Tag Archive | Recollections – Snowflake Specialty Polyester Glitter

Owl – Holidays!

Sep24

Today I’m sharing a Christmas card that I made using KLM Digital Designs – Owl – Santa Hat from the new September 2024 Release. This image also comes with 2 other sentiments, “Merry Christmas” and “Owl I want for Christmas is you” besides the sentiment that I have used one this card.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Light Blue cardstock and Recollections – Christmas Snow Globe Vellum were cut to the same size as the base. The blue cardstock was attached with double-sided tape and the vellum was attached over top of this with liquid glue. The glue was only applied to the bottom of the vellum and then behind some snowflakes where the glue would not show. Lawn Fawn – Sparkle Cardstock in “Pixie Dust” was cut to the size of 4.25″ x 1.5″ and then cut with scissors to create the wavy ground. This was popped up onto the vellum using U-Line Double-Sided Foam Tape. Trees were then added under the hill that were created at an earlier time using my Cricut Explore and .svg files from Miss Kate Cuttables – Snowy Tree using liquid glue.

The image and sentiment were printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers, then fussy cut. Sakura Glaze – Black pen was used to apply the dot in the eye and a black marker was used to go around the entire out-line of the owl. Cosmic Shimmer Fluffy Stuff was then applied to the hat fringe and pompom. A Marvy Uchida – Embossing Heat Tool was used to heat the liquid to create the fluff effect. Using my finger, I dabbed Stickles – Diamond over the top of the fluff on the hat and pompom.  Stickles – Diamond was also applied to the tops of the snow pieces on the trees.

Once the Stickles dried, 2 layers of U-Line Double-Sided Foam Tape and some liquid glue were applied to the back of the image and 1 layer was applied to the sentiment. Both items were popped up onto the card. Lastly, Recollections – Snowflake Specialty Polyester Glitter was placed onto the card to hide where the glue seeped through the Vellum.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Owl – Santa Hat

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Light Blue Cardstock, Recollections – Christmas Snow Globe Vellum (12″x12″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Die Cuts: Miss Kate Cuttables – Snowy Tree (10342) (.svg)

Miscellaneous: Sakura Glaze – Black pen, U-Line Double-Sided Foam Tape, Cosmic Shimmer Fluffy Stuff, Recollections – Snowflake Specialty Polyester Glitter, Stickles – Diamond

Image coloured with Copic Markers:

Owl: Y38, Y35, Y17, Y13, E79, E53, E51, E50, E25, E23, E21, B39, B37, W9, W7,

Hat: BG09, BG05, BG02, BG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Penguins Christmas!!!

Dec24

Sharing another Christmas card I made using It’s Penguining To Look A Lot Like Christmas! by Kraftin’ Kimmie Stamps. Merry Christmas and A Happy New Year from our family to yours!

To make my card this week, I began with a Recollections – Winter 4.25″ x 5.5″ card base. I die cut Copic Marker X-Press It Blending Card and Recollections – Matte Gold Foil cardstock with my Cuttlebug and Creative Expressions – Industrial Chic – Gear Flower dies . With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the die cut. The sentiment was stamped using VersaMark ink and then embossed with Ranger Super Fine Gold Embossing powder. Marvy Uchida – Embossing Heat Tool was applied to the powder to heat emboss it. I cut some notches into the sentiment piece and then inked around the edges with some blue that I still had on a dauber.

The image was coloured in with Copic Markers listed below and then Stickles – Diamond was applied to the ground to add some extra sparkle. Wink of Stella – Clear was applied to the ribbon on the gift. U-Line double-sided foam tape was applied to the back of the die cuts and sentiment and they were all popped up onto the card. Lastly, I applied some small snowflakes from Recollections – Snowflake Specialty Polyester Glitter to complete the card.

Card Recipe:

Stamp and Sentiment: It’s Penguining To Look A Lot Like Christmas! – Kraftin’ Kimmie Stamps

Inks: Memento – Tuxedo Black, VersaMark ink

Paper: Copic Marker X-Press It Blending Card, Recollections – Winter 4.25″ x 5.5″ (Assorted Box of Cards), Recollections – Matte Gold Foil cardstock

Die Cut: Creative Expressions – Industrial Chic – Gear Flower (CED3163)

Miscellaneous: MISTI – Most Incredible Stamping Tool, Gelly Roll Sakura #10 Pen, Wink of Stella – Clear, U-Line Double-Sided Foam Tape, Marvy Uchida – Embossing Heat Tool, Recollections – Snowflake Specialty Polyester Glitter

Image coloured with Copic Markers:

Penguins: W9, W7, W5, W3, W0, E15, YR14, Y17, Y11, RV00, E43, E42, E41, E40, R30, R22

Scarves: BG09, BG05, BG02, R85, R83, R81

Present: E15, YR27, YR24, YR13, Y04, R29, R27, R24, Wink of Stella – Clear

Globe: R39, R35, E35, Stickles – Diamond

Sky: B05, B04, B02, B01

Snow: B00, Stickles – Diamond, Gelly Roll Sakura #10 Pen

Hope you like it and have a fantastic week!

If Kisses Were Snowflakes

Nov13

Sharing a Christmas card that I made today using KLM Digital Design –  Snowball Gnome from the new November 2022 release. This image comes with 2 other sentiments as well, “You’re the Jolly to my Holly” and “Baby It’s Cold Outside”.

