E35, E34, E25, E23

Grass: YG17, YG13, YG03, YG01

Sky: Tim Holtz Distress Ink – Salty Ocean, Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Dreams Take Flight!!


Today, I’m featuring a card I made using Embrace Your Dream – D19039  from Dreamerland Crafts. My dad always dreamed of flying and he would build all kinds of model airplanes. Then one day he decided to build a real plane with the assistance of his brother and a friend. It took them a long time, but in the end it was a beautiful plane and the best part was that we were all taken for rides in it. It’s an experience we will never forget. So just as my dad followed his dreams, he taught us all to follow our dreams as well. If you dream about something long enough, eventually it will become a reality for you. So never be afraid to follow your dreams.

 

To make this card I used a white base card of 4.25″ x 5.5″. The background was die cut using My Creative Time – Rectangle Frame Die Layers – MCT-D274 and my Cuttlebug. The paper is from Doodlebug Design Inc. – I Love Travel. Once die cut, the edges were inked around using Tim Holtz Distress Ink – Salty Ocean. I also used this colour to do the clouds in the sky on the image. I adhered the background to the base using glue so that I could move it around to fit better.

The sentiment was stamped using my MISTI, VersaMark ink and Ranger Embossing Powder White – Extra Fine Detail and the stamp from Kraftin’ Kimmie – Sky’s The Limit. The powder was then heat embossed with Marvy Uchida – Embossing Heat Tool. It was die cut using My Creative Time – Sentiment Label Dies.

The image was die cut using My Creative Time – Bunch of Fun Circle Dies from Copic Marker X-Press It Blending Card. The circle behind the main image was die cut with My Creative Time – More Stitched Circles MCT-D136 from black cardstock. I coloured in the entire image with Copic markers and then created a mask. I added in the clouds and used a small piece of old rag and some rubbing alcohol to create some texture in the grass.

To assemble the card, I ran the main image through Xyron Creative Station to make like a sticker and so that it would lay completely flat on the black circle. 3M VHB – 2 sided tape was used to pop up the main image and sentiment to complete the card.

Card Recipe:

Stamp:  Embrace Your Dream – D19039 (Dreamerland Crafts)

Sentiment: Kraftin’ Kimmie – Sky’s The Limit

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, VersMark

Paper: Copic Marker X-Press It Blending Card, Doodlebug Design Inc. – I Love Travel (6 x 6), Black cardstock White cardstock

Die Cuts: My Creative Time – Bunch of Fun Circle Die, Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie, My Creative Time – Rectangle Frame Die Layers – MCT-D274, My Creative Time – Sentiment Label Dies – MCT-D139, My Creative Time – More Stitched Circles MCT-D136

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, Xyron Creative Station, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000

Hair: E47, E44, E43

Jacket:  E37, E35, E34, E33

Pants: E87, E84, E81

Boots: N8, N6, N4, E53, E51, E50

Goggles: E37, E35, E33

Scarf and Helmet: E33, E31, E30

Gloves: E79, E77, E74

Airplane: C5, C3, C1, C0, Y08, Y04

Grass: YG17, YG13, YG03, YG01

Sky: Tim Holtz Distress Ink – Salty Ocean, Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Birthday Message For You!


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a birthday card that I made using a combination of Dreamerland Crafts stamps.  A Special Message For You – D16001 was used for the boy image and sentiment, Mailbox & Wall – Mix & Match Collection – M18301 and  Window & Gate – Mix & Match Collection – M18302 were used to create the background. I just love how these stamps came together to help me to create this scene.

 

To make this card I used a base card of 6″ x 6″. I die cut X-Press It Blending Card using my Cuttlebug and dies from Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B. I used the square die that was about 5.75″ x 5.75″.

Next, I created a mask of each of the stamps I was going to use to create the scene. The boy was stamped first and then I placed the mask over top of him. Next was the gate, then the brick wall and the foliage.  I added the masks after stamping each piece. Lastly, I stamped the 2 windows. All masking was removed at this point.

To create the main building brick wall, I used Kraftin’ Kimmie Stencil – Brick Wall. Using my magentic mat, small magnets were used to hold the stencil down over the image. Then Copic markers were used to create the texture of the brick. Once all of the brick was done, C4 and C2 were used to fill in the spaces in between. I drew in the sidewalk using a combination of C0 – C5 markers.

