Tag Archive | DCWV – Pocket Blossom –  12″X12″ (30.5cmx30.5cm)

Dance With Me!!

Sep5

Today, I’m sharing a card that I made using Dreamerland Crafts stamps called Just Dance With Me – DCS17037. Sometimes just dancing with our partners or friends can bring such joy to us. No matter where you may be, just hear the music and dance no like no one is watching!

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. The sky was created using Lawn Fawn Cuts – Cloudy Stencil, a  blender brush and Tim Holtz Distress Inks – Salty Ocean and Broken China. To create the grass, I first cut 2 pieces of DCWV – Pocket Blossom designer paper to the sizes of 5.5″ x 2.5″ and 5.5″ x 1-5/8″.  Lawn Fawn – Grassy Hillside Borders die cuts and my Anna Griffin Empress Mini Cutting Machine were used to die cut the 2 pieces. Using a blender brush and Tim Holtz Distress Ink – Rustic Wilderness, I inked over top of the blades of grass and then around the other 3 edges.

The main image was stamped using my MISTI and Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card. I coloured in the image and then fussy cut around it leaving a slim white border. U-Line double-sided tape was added to the back of the image. I then placed the image onto the card before removing the tape backing to see where to place the sentiment. Using my MISTI again and Versa Fine – Onyx Black ink, I applied the sentiment onto the base card. Ranger – Clear Super Fine Detail embossing powder was then applied to it and it was heat embossed with Marvy Uchida – Embossing Heat Tool.

The final pieces of the card were now ready to assemble. I peeled off the tape backings from the large die-cut and added some liquid glue to allow me to move it into the correct position over top of the grass I had placed down earlier onto the base card. After popping up the top grass cut, I then repeated the same process and popped up the image in between the blades of grass. Finally, I added in some butterflies from the same stamp set using Tim Holtz Distress Ink – Wilted Violet. I had made them lighter by first stamping off of the page and then onto the card.

Card Recipe:

Stamps: Just Dance With Me – DSC17037 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness, Wilted Violet, Salty Ocean and Broken China, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., DCWV – Pocket Blossom – 12″X12″ (30.5cmx30.5cm)

Die Cuts: Lawn Fawn – Grassy Hillside Borders

Stencil: Lawn Fawn Cuts – Cloudy Stencil

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, Anna Griffin Empress Mini Machine, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R30, R20

Hair: E47, E44, E43, E41

Dress: V06, V04, V01, V0000, Gelly Roll Sakura #10 Pen

Shirt: BG72, BG57, BG32, BG11

Jeans: B26, B23, B21

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

AHH – 60!!

Aug25

Sharing a birthday card I made for a friend using Art Impressions – AHH Set – A4671 and Rock On Laugh Lines – 5422. I was late getting this birthday card out to my friend as usual and this face says it all. LOL!

To make the card, I began with the base of 8.5″ x 7″ Hammermill – Premium Colour cardstock, scored and folded to the size of 8.5″ x 3.5″. Using my MISTI and Memento – Tuxedo Black ink, the images were stamped onto Copic Marker X-Press It Blending Cardstock and coloured in with Copic Markers. Once the images were coloured, I fussy cut around them both. For the blouse, I stamped the image again onto DCWV – Pocket Blossom paper and paper-pierced it onto the image after I had run it through my Xyron Create a Sticker. For the image on the front page, a black marker was used to outline all of the edges.

For the front of the card, I die cut 3 balloons using my Anna Griffin Empress Mini Machine, Concord & 9th – Pop-Up Par-Tay dies and Pergamano Parchment Paper – Rainbow Pastel and 1 balloon out of a spare piece of patterned paper to use for the inside of my card. The numbers were cut from Recollections – Black cardstock using my cutting machine and Lawn Fawn Lawn Cuts – Henry’s 123s. To create the background, I used multiple Tim Holtz Distress inks listed below, multiple brushes and Lawn Fawn – Confetti Stencils to create the background on the base card front.  The sentiment was stamped with a MISTI, Versa Fine – Onyx Black ink and then embossed with Ranger – Clear Super Fine Detail Embossing Powder. Marvy Uchida – Embossing Heat Tool was used to heat the embossing powder. Then, I fussy cut around it.

The front of the card was now ready to assemble. I ran each of the numbers through my Xyron Create a Sticker and the balloons through my Xyron Creative Station. The numbers were then placed onto the balloons. I attached the first 2 balloons to the card and then drew in the strings with a black marker. I then added the last balloon and drew another string. A white pencil was used to create a bit of glow along the left side of the balloons. After attaching U-Line double-sided tape to the back of the sentiment and the image, I popped them up onto the front of the card.

Inside of the card: 

For the inside of the card, I used Rock On Laugh Lines – 5422 – Art Impressions, Dance It Out Set – 5278 – Art Impressions, Be Happy Laugh Lines – 5279 – Art Impressions for the sentiments. I cut out 3 sentiment bubbles using Anna Griffin Empress Mini Machine, Spellbinders – Die D-Lites Conversation Bubble 3 Etched Dies out of white cardstock. I stamped each of sentiments using a MISTI, Versa Fine – Onyx Black ink and then embossed with Ranger – Clear Super Fine Detail Embossing Powder. Marvy Uchida – Embossing Heat Tool was used to heat the embossing powder. I ran each of the sentiment bubbles and my image through my Xyron Creative Station.