To make my card this week, I started with a 6″ x 6″ card base using AC Cardstock – White. Using double-sided tape, I attached the patterned cardstock of the same size from Signature Collection by Sara Davies – Winter Wonderland.  The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. Using my Cuttlebug and Gina Marie Designs – Big and Little Pierced Chain Oval Layered Dies, I die cut the image and then coloured it in. With a Gelly Roll Sakura #10 Pen, I added snow into the sky. Stickles – Diamond was added to the snow on the ground and snowballs to add some sparkle. Stickles – Crystal was added around the oval and the coloured image was set aside to dry. I fussy cut around the sentiment and then ran the pieces through a Xyron Create a Sticker. The pieces were adhered to Recollections – Black cardstock and then fussy cut again. After everything was dry, U-Line double-sided tape was added to the back of the sentiment pieces and the image. These were all popped up onto the background paper. I added Recollections – Snowflake Specialty Polyester Glitter and a dab of Stickles – Crystal was added to the centre of the snowflakes to finish off the card.

Card Recipe:

Stamp and Sentiment:  Snowball Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Recollections – Black cardstock, Signature Collection by Sara Davies – Winter Wonderland (6″x6″)

Die Cuts: Gina Marie Designs – Big and Little Pierced Chain Oval Layered Dies

Stickles: Diamond and Crystal

Miscellaneous: U-Line double-sided tape, Recollections – Snowflake Specialty Polyester Glitter, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: W5, W4, W3, W1, W00

Clothing and Hat: R59, R37, R35

Boots and Glove: C9, C7, C5, C1

Sky: B02, B01, B00, B000

Snow and Snowballs: BV20, C00, Colorless Blender, Stickles Diamond

Outer Edge of the Oval: B99

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Owl Christmas!!

Dec18

Sharing a Christmas card I made today using Gerda Steiner Designs – Owl I Want For Christmas. THANK YOU SO MUCH Gerda Steiner for giving me the opportunity to win this super adorable stamp from playing your amazing Advent Calendar this year. This was one of the prizes for door #7. I couldn’t wait to create this card with it.

To make the card, I created the base using Hammermill – Premium Colour 100 lb. to the size of 5.5″ x 4.25″. I cut Creative Memories – Glacier Designer Paper to be the same size as the base and adhered it to the card using double-sided tape. Tim Holtz Distress Ink – Chipped Sapphire was used to ink around all of the edges of the card. The image was imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. Using my Cuttlebug and dies from Creative Expressions Craft Dies by Sue Wilson – Festive Collection – Holly Lattice Frame, I die cut the printed image and also golden background frame using Crafter’s Companion – Luxury Cardstock – Gold paper.

I coloured in the image with Copic markers and also added in the tree trunk. Using a Gelly Roll Sakura #10 Pen, I added snow to the sky, along the branches of the tree and on top of the pine cones. Cosmic Shimmer Fluffy Stuff combined with WOW! Embossing Glitter – White Puff Twinkle were added to the hat and pompom and then heated with a Marvy Uchida – Embossing Heat Tool to make it puff up. U-Line double-sided tape was applied to backs of the image and the gold die cut and both were popped up onto the background. Finally, I added some Stickles – Diamond over top of the snow I created on the tree trunk and pine cones.

For the sentiment, I used a Recollections 1″ circle punch to cut some green cardstock and then using my MISTI, I stamped the sentiment from Penguin Party – Lawn Fawn with VersaFine ink. I added Ranger Embossing Powder White – Extra Fine Detail and heat embossed it with my Marvy Uchida – Embossing Heat Tool. I inked around the edges of the circle with Tim Holtz Distress Ink – Pine Needles. This was popped up with U-Line double-sided tape and I added the embellishment from Recollections – Snowflake Specialty Polyester Glitter. To create the pine cone and pine needles, I used some scraps of brown and green paper and using my Cuttlebug, I die cut the shapes using Sizzix – Tim Holtz – Festive Greens 662425. I used glue to adhere the pieces together and then popped up the completed piece onto the card using U-Line double sided tape.

Card Recipe:

Stamp and sentiment: Owl I Want For Christmas – Gerda Steiner Designs

Stamp and sentiment: Penguin Party – Lawn Fawn

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Pine Needles, Tim Holtz Distress Ink – Chipped Sapphire

Die Cuts: Sizzix – Tim Holtz – Festive Greens 662425, Creative Expressions Craft Dies by Sue Wilson – Festive Collection – Holly Lattice Frame – CED3125, Recollections 1″ Circle Punch

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Creative Memories – Glacier Designer Paper Pack 12 x 12″, Crafter’s Companion – Luxury Cardstock – Gold

Embossing Powder \ Liquid: WOW! Embossing Glitter – White Puff Twinkle, Cosmic Shimmer Fluffy Stuff, Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Recollections – Snowflake Specialty Polyester Glitter

Image coloured with Copic Markers:

Owl: E47, E44, E43, YR24, Y38, Y35, Y32, Y23, C9

Hat: R59, R37, R35

Sweater: R59, R37, R35, BG09, BG05, BG02, BG1

Tree, Limb and Pine Cones: E49, E47, E42, E40, E29, E27, E25, E23, G29

Ornaments: R59, R37, R35, R22, BG09, BG05, BG02, BG1, BG000, Y38, Y35, Y32

Sky: B99, B97, B95, B93

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.