Archive | October 18, 2022

Snow Kisses!!

Oct18

It’s Wednesday, and this week, I made a snow lady Christmas card using High Hopes Rubber Stamps Snow Kisses – TT059 for the main image and Holly Jolly – K048 for the sentiment. I’ve always loved snow people and birds and this stamp combo makes me smile because it has both.

To make my card this week, I began with a card base of AC Cardstock – White, cut and scored to be 6″ x 6″. I cut 2 strips of Doodlebug Design Inc. – Winter Wonderland coloured snowflake pattern to the size of 6″ x .75″. 2 strips of Doodlebug Design Inc. – Spring Solid Assortment paper to the size of 6″ x .25″ and 1 strip of Forever In Time – Textura Sky cut to the size of 6″ x 4″. With Tim Holtz Distress Ink – Evergreen Bough and a blending brush, I inked around all of the edges of the larger pieces. I ran all of the smaller pieces through my Xyron Create a Sticker. The pieces were then attached to the base card from top to bottom. I used liquid glue to attach the larger piece. I trimmed around the 3 sides of the card with a paper trimmer to make it all even.

For the frame around the image, using my Couture Creations – Go Power and Emboss die cutting machine, I die cut the entire frame with Doodlebug Design Inc. – Winter Wonderland paper and Penny Black – Graceful Stackers dies. 2 dies were pieced together for the pink frame using my cutting device and Forever In Time – Textura Blush cardstock. Lastly, I stamped the image with Memento – Summer Sky ink onto Lawn Fawn – Sparkle Cardstock in “Pixie Dust” using my MISTI. I took this piece and ran it through my Couture Creations – Go Power and Emboss die cutting machine again so that it would fit snug into the frame. I cut off the remainder following the stamped snow along the top and inked it with the Memento – Summer Sky ink. Using liquid glue, I applied the pink frame over top of the snowflake die cut while carefully matching up the edges. Liquid glue was applied to the lower back of the snow piece and it was attached to the snowflake background inside the frame.

The image was stamped onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. After colouring the images, I fussy cut around all of them and then with a black marker, inked around all of the edges. I popped up the snowlady using U-Line double-sided tape and attached her to the card under the snow. The little bird was also popped up using U-Line double-sided tape and some liquid glue. Using Copic B41, I added in some shadows in the snow and Stickles – Hibiscus was applied to the scarf and pompom to give them some extra sparkle.

The sentiment was stamped onto Doodlebug Design Inc. – Spring Solid Assortment using my MISTI and Versamark ink. Ranger Embossing Powder White – Extra Fine Detail was applied and then heat embossed using a Marvy Uchida – Embossing Heat Tool. Using my Cuttlebug and My Creative Time – More Stitched Circles, I die cut the sentiment. The edges were inked around using a finger dauber and Tim Holtz Distress Ink – Evergreen Bough. The snowflake was cut using my Cuttlebug, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” cardstock and die from Recollections – Christmas Snowflakes Clear Stamp & Die set. I popped up both the sentiment and snowflake using U-Line double-sided tape onto the card. Lastly, I added 3 Doodlebug Designs Inc. – Sprinkles onto the frame to finish it off.

Card Recipe:

Stamps: Snow Kisses – TT059 (High Hopes Rubber Stamps)

Sentiment: Holly Jolly – K048 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Versamark, Memento – Summer Sky

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Doodlebug Design Inc. – Winter Wonderland (6″ x 6″), Doodlebug Design Inc. – Spring Solid Assortment (12″ x 12″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Forever In Time – Textura Sky, Forever In Time – Textura Blush

Die Cuts: Penny Black – Graceful Stackers (51-658), My Creative Time – More Stitched Circles MCT-D136, Recollections – Christmas Snowflakes Clear Stamp & Die 529291

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Stickles – Hibiscus, Cuttlebug, Blending Brush, Doodlebug Designs Inc. – Sprinkles, Xyron Create a Sticker, Couture Creations – Go Power and Emboss, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Snow Lady: BV20, C00, Colorless Blender, YR18, YR12, YR07, YR04, R29, R27, R24, Eyes (Sakura Glaze – Black), Stickles – Hibiscus

Mitt’s, Coat and Hat: BG72, BG57, BG32, BG13, BG11

Scarf and Trim: RV69, RV09, RV06, RV04, RV02

Birds and Earmuffs: B97, B95, B93, B91, R46, R14, R08, YR12, YR07, YR04, R85, R83, R81, RV55, RV17, RV14, BV02, BV01, BV00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Present Gnomes

Oct18

Sharing a Christmas card I made today using KLM Digital Design –  Pre-Colored – Present Gnome – Blue and Pre-Coloured – Present Gnome – Yellow from the new October 2022 release. Christmas is not that far away now and it’s time for me to create more cards for the holidays.

To make my card this week, I started with a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background paper from PhotoPlay – Gnome for the Holidays Christmas to be the same size and attached it to the base card with double-sided tape. I cut some green cardstock to the size of 4-7/8″ x 3-5/8″. U-line double-sided tape was attached to the piece and it was popped up onto the centre of the card. Stampin’ Up – Snowflake Splendor Designer Series Paper was cut to the size of 4.75″ x 3.5″. Using Tim Holtz Distress Ink – Salty Ocean, I inked around the base card and the snowflake piece.

The images were imported into Microsoft Word and I layered them together before I printed them out and fussy cut around them leaving a thin white border. I cut the snow piece to be 4.75″ x 1″ using Lawn Fawn – Sparkle Cardstock in “Pixie Dust” and then tore it look like drifting snow. I glued along the bottom of this piece with liquid glue and adhered it to the snowflake patterned paper. Using liquid glue, I attached the gnomes on top and behind the snow. I applied liquid glue to the finished piece and centred it onto the green cardstock. I stamped the sentiment on to a scrap piece of blue cardstock using Versamark ink and then applied Ranger Embossing Powder White – Extra Fine Detail. This was heat embossed with a Marvy Uchida – Embossing Heating Tool. I die cut the circle using a 1″ Circle punch and then applied Tim Holtz Distress Ink – Salty Ocean around it. U-Line double-sided tape was applied to the back of the sentiment and it was popped up onto the card. Lastly, to finish everything off, some Stampin’ Up – Snowflake Sequins were added around the sentiment.

Card Recipe:

Stamps: Pre-Colored – Present Gnome – Blue – KLM Digital Designs and Pre-Coloured – Present Gnome – Yellow – KLM Digital Designs

Sentiment: Lawn Fawn – Reveal Wheel Holiday Sentiments

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., PhotoPlay – Gnome for the Holidays Christmas, Stampin’ Up – Snowflake Splendor Designer Series Paper, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Die Cuts: 1″ Circle Punch

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: U-Line double-sided tape, Stampin’ Up – Snowflake Sequins, Marvy Uchida – Embossing Heat Tool

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.