Tag Archive | Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards)

Carolers – Joy To The World!!

Nov8

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Carolers – TT011 for the main image and Joy to the World – GLL012, for the sentiment. Seeing these carolers reminds me of my younger days when we would go visiting and sing Christmas carols at our cousins and our parent’s friends’ houses.

To make my card this week, I began with a card base from Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards). Using my Cuttlebug and paper from Crafter’s Companion – Luxury Cardstock – Ice Blue Pack, I die cut the snowflake border with Lawn Fawn – Snowflake Border die cuts. Using the same paper, I cut a thin strip .25″ x 5.5″. With Lawn Fawn – Sparkle Cardstock in “Pixie Dust”, I cut a strip 1″ x 5.5″. Using double-sided tape, I attached the 1″ strip directly onto the base card. I ran the other strip through my Xyron Create a Sticker and attached it to the card next to the 1″ strip. I added liquid glue to the backs of each of the snowflakes for the snowflake border and adhered them over top of the larger strip. Tim Holtz Distress Inks – Tumbled Glass and a finger dauber were used to ink around all of the edges of the card.

With my Cuttlebug and dies from My Favourite Things – Die-namics – Elegant Rectangle Stax, I die cut a large rectangle out of Copic Marker X-Press It Blending Card cardstock. The image was stamped onto the die cut using my MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. I coloured in the image and then added the snow in the sky using a Gelly Roll Sakura #10 Pen. Cosmic Shimmer Fluffy Stuff was added to the trim of the girl’s jacket and then heat set with a Marvy Uchida – Embossing Heat Tool to puff it up. Crystal – Stickles was added on top of this and also along her dress hem. DecoArt Snow-Tex sprinkled with DecoArt Glamour Dust and a spatula were used to create the snow on the bottom of the image. Crystal – Stickles was added to add some extra sparkle and give some highlights. Wink of Stella – Clear was added on top of the music books. The sentiment was stamped onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Northern Pine ink. It was then die cut using my Cuttlebug and Poppystamps – Christmas Quotes dies. Tim Holtz Distress Ink – Rustic Wilderness was used to ink around the edges. I added U-Line double-sided tape to the back of the sentiment and finished image and popped them both up onto the card. Lastly, I added Ranger – Snowflake Glitter with liquid glue to finish it off.

Card Recipe:

Stamps: Carolers – TT011 (High Hopes Rubber Stamps)

Sentiment: Joy to the World – GLL012 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness, Memento – Northern Pine, Tim Holtz Distress Inks – Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards), Crafter’s Companion – Luxury Cardstock – Ice Blue Pack, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Die Cuts: My Favourite Things – Die-namics – Elegant Rectangle Stax – MFT-1268, Lawn Fawn – Snowflake Border (#LF2431), Poppystamps – Christmas Quotes

Snow: DecoArt Snow-Tex, DecoArt Glamour Dust, Crystal – Stickles

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cosmic Shimmer Fluffy Stuff, Crystal – Stickles, DecoArt Glamour Dust, Cuttlebug, Marvy Uchida – Embossing Heat Tool, Xyron Create a Sticker, Ranger – Snowflake Glitter

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R24, R21 (Eyes: Gelly Roll Sakura #10 Pen, Sakura Glaze – Black)

Hair: E15, Y38, Y21, YR23, E47, E44, E43, E42

Boy Mitts, Scarf and EarMuffs: BG09, BG05, BG02, BG01

Boy Jacket: R59, R37, R35

Boy Jeans: B26, B23, B21

Boy Boots: E27, E25, E23, E21,

Girl’s Coat and Boots: BG72, BG57, BG32, BG11, Cosmic Shimmer Fluffy Stuff, Crystal – Stickles

Girl Dress and Leggings: YG67, YG63, YG61, G19, G16, G14, Crystal – Stickles, Gelly Roll Sakura #10 Pen

Girl EarMuffs and Mittens: YG67, YG63, YG61

Song Books: YR23, Y15, Y11, Y00, Wink of Stella – Clear

Bird: R46, R14, R08

Cat: T9, T7, T5, T4, R01

Dog: E37, E35, E33, R24

Sky: B99, B97, B95, B93

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Moo-rry Christmas!!!

Oct6

It’s Wednesday, and this week, I made a Christmas card using Chillin’ Charlie – TT049 by High Hopes Rubber Stamps for the main image and Moo-rry Christmas – FDG002 (High Hopes Rubber Stamps) for the sentiment. It’s beginning to look a lot like Christmas release is being celebrated this month at High Hopes Rubber Stamps.

