Tag Archive | Tim Holtz Distress Ink – Squeezed Lemonade

High Tides


Sharing a card I made today using KLM Digital Design –  Beach Gnome from the new May 2022 release. This image also comes with 2 more sentiments, “Life is better at the beach” and “Enjoy the little things”.

I imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers. I created the pattern on his shirt to make it look a little wild. Using scissors, I fussy cut around the coloured image. I also fussy cut around the sentiment, splitting it into 2 parts. I ran them through a Xyron Create a Sticker and adhered them directly to Recollections – Black cardstock. Once again, I fussy cut around the sentiments. I added U-Line double-sided tape to the backs of the sentiment and image and set them aside.

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardsstock. I cut another panel to be the same size as the card base. Using Tim Holtz Distress Ink – Squeezed Lemonade ink, a Picket Fence – Blending Brush and Kraftin’ Kimmie – Sunburst stencil, I created the sunny background. I did this by first laying down the yellow background and then putting the stencil over top to make the sun rays a little brighter. Using Krafty Kolours – Sandy Shores ink, I created the sandy shore. For the waves, I thought the paper from Bo Bunny – Down by the Sea Collection was perfect. Using the coloured image as a guide for placement, I cut along the wavy lines with the piece measuring approximately 1.75″ x 4.25″. Using a finger dauber and Tim Holtz Distress Ink – Evergreen Bough, I inked along the top and bottom of the waves to remove the white. Using Tim Holtz Distress Inks – Tumbled Glass and a Picket Fence – Blending Brush, I added a bit of tint to the patterned paper. Using glue, I attached it to the background panel. I added in a small shadow under the sandals with Copic markers.

The card was now ready to assemble. I attached the panel to the base card using double-sided tape. I removed the tape backing from the image and sentiment and popped them both up onto the card. Using a button shank remover, I removed the backs to the Dress It Up Buttons. I applied some glue to the backs of each of them and placed them onto the card to finish it off.

Card Recipe:

Stamp and Sentiment:  Beach Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Squeezed Lemonade, Krafty Kolours – Sandy Shores, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Bo Bunny – Down by the Sea Collection (6″ x 6″ Paper Pad), Recollections – Black

Stencil: Kraftin’ Kimmie – Sunburst

Embellishments: Dress It Up – Ocean View, Dress It Up – Seashells At The Seashore

Miscellaneous: U-Line – 2 sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Xyron Create a Sticker, Picket Fence – Blending Brushes

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E47, E44, E43, E41

Hat and Sandals: B26, B23, B21

Shirt: Y38, Y35, Y15, YR16, Gelly Roll Sakura #10 Pen

Bathing Suit: BG09, BG05, BG02, BG01

Sunglasses: BG09, BG05, BG00, Gelly Roll Sakura #5 Pen

Shadow Under Sandals: E35, E34, E33

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Rain or Shine!


Sharing a card I made today using Penny Black Stamps – Rain or Shine. My husband and I always celebrate the first day that we started going out together and also our wedding anniversary each year. Yesterday, marked 36 wonderful years together. We had bears on the top of our wedding cake, so I thought it would be great to make him a card with bears to celebrate our special day.

To make my card, I started out with Hammermill – Premium Colour 100 lb. cardstock to create a card base of 5.5″ x 4.25″. Using My Creative Time – Rectangle Frame Dies and my Cuttlebug, I die cut a small rectangle into the front of the card. For the raindrops, I first applied some Post-It tape down the centre of the card and then applied Tim Holtz Distress Inks – Tumbled Glass with a Picket Fence – Blending Brush. I placed Kraftin’ Kimmie – Rainy Day Stencil over top of this blue section and this time I applied Tim Holtz Distress Ink – Salty Ocean. I removed the stencil and the Post-it Note tape and covered the centre where the blue colour ended. Using a Picket Fence – Blending Brush and Tim Holtz Distress Ink – Squeezed Lemonade, I applied yellow to the entire right side of the card. Lastly, I placed Kraftin’ Kimmie – Starburst Stencil over top and using the same brush, I applied Tim Holtz Distress Ink – Mustard Seed. I die cut the word “Happy” using My Creative Time – Happy Everything Stamp Set and Recollections – Black cardstock. Lastly, using a sentiment from the same stamp set, I stamped and heat embossed the word “Anniversary” using Versa Fine – Onyx Black and Ranger – Clear Super Fine Detail embossing powder.

Here is the inside of the card.

I stamped the image onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. I die cut it using Lawn Fawn – Zig Zag Square Stackables and coloured in the image with Copic markers. Using my MISTI again, I heat embossed the sentiment onto Recollections – Black cardstock using VersaMark and Ranger Embossing Powder White – Extra Fine Detail. Gina K. Designs – Master Layouts – #9 was used to die cut the sentiment. I applied glue to the back of the image and sentiment and attached them both to the inside of the card.

