Tag Archive | Christmas Cards

Penguin Joy

Jan8

Sharing another Christmas card that I made using Whimsy Stamps – Penguin Joy – C1140. I love colouring penguins and couldn’t resist this adorable image when I saw it! LOL!

Hammermill – Premium Colour 100 lb. cardstock was used to create a 5.5″ x 4.25″ card base. I cut Recollections – Fireside paper to be the same size and adhered it to the base using double-sided tape. I applied Crafts – Sparkling Stickers – 02-3068629 – Red to a piece of Hammermill – Premium Colour 100 lb. cardstock. Using my Cuttlebug and MFT – Cross Stitch Rectangle dies, I die cut a large rectangle for the Sparkle paper combined piece and a smaller rectangle from Copic Marker X-Press It Blending Card cardstock. Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the smaller rectangle. This was coloured in with Copic markers. I applied the snow flakes in the sky using a UNIPosca PC-3M White marker.  Stickles – Diamond was applied to create the snow on the ground. U-Line double-sided tape was applied to both of the die cuts and they were popped up onto the centre of the card.

Card Recipe:

Stamp and Sentiment:  Penguin Joy – C1140 – Whimsy Stamps

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Fireside 6″ x 6″ (15.2 cm x 15.2 cm), Crafts – Sparkling Stickers – 02-3068629 – Red

Dies: MFT – Cross Stitch Rectangle

Miscellaneous: U-Line double-sided tape, Stickles – Diamond, UNIPosca PC-3M White marker, MISTI – Most Incredible Stamping Tool

Image coloured with Copic Markers:

Penguins: W9, W7, W5, W0, E41, E40, E15, YR14, Y17, Y11

Signs: YR31, YR30

Greens: YG63, YG07, G19, G17

Reds: R59, R37, R35, R21

Holly: BG99, YG67, YG63, YG61, G21

Sky: B02, B01, B00, B000

Snow: BV20, B000

Hope you like it and have a great week!

If Kisses Were Snowflakes

Nov13

Sharing a Christmas card that I made today using KLM Digital Design –  Snowball Gnome from the new November 2022 release. This image comes with 2 other sentiments as well, “You’re the Jolly to my Holly” and “Baby It’s Cold Outside”.

To make my card this week, I started with a 6″ x 6″ card base using AC Cardstock – White. Using double-sided tape, I attached the patterned cardstock of the same size from Signature Collection by Sara Davies – Winter Wonderland.  The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. Using my Cuttlebug and Gina Marie Designs – Big and Little Pierced Chain Oval Layered Dies, I die cut the image and then coloured it in. With a Gelly Roll Sakura #10 Pen, I added snow into the sky. Stickles – Diamond was added to the snow on the ground and snowballs to add some sparkle. Stickles – Crystal was added around the oval and the coloured image was set aside to dry. I fussy cut around the sentiment and then ran the pieces through a Xyron Create a Sticker. The pieces were adhered to Recollections – Black cardstock and then fussy cut again. After everything was dry, U-Line double-sided tape was added to the back of the sentiment pieces and the image. These were all popped up onto the background paper. I added Recollections – Snowflake Specialty Polyester Glitter and a dab of Stickles – Crystal was added to the centre of the snowflakes to finish off the card.

Card Recipe:

Stamp and Sentiment:  Snowball Gnome – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Recollections – Black cardstock, Signature Collection by Sara Davies – Winter Wonderland (6″x6″)

Die Cuts: Gina Marie Designs – Big and Little Pierced Chain Oval Layered Dies

Stickles: Diamond and Crystal

Miscellaneous: U-Line double-sided tape, Recollections – Snowflake Specialty Polyester Glitter, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: W5, W4, W3, W1, W00

Clothing and Hat: R59, R37, R35

Boots and Glove: C9, C7, C5, C1

Sky: B02, B01, B00, B000

Snow and Snowballs: BV20, C00, Colorless Blender, Stickles Diamond

Outer Edge of the Oval: B99

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Meowy Christmas!

Oct30

It’s the last day of the 2022 Cat Lovers Hop and today I’m sharing a Christmas card I made using Gerda Steiner Designs –  Deck The Halls – GSD438. I thought this image was adorable! Have fun hopping everyone!

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background to be the same size using Wild Rose Studio – Winter Bauble Paper and adhered it directly to the base using double-sided tape. Using Tim Holtz Distress Inks – Tumbled Glass and a finger dauber, I inked around all of the edges of the card. With my Cuttlebug and Hero Arts – Infinity Dies – Ornaments, I die cut a large ornament from Copic Marker X-Press It Blending Card cardstock and the ribbon and topper from a scrap piece of gold cardstock.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock and with Versafine – Majestic Blue, I stamped the sentiment onto the base card. I embossed the sentiment with Ranger – Clear Super Fine Detail embossing powder and then heat set it with a Marvy Uchida – Embossing Heat Tool. The image was coloured in with Copic markers and with a Gelly Roll Sakura #8 Pen designs were added to the ornaments and light bulbs. I tried to create the ornament as close to the paper as I could. Once this was completed, using liquid glue, I attached the top piece and the bow to the ornament. U-Line double-sided tape was added to the back of ornament die cut and it was popped up onto the background. With a Gelly Roll Sakura #8 Pen, I added in some string for the bauble.