To make my card this week, I began with a card base from Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards). I cut Crafter’s Companion – Luxury Cardstock – Navy Blue paper to the size of 3-5/8″ x 4-5/8″. The 3.5″ x 4.5″ background was cut from Heartfelt Creations – Festive Winterscapes Collection. I inked around the edges of the base card and background image with Tim Holtz Distress Ink – Faded Jeans. The sentiment was added to the base card using Versa Fine – Onyx Black ink and my MISTI. The ink was embossed using my Marvy Uchida – Embossing Heat Tool and Ranger – Clear Super Fine Detail embossing powder. I applied the 2 cut pieces together using double-sided tape and then popped them onto the base using 3M  double-sided tape. I had some branches pre-punch from earlier from various green cardstock using my Martha Stuart – Branch punch. I applied liquid glue to the backs of each of the branches and applied them to the popped up background.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers and then I fussy cut around it. For the hat trim and pop-pom, I used Ranger – Emboss It Pen Clear and sprinkled on some WOW! Sparkling Snow Embossing Glitter. I heated this with my Marvy Uchida – Embossing Heat Tool and then repeated the process to give it more texture. The image was popped up onto the background using 3M double-sided tape and a few small Ranger Snowflakes were added. Lastly, I added some Stickles – Diamond to the snowflakes on the background and in the centres of the smaller snowflakes to complete my card.

Card Recipe:

Stamp: Chillin’ Charlie – TT049 (High Hopes Rubber Stamps)

Sentiment: Moo-rry Christmas – FDG002 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Faded Jeans, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards), Crafter’s Companion – Luxury Cardstock – Navy Blue, Heartfelt Creations – Festive Winterscapes Collection

Die Cut: Martha Stuart – Branch punch

Embossing Powder: WOW! Sparkling Snow Embossing Glitter

Tools: MISTI – Most Incredible Stamping Tool, 3M – 2 sided tape, Marvy Uchida – Embossing Heat Tool, Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen, Ranger – Emboss It Pen Clear, Ranger Snowflake Glitter

Image coloured with Copic Markers:

Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen

Cow: C8, C6, C4, C3, C1, C00, B60, R30, R20, R00, R000, E95, E93, E53, E51, E50

Santa Hat: R59, R37, R35, WOW! Sparkling Snow Embossing Glitter, Cosmic Shimmer Fluffy Stuff

Collar, Holly and Bell: G43, G29, G28, H 14, YG23, YG03, E15, YR24, Y35, Y08

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Surfing Gabriel!!

Apr28

It’s Wednesday, and this week, I made a masculine card using Surfing Gabriel – TT516 by High Hopes Rubber Stamps for the main image and No Waves – FR011 (High Hopes Rubber Stamps) for the sentiment. Gabriel is enjoying the waves and the bright skies. I can’t wait for the weather to warm up here so that I can start swimming again too!

To make my card this week, I die cut a square from Copic Marker X-Press It Blending Card using My Creative Time -Stitched Squares Inside and Out. A larger square was cut using Waffle Flower – Nesting Square dies and spare blue cardstock. The image and sentiment were both stamped using my MISTI and Memento – Tuxedo Black ink. I coloured in the image with Copic markers. Then, I created a mask and put it over top of the coloured image and added in my clouds using various Tim Holtz inks listed below and Avery Elle – Pierced Clouds Die (Used to create stencils). To create the spray on the waves, I mixed a little bit of FolkArt – Extreme Glitter Acrylic Paint and Delta Ceramcoat – White paint and applied it to the coloured image using a 1/4″ H.J. Domed Dry Stipple brush. For a little extra sparkle, I added some DecoArt Glamour Dust while the paint was still wet.

Brother Scan and Cut was used to die-cut around the sentiment. Edges were inked with Tim Holtz Distress Ink – Blueprint Sketch. A second circle was die cut using Lifestyle Crafts Cutting Dies – Nesting Circles out of aqua cardstock and inked with Tim Holtz Distress Inks – Peacock Feathers.

To assemble the card, I used Recollections – Winter 4.25″ x 5.5 for the base. Tim Holtz Distress Ink – Salty Ocean was used to ink around the edges of the card. The coloured image was glued to the larger square and the sentiment was glued to the larger circle. 3M VHB – 2 sided tape was attached to the backs of the larger circle and square and attached to the base card. To finish it off, YNS Gumdrops were added.

