Tag Archive | Tim Holtz Ranger Distress Ink – Broken China

Surfing Gabriel!!


It’s Wednesday, and this week, I made a masculine card using Surfing Gabriel – TT516 by High Hopes Rubber Stamps for the main image and No Waves – FR011 (High Hopes Rubber Stamps) for the sentiment. Gabriel is enjoying the waves and the bright skies. I can’t wait for the weather to warm up here so that I can start swimming again too!

To make my card this week, I die cut a square from Copic Marker X-Press It Blending Card using My Creative Time -Stitched Squares Inside and Out. A larger square was cut using Waffle Flower – Nesting Square dies and spare blue cardstock. The image and sentiment were both stamped using my MISTI and Memento – Tuxedo Black ink. I coloured in the image with Copic markers. Then, I created a mask and put it over top of the coloured image and added in my clouds using various Tim Holtz inks listed below and Avery Elle – Pierced Clouds Die (Used to create stencils). To create the spray on the waves, I mixed a little bit of FolkArt – Extreme Glitter Acrylic Paint and Delta Ceramcoat – White paint and applied it to the coloured image using a 1/4″ H.J. Domed Dry Stipple brush. For a little extra sparkle, I added some DecoArt Glamour Dust while the paint was still wet.

Brother Scan and Cut was used to die-cut around the sentiment. Edges were inked with Tim Holtz Distress Ink – Blueprint Sketch. A second circle was die cut using Lifestyle Crafts Cutting Dies – Nesting Circles out of aqua cardstock and inked with Tim Holtz Distress Inks – Peacock Feathers.

To assemble the card, I used Recollections – Winter 4.25″ x 5.5 for the base. Tim Holtz Distress Ink – Salty Ocean was used to ink around the edges of the card. The coloured image was glued to the larger square and the sentiment was glued to the larger circle. 3M VHB – 2 sided tape was attached to the backs of the larger circle and square and attached to the base card. To finish it off, YNS Gumdrops were added.

Card Recipe:

Stamp: Surfing Gabriel – TT516 (High Hopes Rubber Stamps)

Sentiment: No Waves – FR011 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Ranger Distress Ink – Broken China, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Inks – Peacock Feathers

Paper: Copic Marker X-Press It Blending Card, Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards), Aqua cardstock, Blue cardstock

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Waffle Flower – Nesting Square dies, Lifestyle Crafts Cutting Dies – Nesting Circles

Stencil: Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie (Used to create stencils)

Tools: MISTI – Most Incredible Stamping Tool, Picket Fence – Blending Brush, 1/4″ H.J. Domed Dry Stipple, YNS Gumdrops, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20 (Eyes: Sakura Glaze – Black, Gelly Roll Sakura #8 Pen)

Hair: E47, E44, E43, E40

Swim Trunks: B79, B69, B66, YG03, YG01

Surf Board: Y38, Y17, Y15, YR18, YR16, BG57, BG32, BG11

Water: BG70, B93, B91, B52, B41, B06, B02, B01, B000

Water Droplets: B06, B02, B00

Sentiment: B000

Foamy Water: FolkArt – Extreme Glitter Acrylic Paint, Delta Ceramcoat – White, DecoArt Glamour Dust

Check out some other fun new stamps from the vault for Boys and Men here:
THE VAULT IS OPEN! MEN & BOYS RELEASE Archives – High Hopes Rubber Stamps (highhopesstamps.com)

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Surfer Bob!!


It’s Wednesday, and this week, I made a masculine card using Surfer Bob – TT519 by High Hopes Rubber Stamps for the main image and Surf’s Up – FR009 (High Hopes Rubber Stamps) for the sentiment. Wild and crazy Bob has awesome balance on his surf board. We had the opportunity to see surfers in Hawaii riding the waves on one of our trips. It was amazing!!! I’ve never tried surfing before, but I would sure love to. It’s definitely on my bucket list. LOL!

To make my card this week, I used Hammermill – Premium Colour 100 lb. paper folded to 4.25″ x 5.5″ for the base. I cut Copic Marker X-Press It Blending Card to the same size as the base and stamped the image and sentiment using my MISTI and Memento – Tuxedo Black ink. I coloured in the image with Copic markers and created my own background.