Card Recipe:

Stamp and Sentiment:  Deck The Halls – GSD438 – Gerda Steiner Designs

Inks: Memento – Tuxedo Black, Versafine – Majestic Blue, Tim Holtz Distress Inks – Tumbled Glass

Die Cuts: Hero Arts – Infinity Dies – Ornaments (D1400)

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Wild Rose Studio – Winter Bauble Paper (6″ x 6)

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Miscellaneous: U-Line – 2-sided tape, Gelly Roll Sakura #8 Pen, MISTI (Most Incredible Stamping Tool), Marvy Uchida – Embossing Heat Tool,

Image coloured with Copic Markers:

Kitten: T9, T7, T5, T3, R30, R22

Large Ornament: BG09, BG05, BG02, BG01, Y11, Y00, YG00, Gelly Roll Sakura #8 Pen

Baubles: BV11, BV02, BV00, BV000

Lights and Wire Cord: R14, RV42, G07, YG07, YG01, B06, B04, B000

Hope you like it and have a great week!

Also entered into:

https://gsd-stamps.com/blogs/share-your-designs/play-along-in-november-22-challenge

 

Paw-sitively Good!

Oct29

It’s day 5 of the 2022 Cat Lovers Hop and today I’m sharing a Christmas card I made using Your Next Stamp –  Meowy Christmas – CYNS681. Having so much fun with this amazing hop and look forward to it every year.

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background to be the same size using My Favourite Things – Pawsome Prints paper and adhered it directly to the base using double-sided tape. Using my Cuttlebug, Creative Expressions – Festive Collection – Bold Snowflake Frame dies and Recollections – Blue Hues Shimmer Cardstock, I cut out the large snowflake and frame. Using some scrap dark blue paper, I die cut the large outline. I tore along the top of a small piece of Recollections – Christmas Inkjet Printable Glitter Paper and then die cut it with the larger cirlce die from the same die set. Using Tim Holtz Distress Ink – Faded Jeans and a finger dauber, the edges were inked all around the base card. With liquid glue, I attached the large snowflake to the background border. I then attached the snow piece that I had cut previously with liquid glue as well. Then, using a Gelly Roll Sakura #10 Pen, I coloured in some snow in the sky.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then I fussy cut around it. I added some U-Line double-sided tape to the image and popped it up into centre of the circle. The shadow was added using B52. The sentiments were both stamped onto the dark blue paper with VersaMark ink and then embossed with Ranger Embossing Powder White – Extra Fine Detail. I cut out the larger sentiment with my cutter and the smaller one using my Cuttlebug and Gina K Designs – Sentiment Strips. I attached U-line double sided tape the sentiments and coloured image frame and popped up everything onto the card base.

U-Line double-sided tape was applied to the backs of three Creative Impressions – Brads – Snowflake – Winter with a double layer. They were all popped up onto the card and then YNS Gumdrops – Firefly Magic Sparkly Gumdrops were applied to the centres to finish the card off.

Card Recipe:

Stamp and Sentiment:  Meowy Christmas – CYNS681 – Your Next Stamp

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Faded Jeans

Die Cuts: Creative Expressions – Festive Collection – Bold Snowflake Frame (CED3077), Gina K Designs – Sentiment Strips

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., My Favourite Things – Pawsome Prints (6″ x 6″), Recollections – Blue Hues Shimmer Cardstock (8.5″ x 11″), Dark Blue paper, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: U-Line – 2-sided tape, YNS Gumdrops – Firefly Magic Sparkly Gumdrops, MISTI (Most Incredible Stamping Tool), Creative Impressions – Brads – Snowflake – Winter, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Cat and Envelope: T9, T7, T5, T4, T3, T1, R21, C1, C0, Colorless Blender

Halo: Y08, Y04

Shadow: B52

Hope you like it and have a great week!

Also entered into https://blog.yournextstamp.com/challenge-191-midnight-comment-for-the-chance-to-win/

 

Think Snow!!!

Jul28

It’s Wednesday, and this week, I made a card using Snowman Stumble – TT014 by High Hopes Rubber Stamps for the main image and Think Snow 2 – FF047 (High Hopes Rubber Stamps) for the sentiment. I grew up skating at the outdoor rink directly across the street from my house. We couldn’t wait to get home from school and throw on our skates. The rinks were always full of children from the neighbourhood. We would either play rink games or hockey. I think there was a rink every couple of blocks. As soon as we’d finish eating, we were back on the ice again. Our parents were always yelling at us to come inside at the end of the day. How times have changed. LOL!

To make my card this week, I began with a card base made from Hammermill – Premium Colour 100 lb. cut and scored to be 5.5″ x 4.25″. My Cuttlebug and My Creative Time – Rectangle Frame Dies were used to die cut Hot Buy Craft Smart – Holiday Glitz Glitter Paper to be the same size as the base card. With a Picket Fence – Blending Brush and a mixture of Tim Holtz Distress Ink – Blueprint Sketch and Tim Holtz Distress Ink – Salty Ocean, I created the background sky. I applied this directly to the glitter background paper. Once this was done, I applied this directly to the base using double-sided tape. Next, Nellie’s Choice – Nature Scene Dies – NSD001 – Mountains were used to die cut the tree scenery using Momenta – Cardstock and using a small dauber I added in some darker touches of green using Tim Holtz Distress Inks – Peeled Paint. The pond was die cut using Whimsy Stamps – Wavy Nested Frame Dies Set and Copic Marker X-Press It Blending Card. I inked the image and sentiment using my MISTI and Memento – Tuxedo Black. Lastly, I die cut the sentiment using Joy Crafts – Labels and Tags and inked around the edges with my Picket Fence – Blending Brush and the ink that was still on it from doing the sky.

