Tag Archive | Hearts

Polar Friends!!!

Oct27

It’s Wednesday, and this week, I made a Christmas card using Polar Friends – TT058 by High Hopes Rubber Stamps for the main image and All Hearts – HDG004 (High Hopes Rubber Stamps) for the sentiment. Sharing Christmas with loved ones is always something to look forward to.

Using My Creative Time – Rectangle Frame Dies and my Cuttlebug, I die cut a 5.25″ x 4″ rectangle from Copic Marker X-Press It Blending Card paper. With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto it. I coloured in the image with Copic markers and then added some snow to the sky using a Gelly Roll Sakura #8 Pen and Sharpie Water Based Paint – White – Extra Fine Point. Stickles – Diamond was added to the ice cubes and Wink of Stella – Clear was applied to the candy cane. Stickles – Star Dust was added to all of the snow. This was then set aside to dry.

Once everything was dry, I popped up the image onto Hammermill – Premium Colour 100 lb. paper cut and folded to 5.5″ x 4.25″ with U-Line double-sided tape. I stamped out the sentiment onto Copic Marker X-Press It Blending Card and coloured in the hearts with Copics and tinted the white paper with Lawn Fawn – Peacock ink. To finish off the card, I popped this up with 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Polar Friends – TT058 (High Hopes Rubber Stamps)

Sentiment: All Hearts – HDG004 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Lawn Fawn – Peacock Ink

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: My Creative Time – Rectangle Frame Dies

Stickles: Star Dust, Diamond

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Gelly Roll Sakura #8 Pen, Sharpie Water Based Paint – White – Extra Fine Point, Wink of Stella – Clear, U-Line double-sided tape, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Polar Bear: B60, BV23, BV20, C1, C00, R30, R20, R02, Colorless Blender

Penguin: W9, W7, W5, W3, W00, E15, YR14, Y17, Y11, R11, RV00, E43, E42, E41, E40

Penguin Scarf and Hat: BG72, BG57, BG05, BG11, BG10, BG000, BG0000

Bear Scarf: RV66, RV63, RV55, BG09, BG07, BG02, BG01, B00, B000, B0000

Ice: B60, B000, B0000

Sky: B99, B97, B95, B93, B45, B41, BG45, BG11, BG10, BV25, BV23, BV20, BV04, V04, V01, YG11, RV04, RV63

Snow: BV23, BV20, Colorless Blender, Stickles – Star Dust

Soda: RV66, RV63, RV55, RV52

Candy Cane and Hearts: R59, R37, R35

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Not Horsin’ Round

Feb3

It’s Wednesday, and this week, I’m sharing another Valentine’s card I made using High Hopes Rubber Stamps Horsin’ Around Horsey – P130. This little horse and his little friend are trotting by to wish you a Happy Valentine’s Day.

To make my CAS card today, I used The Paper Studio – Primary Base Colours 4.25″ x 5.5″. I die cut the 2 background hearts papers from Martha Stewart Crafts – Enchanted Woodland, using my Cuttlebug and My Creative Time – Rectangle Frame Dies. I die cut Copic Marker X-Press It Blending Card using My Creative Time – Scalloped Stitched Oval Dies. The image was stamped onto the die cut using my Misti and Memento – Tuxedo Black ink. I coloured in the image using Copic Markers. Then I used Tim Holtz Distress Inks – Festive Berries to ink around the edges of all of the die cuts.

To assemble the card, double-sided tape was used to adhere the first layer directly to the card base. 3M VHB – 2 sided tape was added to the backs of the coloured image and second layer of pattened paper and then they were added to the base. To complete the card, I added 3 hearts from Buttons Galore & More – Heartfelt Shimmerz Embellishments.

Card Recipe:

Stamp:  Horsin’ Around Horsey – P130 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Festive Berries

Paper: Copic Marker X-Press It Blending Card, Martha Stewart Crafts – Enchanted Woodland 12″ x 12″, The Paper Studio – Primary Base Colours 4.25″ x 5.5″

Die Cuts: My Creative Time – Scalloped Stitched Oval Dies, My Creative Time – Rectangle Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Buttons Galore & More – Heartfelt Shimmerz Embellishments

Images coloured with Copic Markers:

Horse: E37, E35, E33, E31, T6, T4, T2, R81

Mouse: W2, R81

Grass: YG17, YG13, YG03, YG01

Flower and Stem: G07, G03, RV06, RV04, Y15

Hearts: R39, R37, R35

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Sweets for my Sooeet!!!

Jan29

Valentine’s Day Is Almost Here!!! Who Wants Chocolate???

