Tag Archive | Crafter’s Companion – Luxury Cardstock – Gold

Good Times!!


It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Bird Song – TDG016  for the main image and Good Times – FDG014 for the sentiment. These little birdie friends know how to whistle a tune. Unfortunately, I myself never mastered how to whistle! I’ve tried over the years, but just can’t seem to do it. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I used Scrapbook.com – Brights Smooth Cardstock for the background paper. This paper is great because it’s already cut to size which makes it so easy. I applied it to the base using double-sided tape. Using my Cuttlebug and Your Next Die – Stitched Frame Snowfall Hill die set, I die cut the centre piece from Copic Marker X-Press It Blending Card and the frame from Crafter’s Companion – Luxury Cardstock – Gold.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock and the sentiment onto Recollections – White cardstock. I coloured in the image with Copic markers and then added some Stickles – Diamond and Stickles – Waterfall to the parts of the snow to make it sparkly. Gelly Roll Sakura #10 Pen was used to create the snow in the sky. To make the eyes stand out a little more, I used Sakura Glaze – Black and then added a white dot using Gelly Roll Sakura #5 Pen. Once the stickles were dry, I turned the coloured image and frame over and taped them together on the back with some Scotch tape to keep the 2 pieces together. U-line double-sided tape was then applied and I turned it over again and popped it up onto the card. The sentiment was die cut using my Cuttlebug and Essentials by Tattered Lace Dies – Easel Slider. I inked around the edges with Sharpie – Gold Medium Point – Water Based Paint pen, added U-Line double-sided tape to the top half of the sentiment and added it on top of the image. Lastly I added some YNS Gumdrops – White Sugar and Sparkle to complete the card.

Card Recipe:

Stamp: Bird Song – TDG016 (High Hopes Rubber Stamps)

Sentiment: Good Times – FDG014 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Scrapbook.com – Brights Smooth Cardstock (4.25″ x 5.5″), Recollections – White, Crafter’s Companion – Luxury Cardstock – Gold

Die Cuts: Your Next Die – Stitched Frame Snowfall Hill, Essentials by Tattered Lace Dies – Easel Slider

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Stickles – Diamond, Stickles – Waterfall, Cuttlebug, YNS Gumdrops – White Sugar and Sparkle

Image coloured with Copic Markers:

Bird1 and Scarf: R59, R39, R37, R35, R29, R27, BG09, BG09, BG05, BG02, BG01, BG000 (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Bird2 and Scarf: Y17, Y15, Y13, Y11, Y02, Y00, BG72, BG57, BG49, BG32, BG11, Gelly Roll Sakura #5 Pen

Bird3 and Scarf: R56, R46, R37, R24, R22, C9, C7, C5, G16, G14, YG23, YG03

Beaks and Claws: YR18, YR14, YR12, Y19, Y08

Pine Needles: G29

Sky: B05, B04, B02, B01, Gelly Roll Sakura #10 Pen

Snow: C1, Stickles – Diamond, Stickles – Waterfall

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Christmas Caroling!!


Today, I’m sharing a card using Dreamerland Crafts stamps called Mix and Match Clear Stamps – DCS19090 and Mix and Match Clear Stamps – DCS19092. These little woodland creatures are enjoying the miracle of Christmas with some caroling.

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Using my Cuttlebug and My Creative Time – Rectangle Frame Dies, I die-cut Copic Marker X-Press It Blending Card and stamped the images using my MISTI and Memento – Tuxedo Black ink. I coloured in the images with Copic markers and added some decorations onto the tree using Nuvo Crystal Drops – Dandelion Yellow, Red Berry and Caribbean Ocean. To add some glitter to the snow, I applied Stickles – Diamond and for the snow in the sky, I used a Gelly Roll Sakura #10 Pen. The sentiment and music symbols were added using Versamark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat embossed with a Marvy Uchida – Embossing Heat Tool. Your Next Die – Stitched Frame Snowfall Hill was used to die cut Crafter’s Companion – Luxury Cardstock – Gold. Using glue, I adhered the background frame and coloured image to the base.