I coloured in the image with Copic markers and added in some highlights on the skate blades with Pental Sunburst Metalic Med Gel Pen. I inked the image a second time onto the Hot Buy Craft Smart – Holiday Glitz Glitter Paper for the snowman body and fussy cut around it. Once it was coloured in with Copics, I ran it through my Xyron Create a Sticker and attached it to the base stamped image.

The card was now ready to assemble. Part of the pond was cut off at the top before it was attached it to the sparkly background using glue and double-sided tape. Next, I added some 3M VHB – 2 sided tape to the back of the trees and applied it over top of where the sky ended and the pond met. To create the snow around the pond and in between the trees, pond and snow, I used Cosmic Shimmer Fluffy Stuff and added some DecoArt Glamour Dust while it was still wet. Marvy Uchida – Embossing Heat Tool was used to heat the liquid and make it puff up to look like fluffy snow. I added some Stickles – Diamond to the pompom. Using a Gelly Roll Sakura #10 Pen and Sharpie Water Based Paint – White – Extra Fine Point pen, I created the snow in the sky. Lastly, to finish off the card, I added 3M VHB – 2 sided tape to the sentiment and applied it to the card.

Card Recipe:

Stamp: Snowman Stumble – TT014 (High Hopes Rubber Stamps)

Sentiment: Think Snow 2 – FF047 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Momenta – Cardstock, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: My Creative Time – Rectangle Frame Dies, Nellie’s Choice – Nature Scene Dies – NSD001 – Mountains, Whimsy Stamps – Wavy Nested Frame Dies Set (WSD382), Joy Crafts – Labels and Tags

Stickles: Diamond

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Gelly Roll Sakura #10 Pen, Sharpie Water Based Paint – White – Extra Fine Point, DecoArt Glamour Dust, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool, Cuttlebug, Picket Fence – Blending Brush, Pental Sunburst Metalic Med Gel Pen, Xyron Create a Sticker

Image coloured with Copic Markers:

Snowman: B60, R30, R20, YR21, YR16, YR15, Colorless Blender

Hat: BG72, BG57, BG32, BG11, Gelly Roll Sakura #10 Pen

Mitts and Skates: C3, C2, C1, C00, BG09, BG05, BG02, BG01

Ice: B00, B000, B000

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

From All Of Us!!!

Jul21

It’s Wednesday, and this week, I made a card using Fresh Baked – TT004 by High Hopes Rubber Stamps for the main image and From All of Us – FF046 (High Hopes Rubber Stamps) for the sentiment. Looks like Santa and my husband have one thing in common!! They both love cookies!!! Especially, when they are fresh baked out of the oven. LOL!

To make my card this week, I began with a card base made from Hammermill – Premium Colour 100 lb. cut and scored to be 5.5″ x 5.5″. I chose Echo Park Co. – Twas the Night Before Christmas for my background paper and trimmed it to be the same size as the card. I applied double-sided tape to it and adhered it directly to the base card. With my Cuttlebug and My Creative Time -Stitched Squares Inside and Out, I die cut the next 3 layers using Hot Buy – Craft Smart – Christmas Embossed, Green Cardstock and Copic Marker X-Press It Blending Card. I applied double-sided tape to the light green layer and attached it directly to the background layer. Then, I added some 3M VHB – 2 sided tape to the back of the Green Cardstock and applied that on top of the light green layer. I die cut the circle for the sentiment using some spare Hammermill – Premium Colour 100 lb. cardstock using My Creative Time – Bunch of Fun Circle Dies and the ornament pieces using My Creative Time – Fun Stitched Ornaments & More and some scrap Red Cardstock and Hammermill Cardstock. Using a
Pïlot Silver Marker – Medium Point pen, the top piece was coloured in.

The image and sentiment were then applied using my MISTI and Memento – Tuxedo Black ink. I coloured in the image with copic markers. Then I added Stickles – Diamond to the lady’s cuffs, dress trim, hat and collar and Stickles – Icicle to the man’s hat, pompom, collar, cuffs and trim on his coat. I also added this to the boy’s pompoms. Using the Pïlot Silver Marker – Medium Point pen, I traced around the outside of the circle for the sentiment.

Once everything on the image was dry, I applied double-sided tape to the back of it and applied the image to the top of the dark green layer. 3M VHB – 2 sided tape was added to the back of the sentiment and ornament ball. I assembled both pieces to the top of the card. Lastly, I added in some gold tinsel through the hole at the top of the ornament.

Card Recipe:

Stamp: Fresh Baked – TT004 (High Hopes Rubber Stamps)

Sentiment: From All of Us – FF046 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Echo Park Co. – Twas the Night Before Christmas – Volume 2 (12″ x 12″), Hot Buy – Craft Smart – Christmas Embossed (12″ x 12″), Hammermill – Premium Colour 100 lb.

Die Cuts: My Creative Time -Stitched Squares Inside and Out, My Creative Time – Fun Stitched Ornaments & More, My Creative Time – Bunch of Fun Circle Dies

Stickles: Diamond, Icicle

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Pïlot Silver Marker – Medium Point

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20

Hair: E15, Y38, Y21, YR23, E29, E25, E23, E21

Hats, Coat, Pants, Dress, Boots and Jewellery: R59, R37, R35, C1

Mitts, Belt and Boots: 100, W9, W7, W5

Apron, Boy’s Clothes and Hat: G99, G21, YG67, YG17

Cookies and Tray: C3, C2, C1, C0, E57, E53, E21

Flooring: E33, E29, E25, E23

Wall: G00, G000

Shadow Under Couple and Elf: C2, C1

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Good Times!!!