To create the background, I first created a mask of Surfer Bob using Post-It Note paper and fussy cut around the image. Then I put it over top of the coloured image. Using a Picket Fence – Blending Brush and Lawn Fawn – Cloudy Stencil, I began the top of the sky with Tim Holtz Distress Ink – Salty Ocean. I did this for 2 rows and then switched to Tim Holtz Distress Inks – Tumbled Glass, followed by Tim Holtz Ranger Distress Ink – Broken China. The mask was removed and the water was created by just adding a mixture of strokes with the Copic colours listed below.

I added double-sided tape to the coloured image and attached it to the base. Then, I mixed a little bit of FolkArt – Extreme Glitter Acrylic Paint and Delta Ceramcoat – White paint. Using a 1/4″ H.J. Domed Dry Stipple brush, I created the water spray for the waves. For a little extra sparkle, I added some DecoArt Glamour Dust while the paint was still wet.

Card Recipe:

Stamp: Surfer Bob – TT519 (High Hopes Rubber Stamps)

Sentiment: Surf’s Up – FR009 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Ranger Distress Ink – Broken China

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Stencil: Lawn Fawn – Cloudy Stencil

Tools: MISTI – Most Incredible Stamping Tool, Picket Fence – Blending Brush, 1/4″ H.J. Domed Dry Stipple

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E47, E44, E43, E40

Swim Trunks: B69, B52, Y17, C01 for shading

Surf Board: Y17, Y15, YR18, YR16, YR14

Water: BG72, BG70, B93, B91, B52, B41, B06, B02, B01, B000, C0

Foamy Water: FolkArt – Extreme Glitter Acrylic Paint, Delta Ceramcoat – White, DecoArt Glamour Dust

Check out some other fun new stamps from the vault for Boys and Men here:
THE VAULT IS OPEN! MEN & BOYS RELEASE Archives – High Hopes Rubber Stamps (highhopesstamps.com)

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Sweets for my Sooeet!!!


Valentine’s Day Is Almost Here!!! Who Wants Chocolate???

It’s Wednesday, and since Valentine’s Day is almost here, I thought I’d share this adorable little piggy called  Sow Soo-Eet Piggy (S091) from High Hopes Rubber Stamps! He sure does love his chocolate and so do I. LOL! I’m a choc-o-holic and so is my husband! I can give up many things, but not my chocolate. No way! LOL! And the sentiment Sweets for my Sooeet (G197) by High Hopes Rubber Stamps is the perfect fit for this card.

I decided to keep the card simple this week. I started off with a base of 5.5″ x 5.5″. I used double side tape and added the pretty heart ribbon to both the top and bottom of the card.

The die cuts for the main image are both from Craftin Desert Diva’s – Fancy Frames. I edged around the large die cut with Tim Holtz Distress Ink – Aged Mahagony to deepen the red. It was then attached to the card using 2 sided tape.

The main image was stamped onto Copic Marker X-Press It Blending Card and then coloured in with Copic Markers. I left the die cut metal frame on while I coloured the image. Once, the coloured image was done, I was ready to add some clouds. To do this, I stamped the image again onto some Post-It paper and then cut it out to create a masked image. I layered this on top of the pig and Valentine’s boxes and then created the clouds in the background using various blues from Tim Holtz Ranger Distress Ink and a stencil that I created using Avery Elle – D-05-01 PiercedCloudsDie.

Lastly, I stamped the sentiment onto white card stock. I die cut the frame for the sentiment with Craftin Desert Diva’s – Flag Banner Dies out of red cardstock. Then I used the same red cardstock, which I had just cut the banner out of to use as a stencil to trace around my sentiment.  I then used the trace marks as a guide to cut the sentiment out, moving just slightly inwards from my tracing to create the inner banner. This allowed me to have a nice red frame around the sentiment.

To finish the card I popped up the coloured image and sentiment with 3M VHB – 2 sided tape and added a couple of hearts.

Card Recipe:

Stamp: Sow Soo-Eet Piggy (S091) (High Hopes Rubber Stamps)

Sentiment: Sweets for my Sooeet (G197) (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Ranger Distress Ink – Broken China, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Distress Ink – Aged Mahagony

Paper: Copic Marker X-Press It Blending Card, Red and White Cardstock

Die Cuts: Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie, Craftin Desert Diva’s Fancy Frames, Craftin Desert Diva’s – Flag Banner Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug

Miscellaneous: Kraftin Kimmie – Heart Krafty Dots, American Crafts Premium Ribbon

Image coloured with Copic Markers:

Pig: R22, R20, R000, R00, E93, E44, E43, E41, E04, E37, E35, E34

Shirt: B18, B16, B14, B12, R29, R27, R24

Valentine boxes: R29, R27, R24, R22, R17, R14, C1, C0

Chocolate Wrappers: E37, E34, E29, E25, E23

Ground: E99, E97, E33, E31, E30

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Have Your Elf A Merry Little Christmas!


