Tag Archive | Lawn Fawn – Grassy Hillside Borders

Dance With Me!!

Sep5

Today, I’m sharing a card that I made using Dreamerland Crafts stamps called Just Dance With Me – DCS17037. Sometimes just dancing with our partners or friends can bring such joy to us. No matter where you may be, just hear the music and dance no like no one is watching!

To create this card I began by making a base of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. The sky was created using Lawn Fawn Cuts – Cloudy Stencil, a  blender brush and Tim Holtz Distress Inks – Salty Ocean and Broken China. To create the grass, I first cut 2 pieces of DCWV – Pocket Blossom designer paper to the sizes of 5.5″ x 2.5″ and 5.5″ x 1-5/8″.  Lawn Fawn – Grassy Hillside Borders die cuts and my Anna Griffin Empress Mini Cutting Machine were used to die cut the 2 pieces. Using a blender brush and Tim Holtz Distress Ink – Rustic Wilderness, I inked over top of the blades of grass and then around the other 3 edges.

The main image was stamped using my MISTI and Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card. I coloured in the image and then fussy cut around it leaving a slim white border. U-Line double-sided tape was added to the back of the image. I then placed the image onto the card before removing the tape backing to see where to place the sentiment. Using my MISTI again and Versa Fine – Onyx Black ink, I applied the sentiment onto the base card. Ranger – Clear Super Fine Detail embossing powder was then applied to it and it was heat embossed with Marvy Uchida – Embossing Heat Tool.

The final pieces of the card were now ready to assemble. I peeled off the tape backings from the large die-cut and added some liquid glue to allow me to move it into the correct position over top of the grass I had placed down earlier onto the base card. After popping up the top grass cut, I then repeated the same process and popped up the image in between the blades of grass. Finally, I added in some butterflies from the same stamp set using Tim Holtz Distress Ink – Wilted Violet. I had made them lighter by first stamping off of the page and then onto the card.

Card Recipe:

Stamps: Just Dance With Me – DSC17037 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness, Wilted Violet, Salty Ocean and Broken China, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., DCWV – Pocket Blossom – 12″X12″ (30.5cmx30.5cm)

Die Cuts: Lawn Fawn – Grassy Hillside Borders

Stencil: Lawn Fawn Cuts – Cloudy Stencil

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, U-Line double-sided tape, Anna Griffin Empress Mini Machine, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R30, R20

Hair: E47, E44, E43, E41

Dress: V06, V04, V01, V0000, Gelly Roll Sakura #10 Pen

Shirt: BG72, BG57, BG32, BG11

Jeans: B26, B23, B21

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Anniversary Gnomes!!

May3

Sharing a card I made today combining the image from KLM Digital Designs April Release called Bride Gnome and image and sentiment from Groom Gnome. These images could be used separately or together and come with multiple sentiments.

To make the card, I first imported the image into Microsoft Word and printed it out onto Copic Marker X-Press It Blending Card using my HP Printer. I coloured in the image with Copic markers. Then I printed them out again on regular copy paper and used my Brother Scan and Cut  to cut around them. I used these as masks over top of the coloured images. Using multiple Tim Holtz inks listed below, I created the sky with a stencil I had created from Avery Elle – Pierced Clouds Die and grass stencil I created from Lawn Fawn – Grassy Hillside Borders.

For the base card, Recollections – Christmas Cards and envelopes paper was used at the size of 5.5″ x 4.25″. I die cut the finished coloured image with Your Next Stamp – Stitched Rectangle Die Set (YNSD214) and glued it to the base.

Card Recipe:

Stamp: Bride Gnome – KLM Digital Designs, Groom Gnome – KLM Digital Designs

Sentiment: Groom Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink: Peeled Paint, Mowed Lawn, Crushed Olive, Salty Ocean, Broken China, Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Cards and Envelopes – 5″ x 6.5″

Die Cuts: Avery Elle – Pierced Clouds Die (D-05-01), Lawn Fawn – Grassy Hillside Borders, Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Beard: E49, E47, E44, E42

Hat and Tuxedo: C9, C7, C5, C3, C2

Shirt Sleeves: C00, Colorless Blender

Shoes: 100, C10, C8, C6, C5

Hair: E18, E08, YR18, YR14

Dress and Shoes : B60, C00, Colorless Blender

Flowers, Leaves, Vest and Ribbon: BV04, BV02, BV01, BV00, Y17, Y04, YG17, YG13, YG03, Gelly Roll Sakura #10 Pen

Hope you like it and have a great week!