Jul14

It’s Wednesday, and this week, I made a card using Joy Ride – TT002 by High Hopes Rubber Stamps for the main image and Good Times – GLL006 (High Hopes Rubber Stamps) for the sentiment. Christmas is always a wonderful time to gather with family and friends. Thinking of snow right now is also a way to cool down with all of this summer heat too! LOL!


 

To make my card this week, I began with a card base made from AC White Cardstock cut and scored to be 6″ x 6″. I chose Echo Park Paper Co. – My Favorite Winter (6″ x 6″) for my background paper and trimmed just a little off of the sides. Then, I used Tim Holtz Distress Ink – Blueprint Sketch and inked around all of the edges. I added some glue to the back of the paper and applied it to the base card. Using My Creative Time -Stitched Squares Inside and Out, I die cut a larger square from Recollections – Burgundy cardstock and a smaller square from Copic Marker X-Press It Blending Card. I inked around the edges of the larger square with Tim Holtz Distress Ink – Aged Mahagony and applied 3M VHB – 2 sided tape to the back of it and applied to the background. I die cut the sentiment label with My Creative Time – Stitched Rectangular Frames Dies and More. The image and sentiment were then applied using my MISTI and Memento – Tuxedo Black ink. I applied Stickles – Unicorn around the edges of the label and set it aside to dry.

I coloured in the image with copic markers. Then I added Stickles – Eucalyptus to the lady’s cuff and collar and Stickles – Crystal to her hat and pompom. For the man, I applied Nuvo Glitter Accents – Fresh Snowfall to his hat and pompom. Lastly, I added some Brutus Monroe – Snow Paste using a spatula to the bottom outer edge of the image to represent a snow bank on the side of the road. Using a Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Glitter Glue Pen and DecoArt Glamour Dust, I created the snowy background. Gelly Roll Sparkle Pen was used to colour in the Holly on the wreath.

Once everything on the image was dry, I applied some glue to the back of it and applied it directly on top of the larger square. I applied some glue and some 3M VHB – 2 sided tape to the sentiment and applied that on an angle at the top of the card. I only put the tape in a few spots so that it would be the same height as the image. To finish off the card, I added some CC Designs – Dragon Dreams Enamel Dots on to the sentiment and some sequence.

Card Recipe:

Stamp: Joy Ride – TT002 (High Hopes Rubber Stamps)

Sentiment: Good Times – GLL006 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Aged Mahagony, Tim Holtz Distress Ink – Blueprint Sketch

Paper: Copic Marker X-Press It Blending Card, AC White Cardstock, Echo Park Paper Co. – My Favorite Winter (6″ x 6″), Recollections – Burgundy

Die Cuts: My Creative Time -Stitched Squares Inside and Out, My Creative Time – Stitched Rectangular Frames Dies and More

Stickles: Eucalyptus, Crystal, Unicorn, Nuvo Glitter Accents – Fresh Snowfall

Paste: Brutus Monroe – Snow Paste

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Gelly Roll Sparkle Pen, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Glitter Glue Pen, CC Designs – Dragon Dreams Enamel Dots.

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20

Hair: E15, Y38, Y21, YR23, E29, E25, E23, E21

Hats, Jacket, Wreath: R59, R37, R35

Mitts, Jacket and Tie: G28, G24, G21

Pants: W9, W7, W5

Boots and Gloves: E27, E25, E23, E21

Bike and Wheels: C9, C7, C5, C4, C3, C2, C1, Y17, Y11, Y08, R59, R37, R35

Holly: G14, G07, YG03

Puffs of Smoke: B60, C1, C00

Sky: B99, B97, B39, B37, B29, B28, B26

Road: T7, T5, T3

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Happy Xmas Couple!!!

Jul7

It’s Wednesday, and this week, I made a card using Happy Together – TT007 by High Hopes Rubber Stamps for the main image and Holiday All Year – H200 (High Hopes Rubber Stamps) for the sentiment. This month High Hopes Rubber Stamps is celebrating Christmas in July! Have you started your Christmas cards yet for this year?

To make my card this week, I began with a card base made from AC White Cardstock cut and scored to be 6″ x 6″. I inked around the edges of American Crafts – “Holiday” paper cut to the same size with Sharpie – Gold Medium Point – Water Based Paint. Then I applied it directly to the base card with double-sided tape. The larger oval was die cut using my Cuttlebug, Forever In Time – Texture Rouge paper and Gina Marie Designs – Big and Little Pierced Chain Oval Layered Dies. Using VersaMark ink, I inked around all of the edges of the oval and then applied Stampendous Stamp-n Stuff – Gold Tinsel and heat embossed it with Marvy Uchida – Embossing Heat Tool. This was then applied directly to the base card using Forever In Time – Double-sided foam tape. I die cut the Copic Marker X-Press It Blending Card paper using oval dies from the same set and Whimsy Stamps – Bookmark and Tags Die Set was used to die cut Lawn Fawn – Watercolor Wishes Rainbow paper.

The image was stamped using my MISTI and Memento – Tuxedo Black ink onto the smaller oval. I coloured in the image with Copic markers. The sentiment is actually 2 lines, but I wanted it to fit inside the gift die, so I used Scotch tape to mask off the words I didn’t want to show each time. I used my MISTI to do the stamping and Versa Fine – Onyx Black and Ranger – Clear Super Fine Detail embossing powder to emboss it. I used my Marvy Uchida – Embossing Heat Tool to emboss the powder. I cleaned off the stamp and then repositioned it again, repeating the previous steps. I did this 4 times. To finish off the sentiment give box, I applied some VersaMark ink to the bow and around all of the edges of the die cut. Next, I added Stampendous Stamp-n Stuff – Gold Tinsel embossing powder and heat embossed everything using my heating tool.