Welcome One Crazy Stamper Fans!

It’s Wednesday, and this month at One Crazy Stamper we are celebrating Christmas in July with High Hopes Rubber Stamps.  I used Elvin Eldar (High Hopes Rubber Stamps) for my main image and Have Your Elf Day (High Hopes Rubber Stamps) for the sentiment on the inside of the card. Hope you have all been good so far this year as I can see that Elvin is busy making up his list!!!

Inside of the card:

Card Recipe:

Stamp: Elvin Eldar  (High Hopes Rubber Stamps)

Sentiment: Have Your Elf Day (High Hopes Rubber Stamps)

Paper: Copic Marker X-Press It Blending Card, Recollections Christmas Ink Jet Printable Glitter Paper, Crafts – Glitter Cardstock 02-3068425

Die Cut: Poppy Stamps – Pinpoint Snowflake Sidekick Frame and Stencil

Ink: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Ranger Distress Ink – Broken China

Miscellaneous: Crafts – Rhinestone Stickers – 02-3039148, Crafts – Rhinestone Stickers – 02-3048783, Darice – Finishing Accents Rhinestone Stickers – Wntr Wond FlkDarice – Finishing Accents Rhinestone Stickers – Wntr Wond Flk, Recollections Washi Tape, MISTI – Most Incredible Stamping Tool, Cuttlebug

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20, Gelly Roll Sakura #5 Pen

Hair: E29, E25, E21

Hat: R59 R39, R29, R27, R24,

Outfit: E15, Y28, Y17, YR24, G28, YG97, YG67, YG63, R59 R39, R29, R27, R24

Feather: BG49, BG45, B01, Gelly Roll Sakura #5 Pen

List: BG57, BG49, BG45, B01

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

 

Have a Honey of a Day!


Welcome OCS Fans!

Today is Wednesday and I’m back to share this adorable little bear thoroughly enjoying his honey! The stamp I’m featuring today is called Favourite Honey Bear (High Hopes Rubber Stamps) and the sentiment is Honey of a Day (High Hopes Rubber Stamps)!

He’s having a “Honey of a Day” and I hope you do too!

Card Recipe:

Stamps: Favourite Honey Bear (High Hopes Rubber Stamps) – S500, Honey of a Day (High Hopes Rubber Stamps) – G061

Copic Markers:

Bear: E79, E37, E35, E33, E31, E53, E51, E50, R22, R20, R01

Honey and Jar: Y38, Y18, Y17, Y35, YR21, Y11, R27, RR4

Flowers: BV04, BV01, BV000, Y35, YR21, Y11, G17, G14, G07

Inks: Tim Holtz Ranger Distress Ink – Broken China, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Inks – Ground Espresso, Tim Holtz Distress Ink – Wild Honey, Memento – Tuxedo Black, Versamark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Die Cuts: Lawn Fawn – Grassy Hillside Borders, My Creative Time -Stitched Squares Inside and Out, My Creative Time – Scalloped Stitched Oval Dies

Background Paper: Bee Digital Paper – DigitalDesignsand Art, Pebbles – “Home Grown” 6 x 6 in. (15.2 cm x 15.2 cm), Momenta – Cardstock, Recollections – Brown

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

 

 

 

Happy Birthday – Golfer


Hi There,

Sharing a Birthday Card that I made using HighHopes Stamp – Retired Raymond R204.

Here is a close up:

GolferBD-Front

 

Clouds – Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie – Cut out clouds using the die and then used that as a stencil for the clouds.

Sky- Tim Holtz Ranger Distress Ink – Broken China

Frame: Craftin Desert Diva’s Fancy Frames

Ground: Lawn Cuts – Simple Stitched Hillside Borders – Lawn Fawn

Sentiment: Supersized Birthday Greetings – Jaded Blossom, Top Boss Clear Embossing Ink and Ranger Embossing Powder White – Extra Fine Detail.

Golfer

Skin: FS1, FS2, FS4, EB1, CR4 (Cheeks)

Hair: BG1, BG2, BG4

Club: IG1, IG2, IG4

Hat ,Shirt and Shoes: TN7, TN8, EB8

Hope you like it!

Added into http://onecrazystampercom.blogspot.ca/2016/04/april-challenge-anything-goes.html.