Tag Archive | Essentials by Tattered Lace Dies – Easel Slider

Reading Away The Afternoon!


Today, I’m featuring a CAS card I made using Reading Away The Afternoon – D19043  from Dreamerland Crafts.  These 2 little friends are enjoying a wonderful day just relaxing and sharing time together! There’s nothing like holding a real book in your hands. I know that today there a lot of e-books, but I’m old fashioned and still love to sit back and relax and hold onto a real book. How about yourself? Do you prefer a real book or e-books?

To make this card I used a white base card from “Studio g” of 5″ x 5″. The sentiment was stamped directly to the base using my MISTI, Versa Fine – Onyx Black and Kraftin’ Kimmie – Reading Lexi stamp. The sentiment was then embossed with Ranger – Clear Super Fine Detail embossing powder and Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

The background and image were die cut using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider dies. I adhered the larger die cut directly to the base using double-sided tape.

I stamped the image onto the smaller die-cut and then stamped it again on some Post-it note to create a mask. Tim Holtz Distress Ink – Salty Ocean was used along with stencils I created from Avery Elle – Pierced Cloud Die. Then the grass was added in. To create texture on the grass, I used some rubbing alcohol and a piece of old rag with some ridges on it.

Once the background was completed, I coloured in the main image with Copic markers. The grass had also been coloured in with the same markers. The image was then popped up onto the base using 3M VHB – 2 sided tape.

Card Recipe:

Stamp:  Reading Away the Afternoon – D19043 (Dreamerland Crafts)

Sentiment: Kraftin’ Kimmie – Reading Lexi

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Studio g – AC0225, Green Cardstock

Die Cuts: Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie, Essentials by Tattered Lace Dies – Easel Slider

Embossing Powder:  Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000

Hair: E47, E44, E43

Shirt:  YG97, YG95, G24, E23

Pants: B26, B24, B21

Boots: E27, E25, E23, E21

Rabbit: N0, R30, Colorless  Blender

Books: BG15, BG13, BG11, R08, R05, R02, BG02, BG01, BG00, C2, C1, C0

Tree: E57, E55, E37, E35, E34, E25, E23

Grass: YG17, YG13, YG03, YG01

Sky: Tim Holtz Distress Ink – Salty Ocean, Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Happy Trick or Treating!


It’s Wednesday, and today I’m sharing a CAS card using Witchy Poo with Kitty Frame – P120 (High Hopes Rubber Stamps) for the main image and Trick or Treat Greeting – H231 (High Hopes Rubber Stamps) for the sentiment. Witchy Poo and Kitty are looking out to see all of the wonderful little trick or treaters coming to visit them for their treats! What are you dressing up as this year?

To make the card, I started with a 5.5″ x 4.25″ cards base. My Mind’s Eye – Dolled Up – 6″ x 6″ was cut to the same size and adhered to the base card with double-sided tape. Tim Holtz Distress Ink – Walnut Stain ink was used to edge across the bottom of the card. The image was stamped and then coloured in with Copic Markers. I used my Brother Scan and Cut to cut around the image and then used a black marker to go around all of the edges.

The sentiment was stamped and then die cut with Essentials by Tattered Lace Dies – Easel Slider. Tim Holtz Distress Ink – Carved Pumpkin and a black marker were used to ink all of the 4 sides of the sentiment.

The coloured image and sentiment were popped up onto the card using 3M VHB – 2 sided tape and some stickers were add for embellishments.

Card Recipe:

Stamp: Witchy Poo with Kitty Frame – P120 (High Hopes Rubber Stamps)

Sentiment: Trick or Treat Greeting – H231 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Carved Pumpkin, Tim Holtz Distress Ink – Walnut Stain

Paper: Copic Marker X-Press It Blending Card, My Mind’s Eye – Dolled Up – 6″ x 6″, Orange Cardstock

Die Cut: Essentials by Tattered Lace Dies – Easel Slider

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Hallowe’en Stickers – HCM0001F, HCM0001C, HCM0001A, Brother Scan and Cut

Image coloured with Copic Markers:

Skin: BG96, BG93, BG90, YG23, G40, R22, R20

Hair: E18, E08, YR18, YR14

Hat and Dress: V25, V17, V15, V09, V06, V04, YR68, YR65, YR18, YR15, YR12, YR00, Gelly Roll Sparkle Pen for Swirls

Cat: C9, C7, C5, C3, YG09, YG07, YG03, Y02, R22, R02, R00

Moon and Stars: V17, V15, V09, V06, V04

Window Background: E15, Y38, Y35, Y15, Y06

Window Frame: E29, E25, E23

Hope you like it and have a spooktacular week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Beautiful Mindset


Today I’m sharing a CAS card that I made using  Nesting Bird (KLM Digital Designs).  This image from KLM Digital Designs new August release comes with 3 beautiful sentiments “Create Your Own Sunshine” and “Hope You Have A Beautiful Day” and the one I’ve featured with my card. These sentiments and stamp could be used for an Inspirational or Birthday Card! I just love the feeling of peace that this image gives me.