To assemble the card, I added 3M VHB – 2 sided tape to the back of the coloured image and Forever In Time – Double-sided foam tape to the back of the sentiment and applied them both to the card. To finish everything off and give it a little bit of sparkle, I added some dots on the holly using Stickles – Xmas Red.

Card Recipe:

Stamp: Happy Together – TT007 (High Hopes Rubber Stamps)

Sentiment: Holiday All Year – H200 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, VersaMark, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card,  Forever In Time – Texture Rouge, American Crafts – “Holiday” – 6″ x 6″ paper pad, Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″

Die Cuts: Gina Marie Designs – Big and Little Pierced Chain Oval Layered Dies, Whimsy Stamps – Bookmark and Tags Die Set

Embossing Powder: Stampendous Stamp-n Stuff – Gold Tinsel, Ranger – Clear Super Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Sharpie – Gold Medium Point – Water Based Paint, Forever In Time – Double-sided foam tape, Stickles – Xmas Red

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20

Hair: E47, E44, E43, E40, E15, Y38, Y21, YR23, E29, E25, E23, E21

Dress and Ribbon: R39, R37, R35, C1

Vest, Holly, Flower Wrap: G46, G28, G24

Pants: C9, C7, C5

Shoes: 100, C7, C5, C3

Flowers: R39, R37, R35, R24, C1

Background: G02, G00, G000, G0000

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Penguins Visit Santa

Dec23

Sharing a card that I made using Penguins Visit (Di’s Digi Stamps). I just thought this stamp was so adorable and loved the little scene.

Stamp: Penguins Visit (Di’s Digi Stamps)

Sentiment: New Christmas Seals (Kraftin Kimmie Stamps)

Inks: Memento – Tuxedo Black, Versamark, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Hot Buy Craft Smart – Cute and Cozy Christmas 12″ x 12″, Recollections – Christmas Plaids – 6″ x 6″ (15.2 cm x 15.2 cm), Lawn Fawn – Snowy Day Remix – 6″ x 6″ (15.2 cm x 15.2 cm)Lawn Fawn – Snowy Day Remix – 6″ x 6″ (15.2 cm x 15.2 cm)

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Sizzix Tim Holtz Alterations Snowflakes, Amy Design – Dies – Keep It Cool – Cool Square Frame

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Image Coloured with Copic Markers

Skin:  E21, E11, E04, E00, E000

Beard, Trim, Pompoms: W1, W0, Colorless Blender

Santa’s Coat, Pants and Hat: R39, R29, R27, R24, Stickles – Diamond

Santa’s Bag and Mittens: G82, G29, G28

Boots: W9, W5, W2

Penguins: W9, W5, W2, YR14, Y17, Y15, E43, E41, Colorless Blender

Penguin Hat: BG49, BG45, BG32, Glitter Glue – Aqua

Presents and Bows: BG49, BG45, BG32, BG07, BG05, BG02, E15, Y19, Y17, Y15, R59, R37, R35

Igloo: BV20, C0, Colorless Blender, Wink of Stella – Clear

Sky: B39, B37, B34, Gelly Roll Sakura #10 Pen

Snow: Stickles – Diamond

Hope you like it!

Merry Christmas and Happy New Year Everyone!

Walking in a Winter Wonderland

Dec15

Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a card with you that I made using DCS19089 – Mix and Match Clear Stamp  (Dreamerland Crafts Clear Stamps) for the main image and sentiment and 2018 Christmas Trees & Houses – M18312 (Dreamerland Crafts Clear Stamps) for the trees in the background! I thought this little bear was just so adorable, so I thought I would make him pulling his little forest friend on a little walk through the forest!

I used the centre die cut from Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background – CED3049 to cut out the area I wanted to stamp my image on. I used Copic Marker X-Press It Blending Card, Memento – Tuxedo Black ink and my MISTI to get a nice clean image. The first step was to stamp the bear, sled and bunny. Next I used Inkadoo Stamping Mask Paper and stamped the 3 images again. Next, I added the masked images over top of the images that were previously stamped on the base image.

The second step was to stamp in the trees. I wanted to give the impression that some trees were further back, so I inked the tree stamp with Memento – Bamboo Leaves and stamped once and then immediately again using the same stamp. I performed this several times across the background. Once all of the trees were in place, I removed the masking and was ready to colour in my images.

Before adding snow to the sky, I stamped on the sentiment using VersaMark ink and Ranger Embossing Powder White – Extra Fine Detail. Then I added in the snow flakes using Gelly Roll Sakura #8 Pen.

The colours used for each character and the trees are listed below. The final step for the main image was to add in some sparkle on the trees and snow on the ground. For the glitter on the trees I used Quickie Glue and DecoArt Glamour Dust. For the snow below the trees, sled and bear, I used VersaMark ink and WOW! Embossing Glitter – White Puff Twinkle and touches of Stickles – Diamond.

Lastly, I die cut the background frame using Recollections – Christmas Inkjet Printable Glitter Paper and Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background. I added glue to the back of the die cut and mounted it on top of Crafts Sparkling Stickers – 02-3068629. Then I popped up the main image in the centre using 3M VHB – 2 sided tape.

