Tag Archive | Tim Holtz Distress Ink – Spiced Marmalade

I Don’t Bite….Usually!!


Today I’m sharing  Vampire Gnome (KLM Digital Designs) image from the October release. This adorable little Gnome comes with 5 different sentiments. Two of them, I have used here. The others are “2020 Sucks”, “Bats About You” and “Don’t Let These Times Drain You”. I love this little gnome and with these fun sentiments, there are so many different cards that you can make.

I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. I used my Brother Scan and Cut to cut around the image and coloured it in with Copic markers.  I added some Clear – Wink of Stella to the stars, moon and coloured squares on his hat and gown. The sentiments were printed out on orange cardstock. I cut them and then inked around the edges with Tim Holtz Distress Ink – Spiced Marmalade.

For the oval, I used Echo Park – I Love Halloween paper and die cut using my Cuttlebug and My Creative Time – Scalloped Stitched Oval Dies. I also, used this paper on the top and bottom of my card. For the centre background, I used To Every Season – Stampin’ Up paper. I used some double-sided tape to join the top paper with stars to the haunted house background. Then I cut the background to 5.25″ x 4″ and inked around all of the edges with Tim Holtz Distress Ink – Black Soot. I also used the same ink to go around the edges of the oval.

To assemble the card, I began with an orange card base of 5.5″ x 4.25″ by using a pre-cut card by The Paper Studio – Primary Base Colours. The edges were all inked with Tim Holtz Distress Ink – Black Soot. The background was adhered to the base using double-sided tape. The image, sentiments and oval were both popped up using 3M VHB – 2 sided tape. Finally, some Recollections Bling Stickers were added as embellishments to finish off the card.

Card Recipe:

Stamp and Sentiments: Vampire Gnome (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Ink – Spiced Marmalade

Paper: Copic Marker X-Press It Blending Card, To Every Season – Stampin’ Up, Echo Park – I Love Halloween, The Paper Studio – Primary Base Colours

Die Cuts: My Creative Time – Scalloped Stitched Oval Dies

Tools: 3M VHB – 2 sided tape, Cuttlebug, Recollections Bling Stickers, Clear – Wink of Stella

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W5, W4, W3, W2, W1, W0, W00

Cape and Hat: V09, V06, V04, E15, Y38, Y35, Y15, YR18, YR16, YR12, YG25, YG23, YG11, R59, R39, R37, R35

Bat: N10, N8, N6, Sakura Glaze – Black for the eyes

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Little Nutty Buddy


It’s Wednesday, and this week I’m sharing a card featuring Little Nutty Buddy – M150 from (High Hopes Rubber Stamps) with the sweet sentiment Happy Fall Y’all – G086 (High Hopes Rubber Stamps). My husband and I went on a wonderful nature walk this past weekend through the forest to see to falls. It was very beautiful seeing the fall colours and the little squirrels running around gathering acorns for their winter supply of food, just like little Nutty Buddy.

To create the card this week, I began with base card 5.25″ x 4.25″ from The Paper Studio – Primary Base Colours. I inked around all of the edges with Tim Holtz Distress Inks – Ground Espresso. The scalloped circles were die cut using my Cuttlebug and Spellbinders Nestabilities – Petite Scalloped Circles – Large. For the larger circle – AC Cardstock – Autumn was used and then inked around with the same ink used on the base card. The background acorn paper was die cut using My Creative Time – Rectangle Frame Dies. Both of the background papers are from Your Next Stamp – Fabulous Fall collection. I inked around the patterned die cuts with Tim Holtz Distress Ink – Spiced Marmalade.

The sentiment was stamped with Memento – Tuxedo Black ink and then Nellie Snellin Die – MFD 007 was used to cut it out. I then cut the border part of the die cut off and just left the oval centre. This was inked with Tim Holtz Distress Ink – Spiced Marmalade. 2 Kraftin’ Kimmie – Holiday Dots were added on both sides.

