Archives

Dad’s 90th Birthday!

Apr27

Today I’m sharing a Birthday card that I made for my dad’s 90th Birthday last week using the image and sentiments from Art Impressions – Dance It Out – 5278. We had a nice party for him surrounded by family and close friends and he enjoyed every minute of it. 🙂 I created the fishes on the shirt because my dad has always loved fishing and I thought it would be fun to do.

To create the card, I began with the card base of 3.75″ x 9″ using Hammermill – Premium Colour 100 lb. cardstock. With a Cuttlebug, I die cut the sentiment using Spellbinders – Phrase Set 1 and the numbers with Lawn Fawn Lawn Cuts – Henry’s 123s and then adhered them directly to the card using liquid glue. With a stamping block and Versa Fine – Onyx Black, several sentiments were stamped using the Art Impressions – Dance It Out – 5278 set.

Once this was completed, it was time to create the background. To do this,  I placed down the stencil from Lawn Fawn – Confetti Stencils and applied multiple Tim Holtz Distress inks with some small blending brushes. I continued to do this until, I covered the entire card, being sure to not colour over any of the lettering.

With Memento – Tuxedo Black ink and my MISTI, I stamped the image onto Copic Marker X-Press It Blending Card and then coloured it in. Once this was completed, I then fussy cut around the entire image and popped it up onto the card using U-Line Double-Sided Foam Tape.

I applied some small balloons with some die cuts that I had cut out earlier using Your Next Stamp – Mini Balloon Trio Die Set and then added in the “th”, strings for the balloons and eyes for the fish with a Sakura Glaze – Black pen. The inside of the card also had a lot of fun sayings.

I made my dad this fun T-shirt too using my Cricut. He loved his card and shirt an I hope you do too!

Card Recipe:

Stamps and Sentiment: Art Impressions – Dance It Out – 5278,

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink: Carved Pumpkin, Cracked Pistachio, Mermaid Lagoon, Squeezed Lemonade, Wilted Violet, Festive Berries

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Dies: Spellbinders – Phrase Set 1 S4-563, Lawn Fawn Lawn Cuts – Henry’s 123s, Your Next Stamp – Mini Balloon Trio Die Set (YNSD241)

Stencil: Lawn Fawn – Confetti Stencils (6″ x 6″)

Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, U-Line Double-Sided Foam Tape, Sakura Glaze – Black pen

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R24, R20

Hair: W10, W8

Shirt: YR14, B37, B14, B12

Jeans: B99, B97, B95, B91

Shoes: W10, W8, W6, W4

Belt and Buckle: W10, W9, W7, YR23, Y15

Hope you like it and have a great week!

Dancing Penguins!

Dec25

Merry Christmas and A Very Happy, Healthy New Year to everyone! Hope you all have an amazing, safe and wonderful holiday with family and friends!

Sharing my last Christmas card of the year that I made using Spellbinders – Dancin’ Penguin – S3-482 and Dancin’ Christmas Sentiments – STP-216. For the background I used Polkadoodles – Theo Penguin – 10 Precoloured background scenes bundle Winter and Ice Theo Penguin.

Copic B000 was applied to the snow banks and pond and Stickles Diamond was added to give some sparkle to the snow and ice. Really love the way the skates swing back and forth below the penguins.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock.

Card Recipe:

Stamp Sentiment: Spellbinders – Dancin’ Christmas Sentiments – STP-216

Paper: Hammermill – Premium Cardstock 110 lb., Small scraps from my paper stash

Die Cuts: Spellbinders – Dancin’ Penguin – S3-482

Background Image: Polkadoodles – Theo Penguin – 10 Precoloured background scenes bundle Winter and Ice Theo Penguin

Embossing Powder: Simon Says Stamp – Ultra Fine Silver

Miscellaneous: My Favourite Things – Spin & Slide Discs, Marvy Uchida – Embossing Heat Tool

Hope you like it and have a great week!

Dancing Gingerbread !

Dec20

Today I’m sharing an interactive Christmas card that I made using Spellbinders – Dancin’ Gingerbread – S5-609 and Dancin’ Christmas Sentiments – STP-216. I could play with this card all day watching them swinging them back and forth! LOL!