The image and sentiment were printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. This prevents the image from smearing when you go to colour it in. The image and sentiment were die cut with my Cutttlebug and dies from Essentials by Tattered Lace Dies – Easel Slider. The base of the card is 5.5″ x 5.5″. I cut some Momenta – Cardstock at the same size. To go around the background paper and die cuts, a Sharpie – Gold Medium Point – Water Based Paint marker was used. This helps give the illusion that it is mounted on gold paper. I adhered the background directly to the base card with glue so that I could move it into place easier.

The image was coloured in with Copic markers and for the eye of the bird a Sakura Glaze – Black pen was used. Then, the completed image was glued directly on top of the background. The sentiment was popped up with 3M VHB – 2 sided tape. To finish off the card, some Kraftin’ Kimmie – Rainy Day Dots were added.

Card Recipe:

Stamp and Sentiment: Nesting Bird (KLM Digital Designs)

Inks: HP Printer High Quality Grayscale, Sharpie – Gold Medium Point – Water Based Paint, Sakura Glaze – Black

Paper: Copic Marker X-Press It Blending Card, Momenta – Cardstock

Die Cuts: Essentials by Tattered Lace Dies – Easel Slider

Miscellaneous: Kraftin’ Kimmie – Rainy Day Dots, 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Flowers: BV17, BV13, BV11, BV000, E15, Y38, Y18, Y04

Leaves: BG99, BG93, G21, YG23

Bird: E99, E97, YR20, YR16, YR15, YR12, Y32, B39, B14, B12, B06, B05, BG01, C8, C5, C3, C1, C0, Rubbing Alcohol, Q-Tip

Background: Y00, Y000, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

The Song of Birds


It’s Wednesday, and this week, I used Bluebird – TLF015 from High Hopes Rubber Stamps new release for the main image and Kiss of the Sun – H223 (High Hopes Rubber Stamps) for the sentiment. I just fell in love with this image and sentiment and knew it was the perfect combination for a slim line card.

Closer Look: Blue Bird

Closer Look: Poem

For my card this week, I stamped the images and sentiment onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. The main image was die cut using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider. The sentiment was die cut using My Creative Time – Rectangle Frame Dies and My Creative Time – Rectangle Frame Layers. The image was coloured in with Copic markers. Once all of the colouring was completed, I went around all of the die cuts with a Sharpie – Gold Medium Point – Water Based Paint pen.

I decided to make this a slim line card starting out with a white card base sized at 8.75″ x 4″. I just received some new Cosmic Shimmer Pixie Powders and just had to try them out. So I cut some Monte Marte – Watercolour Book – 190 GSM paper the same size and started playing. This background is the one that I decided to go with. I just loved the way it picked up some of the same colours as the flowers. The powder was easy to use. You just sprinkle some powder on the paper and spritz with water. You can’t really make it out in the photo, but the paper actually has a beautiful pearlesque look to it. I also went around all of the sides of the base with the Sharpie pen as well. I then popped up the sentiment and coloured image with 3M VHB – 2 sided tape and added some embellishments.

When I went to decorate the little flower embellishments with Stickles – Yellow, some accidentally went onto my background paper.  I decided I really liked the look and then just added it everywhere using the tip of my stylus.

Card Recipe:

Stamp:  Bluebird – TLF015  (High Hopes Rubber Stamps)

Sentiment: Kiss of the Sun – H223 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Cosmic Shimmer Pixie Powder – Candy Pink

Paper: Copic Marker X-Press It Blending Card, Monte Marte – Watercolour Book – 190 GSM, Hot Pink cardstock

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers, Essentials by Tattered Lace Dies – Easel Slider

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Craft – Rhinestone Stickers, Sharpie – Gold Medium Point – Water Based Paint

Image coloured with Copic Markers:

Flowers: RV17, RV04, RV02, RV000, E15, Y38, Y15, Y04

Leaves: YG67, YG17, YG09

Branches: E31, E29, E23

Bird: E99, E97, YR20, YR16, YR15, YR12, Y32, B39, B14, B12, B06, B05, BG01, C8, C5, C3, C1, C0, W5, W3, W1, Colorless Blender

Background: Y02, Y00, Y000, Q-Tip, Rubbing Alcohol

Main Background: Cosmic Shimmer Pixie Powder – Candy Pink, Stickles – Yellow, Forever In Time Bling Tape – Floral, Water Spritzer

Hope you like it and have a fantastic week!