Card Recipe:

Stamps: 2018 Christmas Trees & Houses – M18312 (Dreamerland Crafts Clear Stamps), DCS19089 – Mix and Match Clear Stamp (Dreamerland Crafts Clear Stamps)

Sentiments: DCS19089 – Mix and Match Clear Stamp (Dreamerland Crafts Clear Stamps)

Inks: Memento – Tuxedo Black, Memento – Bamboo Leaves, Memento – Rich Cocoa, VersaMark ink

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, WOW! Embossing Glitter – White Puff Twinkle

Paper: Copic Marker X-Press It Blending Card, Crafts Sparkling Stickers – 02-3068629, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Die Cuts: Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background – CED3049,

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Inkadoo Stamping Mask Paper, Stickles – Diamond

Image coloured with Copic Markers:

Bear: E57, E55, E53, E39, E37, E35, E34, R59, R37, R35, Sakura Glaze – Black (Nose and Eyes), Gelly Roll Sakura #5 Pen

Bunny: E57, E55, E53, E51, R20, R00, Sakura Glaze – Black (Eyes), Gelly Roll Sakura #5 Pen

Sleigh: R59, R37, R35, C3, C2, C1, E39, E37, E35

Trees: BG96, YG67, YG17, G21, G20, G00, G0000

Background Sky: B99, B97, B95, B93, B91

 

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Polar Bears Visit Santa

Dec8

Hi There! Sharing a Christmas card that I made using Polar Bears Visit (Di’s Digital Stamps). I just thought this image was so adorable and helps to celebrate the magic of Christmas!

To make this card I printed the image onto Copic Marker X-Press It Blending Cardstock using Grayscale. Using grayscale prevents the image from smudging when you go to colour it. I coloured in the image with various Copic markers which are listed below and then added in the snow on the bottom of the sleigh with DecoArt Snow-Tex. I love the texture of the snow with this product. After completing everything, I mounted the image onto the background papers using 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Polar Bears Visit (Di’s Digital Stamps)

Paper: Copic Marker X-Press It Blending Card, Heidi Swapp – HS01073 – 6 x 6 in, Green cardstock

Embellishment: Jot – Pop-up Stickers

Image coloured with Copic markers

Santa Suit: R39, R29, R27, R24

Mitts and Belt: W10, W8, W6

Sleigh: E35, Y38, Y35, Y21, R37, C5, C3, C1, E35, Y38, Y35, Y31

Bears: E17, E15, E13, E11

Present: G28, YG63, G21, Wink of Stella – Clear

Bow: E35, Y38, Y35, Y31

Sky: B01, B00, B000, Gelly Roll Sakura #8 Pen

Hat and Santa’s Coat Trim: Star Dust Stickles

Snow: DecoArt Snow-Tex

Hope you all have a magical Christmas this year!

Gingerbread Dreams!

Nov27

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Christmas. YAY!!!  This week, I used Gingerbread House (S159) (High Hopes Rubber Stamps) and Gingerbread Dreams (E061) (High Hopes Rubber Stamps) for the sentiment.

To make this card I stamped the Gingerbread House image onto Copic Marker X-Press It Blending Card using Memento – Tuxedo Black ink and my MISTI – Most Incredible Stamping Tool in order to give me a nice crisp image. I coloured in the image with a little guidance from Kit and Clowder’s Gingerbread house video created by Alyce. For the snow and candies, you can’t see it in this photo, but I used Spectrum Noir – Crystal Clear Sparkles. Once I finished colouring in the image, I fussy cut around it. I also stamped out the sentiment and fussy cut around that as well.

Next I used the Gingerbread Chain punch from Creative Memories to cut out my little gingerbread men and then used Gelly Roll Sakura #10 Pen to create the icing and a dab of Copic Marker #29 for the cheeks.

For the assembly of the card, I used 6″ x 6″ AC Autumn Cardstock for the base. I had a piece of Hot Buy Craft Smart – Holiday Glitz Glitter Paper from a previous project that I had worked on and layered this on top of the Gingerbread men paper from Doodlebug Design Inc. – Milk and Cookies.

Lastly I used 3M VHB – 2 sided tape to pop up all of the images and sentiment. I added in the little red embellishments to represent the little gingerbreads dreaming of their wonderful gingerbread house. LOL!

Card Recipe:

Stamp: Gingerbread House (S159) (High Hopes Rubber Stamps)

Sentiment: Gingerbread Dreams (E061) (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, AC Autumn Cardstock 12″ x 12″, Doodlebug Design Inc. – Milk and Cookies 6″ x 6″.

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Spectrum Noir – Sparkles – Crystal Clear, Gelly Roll Sakura #8 Pen, Creative Memories – Gingerbread Chain Border Maker Cartridge

Image coloured with Copic Markers:

Gingerbread House: E37, E35, E33, E31, Y21

Icing and Snow: BV31, BV1, BV000

Red: R29, R27, R24, R22

Green: G29, G07, G05

Yellow: E15, Y38, Y35, Y11

Orange: E15, YR18, YR15, YR12

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Happy Holidays!

Nov18

Welcome Back Dreamerland Craft Fans!

Dreamerland has just released some brand new stamps for their 2019 Christmas release and today, I’m sharing Happy Holidays (Dreamerland Crafts Clear Stamps)!  The image was coloured with copic markers.

