Tag Archive | Your Next Stamp – Mini Balloon Trio Die Set (YNSD241)

Birthday Celebration!!

May22

Today, I’m sharing a miniature birthday card that I made using Dreamerland Crafts stamps called Meow Meow 01 – D20013 for the main image and for the sentiments Birthday 07 – DCS17058 and Birthday 08 – DCS17059. I always wanted to try this type of miniature card! I just love the way you get the 3-D effect when you open the card.  So much fun. LOL!

Inside the card:

To make this card I used Lawn Fawn – Centre Picture Window Card to create the base card out of Hot Pink cardstock. The same dies were also used to create the centre pieces and banner using Your Next Stamp Designer Paper Pad – Birthday Girl. The same paper was also used to create the background on the card, front panel and side panels using Lawn Fawn – Centre Picture Window Card Add-On dies. Your Next Stamp – Mini Balloon Trio Die Set was used to die cut the floating balloons and then I tied some black thread to the base of the balloons. I cut 3 small pieces of clear plastic about a 1/4″ wide and attached the double-sided tape to the back of the balloon and at the base of the plastic as well to be used later.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card and also the sentiments onto the patterned pieces. I coloured the image in with Copic markers and then fussy cut around it.

I assembled the card using double-sided tape for each of the panels and centre pieces. I attached the balloons by putting 2 behind the presents and 1 from the top centre piece. Lastly, I added a little bit of double-sided tape to the bottom of the coloured image and attached it to the front of the main centre piece. For the sentiment on the front panel, I inked around the edges with Tim Holtz Distress Ink – Fossilized Amber and then popped it up using 3M VHB – 2 sided tape. I added 2 balloons and used a black marker to create the tails for the balloons.

Card Recipe:

Stamps: Meow Meow 01 – D20013 – Dreamerland Crafts

Sentiments: Birthday 07 – DCS17058 – Dreamerland Crafts, Birthday 08 – DCS17059 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Fossilized Amber

Paper: Copic Marker X-Press It Blending Card, Your Next Stamp Designer Paper Pad – Birthday Girl – 6″ x 6″

Die Cut: Lawn Fawn – Centre Picture Window Card, Lawn Fawn – Centre Picture Window Card Add-On, Your Next Stamp – Mini Balloon Trio Die Set (YNSD241)

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Kitten: C8, C6, C4, R30, R24, R20 (Noses – Sakura Glaze – Black)

Cake and Icing:  RV66, RV55, RV52, RV06, RV04, RV02, G02, Y08, YR16

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Have A Beary Special Day!

Jun12

Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a birthday card that I made with Dreamerland Crafts stamp called With My Love – D19024. This little bear is on his way to wish someone a “Beary Good Birthday”!

 

To make this card I used a base card of 4.25″ x 5.5″. I stamped the image onto Copic Marker X-Press It Blending Card using Memento – Tuxedo Black ink and my MISTI. I coloured in the image and background with Copic markers and then used my Brother Scan and Cut to cut around it.

I cut out at rectangle 4.25″ x 5.5″ from Hammermill – Premium Colour 100 lb. paper and then I used various dies and Tim Holtz inks to create the background. I have listed them below. I had die cut templates using the dies which makes it really easy to create the backgrounds.

I stamped the sentiment from Jaded Blossom – Forest Friends using Versa Fine – Onyx Black ink and my MISTI onto some Turquoise Cardstock. I used Ranger – Clear Super Fine Detail embossing powder and then heat embossed the powder with Marvy Uchida – Embossing Heat Tool. Next, I edged around the background sentiment outer edges with Tim Holtz Distress Ink – Peacock Feathers. I went around the main image outline with Copic Markers – B000 and YG03. Then, I popped up the image with 3M VHB – 2 sided tape and added in some balloons which I die-cut using Your Next Stamp – Mini Balloon Trio Die Set and drew little strings from them.

Card Recipe:

Stamp:  With My Love – D19024 (Dreamerland Crafts)

Sentiment: Jaded Blossom – Forest Friends

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Mermaid Lagoon, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Inks – Peeled Paint, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Inks – Peacock Feathers

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Crafts – Sparkling Stickers – 02-3068629, Hammermill – Premium Colour 100 lb.