Love these fun dies and just had to try them out. Using the die cuts, I cut all of the body pieces for the Gingerbread man and woman using the dies and a Cuttlebug. Tim Holtz Distress Ink – Rusty Hinge was then applied all around the edges with a finger dauber. All of the reds were die cut using Recollections – Red cardstock and then inked around the edges with Tim Holtz Distress Ink – Aged Mahogony. Just to give the pieces a little depth. For the cheeks, I added a little bit of pink chalk to make them rosier. All of the sparkle white pieces were die cut using Lawn Fawn – Sparkle Cardstock in “Pixie Dust”. I really love the glitter of this paper. The scarf pattern pieces were die cut out of Hammermill – Premium Cardstock.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Recollections – Red cardstock was cut to the same size as the base. Next, I cut 2 pieces of Recollections – Holiday Basics paper to the size of 4-1/8″ x 7/8″ and applied these to the top and bottom of the card. The centre piece was cut to the size of 4.25″ x 3.5″ and then inked around the edges with a finger dauber and Tim Holtz Distress Ink – Worn Lipstick. All of the paper pieces were adhered to the base card using liquid glue.

The Gingerbread were assembled along with some small scraps used to create the cheeks and eyes. White Gelly Roll Sakura #10 Pen was applied to each of the eyes to give them a little more character. The swinging mechanism was applied to the backs of the Gingerbread and My Favourite Things – Spin & Slide Discs were attached to the card using liquid glue and double-sided tape.

Lastly, I stamped the sentiment onto Hammermill – Premium Cardstock with VersaMark ink and applied Ranger – Rich Red Embossing Powder to it. A Marvy Uchida – Embossing Heat Tool was applied to the powder to heat emboss it.  This was cut down to 3-1/8″ x .75″ and both sides were notched with scissors and Tim Holtz Distress Ink -Worn Lipstick was applied around the edges with a finger dauber. U-Line Double-Sided Foam Tape was applied to the sentiment and it was popped up on the card to complete it.

Card Recipe:

Stamp Sentiment: Spellbinders – Dancin’ Christmas Sentiments – STP-216

Inks: Tim Holtz Distress Ink – Rusty Hinge, Tim Holtz Distress Ink – Aged Mahogony, Tim Holtz Distress Ink -Worn Lipstick, VersaMark

Paper: Hammermill – Premium Cardstock 110 lb., Recollections – Holiday Basics (12″ x 12″), Crafter’s Companion – Snowflake Swirls (12″ x 12″), Recollections – Red cardstock, Recollections Kraft Cardstock, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), scraps of pink and dark brown cardstock for cheeks, eyes and mouth

Die Cuts: Spellbinders – Dancin’ Gingerbread – S5-609

Embossing Powder: Ranger – Rich Red

Miscellaneous: U-Line Double-Sided Foam Tape, White Gelly Roll Sakura #10 Pen, My Favourite Things – Spin & Slide Discs, Marvy Uchida – Embossing Heat Tool

Hope you like it and have a great week!

Penguin and Reindeer Friend!

Dec19

Today I’m sharing a Christmas card that I made using Whimsy Stamps – Penguin and Reindeer Friend and Penny Black Creative Dies – Antique Frame.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers. Once I finished colouring the image, I applied Copic B000 all around it and then fussy cut the image out leaving a slim border.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Stampin’ Up – Snowflake Splendor Designer Series Paper was cut to the same size as the base card. Using a Cuttlebug and Penny Black Creative Dies – Antique Frame, I die cut the centre of the paper, keeping the original size as well. The same dies were also used to cut out a larger rectangle out of Hot Buy – Recollections – Jewel Tones paper. To create the snow, I first die cut the snow drifts with Lawn Fawn – Sparkle Cardstock in “Pixie Dust” paper and Spellbinders – Color Block Scenic Scape dies. Next, so that I could keep the same shape as the snowflake die cut, I once again ran both of the snow die cuts through the cutting machine using the Penny Black dies. All of the die cuts were inked around the edges with a finger dauber and Tim Holtz Distress Ink – Salty Ocean. Tim Holtz Distress Inks – Tumbled Glass was applied to the top of the snow banks to give them some contrast.