Card Recipe:

Stamp and Sentiments: Rain or Shine (Penny Black Stamps) and Happy Everything Stamp Set (My Creative Time)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Squeezed Lemonade, Tim Holtz Distress Ink – Mustard Seed, Versa Fine – Onyx Black, VersaMark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Black cardstock

Die Cuts: Lawn Fawn – Zig Zag Square Stackables, My Creative Time – Rectangle Frame Dies, My Creative Time – Happy Everything Stamp Set, Gina K. Designs – Master Layouts – #9

Stencils: Kraftin’ Kimmie – Rainy Day Stencil, Kraftin’ Kimmie – Starburst Stencil

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Picket Fence – Blending Brushes

Image coloured with Copic Markers:

Bears: E53, E51, E50, E35, E34, E33, E31, E27, E25, E23, E21 (Eyes: Sakura Glaze – Black and Gelly Roll Sakura #10 Pen)

Umbrella: R46, R14, R12, R08, B26, B24, B23, B21, Y19, Y17, Y13, Y11, YR16, YR15, YR14, YR12, YG09, YG07, YG06, YG03, V04, V01, E49, E47, E44

Grass: YG23, YG17, YG03, YG01

Sky: B02, B01, B00, B000

Hope you like it and have a great week!

Hang in There!


It’s Wednesday, and this week, I thought I’d make an inspirational card to share with you using Raggedy Ann-ouncement – R044 (High Hopes Rubber Stamps) for the main image and Hang In There – D278 (High Hopes Rubber Stamps) for the sentiment.

To make my card this week, I started off with a card base of 5.5″ x 4.25″.  I created the background on Hammermill – Premium Colour cardstock using various stencils, Picket Fence Studio Blender Brushes and Tim Holtz inks which I have listed below. I thought the sun rays reflected a ray of hope for everyone and I hope that we will all be seeing better days soon. Once the background was finished, I used 2 sided tape and mounted it onto the base card.

I stamped the image  and sentiment onto Copic Marker X-Press It Blending Card and coloured in the main image with Copic markers. I ran the coloured image through my Brother Scan and Cut to create a slim border around it and then went around the edges with Y06 – Yellow and YG25 – Celadon Green to make it blend into the background. Lastly, I popped up the image using 3M VHB – 2 sided tape and created a small shadow below Raggedy Ann.

Card Recipe:

Stamp:  Raggedy Ann-ouncement – R044  (High Hopes Rubber Stamps)

Sentiment: Hang In There – D278 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Squeezed Lemonade, Tim Holtz Distress Ink – Mustard Seed, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Stencil: Kraftin’ Kimmie – Starburst, Lawn Fawn – Lawn Cut dies (Made into Stencil), Kraftin’ Kimmie – Krafty Scenery 2

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Picket Fence Studio Blender Brushes

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20

Hair: R35, R17, R14, R08

Dress: R59, R37, R35

Patch: B52, B41, B12

Apron and Socks: C-2, C-1, C-0

Shoes: C10, C8, C5, C3

Sign: E37, E35, E33, E31, E30

Shadow below feet: YG25, YG06, YG03

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Dog Sympathy Card


Hi There,

Sharing a dog sympathy card that I made. It is always very hard losing one of our furry friends, especially when we cherish them as if they were our children. They say that we will meet again someday over the Rainbow Bridge so I drew in a rainbow on my card.

The stamps were all stamped with my MISTI – Most Incredible Stamping Tool.

Dog – Kraftin’ Kimmie Stamps – Furry Friends. Stamped onto Copic Marker X-Press It Blending Card and then coloured in with Copic markers. Stamped wings onto Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″ and then fussy cut around them and attached them to the original image.

Sentiment – Kraftin’ Kimmie Stamps – Furry Friends. Stamped onto red paper with Versamark ink and then embossed with Ranger Embossing Powder White – Extra Fine Detail. Added in footprint with paw print from Stampin Up.

Die Cuts – Cut glittery clouds using Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″ and Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie.

Background – Fierro Aquarelle Watercolour Paper – Tim Holtz Distress Oxide – Faded Jeans and Tim Holtz Distress Oxide – Broken China. Rainbow combination of Tim Holtz Distress Inks – Candied Apple, Tim Holtz Distress Ink – Spiced Marmalade,  Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Wilted Violet and Tim Holtz Distress Ink – Squeezed Lemonade.

Entered into http://kraftinkimmiestamps.blogspot.ca/2018/03/challenge-424-glitter.html

 

Hope you like it!