Die Cuts: Your Next Stamp – Mini Balloon Trio Die Set (YNSD241), Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie, Lawn Fawn – Grassy Hillside Borders

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Bear: E33, E31, E30, E29, E27, E25, E23, R22, R20

Balloon: R59, R37, R35, R24

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Birthday Banner Gnome

Jun7

Today I’m sharing Banner Gnome (KLM Digital Designs) from KLM Digital Designs new release. I thought it would be fun to put the new banner stamp inside a banner. This was such an awesome stamp to play with and it comes with 3 different sentiments, “Happy Birthday” as shown here, “Your Awesome” and “Congratulations”.

When I first started colouring this card, I had something totally different in mind for how I was going to colour the scroll. But, once I created the background, I decided to colour it using bluish green tones for the top and bottom of the large scroll.

I printed out the main image twice onto Copic Marker X-Press It Blending Card using my HP Printer. I always print using Grayscale because the image won’t smudge when you go to colour. I found that printing out in black sometimes did. I used my brother Scan N’ Cut to cut around 1 of the images. Then fussy cut it where I still needed to. As I mentioned, once before, I’m still learning how to use my new machine.

For the other image, I die cut around it using Penny Black – Paper Scroll and my Cuttlebug. I coloured in the main image with copics. Then I placed the other image that I had cut around earlier over top of it to use it as a mask. I also used some Post-It Note paper to mask off the top and bottom of the main scroll. I used a Picket Fence Studio’s brush and went over the entire background inside the scroll with Tim Holtz Distress Inks – Tumbled Glass. Then, I placed Kraftin’ Kimmie – Confetti Stencil over top of everything. I have a large magnetic mat, so I just used some strong magnets to hold everything in place. Then, using the various sized Picket Fence Studio brushes which I labelled in various colours, I used a mixture of Tim Holtz inks to create the background. All of the colours are listed below.

I removed all of the masked pieces and then completed the colouring of the large scroll.

Lastly, I attached the entire image to some Recollections Purple Passions cardstock cut at 5.5″ x 4.25″ and added some small balloons which I had die cut previously using Your Next Stamp – Mini Balloon Trio Set.

Card Recipe:

Stamp and Sentiment: Banner Gnome (KLM Digital Designs)

Inks: HP Printer Greyscale, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Distress Inks – Peacock Feathers, Tim Holtz Distress Ink – Wilted Violet, Tim Holtz Distress Ink – Mermaid Lagoon, Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Ink – Cracked Pistachio

Paper: Copic Marker X-Press It Blending Card, Recollections – Purple Passions 8.5″ x 11″

Die Cuts: Penny Black – Paper Scroll 51-458, Your Next Stamp – Mini Balloon Trio Die Set (YNSD241)

Stencil: Kraftin’ Kimmie – Confetti

Tools: Cuttlebug

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W5, W4, W3, W2, W1, W0, W00

Hat: BG49, BG15, BG13, BG11

Boots: E29, E27, E25, E23

Pants: B26, B23, B21

Shirt: G43, G24, G21, G20

Pencil: YR31, YR21, YR20, YR14, Y19, Black

Paintbrush: B69, B18, B16, C3, C2, C1, Y15, Y11, BG02, BG01, BG00

Banners: BG05, BG02, BG01, BG00, BG000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Birthday Wishes Come True!

Jan1

Sharing a birthday card that I made for a friend using the images and sentiments from Birthday Song CYNS724 (#Your Next Stamp).

Inside of the card:

Stamp and Sentiments: Birthday Song CYNS724 (Your Next Stamp)

Paper: Copic Marker X-Press It Blending Card, Echo Parks Paper Co. – Birthday Wishes by Alisha Gordon – 6″ x 6″ Paper Pads, Echo Park Paper Co. – Happy Birthday Boy 6″ x 6″

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Die Cuts: Mini Balloon Trio Die Set (YNSD241) (#Your Next Stamp)

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Miscellaneous: MISTI – Most Incredible Stamping Tool

Coloured With Copic Markers:

Dogs: E53, E51, E39, E37, E35, E34, E33, C9, R37, R35, R32

Hats: Y19, Y08, Y02

Guitar: B39, B37, B34

Shadow: C2, C1, Colorless Blender

Beary Happy Birthday!