It’s Wednesday, and since Valentine’s Day is almost here, I thought I’d share this adorable little piggy called  Sow Soo-Eet Piggy (S091) from High Hopes Rubber Stamps! He sure does love his chocolate and so do I. LOL! I’m a choc-o-holic and so is my husband! I can give up many things, but not my chocolate. No way! LOL! And the sentiment Sweets for my Sooeet (G197) by High Hopes Rubber Stamps is the perfect fit for this card.

I decided to keep the card simple this week. I started off with a base of 5.5″ x 5.5″. I used double side tape and added the pretty heart ribbon to both the top and bottom of the card.

The die cuts for the main image are both from Craftin Desert Diva’s – Fancy Frames. I edged around the large die cut with Tim Holtz Distress Ink – Aged Mahagony to deepen the red. It was then attached to the card using 2 sided tape.

The main image was stamped onto Copic Marker X-Press It Blending Card and then coloured in with Copic Markers. I left the die cut metal frame on while I coloured the image. Once, the coloured image was done, I was ready to add some clouds. To do this, I stamped the image again onto some Post-It paper and then cut it out to create a masked image. I layered this on top of the pig and Valentine’s boxes and then created the clouds in the background using various blues from Tim Holtz Ranger Distress Ink and a stencil that I created using Avery Elle – D-05-01 PiercedCloudsDie.

Lastly, I stamped the sentiment onto white card stock. I die cut the frame for the sentiment with Craftin Desert Diva’s – Flag Banner Dies out of red cardstock. Then I used the same red cardstock, which I had just cut the banner out of to use as a stencil to trace around my sentiment.  I then used the trace marks as a guide to cut the sentiment out, moving just slightly inwards from my tracing to create the inner banner. This allowed me to have a nice red frame around the sentiment.

To finish the card I popped up the coloured image and sentiment with 3M VHB – 2 sided tape and added a couple of hearts.

Card Recipe:

Stamp: Sow Soo-Eet Piggy (S091) (High Hopes Rubber Stamps)

Sentiment: Sweets for my Sooeet (G197) (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Ranger Distress Ink – Broken China, Tim Holtz Distress Inks – Tumbled Glass, Tim Holtz Distress Ink – Aged Mahagony

Paper: Copic Marker X-Press It Blending Card, Red and White Cardstock

Die Cuts: Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie, Craftin Desert Diva’s Fancy Frames, Craftin Desert Diva’s – Flag Banner Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug

Miscellaneous: Kraftin Kimmie – Heart Krafty Dots, American Crafts Premium Ribbon

Image coloured with Copic Markers:

Pig: R22, R20, R000, R00, E93, E44, E43, E41, E04, E37, E35, E34

Shirt: B18, B16, B14, B12, R29, R27, R24

Valentine boxes: R29, R27, R24, R22, R17, R14, C1, C0

Chocolate Wrappers: E37, E34, E29, E25, E23

Ground: E99, E97, E33, E31, E30

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Nuts About You!

Jan22

Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and this week at High Hopes Rubber Stamps love is in the air! LOL! This week, I used this adorable little elephant called  Peeking Ellie With Heart – P127 for the main image and Nuts About You – F128 for the sentiment!

The card base is 5-1/2″ x 4-1/4 inches on white cardstock. I stamped the image using Memento – Tuxedo Black ink and then coloured in the image with Copic markers. Then I fussy cut around the image only leaving a thin slice of white in a few areas. Where I had trimmed the paper closest to the image, I outlined it with black marker.

Next, after running scrap pieces of paper through my Xyron Create a Sticker, I die cut the heart border using Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted. I also used the same die cut to cut out the big heart. Then I taped the metal die cut and the paper down onto a piece of cardboard so that I could colour the big heart and still leave a white border. Once the heart was coloured, I covered “about you” with some Scotch Tape and then stamped “I’m nuts”. I repeated the process only this time, I covered “I’m nuts” with the Scotch Tape and then stamped “about you” below it. Of course, I removed the tape each time before stamping.

I cut out the red contrasting paper and patterned paper with Your Next Stamp – Stitched Rectangle Die Set (YNSD214).

Now it was time to put it all together. I mounted the red rectangle directly onto the base. I mounted the patterned rectangle onto some white cardstock and used my cutter to create a thin white border all the way around it. Then, I popped up the rectangle, Ellie and the big heart with 3M VHB – 2 sided tape.

Lastly, to finish it off, I added the border sticker to the bottom of the first rectangle and hearts that I created earlier.

Card Recipe:

Stamp: Peeking Ellie With Heart – P127 (High Hopes Rubber Stamps)

Sentiment: Nuts About You – F128 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, K&C Company – Kelly Panacci – KP Valentine – 30-599345, K&C Company – Kelly Panacci – KP Valentine – 30-599338

Die Cuts: Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted, Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Xyron Create a Sticker

Image coloured with Copic Markers:

Elephant: C5, C3, C2, C1, R30, R22, R20, R01, B00

Hearts: R29, R27, R24, R22

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.