Card Recipe:

Stamp: Mix and Match Clear Stamps – DCS19090 – Dreamerland Crafts, Mix and Match Clear Stamps – DCS19092 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafter’s Companion – Luxury Cardstock – Gold

Die Cuts: My Creative Time – Rectangle Frame Dies, Your Next Die – Stitched Frame Snowfall Hill

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Nuvo Crystal Drops: Dandelion Yellow, Red Berry, Caribbean Ocean

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Stickles – Diamond

Image coloured with Copic Markers:

Angel Bear: E53, E51, E50, E37, E35, E34, E33, E31, E30, R59, R37, R35, R30, R02, R00

Rabbits: C7, C5, C3, C1, E37, E35, E34, E33, E31, R59, R37, R35, R14, R02, R00, BV23, BV20, Colorless Blender

Tree, Star and Base of Tree: G99, YG67, YG17, G21, Y17, Y15, Y13. Y04, E37, R59, R37, R35

Sky: B99, B97, B95

Ground: BV23, BV20, B00, BG000, C0

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Owl Christmas!!


Sharing a Christmas card I made today using Gerda Steiner DesignsOwl I Want For Christmas. THANK YOU SO MUCH Gerda Steiner for giving me the opportunity to win this super adorable stamp from playing your amazing Advent Calendar this year. This was one of the prizes for door #7. I couldn’t wait to create this card with it.

To make the card, I created the base using Hammermill – Premium Colour 100 lb. to the size of 5.5″ x 4.25″. I cut Creative Memories – Glacier Designer Paper to be the same size as the base and adhered it to the card using double-sided tape. Tim Holtz Distress Ink – Chipped Sapphire was used to ink around all of the edges of the card. The image was imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. Using my Cuttlebug and dies from Creative Expressions Craft Dies by Sue Wilson – Festive Collection – Holly Lattice Frame, I die cut the printed image and also golden background frame using Crafter’s Companion – Luxury Cardstock – Gold paper.

I coloured in the image with Copic markers and also added in the tree trunk. Using a Gelly Roll Sakura #10 Pen, I added snow to the sky, along the branches of the tree and on top of the pine cones. Cosmic Shimmer Fluffy Stuff combined with WOW! Embossing Glitter – White Puff Twinkle were added to the hat and pompom and then heated with a Marvy Uchida – Embossing Heat Tool to make it puff up. U-Line double-sided tape was applied to backs of the image and the gold die cut and both were popped up onto the background. Finally, I added some Stickles – Diamond over top of the snow I created on the tree trunk and pine cones.

For the sentiment, I used a Recollections 1″ circle punch to cut some green cardstock and then using my MISTI, I stamped the sentiment from Penguin Party – Lawn Fawn with VersaFine ink. I added Ranger Embossing Powder White – Extra Fine Detail and heat embossed it with my Marvy Uchida – Embossing Heat Tool. I inked around the edges of the circle with Tim Holtz Distress Ink – Pine Needles. This was popped up with U-Line double-sided tape and I added the embellishment from Recollections – Snowflake Specialty Polyester Glitter. To create the pine cone and pine needles, I used some scraps of brown and green paper and using my Cuttlebug, I die cut the shapes using Sizzix – Tim Holtz – Festive Greens 662425. I used glue to adhere the pieces together and then popped up the completed piece onto the card using U-Line double sided tape.

Card Recipe:

Stamp and sentiment: Owl I Want For Christmas – Gerda Steiner Designs

Stamp and sentiment: Penguin Party – Lawn Fawn

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Pine Needles, Tim Holtz Distress Ink – Chipped Sapphire

Die Cuts: Sizzix – Tim Holtz – Festive Greens 662425, Creative Expressions Craft Dies by Sue Wilson – Festive Collection – Holly Lattice Frame – CED3125, Recollections 1″ Circle Punch

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Creative Memories – Glacier Designer Paper Pack 12 x 12″, Crafter’s Companion – Luxury Cardstock – Gold

Embossing Powder \ Liquid: WOW! Embossing Glitter – White Puff Twinkle, Cosmic Shimmer Fluffy Stuff, Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Recollections – Snowflake Specialty Polyester Glitter

Image coloured with Copic Markers:

Owl: E47, E44, E43, YR24, Y38, Y35, Y32, Y23, C9

Hat: R59, R37, R35

Sweater: R59, R37, R35, BG09, BG05, BG02, BG1

Tree, Limb and Pine Cones: E49, E47, E42, E40, E29, E27, E25, E23, G29

Ornaments: R59, R37, R35, R22, BG09, BG05, BG02, BG1, BG000, Y38, Y35, Y32

Sky: B99, B97, B95, B93

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Dress Up The Christmas Tree!!


Today, I’m sharing a card using Dreamerland Crafts stamps called Mix and Match Clear Stamps – DCS19090.  These little woodland creatures are enjoying their new tree on a snowy evening. Do you have an outdoor Christmas tree?