Be sure to check out all of the fun new images on the High Hopes website. You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Happy Holidays!


Welcome Back Dreamerland Craft Fans!

Dreamerland has just released some brand new stamps for their 2019 Christmas release and today, I’m sharing Happy Holidays (Dreamerland Crafts Clear Stamps)!  The image was coloured with copic markers.

Card Recipe:

Stamp and Sentiment: Happy Holidays (Dreamerland Crafts Clear Stamps)

Inks: Memento – Tuxedo Black, VersaMark ink, Tim Holtz Distress Ink – Evergreen Bough

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Paper: Copic Marker X-Press It Blending Card, Pebbles Winter Wonderland 6″ x 6″, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts:  Essentials by Tattered Lace Dies – Easel Slider

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Washi Tape

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E49, E47, E43

Hat and Coat: BG57, BG53, BG49

Scarf and Mitts: BG78, BG72, BG70

Pants: B26, B23, B21

Boots: E18, E17, E15, E13

Bear: E18, E17, E15, E13, E55, E53, E51, R22, R20

Sled: E15, Y38, Y35, Y15, R59, R37, R35, C3, C1, C0

Sky: B99, B97, B95, B93, B91, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #8 Pen

Snow: BV20, C1, Colorless Blender, Spectrum Noir – Sparkles – Crystal Clear, Stickles – Icicle

 

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Get Well Chick!!!


Welcome OCS Fans!

Today is Wednesday and I’m sharing a Get Well Card where this little chick is floating in to send well wishes from the latest High Hopes Get Well Release! The stamp is called Get Well Chick by High Hopes Rubber Stamps.

I started out by using my Cuttelbug and die cut Copic Marker X-Press It Blending Card using the dies from Essentials by Tattered Lace Dies – Easel Slider. Next I stamped the image using Memento – Tuxedo Black and my MISTI – Most Incredible Stamping Tool. I used Copic Markers to colour in the image and then created my own sky and clouds for the background.

Card Recipe:

Stamp: Get Well Chick TT170 (High Hopes Rubber Stamps)

Paper: Forever In Time – Perfect Prints – Mermaid (6 x 6 in \ 15 x 15 cm)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Chipped Sapphire

Copic Markers:

Duck: Y15, Y08, Y02, Y00, E15, YR18, YR14, R22, R21,Sakura Glaze – Black, Gelly Roll Sakura #8 Pen

Water: B39, B34, B32, BG15, Colourless Blender

Sky: B04, B02, BG02, BG01, BG000. BG70

Clouds: BG70, BG000, N0

Balloons: G17, G14, YG41, G00, V06, V05, V04, V000

Sign: E53, E51, E50, V06, V04

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

 

Blooming Friends!


Welcome OCS Fans!

Today is Wednesday and Spring is in the air! The snow has finally melted and now I can’t wait for the flowers to start blooming and adding some colour to our yard and other yards around us!

For today’s card I’m sharing Blooming Friends by High Hopes Rubber Stamps. I’m pretty sure this little girl and hedgehog are probably talking about the beautiful flowers and what a gorgeous spring day it is outside! I coloured in the card with Copic Markers and to finish the scene, I added in some clouds and made the grass look like she was up on a hilltop.

Hope you like it and have a wonderful spring!

Card Recipe:

Stamp: Blooming Friends TT031 (High Hopes Rubber Stamps)

Paper: Recollections – Petite Floral – Double Sided 12 x 12 in (30.4 x 30.4 cm), Copic Marker X-Press It Blending Card

Ink: Tim Holtz Distress Inks – Dusty Concord, Tim Holtz Distress Ink – Wilted Violet, Memento – Tuxedo Black

Die Cuts: Essentials by Tattered Lace Dies – Easel Slider

Tools: MISTI – Most Incredible Stamping Tool

Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E50, YR21, Y26, E44

Blouse: V20, V22, V25

Pants: B06, B04, B02

HedgeHog: R02, R01, E79, E37, E25

Rock: W7, W5, W3, E79

Leaves: G14, G17, G07

Flowers: RV02, RV00, RV10, V06, V04, V01, Y08, B41, B34, B32

Sky: B0000, B000, B00, B01, BV20, BV0000, Colourless Blender

Grass: YG25, YG07, G43

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.