I stamped the main image onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. It was coloured in with Copic Markers. Then I put it through my Brother Scan and Cut to create the thin white border around the image.

To assemble the card, I attached the main background and large scalloped circle directly to the base using 2-sided tape. The sentiment, smaller scalloped circle and image were popped up with 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Little Nutty Buddy – M150 (High Hopes Rubber Stamps)

Sentiment: Happy Fall Y’all – G086 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Spiced Marmalade, Tim Holtz Distress Inks – Ground Espresso

Paper: Copic Marker X-Press It Blending Card, The Paper Studio – Primary Base Colours, AC Cardstock – Autumn, Your Next Stamp – Fabulous Fall – 6″ x 6″

Die Cuts: My Creative Time – Rectangle Frame Dies, Nellie Snellin Die – MFD 007, Spellbinders Nestabilities – Petite Scalloped Circles – Large

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, Kraftin’ Kimmie – Holiday Dots, Brother Scan and Cut

Image coloured with Copic Markers:

Squirrel: E99, E97, E55, E53, E51, E11, E08, YR18, YR15, R22, R02, 100

Acorns: E15, YR27, YR24, YR15, Y19, E55, E53, E51, E27, E25, E23

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Make it Rain!


Sharing a fun birthday card that I made for my husband this week using Make It Rain – CYNS728 (#YourNextStamp) for the main image and sentiment. I thought it would be fun to put the image inside a balloon too! Now if only that could be Lottery Winnings he was holding onto. LOL!

To make my card this week, I started out with a simple lime green card base, sized at 5.5″ x 4.25″.  For the bottom layer I used Hammermill – Premium Colour 100 lb. paper and multiple Tim Holtz inks which I have listed below. Then I die-cut the top layer with my Cuttlebug and #Your Next Stamp – Confetti Panel Die. Hammermill paper was used for this also. I mounted the bottom layer directly onto  the base card and then attached the top die-cut layer using 3M VHB – 2 sided tape.

For both of the sentiments, I used my MISTI, VeraMark ink and Ranger Embossing Powder White – Extra Fine Detail on black cardstock. Then a Marvy Uchida – Embossing Heat Tool was used to heat emboss the powder.

The balloon was die cut using My Creative Time – Stitched Circle Balloon Dies MCT-D137 to cut Copic Marker X-Press It Blending Card which I then stamped the main image onto using Memento – Tuxedo Black ink and my MISTI. The image was coloured with Copic Markers.

To assemble the remainder of the card, the image and sentiment were popped up on top with 3M VHB – 2 sided tape. Some ribbon was tied to the bottom of the balloon and some Kraftin’ Kimmie dots were used.

Card Recipe:

Stamp and Sentiment: Make It Rain – CYNS728 (#YourNextStamp)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Barn Door, Tim Holtz Distress Ink – Carved Pumpkin, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Ink – Mermaid Lagoon, Tim Holtz Distress Ink – Mustard Seed, Tim Holtz Distress Ink – Spiced Marmalade, Tim Holtz Distress Ink – Twisted Citron, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: My Creative Time – Stitched Circle Balloon Dies MCT-D137, My Creative Time – Rectangle Frame Die Layers – MCT-D274Your Next Stamp – Confetti Panel Die – YNSD770

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, American Crafts – Premium Ribbon, Marvy Uchida – Embossing Heat Tool, Kraftin’ Kimmie Dots

Image coloured with Copic Markers:

Dog: E33, E31, E29, E27, E25, E23, R89, R59, R39, R37, R35, R24, C0, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen

Money: G99, G94, G21, G82, YG05, YG04

Balloon: BG09, BG07, BG05, BG000

Hope you like it and have a fantastic week!

 

 

Greatest Fisherman


It’s Wednesday, and this week, I used Norman – Q038 (High Hopes Rubber Stamps) for the main image and Worlds Greatest Fisherman – H159 (High Hopes Rubber Stamps) for the sentiment. Norman is very happy today as he caught a magnificent Lobster. My dad LOVES fishing and can’t wait to go fishing again. Hopefully, that time will come soon and then he’ll be smiling just like Norman with his big catch of the day!