Take advantage of this special at KLM Digital Designs!

MOTHER’S DAY SALE 20% OFF EVERYTHING UNTIL MAY 10TH
CODE:MOTHERSDAY21

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Ella the Elephant!!

Feb1

Today, I’m sharing a card using this adorable image from KLM Digital Designs new February release called Ella The Elephant. The image comes with 3 different sentiments. Like so many others, I’ve been missing my family and friends a lot due to Covid lockdowns, so I chose the “Miss You” sentiment for my card. Hopefully, times will get better this year and we’ll be able to see our distant families and friends again.

To make the card, I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. I used my Brother Scan and Cut to cut around the image and coloured it in with Copic markers.

I used AC White Cardstock for the base card size of 6″ x 6″ and ScrapBerry’s Tropics paper for the background. I ran the image through my Xyron Creative Station because I wanted it to lay flat on the background. I used my Cuttlebug to die cut the grass using Lawn Fawn – Grassy Hillside Borders and green cardstock. Then I edged around it using Tim Holtz Distress Inks – Peeled Paint. I applied double-sided tape to the back of the grass and applied it directly to the base, then I positioned the elephant in front and behind the grass.

Card Recipe:

Stamp and Sentiment: Ella The Elephant (KLM Digital Designs)

Inks: HP Printer Grayscale, HP Printer Black, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, AC White Cardstock, ScrapBerry’s Tropics – 6×6 Paper Collection, Lime Green cardstock

Die Cut: Lawn Fawn – Grassy Hillside Borders

Tools: Cuttlebug, Xyron Creative Station

Image coloured with Copic Markers:

Elephant: W3, W2, W1, W0, R22, R20, B04, B02, B00, C1

Ribbon and Flower: RV14, RV13, RV10, Y17, Y08

Leaves and Stem: YG67, YG65, YG61, G07

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Have A Beary Special Day!

Jun12

Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a birthday card that I made with Dreamerland Crafts stamp called With My Love – D19024. This little bear is on his way to wish someone a “Beary Good Birthday”!

 

To make this card I used a base card of 4.25″ x 5.5″. I stamped the image onto Copic Marker X-Press It Blending Card using Memento – Tuxedo Black ink and my MISTI. I coloured in the image and background with Copic markers and then used my Brother Scan and Cut to cut around it.

I cut out at rectangle 4.25″ x 5.5″ from Hammermill – Premium Colour 100 lb. paper and then I used various dies and Tim Holtz inks to create the background. I have listed them below. I had die cut templates using the dies which makes it really easy to create the backgrounds.

I stamped the sentiment from Jaded Blossom – Forest Friends using Versa Fine – Onyx Black ink and my MISTI onto some Turquoise Cardstock. I used Ranger – Clear Super Fine Detail embossing powder and then heat embossed the powder with Marvy Uchida – Embossing Heat Tool. Next, I edged around the background sentiment outer edges with Tim Holtz Distress Ink – Peacock Feathers. I went around the main image outline with Copic Markers – B000 and YG03. Then, I popped up the image with 3M VHB – 2 sided tape and added in some balloons which I die-cut using Your Next Stamp – Mini Balloon Trio Die Set and drew little strings from them.

Card Recipe:

Stamp:  With My Love – D19024 (Dreamerland Crafts)

Sentiment: Jaded Blossom – Forest Friends

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Mermaid Lagoon, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Inks – Peeled Paint, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Inks – Peacock Feathers

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Crafts – Sparkling Stickers – 02-3068629, Hammermill – Premium Colour 100 lb.

Die Cuts: Your Next Stamp – Mini Balloon Trio Die Set (YNSD241), Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie, Lawn Fawn – Grassy Hillside Borders

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Bear: E33, E31, E30, E29, E27, E25, E23, R22, R20

Balloon: R59, R37, R35, R24

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Gone Fishing – Father’s Day

Jun19

Welcome One Crazy Stamper Fans!

It’s Wednesday, and I’m back to share a second Father’s Day card this week that I made for my dad using Bear (High Hopes Rubber Stamps), Bait Shop (High Hopes Rubber Stamps) and Bob Hooked a Big One (High Hopes Rubber Stamps). My dad is an avid Fisherman and from the time he retired years ago, there are very few weeks that go by without him fishing, including winter. LOL!

On the front of my card, I used Bob Hooked a Big One (High Hopes Rubber Stamps). I then fussy cut around the image and mounted it onto some green cardstock and used my Cricut Explore to cut out the lettering.