Card Recipe:

Stamp: Surfing Gabriel – TT516 (High Hopes Rubber Stamps)

Sentiment: No Waves – FR011 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Ranger Distress Ink – Broken China, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Inks – Peacock Feathers

Paper: Copic Marker X-Press It Blending Card, Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards), Aqua cardstock, Blue cardstock

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Waffle Flower – Nesting Square dies, Lifestyle Crafts Cutting Dies – Nesting Circles

Stencil: Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie (Used to create stencils)

Tools: MISTI – Most Incredible Stamping Tool, Picket Fence – Blending Brush, 1/4″ H.J. Domed Dry Stipple, YNS Gumdrops, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20 (Eyes: Sakura Glaze – Black, Gelly Roll Sakura #8 Pen)

Hair: E47, E44, E43, E40

Swim Trunks: B79, B69, B66, YG03, YG01

Surf Board: Y38, Y17, Y15, YR18, YR16, BG57, BG32, BG11

Water: BG70, B93, B91, B52, B41, B06, B02, B01, B000

Water Droplets: B06, B02, B00

Sentiment: B000

Foamy Water: FolkArt – Extreme Glitter Acrylic Paint, Delta Ceramcoat – White, DecoArt Glamour Dust

Check out some other fun new stamps from the vault for Boys and Men here:
THE VAULT IS OPEN! MEN & BOYS RELEASE Archives – High Hopes Rubber Stamps (highhopesstamps.com)

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Christmas Bells!!

Dec3

Today, I’m sharing Holiday Bells from KLM Digital Designs November Release. The image comes with 3 different sentiments, “Merry Christmas”, which I’ve used on my card and also, “Season’s Greetings” and “Happy Holidays”.

To make the card, I printed out the image onto Copic Marker X-Press It Blending Card using my HP Printer. I coloured in the image with Copic markers and then I fussy cut around the image. A black marker was used to go around all of the edges. The sentiment was printed out onto Recollections white paper and then fussy cut as well. Then I ran both the image and the sentiment through my Xyron Creative Station to make it easier to lay them down completely flat on the card base. For the card base I used Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards).

Card Recipe:

Stamp and Sentiment: Holiday Bells (KLM Digital Designs)

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards)

Tools: Xyron Creative Station

Image coloured with Copic Markers:

Bells: E15, YR24, Y35, Y28, Y26, Y23, Y21, Y08, W5. W3, W1

Leaves and Berries: R59, R39, R37, R35, G46, G43, G29, YG03, YG01, C3, Gelly Roll Sakura #8 Pen

Ribbon: R29, R27, R24, C3, C2

Hope you like it and have a great week!

Check out KLM Designs for some great savings this month.

Offer good until 12/07/20
25% OFF ALL PHOTOPOLYMER STAMPS
USE COUPON CODE: BLACKFRIDAY

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Sending You Tidings

Nov22

Today, I’m featuring a Christmas card by Dreamerland Crafts using their stamp set called Sending You Tidings – D19072. Growing up in the North, we used to get a lot of snow. I always love looking out the window and seeing the snow fall and how beautiful it looks on the houses and trees. Driving in it, not so much, but everything else about winter, I love. LOL!

To make this card, I cut some Copic Marker X-Press It Blending Card to the size of 4.75″ x 3.5″ using my Cuttlebug and My Creative Time – Rectangle Frame Layers Dies. Then using my MISTI and Memento – Tuxedo Black, I stamped the image first onto the paper and then again on to Post-It Note to create a mask. I fussy cut around the mask and placed it to the side to use a little later. I then proceeded to colour in my image with Copic markers.

Once the colouring of the image was complete, I was ready to create the sky. To accomplish this, the mask that I had set aside earlier was placed over top of the coloured image. A mixture of Tim Holtz Distress Inks were then used: Black Soot, Chipped Sapphire, Blueprint Sketch and Dusty Concord inks. Once, the background was completed, I stamped the sentiment from the same stamp set using my MISTI and VersaMark ink. The sentiment was then embossed with Ranger Embossing Powder White – Extra Fine Detail and Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

I was now ready to add the final finishing touches. To do this, I added in the snowflakes and stars using Gelly Roll Sakura #10, #8 and #5 Pens. Stickles – Cool Mint was added to the little lady’s hat, pom-pom and coat cuffs. Gina K Designs – Glitz Glitter Gel was applied with a spatula along the bottom of the card to create some sparkling snow and also to the top of the chimney with a Q-Tip. I also coloured in the little snowflake in the sky with Gelly Roll Sakura #10 pen and then Gelly Roll Stardust – Clear to make it sparkle. I set the card aside to let the glitter dry for a few hours.