To make my card this week, I started off with a card base of 5.5″ x 4.25″. I used Belle Blvd – Secrets of the Sea paper for the main background.

I stamped the image onto Copic Marker X-Press It Blending Card and then die cut it with my Cuttlebug and My Creative Time – More Stitched Circles. I cut a slightly larger circle out of Orange cardstock with Lifestyle Crafts Cutting Dies – Nesting Circles and glued it down on top of the background paper. I coloured in the background using a variety of Copic Refill inks, Colorless Blender and a Q-Tip which I used to apply the colours. For the water, I wisped several colours back and forth and then added some Copic Colorless Blender and wisped the colours one last time. Lastly, I added some white caps by dabbing Sharpie Water Based Paint – White – Extra Fine Point onto the surface. I completed colouring in the rest of the image with Copic markers and then popped it and the sentiment using 3M VHB – 2 sided tape. The sentiment was die cut with Die-Namics MFT-489 PCD Fishtail Figs STX.

Card Recipe:

Stamp:  Norman – Q038  (High Hopes Rubber Stamps)

Sentiment: Worlds Greatest Fisherman – H159 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black,

Paper: Copic Marker X-Press It Blending Card, Belle Blvd – Secrets of the Sea – 6″x8″, Orange Cardstock

Die Cuts: My Creative Time – More Stitched Circles, Die-Namics MFT-489 PCD Fishtail Figs STX, Lifestyle Crafts Cutting Dies – Nesting Circles

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20

Hair: C10, C8, C3, PrismaColor  Premier Pencils Black and White

Coat, Pants and Hat: Y17, Y15, Y13, Y11, C3

Hoody: B26, B23, B21

Shirt: G99, G85, G82

Boots: C10, C8, C5, C4, C3

Lobster: R17, YR18, YR09, YR04

Water: BG72, BG70, B93, B91, B52, B41, B000, C3, Colorless Blender, Q-Tip, Sharpie Water Based Paint – White – Extra Fine Point

Used Copic Refills and Q-Tip to Create Background:

Sand: E30, E31, Colorless Blender

Sky: B0000, B000, Colorless Blender

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Check out the High Hopes Website for something else to give you a big smile!

Over on the High Hopes Website there is a Store Wide sale, save 20% off right now when you use the coupon Code Love at the checkout!

 

Dog Sympathy Card


Hi There,

Sharing a dog sympathy card that I made. It is always very hard losing one of our furry friends, especially when we cherish them as if they were our children. They say that we will meet again someday over the Rainbow Bridge so I drew in a rainbow on my card.

The stamps were all stamped with my MISTI – Most Incredible Stamping Tool.

Dog – Kraftin’ Kimmie Stamps – Furry Friends. Stamped onto Copic Marker X-Press It Blending Card and then coloured in with Copic markers. Stamped wings onto Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″ and then fussy cut around them and attached them to the original image.

Sentiment – Kraftin’ Kimmie Stamps – Furry Friends. Stamped onto red paper with Versamark ink and then embossed with Ranger Embossing Powder White – Extra Fine Detail. Added in footprint with paw print from Stampin Up.

Die Cuts – Cut glittery clouds using Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″ and Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie.

Background – Fierro Aquarelle Watercolour Paper – Tim Holtz Distress Oxide – Faded Jeans and Tim Holtz Distress Oxide – Broken China. Rainbow combination of Tim Holtz Distress Inks – Candied Apple, Tim Holtz Distress Ink – Spiced Marmalade,  Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Wilted Violet and Tim Holtz Distress Ink – Squeezed Lemonade.

Entered into http://kraftinkimmiestamps.blogspot.ca/2018/03/challenge-424-glitter.html

 

Hope you like it!