The whole card was now ready to assemble.

Liquid glue was applied to the larger snowflake border and then applied directly onto the base card. U-Line Double-Sided Foam Tape was applied to the completed image, small snow drift and each of the rectangle die cuts. The larger die cut rectangle was popped up onto the centre of the snowflake base. Liquid glue was applied to the larger snow drift and it was applied directly to the smaller snowflake die cut. Another layer of U-Line Double-Sided Foam Tape and some liquid glue were applied to the smaller snow drift then it was popped up onto the larger snow drift. The penguin and reindeer image was popped up behind the smaller snowdrift. I also applied some liquid glue to the foam tape so that it would adhere better to the sparkle cardstock. Lastly, I fussy cut a sentiment from Creative Expressions – Wordies Sentiment Sheets – Christmas Script and popped it up onto the top of the card.

Card Recipe:

Stamp: Whimsy Stamps – Penguin and Reindeer Friend

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Stampin’ Up – Snowflake Splendor Designer Series Paper, Hot Buy – Recollections – Jewel Tones, Creative Expressions – Wordies Sentiment Sheets – Christmas Script (CEW022)

Die Cuts: Penny Black Creative Dies – Antique Frame 51-937, Spellbinders – Color Block Scenic Scape (S3-418)

Miscellaneous: U-Line Double-Sided Foam Tape, White Gelly Roll Sakura #10 Pen, Sakura Glaze – Black, Pigma Micron 03 black marker

Image coloured with Copic Markers:

Penguin: W9, W7, W5, W3, W00, E15, YR14, Y17, Y11, RV00, E43, E42, E41, E40, Colorless Blender, (Eyes – Sakura Glaze – Black, White Gelly Roll Sakura #10 Pen), Pigma Micron 03 black marker

Scarf and Hat: BG09, BG05, BG02, BG01

Reindeer: E35, E33, E31, E18, E15, R02, R01, R00, C1, C00, (Eyes and Nose – Sakura Glaze – Black, White Gelly Roll Sakura #10 Pen), Pigma Micron 03 black marker

Bells and Collars: YR23, Y15, Y11, Y00, R46, R14, R08

Leash: G16, YG25, YG23

Hope you like it and have a great week!

Penguin Candy Cane !

Dec5

Today I’m sharing another Christmas card that I made using Whimsy Stamps – Penguin Candy Cane.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers. Once I finished colouring the image, I fussy cut around it.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Creative Expressions – Christmas Wishes paper was cut to be the same size as the base and was applied directly to the card using double-sided tape. A finger dauber was used to apply Tim Holtz Distress Inks – Candied Apple around all of the edges of the card. Using a Cuttlebug, I die cut the larger snowflake with Creative Expressions – Festive Collection – Lace Snowflake Frame and the smaller snowflakes with Poppy – Simple Snowflakes out of Lawn Fawn – Sparkle Cardstock in “Pixie Dust” paper. The holly and leaves were die cut using dies from Spellbinders – Dancin’ Figgy Pudding and some scraps of Recollections – Green cardstock and Crafter’s Companion Luxury Cardstock – Red. I used a Copic marker G99 to make the veins darker in the leaves and a White Gelly Roll Sakura #10 Pen to add a highlight on the berries and then used liquid glue to assemble them.

The whole card was now ready to assemble. U-Line Double-Sided Foam Tape was applied to the completed image and it was popped up onto the centre of the large snowflake. U-Line Double-Sided Foam Tape was then applied to the large snowflake and it was popped up onto the centre of the card. Liquid glue was applied to the holly and berries and smaller snowflakes which were adhered directly to the card base. Lastly, I applied U-Line Double-Sided Foam Tape to the sentiment from Hunkydory Essential Book of Christmas Sentiments 2023 and popped it up onto the corner of the card to finish it off.