May19

Welcome Dreamerland Crafts Fans!

Today I’m sharing a card that I made with this little bear serving up a nice big cake for a very special person.  I used Super Tall Cake Dreamerland Crafts Clear Stamps and Birthday Sentiments Set 002 Dreamerland Crafts Clear Stamps to create this card.

Card Recipe:

Stamp: Super Tall Cake Dreamerland Crafts Clear Stamps,  Birthday Sentiments Set 002 Dreamerland Crafts Clear Stamps

Paper: Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Copic Marker X-Press It Blending Card, Craft Glitter Cardstock – Green, Craft Sparkling Stickers – Hot Pink

Ink: Tim Holtz Distress Ink – Picked Raspberry, Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Fossilized Amber

Die Cuts: My Creative Time – Scalloped Stitched Oval Dies, Craftin Desert Diva’s “Banner Dies”, Craftin Desert Diva’s Party Dies, Your Next Stamp – Mini Balloon Trio Die Set (YNSD241)

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Copic Markers

Bear: E53, E51, E50, E29, E25, E23, E21, R20, R02, Eyes (Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Cake: E18, E17, E15, E13

Cake Topping, Bear Apron: RV19, RV09, RV04

Bunny: W4, W2, W0

Mitts, Cake Apron, Boots: BG07, BG05, BG02

Hat: N1, N0, Colourless Blender

Cart: W4, W2, W0, C6

Shadow: C3, C2, C0, Colourless Blender

Background: R83, R81, RV52

 

 

Party Animals

Mar6

Welcome OCS Fans!

Sharing a fun card featuring: High Hopes – Wild Party and sentiment High Hopes – Birthday Party Animals! I just love these little characters.

 

I first stamped the sentiment using Tim Holtz Distress Inks – Dusty Concord and then to emboss it I used some Versamark and Ranger – Clear Super Fine Detail embossing powder. Using my MISTI, made this very easy to do. I decided to add a little bit of bling as well, so I die cut a few small balloons and added them on each side of the sentiment. I also decided to give them some fuzzy pop-poms on their hats to finish them off. Enjoy!

Card Recipe:

Stamps: High Hopes – Birthday Party Animals J058; High Hopes – Wild Party T102

Background Paper: Forever In Time Perfect Prints – SP228-31 Party Monsters (6 x 6 in.)

Inks: Tim Holtz Distress Inks – Dusty Concord, Memento – Tuxedo Black, Versamark

Die Cuts: Your Next Stamp – Mini Balloon Trio Die Set, My Creative Time -Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Gelly Roll Sakura #8 Pen

Party Animals stamped onto Copic Marker X-Press It Blending Card and then coloured in with Copics:

Dragon: YG01, YG03, YG13, YG17, V04, V06, V09, G14, G17, G07, BV11, BV13, BV17
Moose: E21, E23, E25, E29, E51, E53, E55, E57, BV17, BV13, BV11
Monster: BG02, BG05, BG07, E19, E17, E15, W9, W7, E97, E19, E08
Bear: E31, E33, E35, E37, BG02, BG05, BG07
Monkey: E51, E53, E55, E57, E59, BG15, BG13, BG11, BG05, BG07, BG09
Racoon: Black, W10, W9, W7, C9, C7, C5, C3, C1, G99, G95, G94
Horn: E15, Y28, YR6, YR24
Mouths: EE95, E93, R17
Background:  BV0000
Balloons: G14, G17, G07, BG02, BG05, BG07
Confetti: YG13, YG97, YG93, BV00, BV02, BV04, BV11, BV13, BV17, Y19, Y17, Y15

 

Be sure to visit the One Crazy Stamper blog for your daily inspiration, and check out our Facebook page, Pinterest and Twitter as well!