After all of the main colouring was done, Tim Holtz Distress Ink – Blueprint Sketch was used to stamp the sentiment. Then, because I was using my MISTI, it was easy to then re-ink the sentiment with Versamark ink and then emboss it with Ranger – Clear Super Fine Detail embossing powder. Marvy Uchida – Embossing Heat Tool was used to heat up the embossing powder.

Card Recipe:

Stamps:  A Special Message For You – D16001 (Dreamerland Crafts), Mailbox & Wall – Mix & Match Collection – M18301 (Dreamerland Crafts), Window & Gate – Mix & Match Collection – M18302 (Dreamerland Crafts)

Sentiment: A Special Message For You – D16001 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Blueprint Sketch, Versamark

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card

Die Cuts: Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Stencil: Kraftin’ Kimmie – Brick Wall Stencil

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair:  E47, E44, E43

Shirt: YG97, YG95, G21

Pants: B26, B23, B21

Boot: E29, E27, E25, E23, E21

Main Building Brick Wall: E37, E35, E08, E04, C4, C2, Kraftin’ Kimmie – Brick Wall Stencil

Lower Brick Wall: E53, E51, E44, E43, E34, E31, E30, BV23, BV20

Gate: E39, E37, E34, E31

Foliage and Flowers: YG17, YG13, YG03, YG01, G07, V17, V15

Window and Ledgings: E44, E43, E31, E30, E27, E25, E23, E21, E42, E41, E40

Sidewalk: C4, C3, C2, C1, C0

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Wishing You the Sweetest Things!


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing Dreamerland Craft Stamps Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar and Love The Music From My Guitar – D172006! This little boy loves his guitar and all of the animals love his music.

To make his card, I stamped all of the images using my MISTI, Memento – Tuxedo Black ink and Copic Marker X-Press It Blending Card. I coloured in all of the images using Copic markers and then used my Cuttlebug and all of the die cuts from Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar (Dreamerland Crafts Clear Stamps). I also die cut the sentiment at the same time and stamped it with Versa Fine – Onyx Black and then heat embossed it using Marvy Uchida – Embossing Heat Tool and Ranger – Clear Super Fine Detail embossing powder..

I was now ready to do the background. To achieve this I cut several die cuts using Monte Mart A4 Watercolour Book paper, Lawn Cuts – Simple Stitched Hillside Borders – Lawn Fawn and Your Next Stamp – Stitched Rectangle Die Set (YNSD214).

For the sky I used several Tim Holtz Blue inks in various shades listed below using a stencil that I had created from Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie. For the grass I used various shades of Tim Holtz green inks – (see below).

I ran all of the die cuts and the back 2 layers of grass through Xyron Creative Station. Then I set them all aside.

I was now ready to assemble my card. I layered the first 2 die cuts onto the main die cut and then popped up the bottom grass cut with 3M VHB – 2 sided tape. I then added on the characters that I made stickers out of for easy assembly. I popped up the upper half of the little dog with 3M VHB – 2 sided tape. Once the scene was completed I mounted it onto 5.25″ x 4.25″ white cardstock.

Card Recipe:

Stamps and Sentiment: Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar (Dreamerland Crafts Clear Stamps), Love The Music From My Guitar – D172006 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Clouds: Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Broken China

Grass: Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Bundled Sage, Tim Holtz Distress Ink – Twisted Citron, Tim Holtz Distress Inks – Peeled Paint

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Mont Mart A4 Watercolour Book paper – Acid Free – 190 GSM, Recollections – White Cardstock

Die Cuts:  Your Next Stamp – Stitched Rectangle Die Set (YNSD214), Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar (Dreamerland Crafts Clear Stamps), Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E47, E44, E43

Shirt: BG49, BG45, BG34

Pants: B26, B23, B21

Guitar: E99, E97, E93, E51, E35, E33, E31, YR27

Bird: B04, B02, B00, Y38

Dog: E35, E34, E33, E31

Rabbit: C7, C5, C3, R30, R02

Cat: W9, W7, W5

Pig: E93,E04, R20, R00, R000, E44, E04

Background: B04, B02, B00

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.