Card Recipe:

Stamp: Whimsy Stamps – Penguin Candy Cane

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Inks – Candied Apple

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Creative Expressions – Christmas Wishes (8″ x 8″), Crafter’s Companion Luxury Cardstock – Red – 8.5 x 11″, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), Hunkydory Essential Book of Christmas Sentiments 2023, Recollections – Green cardstock

Die Cuts: Spellbinders – Dancin’ Figgy Pudding – S4-1315, Creative Expressions – Festive Collection – Lace Snowflake Frame (CED3123), Poppy – Simple Snowflakes (Style 1931)

Miscellaneous: U-Line Double-Sided Foam Tape, White Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Penguin: W9, W7, W5, W3, W00, E15, YR14, Y17, Y11, RV00, E43, E42, E41, E40, Colorless Blender

Hat: R46, R14, R08, C01, C0

Candy Cane: G16, YG25, YG23, R46, R14, R08, C1, C0

Hope you like it and have a great week!

Bride To Be Gnome!

Mar16

Today I’m sharing a Bride To Be card using KLM Digital Design – Bridal Gnome II from the new March 2024 release. This image also comes with 3 more sentiments, “Congratulations”, “on your engagement” and “on your marriage”. My niece is getting married this year and I thought this would be a wonderful card for her.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. Using a Cuttlebug and dies from Spellbinders – Grand Arch 3D card, I die cut the image and Recollections – Matte Gold Foil cardstock was used to die cut the Trellis. The clouds were die cut using Hammermill – Premium Cardstock 110 lb. and Lawn Fawn – Platform Pop-Up Cloud Inserts dies. I created a base card using Hammermill – Premium Cardstock 110 lb. cardstock and for the front flap, I used Cuttlebug Embossing Folder – Swiss dots stencil and ran it through my Cuttlebug. The image was coloured in with the Copics listed below. The sentiment and gold background were cut and layered together using U-Line Double-Sided Foam Tape.

The card was now ready to assemble. Using liquid glue, I applied the gold trellis and coloured image directly to the base. The sentiment was popped up and centred onto the top of the card. Lastly, using some glue dots, I added in 3 flowers from my stash to both sides at the bottom of the card to give it some extra colour.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Bridal Gnome II

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Matte Gold Foil cardstock

Dies: Spellbinders – Grand Arch 3D card (S6-138), Lawn Fawn – Platform Pop-Up Cloud Inserts

Embossing Folder: Cuttlebug – Swiss dots

Miscellaneous: U-Line Double-Sided Foam Tape, Flowers from my stash

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Hair: E08, YR18, YR16, YR12

Dress: C01, C00, Colorless Blender

Flowers, Hat and Leaves: Y17, Y08, Y02, R46, R14, R08, G16, G14, YG25, YG23, YG21

Sky: B04, B02, B01, B00, B60 on clouds

Grass: YG07, YG05, YG03, YG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Trick or Treat!

Oct30

It’s the last day of the 2022 Cat Lovers Hop and today I’m sharing a CAS Hallowe’en card I made using Lawn Fawn – Giant Trick or Treat for the sentiment and Spellbinders – Die D-Lites Kitty Cats Etched Dies. Happy Hallowe’en everyone and happy hopping!

 

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background to be the same size using DCWV Happy Haunts cardstock.and adhered it directly to the base using double-sided tape. Using Tim Holtz Distress Ink – Villainous Potion and a finger dauber, I inked around all of the edges of the card and put a few coats onto the bottom of the card. With my Cuttlebug, I die cut the sentiment 4 times and the kitty cats once. Using liquid glue, I adhered each of the sentiments together and then applied it to the card. I applied 2 layers of U-Line double-sided tape to the backs of the cats and a touch of glue and added them to the card.

Card Recipe:

Inks: Tim Holtz Distress Ink – Villainous Potion

Die Cuts: Lawn Fawn – Giant Trick or Treat, Spellbinders – Die D-Lites Kitty Cats Etched Dies.

Paper: Hammermill – Premium Colour 100 lb., DCWV Happy Haunts (6″ x 6″), Orange and Purple Cardstock

Hope you like it and have a great week!

 

Making Beautiful Music!!