The inside of the card was now ready to assemble. I placed the 1 bubble sentiment at the top of the card and then using my image as a guide for placement, I attached the patterned balloon to the card first. The image was attached on top of it and then I added the bottom bubble sentiment. Lastly, I placed the final bubble sentiment to the card in between the other top 2 bubble sentiments to complete the card.

Thankfully, she loved her card and I hope you do too!

Card Recipe:

Stamp and Sentiments: AHH Set – 4671 – Art Impressions, Rock On Laugh Lines – 5422 – Art Impressions, Dance It Out Set – 5278 – Art Impressions, Be Happy Laugh Lines – 5279 – Art Impressions

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Peacock Feathers, Mustard Seed, Wilted Violet and Evergreen Bough, Saltwater Taffy, Mowed Lawn, Spiced Marmalade

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., DCWV – Pocket Blossom – 12″X12″ (30.5cmx30.5cm), Pergamano Parchment Paper – Rainbow Pastel, Recollections – Black cardstock

Die Cuts: Lawn Fawn Lawn Cuts – Henry’s 123s, Concord & 9th – Pop-Up Par-Tay, Spellbinders – Die D-Lites Conversation Bubble 3 Etched Dies

Stencil: Lawn Fawn – Confetti Stencils (6″ x 6″)

Embossing Powder: Ranger – Clear Super Fine Detail

Miscellaneous: Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Anna Griffin Empress Mini Machine, Xyron Create a Sticker, Xyron Creative Station

Image coloured with Copic Markers:

Skin and Lips: E21, E11, E00, E000, R89, R59, R39, R37, R30, R20

Hair: E08, YR18, YR16, YR12, B60, BV20, C1

Clothing – Lady1

Pants: B26, B23, B21

Blouse: Paper Pieced: DCWV – Pocket Blossom – 12″X12″ (30.5cmx30.5cm), YG67, YG61, Colorless Blender

Earings: YG67, YG63, YG61

Shoes: YT9, T7, T5

Clothing – Lady2

PJ’s: BV08, V17, V15, V12, V01

Slippers: V17, V15, V12, R30, R20, B60, BV20, Colorless Blender

Chair: E29, E27, E25, E23

Shadow: C3, C2, C1

Hope you like it and have a great week!

Friends Together

Aug25

Welcome Back Dreamerland Craft Fans!

Today, I’m sharing an inspirational card that I made using Mix and Match Clear Stamps – DCS 19096 to create the little scenes and also for the sentiment. I wanted to show a variety of scenes that you could make with this cute set and so for the first time for me ever, I created this little flip card.

Panel 1 – Bears hugging in the rain.

Panel 2: The rain has stopped and there is a beautiful rainbow for the little couple.

Panel 3 – The sun has come out and is now beaming.

Panel 4: I just love this adorable sentiment and it finishes off the little story of the 2 little bears hugging each other through all of the different types of weather.

Here is the flip card in action.

 

To make this card I used a base card of 4.25″ x 5.5″. DCWV – Pocket Blossom was cut to the same size and using double-sided tape was attached to the base card. Then, Tim Holtz Distress Ink – Salty Ocean was used to ink around all of the edges. I die cut X-Press It Blending Card using my Cuttlebug and dies from Lawn Fawn – Flippin’ Awesome. I used the largest square of the die set in order to have more room to create the scenes. The larger square was die cut using Recollection – White paper using My Creative Time – Rectangle Frame Dies. The die-cut for the mechanism of the Flip Card was also from Lawn Fawn – Flippin’ Awesome. So easy to use. I love this die set.

I created a mask of the bears so that I could add in the different elements on each panel. All of the images were coloured in with Copic Markers. For the rain, Memento – Bahama Blue ink was used. For the sunbeams, Kraftin’ Kimmie – Summer Sunshine, Kraftin’ Kimmie – Yummy Yellow and Kraftin’ Kimmie – Starburst Stencil were used.

Versa Fine – Onyx Black ink was used to stamp the sentiment and then Ranger – Clear Super Fine Detail embossing powder was applied. Marvy Uchida – Embossing Heat Tool was used to heat up the embossing powder.

Once all of the panels were completed, I die cut the sparkly blue paper using Lawn Fawn – Flippin’ Awesome – Add-On dies. The flipping mechanism was then attached to the sparkling blue paper. This was then attached directly to the base of the card.

Card Recipe:

Stamps and Sentiments:  Mix and Match Clear Stamps – DCS 19096 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Kraftin’ Kimmie – Summer Sunshine, Kraftin’ Kimmie – Yummy Yellow, Memento – Bahama Blue, Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, DCWV – Pocket Blossom –  12″X12″ (30.5cmx30.5cm), Craft Thick Glitter Paper – 02-3022270

Die Cuts: My Creative Time – Rectangle Frame Dies, Lawn Fawn – Flippin’ Awesome, Lawn Fawn – Flippin’ Awesome – Add-On

Stencil: Kraftin’ Kimmie – Starburst Stencil

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Bears: E55, E53, E51, E35, E34, E33, E31, E29, E27, E25, E23, R20, R02, R00

Sky:  B01, B00, B000, B000

Hearts and Umbrella: R39, R37, R24, Pental Sunburst Metalic Med Gel Pen

Rainbow: V17, V15, V20, YR18, YR16, YR15, Y15, Y08, Y04

Clouds: B60, C0, Colorless Blender

Flowers: Y38, Y35, E15

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.