Card Recipe:

Stamp and Sentiment: Happy Holidays (Dreamerland Crafts Clear Stamps)

Inks: Memento – Tuxedo Black, VersaMark ink, Tim Holtz Distress Ink – Evergreen Bough

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Paper: Copic Marker X-Press It Blending Card, Pebbles Winter Wonderland 6″ x 6″, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts:  Essentials by Tattered Lace Dies – Easel Slider

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Washi Tape

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E49, E47, E43

Hat and Coat: BG57, BG53, BG49

Scarf and Mitts: BG78, BG72, BG70

Pants: B26, B23, B21

Boots: E18, E17, E15, E13

Bear: E18, E17, E15, E13, E55, E53, E51, R22, R20

Sled: E15, Y38, Y35, Y15, R59, R37, R35, C3, C1, C0

Sky: B99, B97, B95, B93, B91, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #8 Pen

Snow: BV20, C1, Colorless Blender, Spectrum Noir – Sparkles – Crystal Clear, Stickles – Icicle

 

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Woodland Santa

Oct16

Welcome High Hopes Rubber Stamps Fans

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Christmas. YAY!!!  This week, I used Woodland Santa – R098 (High Hopes Rubber Stamps) for the main image and a sentiment from our new release called O Christmas Tree – GLL002 (High Hopes Rubber Stamps).

To create the scene, I cut out various sizes of trees and then used Tim Holtz Distress Inks to colour them. I also cut out various layers of snow from Recollections – Christmas Inkjet Printable Glitter Paper. Other pieces from the same paper, I just tore for a variation in the snow. I ran all of the little trees and snow through the Xyron Creative Station which made it much easier to put the scene together. Lastly, I popped up the image and sentiment with 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Woodland Santa – R098 (High Hopes Rubber Stamps)

Sentiment: O Christmas Tree – GLL002 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Gathered Twigs, Tim Holtz Distress Ink – Forest Moss, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Pine Needles and Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Recollections – Northern Lights – 6″ x 6″ (15.2 cm x 15.2 cm), Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, Crafter’s Companion – Luxury Cardstock – Green

Die Cuts: Lawn Cuts – Simple Stitched Hillside Borders – Lawn Fawn, Lawn Fawn – Stitched Hillside Borders, Die-namics – Exclusive Designs for “My Favourite Things” – Stitched Rec Scallop Frame – MFT-860, Your Next Die – Skating Rink Scene Die Set, Elizabeth Craft Designs – 1691 – Village Edges

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Gelly Roll Sakura #8 Pen

Image coloured with Copic Markers:

Skin: E000, E00, E04, E21, E11, R22, R20

Hair and Beard: W3, W2, W1, W0

Hat and Pants: R59, R37, R35, Stickles – Icicle

Shirt: YG17, R27, BG99, R17

Boots and Mitts: C10, C9, C7, C5

Wood for Axe and Tree Trunk: E29, E25, E21

Axe: C5, C3, C1

Tree: G99, YG67, YG17, G21

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Christmas Joy!

Oct9

Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Christmas. This week, I used Seasonal Wreath M018 (High Hopes Rubber Stamps) and Christmas Joy G115  (High Hopes Rubber Stamps).

 

Card Recipe:

Stamp: Seasonal Wreath M018  (High Hopes Rubber Stamps)

Sentiment: Christmas Joy G115 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, Crafter’s Companion Luxury Cardstock – Red – 8.5 x 11″

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug

Die Cut: Craftin Desert Diva’s – Flag Banner Dies (Retired)

Embellishments: Crafts Stickers – 02-3010502, Crafts – Ribbon

Image coloured with Copic Markers:

Wreath: G99, YG67, YG17, G21

Bow: E15, Y28, YR24, Y17, Y08

Ribbon: R59, R37, R35, R27, R24

Candy: BG45, BG10, R59, B26, B23, B21, Gelly Roll Sparkle Pen, Wink of Stella – Clear

Berries: Crafts – Self Adhesive Pearls 02-3006207

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Merry Christmas Eh!

Jul31

Welcome One Crazy Stamper Fans!

It’s Wednesday, and today is the last day of the month for One Crazy Stamper celebrating Christmas in July with High Hopes Rubber Stamps.  This week, I decided to combine Canadian Christmas Greeting (High Hopes Rubber Stamps) with the background papers and perfect Canadian sentiment from PhotoPlay, “Oh What Fun, EH?” LOL!

Card Recipe:

Stamp:  Canadian Christmas Greeting (High Hopes Rubber Stamps)

Sentiment and Background Papers: Photo Play – O Canada Christmas by Becky Fleck, Crafts Glitter Cardstock – 02-3068425

Paper: Copic Marker X-Press It Blending Card

Snowy Ground: WOW! White Puff Embossing Powder

Die Cuts: My Creative Time – More Stitched Circles

Inks: (Image) Memento – Tuxedo Black, (Edging) Tim Holtz Distress Ink – Salty Ocean, VersaMarker, VersaMark

Tools: Cuttlebug, MISTI – Most Incredible Stamping Tool, Marvy Heat Embossing Tool

Coloured with Copic Markers:

Moose: E29, E27, E25, E23, Sakura Glaze – Black

Wreath and Holly: G28, G14, G07

Beaver: E39, E37, E35, E33, Sakura Glaze – Black

Beard: C2, Colourless Blender

Belt: Black, C10, C9, C7, C3, C2

Baubles: B29, B28, B24, B21, Wink of Stella – Clear

Bow, Hat, Tambourine: C3, R39, R29, R27, R24

Candy Cane: C3, R39, R29, R27, R24, Wink of Stella – Clear

Bells: C3, C2, Wink of Stella – Clear

Sky: B04, B02, B00, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #8 Pen

Hat Trim: Stickles – Star Dust

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

 

Sitting Santa

Jul24

Welcome One Crazy Stamper Fans!

It’s Wednesday, and this month at One Crazy Stamper we are celebrating Christmas in July with High Hopes Rubber Stamps.  This week, I used Sitting Santa (High Hopes Rubber Stamps). Looks like Santa is in the North Pole getting all of your presents ready for you! Have you started your Christmas shopping yet for this year?