For the inside of the card, I wanted to try something different and decided to make a pop-up card which I did in several stages.

Stage 1: I cut some green cardstock 12 x 6″ and then mounted 6 x 6″ piece from 49 and Market Tattered Garden onto one half of it. Next, I scored the paper in half and used Stampendous – Pop-Up Stage Die set to cut 3 pop-up levels as seen in the image below. Then I cut just a little off of each side and mounted the die cut piece onto some brown cardstock, cut 12 x 6″. I then used some double-sided pop-up tape to mount the Bait Shop – Bait Shop (High Hopes Rubber Stamps) and some double-sided tape to mount the bear – Bear (High Hopes Rubber Stamps) as well.

Here is a close-up of the Bear and Bait Shop.

Stage 2: To create the scene of the bear going through the grass, I used Lawn Fawn – Grassy Hillside Borders. I cut several pieces in various greens and then measured the back pieces to the pop-up that I created earlier. Cutting them at .5 in., 1 in. and 1.5 in. in the centre to fit around the pop-up. I also used some double-sided tape to pop up a few of the die cuts.

Stage 3: Lastly, I typed up an old saying for dad’s on my computer, printed it out and die cut it using Your Next Stamp – Stitched Rectangle Die Set (YNSD214).

Here is how the inside looks all finished.

Card Recipe:

Stamps:  Bear (High Hopes Rubber Stamps), Bait Shop (High Hopes Rubber Stamps), Bob Hooked a Big One  (High Hopes Rubber Stamps)

Paper: 49 and Market Tattered Garden – 6 x 6 Collection Pack, Copic Marker X-Press It Blending Card, Brown Cardstock, Various Green Cardstocks, Fish Paper

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Peeled Paint

Die Cuts: Your Next Stamp – Stitched Rectangle Die Set (YNSD214), Stampendous – Pop-Up Stage Die set, Cricut Explore, Lawn Fawn – Grassy Hillside Borders

Miscellaneous Tools: Cuttlebug, MISTI – Most Incredible Stamping Tool

Coloured the image with Copic Markers: 

Bear: Spectrum Noir: EB6, EB4, EB3, Prismacolor Premier Pencils – PC947 Dark Umber, PC946 Dark Brown, PC945 Sienna Brown, PC941 Light Umber, PC935 Black, Copic R02, R20, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen

Bait Shop: E97, E95, E08

Grass: G28, G14, G07

Trees: G29, G99, G94, YG95

Shop: E97, E95, E08, E29, E25, E23, C5, C3, C1

Boat: E29, E25, E23

Skin: E21, E11, E04, E00, E000

Hair: N6, N4, N2

Hat: G99, G94, YG93, R27, R24, V04

Fish: YG03, YG01, Y04, BG11, G99, R22, R20

Water: B29, B26, B24, B23, B21, BG01, G12

Fishing Rod: E27, E25, E23, N4

Glasses: BG000, BG02

Fishing Lure: BG93, BG90

Background: B01

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

 

 

 

Fisherman:

 

Have a Honey of a Day!

Apr10

Welcome OCS Fans!

Today is Wednesday and I’m back to share this adorable little bear thoroughly enjoying his honey! The stamp I’m featuring today is called Favourite Honey Bear (High Hopes Rubber Stamps) and the sentiment is Honey of a Day (High Hopes Rubber Stamps)!

He’s having a “Honey of a Day” and I hope you do too!

Card Recipe:

Stamps: Favourite Honey Bear (High Hopes Rubber Stamps) – S500, Honey of a Day (High Hopes Rubber Stamps) – G061

Copic Markers:

Bear: E79, E37, E35, E33, E31, E53, E51, E50, R22, R20, R01

Honey and Jar: Y38, Y18, Y17, Y35, YR21, Y11, R27, RR4

Flowers: BV04, BV01, BV000, Y35, YR21, Y11, G17, G14, G07

Inks: Tim Holtz Ranger Distress Ink – Broken China, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Inks – Ground Espresso, Tim Holtz Distress Ink – Wild Honey, Memento – Tuxedo Black, Versamark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Die Cuts: Lawn Fawn – Grassy Hillside Borders, My Creative Time -Stitched Squares Inside and Out, My Creative Time – Scalloped Stitched Oval Dies

Background Paper: Bee Digital Paper – DigitalDesignsand Art, Pebbles – “Home Grown” 6 x 6 in. (15.2 cm x 15.2 cm), Momenta – Cardstock, Recollections – Brown

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.