To make this card I used a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. Using my Cuttlebug and My Creative Time – Rectangle Frame Dies, I die-cut Crafter’s Companion – Luxury Cardstock – Gold to the size of 5.5″ x 4.25″ and adhered it to the base using double-sided tape. Your Next Die – Stiched Frame Snowfall Hill was used to die cut Creative Memories – Glacier Designer Paper Pack for the snow frame and glued to the base background. With My Creative Time – Rectangle Frame Dies, I also die cut Copic Marker X-Press It Blending Card cardstock to the size of 4.5″ x 3.25″.

I stamped the image using my MISTI and Memento – Tuxedo Black ink onto the Copic Marker X-Press It Blending Card cardstock. I coloured in the image with Copic Markers. The sentiment was added using Versamark and Ranger Embossing Powder White – Extra Fine Detail. This was heated up with a Marvy Uchida – Embossing Heat Tool. The background snow was applied with a Gelly Roll Sakura #10 Pen. Crayola – Yellow Glitter Glue was applied to the glow around the star of the tree and Cosmic Shimmer Fluffy Stuff combined with WOW! Sparkling Snow Embossing Glitter was used to create the snow on the bottom. Stickles – Diamond was applied between the snow drifts to create a little more glitter. Nuvo Crystal Drops – Dandelion Yellow, Red Berry and Caribbean Ocean were applied to the tree for decorations. Once everything was dry, I applied U-Line double-sided tap to the back of the coloured image and applied it to the base to complete the card.

Card Recipe:

Stamp: Mix and Match Clear Stamps – DCS19090 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafter’s Companion – Luxury Cardstock – Gold, Creative Memories – Glacier Designer Paper Pack 12 x 12″

Die Cuts: My Creative Time – Rectangle Frame Dies, Your Next Die – Stiched Frame Snowfall Hill

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, WOW! Sparkling Snow Embossing Glitter

Nuvo Crystal Drops: Dandelion Yellow, Red Berry, Caribbean Ocean

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Crayola – Yellow Glitter Glue, Cosmic Shimmer Fluffy Stuff, Stickles – Diamond

Image coloured with Copic Markers:

Bear and Scarf: E53, E51, E50, E37, E35, E34, E33, E31, E30, R59, R37, R35, R02, R00

Rabbit and Scarf: R59, R37, R35, R02, R00, BV23, BV20, Colorless Blender

Tree, Star and Base of Tree: G99, YG67, YG17, G21, Y17, Y15, Y13. Y04

Sky: B99, B97, B95, B93

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

1st Communion!!


Sharing a card I made today using KLM Digital Designs – Communion Cross from the new August release. This image comes with 3 sentiments. I’ve used 1 on my card, but you also have the choice of  “First Communion” and “On Your First Holy Communion”. This would be great image and sentiment to give to either your child or a friend’s child celebrating this blessed sacrament.

To make the card, I first imported the image and sentiment into Microsoft Word and printed it out onto Copic Marker X-Press It Blending Card. I die cut the image and frame using my Cuttlebug and My Creative Time – Rectangle Frame Layers dies. I coloured in the the image with Copic markers and then placed Kraftin’ Kimmie – Starburst stencil over top and taped off the area that I wanted to use. Using Copic Y04, I coloured in the darker rays using the stencil as a guide. The tape was carefully removed from the top and sides of the stencil. The tape was placed back down at the top before removing the tape from the bottom of the stencil. After removing the stencil completely, the tape was placed back down on the 2 sides and bottom where the darker rays ended. Using the darker rays as a guide, I coloured in the lighter rays using Copic Y00 marker. All of the tape was removed at this point which left a nice thin white border around it.

Using the same dies again, I die-cut Crafter’s Companion – Luxury Cardstock – Gold to use for my background.

The card was now ready to assemble. Hammermill – Premium Colour 100 lb. was used to create the card base of 5.5″ x 4.25″. The gold background was added directly to the base using double-sided tape. 3M VHB – 2 sided tape was added to the back of the image to pop it up and it was placed directly over the gold background.

Card Recipe:

Stamp and sentiment: Communion Cross – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafter’s Companion – Luxury Cardstock – Gold

Die Cut: My Creative Time – Rectangle Frame Layers

Stencil: Kraftin’ Kimmie – Starburst

Miscellaneous:  3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Cross: B60, C1, C00, Colorless Blender

Grapes, Vines and Leaves: V09, V06, V04, V01, YG25, YG17, YG03, YG01

Starburst: Y04, Y00

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.