Card Recipe:

Stamp:  Sitting Santa (High Hopes Rubber Stamps)

Sentiment: Merry Christmas (High Hopes Rubber Stamps)

Paper: Copic Marker X-Press It Blending Card, Patterned paper

Ink: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Forest Moss

Embossing Powder: Stampendous Stamp-n Stuff – Green Tinsel, Recollections – Sparkle, Recollections – Snow

Die Cut: Lea’bilities Frame Circle Ribbons

Image and Die Cut Coloured in Copic Markers:

Skin: E000, E00, E21, E11, E04, R22, R20

Hat, Suit and Wreath: C3, R39, R29, R27, R24, Stickles – Star Dust

Shoes and Mitts: W10, W8, W6, Sakura Glaze – Black

Present: G43, G40, YG13, YG11

Bows: G28, YG63, G21, Wink of Stella – Clear

 

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

 

Merry Christmoose!

Jul17

Welcome One Crazy Stamper Fans!

It’s Wednesday, and this month at One Crazy Stamper we are celebrating Christmas in July with High Hopes Rubber Stamps.  This week, I used Mudzies Gift (High Hopes Rubber Stamps). Looks like Mudzie is already to start the celebration of Christmas early too!

Card Recipe:

Stamp:  Mudzies Gift  (High Hopes Rubber Stamps)

Paper: Copic Marker X-Press It Blending Card, American Crafts – Jolly – 6 x 6″ (15.2 x 15.2 cm), Green Cardstock, Crafts – Glitter Cardstock 02-3068425, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Pine Needles

Die Cuts: Your Next Stamp – Stitched Rectangle Die Set, Cheery Lynn Designs – B923 – Merry Christmoose

Tools: Cuttlebug, MISTI – Most Incredible Stamping Tool

Image coloured in Copic Markers:

Fur: E37, E35, E33, E31

Ears: R02, R01

Antlers: E25, E23, E21

Sweater: BG49, BG45, BG34

Bow: C1, R39, R29, R27, R24

Gift: BG05, BG01, B00, Wink of Stella – Clear

Wall: YG07, YG06, YG01, YG00, G28

Baseboards: C1, 0 Blending Marker

Floor: E09, E08, E07

Christmas Lights: C0, R29, R27, R24, BG49, BG45, BG34, Wink of Stella – Clear

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

 

Bearing Gifts!

Jul10

Welcome One Crazy Stamper Fans!

It’s Wednesday, and this month at One Crazy Stamper we are celebrating Christmas in July with High Hopes Rubber Stamps.  I used Teddy Gift (High Hopes Rubber Stamps) for my second card this month. He comes bearing gifts for you!!!

Card Recipe:

Stamp: Teddy Gift (High Hopes Rubber Stamps)

Die Cut: Creative Expressions by Sue Wilson – Festive Collection – Ornate Holly Framed Noel

Paper: Copic Marker X-Press It Blending Card, Crafts – Sparkling Stickers – 02-3068629, Crafts – Glitter Cardstock – 02-3068425, Aqua cardstock

Ribbon: Celebrate It – Holiday Ribbon Bow-Tique – 118164

Embellishments: Crafts – Rhinestones – Crafts – 02-3030386, Stickles – Star Dust, Nuvo Glitter Accents – Fresh Snowfall, Spectrum Noir  Sparkles – Crystal Clear

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug

Coloured with Copic Markers:

Bear: E29, E27, E25, E23, E55, E53, E51, Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Hat: R59, R39, R29, R27, R24

Holly and Leaves: YG99, YG93, R39

Vest: YG99, YG93, G14, YG09, R59, R39, R29, R27, R24

Gift: BG18, BG15, BG13, BG11

Ribbon: E15, YR38, YR24, YR23

 

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

 

Have Your Elf A Merry Little Christmas!

Jul3

Welcome One Crazy Stamper Fans!

It’s Wednesday, and this month at One Crazy Stamper we are celebrating Christmas in July with High Hopes Rubber Stamps.  I used Elvin Eldar (High Hopes Rubber Stamps) for my main image and Have Your Elf Day (High Hopes Rubber Stamps) for the sentiment on the inside of the card. Hope you have all been good so far this year as I can see that Elvin is busy making up his list!!!

Inside of the card:

Card Recipe:

Stamp: Elvin Eldar  (High Hopes Rubber Stamps)

Sentiment: Have Your Elf Day (High Hopes Rubber Stamps)

Paper: Copic Marker X-Press It Blending Card, Recollections Christmas Ink Jet Printable Glitter Paper, Crafts – Glitter Cardstock 02-3068425

Die Cut: Poppy Stamps – Pinpoint Snowflake Sidekick Frame and Stencil

Ink: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Ranger Distress Ink – Broken China

Miscellaneous: Crafts – Rhinestone Stickers – 02-3039148, Crafts – Rhinestone Stickers – 02-3048783, Darice – Finishing Accents Rhinestone Stickers – Wntr Wond FlkDarice – Finishing Accents Rhinestone Stickers – Wntr Wond Flk, Recollections Washi Tape, MISTI – Most Incredible Stamping Tool, Cuttlebug

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20, Gelly Roll Sakura #5 Pen

Hair: E29, E25, E21

Hat: R59 R39, R29, R27, R24,

Outfit: E15, Y28, Y17, YR24, G28, YG97, YG67, YG63, R59 R39, R29, R27, R24

Feather: BG49, BG45, B01, Gelly Roll Sakura #5 Pen

List: BG57, BG49, BG45, B01

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.