For the card base I used Recollections – Winter 4.25″ x 5.5 and edged around all of the sides with Tim Holtz Distress Ink – Iced Spruce. I die cut Hot Buy Craft Smart – Holiday Glitz Glitter Paper to the size 3.75″ x 5″ using My Creative Time – Rectangle Frame Dies and Cuttlebug. This was adhered directly onto the base using 3M VHB – 2 sided tape. Once the glitter was completely dry, I layered the completed image on top of the second layer using 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment:  Sending You Tidings – D19072 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Ink – Chipped Sapphire, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Inks – Dusty Concord, Tim Holtz Distress Ink – Iced Spruce

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Recollections – Winter 4.25″ x 5.5″ (Assorted Box of Cards)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Die Cuts: My Creative Time – Rectangle Frame Die Layers – MCT-D274, My Creative Time – Rectangle Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Stickles – Cool Mint, Gelly Roll Sakura #8 Pen, 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000, R22, R20, Eyes – Sakura Glaze – Black

Hair: E47, E44, E43

Hat, Jacket, Mitts, Bear’s Scarf:  BG49, BG15, BG13, BG11, Stickles – Cool Mint

Leggings: C7, C5

Boots: E27, E25, E23, E21

Bear: E35, E34, E33, E31, E30, R22, R20, Eyes and Noses – Sakura Glaze – Black

Bow and Girl’s Scarf: R59, R39, R37, R35

Present: Y17, Y15, Y08, Y04

Chimney: E99, E97, E08, E07, E13, C4, C2

Snow: Gina K Designs – Glitz Glitter Gel, Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #5 Pen

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Christmas Joy!

Nov11

It’s Wednesday, and this week I’m sharing a Christmas card featuring Christmas Joy Snowy – S228 from (High Hopes Rubber Stamps). I love snowmen, winter and Christmas! Growing up in a northern community, we had a lot of snow. It was always so much fun and seeing the snow fall on Christmas day was always wonderful. Where we live now, we don’t get as much and it’s always disappointing when we don’t see snow on the ground for Christmas. It’s ok for the other days, but Christmas is extra special. Hopefully, Christmas Joy Snowy will bring some snow for us this year on our special day. LOL!

To create the card this week, I first used my Cuttlebug and Creative Expressions by Sue Wilson – Festive Collection Peeking Snowflake to create a die cut out of Copic Marker X-Press It Blending Card paper. I stamped the image and then coloured it in with Copic Markers. Once it was all coloured in, I added added some snowflakes to the sky using Gelly Roll Sakura #10 Pen. Clear – Wink of Stella was applied to all of the leaves. Stickles – Diamond was added to create the ground snow effect and I sprinkled some Martha Stewart Crafts – Crystal Fine Glitter on top of the Stickles while it was still wet. The coloured image was set aside to let it dry.

I die cut the larger oval using the same dies out of Crafts – Thick Glitter Craft Paper. I love this paper, but in order to prevent the glitter from getting everywhere, I first sprayed it with some hairspray.

The card was now ready to assemble. I used Recollections – Winter 4.25″ x 5.5″ card for my base. The large oval was adhered directly onto the base using 2-sided tape. The main image was added using 3M VHB – 2 sided tape and some snowflake embellishments were added to complete the card.

Card Recipe:

Stamp: Christmas Joy Snowy – S228 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Crafts – Thick Glitter Craft Paper 02-302270, Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards)

Die Cut: Creative Expressions by Sue Wilson – Festive Collection Peeking Snowflake

Stickles: Diamond

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Cuttlebug, Clear – Wink of Stella, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Snowman: B60, B0, B00, R22, R20, Colorless Blender

Jacket and Hat: B39, B32, B28, B24, B23, B21

Buttons: E15, YR24, Y35, Y08

Mitts and Scarf: BG57, BG53, BG49, BG13, BG11, BG10

Holly and Leaves: G99, YG67, YG17, YG01, G21, R39, R37, Gelly Roll Sakura #5 Pen

Nose: E08, YR18, YR16, YR12

Background: B60, B04, B02, B00, B000, BV20, Stickles – Diamond, Gelly Roll Sakura #10 Pen, Martha Stewart Crafts – Crystal Fine Glitter

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.