Oct19

Today, I’m sharing a Christmas card that I made using Dreamerland Crafts stamps called Making Beautiful Music – D152002. This little angel is so sweet and is spreading Christmas cheer to everyone early this year.

To create this card I began by making a base of 5.5″ x 5.5″ using AC Cardstock – White. AC – Christmas Cardstock – Green was cut to be the same size as the base and then adhered to the card using double-sided tape. The frame was created using Couture Creations – Go Power and Emboss die-cutting machine, Creative Expressions by Sue Wilson – Festive Collection – Ornate Holly Framed Noel die and Lawn Fawn – Sparkle Cardstock in “Pixie Dust” paper. I applied liquid glue to the back of this piece and then adhered it to the card.

With my Cuttlebug, I die cut a 3.5″ x 3.5″ square using My Creative Time -Stitched Squares Inside and Out and Copic Marker X-Press It Blending Card cardstock. The main image was stamped using my MISTI and Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card. I cleaned off the angel and then stamped in place again using VersaMark ink for the snowflakes. Ranger Embossing Powder White – Extra Fine Detail was applied to the image and then heat embossed with a Marvy Uchida – Embossing Heat Tool. I coloured in the image and then added some sparkles onto the dress using a Gelly Roll Sakura #8 Pen. Sparkle was added to wings with Clear – Wink of Stella. To make the snowflakes a little brighter and to add some smaller snowflakes in the sky, I used a white Gelly Roll Sakura #10 Pen. I created a small mixture of FolkArt – Extreme Glitter Acrylic Paint, DecoArt Glamour Dust, Delta Ceramcoat – White onto an acrylic block and with a paint brush added in the snowy background along the bottom of the square. Using a small Stylus, I added in a few more sparkly snowflakes and sprinkled DecoArt Glamour Dust over them while they were still wet. This was then put aside to dry.

Using my Cuttlebug, I die cut 6 petals and 7 leaves out of scraps of paper using Spellbinders – Holiday Flower & Greenery dies. Liquid glue was used to attach the petals together and the I added U-Line double-sided tape and some liquid glue to the bottoms of them to attach them to the card. I trimmed the leaves and with a small amount of liquid glue applied to the tips of the leaves, I adhered them to the card under the flowers. PinkFresh Studio – Essentials Jewel Mix yellow jewels were glued to the centre of each flower. Using my Cuttlebug once again, I die cut 2 sentiments using Creative Expressions by Sue Wilson – Festive Collection – Ornate Holly Framed Noel die with some scrap gold paper. The oval was die cut using Creative Expressions – Frames and Tags – Charlotte dies and a scrap piece of AC – Christmas Cardstock – Burgundy. I glued the 2 sentiments on top of each other to give it some dimension and then attached the sentiment to the oval. U-Line double-sided tape was added to the back of the finished image and it was popped up onto the centre of the card. U-Line double-sided tape was applied to the oval and it was popped up onto the top of the card to finish it off.

Card Recipe:

Stamps: Making Beautiful Music – D152002 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, VersaMark

Paper: Copic Marker X-Press It Blending Card, AC – Christmas Cardstock, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Die Cuts: Creative Expressions – Frames and Tags – Charlotte (CED4319), Creative Expressions by Sue Wilson – Festive Collection – Ornate Holly Framed Noel – CED3073, Spellbinders – Holiday Flower & Greenery (S1-099), My Creative Time -Stitched Squares Inside and Out

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, PinkFresh Studio – Essentials Jewel Mix, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #8 Pen, Cuttlebug, Clear – Wink of Stella

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R22, R20

Hair: E47, E44, E43, E41

Dress: R59, R37, R35, R21, C1, Gelly Roll Sakura #10 Pen

Wing: BG0000, BG000, B0000, Y000, RV0000, Clear – Wink of Stella

Flower: R59, R37, R35, R21, Y35

Horn: E15, YR24, Y35, Y08

Background Sky: B02, B01, B00, B000

Snow: FolkArt – Extreme Glitter Acrylic Paint, DecoArt Glamour Dust, Delta Ceramcoat – White

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.