Tag Archive | Bear

Buddy’s Surprize!!


It’s Wednesday, and this week, I made a birthday card using Buddy Bear’s Surprise – S193 (High Hopes Rubber Stamps) for the main image and Shhh Party! – H038 (High Hopes Rubber Stamps) for the sentiment. Buddy is not very good at keeping secrets though or spelling! LOL! He is however, ready to bring you presents and party on!

To make my card this week, I started off with a card base of 5.5″ x 4.25″.  I love this background party paper by Echo Park called “It’s Your Birthday”. I cut it the same size as the base card and then used 2-sided tape to attach it to the base. Then I inked around the entire outside edges of the card with Tim Holtz Distress Ink – Wilted Violet.

I used My Creative Time – Stitched Squares Inside and Out to cut some Copic Marker X-Press It Blending Card. Then I used my MISTI and Memento – Tuxedo Black Ink to stamp the image. I coloured in the main image with Copic markers. I stamped the sentiment onto some yellow cardstock with Memento – Tuxedo Black ink and then used Your Next Stamp – Stitched Rectangle Die Set to die cut it out. Next, I ran both my image and sentiment through the Xyron Creative Station to turn them both into stickers. I applied both of these to some Violet cardstock and trimmed a small border. Lastly, I popped up both the image and the sentiment using 3M VHB – 2 sided tape.

Card Recipe:

Stamp:  Buddy Bear’s Surprise – S193  (High Hopes Rubber Stamps)

Sentiment: Shhh Party! – H038 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Wilted Violet

Paper: Copic Marker X-Press It Blending Card, Echo Park – It’s Your Birthday (6″x6″ Double-Sided)

Die Cuts: My Creative Time – Stitched Squares Inside and Out, Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Xyron Creative Station

Image coloured with Copic Markers:

Bear: E29, E27, E25, E23, R22, R20, R00, R14

Banner and Bow: BG18, BG13, BG11, Y00

Hat: V09, V06, V04, Y19, Y11

Present: BV04, BV02, BV00, Y38, Y19, Y11, YR16, YR15

Flowers and Leaves: G07, YG13, RV22, RV23, RV21,

Grass: YG17, YG13, YG03, YG01

Sky: B01, B00, B000, B0000

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Have A Beary Special Day!


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a birthday card that I made with Dreamerland Crafts stamp called With My Love – D19024. This little bear is on his way to wish someone a “Beary Good Birthday”!

 

To make this card I used a base card of 4.25″ x 5.5″. I stamped the image onto Copic Marker X-Press It Blending Card using Memento – Tuxedo Black ink and my MISTI. I coloured in the image and background with Copic markers and then used my Brother Scan and Cut to cut around it.

I cut out at rectangle 4.25″ x 5.5″ from Hammermill – Premium Colour 100 lb. paper and then I used various dies and Tim Holtz inks to create the background. I have listed them below. I had die cut templates using the dies which makes it really easy to create the backgrounds.

I stamped the sentiment from Jaded Blossom – Forest Friends using Versa Fine – Onyx Black ink and my MISTI onto some Turquoise Cardstock. I used Ranger – Clear Super Fine Detail embossing powder and then heat embossed the powder with Marvy Uchida – Embossing Heat Tool. Next, I edged around the background sentiment outer edges with Tim Holtz Distress Ink – Peacock Feathers. I went around the main image outline with Copic Markers – B000 and YG03. Then, I popped up the image with 3M VHB – 2 sided tape and added in some balloons which I die-cut using Your Next Stamp – Mini Balloon Trio Die Set and drew little strings from them.

Card Recipe:

Stamp:  With My Love – D19024 (Dreamerland Crafts)

Sentiment: Jaded Blossom – Forest Friends

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Mermaid Lagoon, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Inks – Peeled Paint, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Inks – Peacock Feathers

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Crafts – Sparkling Stickers – 02-3068629, Hammermill – Premium Colour 100 lb.

Die Cuts: Your Next Stamp – Mini Balloon Trio Die Set (YNSD241), Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie, Lawn Fawn – Grassy Hillside Borders

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Bear: E33, E31, E30, E29, E27, E25, E23, R22, R20

Balloon: R59, R37, R35, R24

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Enjoy Your Special Day!


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a birthday card that I made using Dreamerland Crafts stamps called A Restful Afternoon – D19014 for the main image. For the sentiments I used a combination of Birthday 07 – DS17058 and Birthday 08 – DS17059. These 2 friends are sharing a nice peaceful afternoon in the sun just relaxing. What a wonderful way to spend a gorgeous day in the sun.

 

To make this card I used a base card of 4.25″ x 5.5″. I die cut the rectangle using Copic Marker X-Press It Blending Card using my Cuttlebug and Your Next Stamp – Stitched Rectangle Die Set. Then I stamped the image using Memento – Tuxedo Black ink and my MISTI. The grass border was stamped with Memento – New Sprout. I coloured in the image and background with Copic markers.

For the background paper, I used Recollections – Petite Floral and green cardstock. I stamped the sentiments using Versa Fine – Onyx Black ink and my MISTI. I used Ranger – Clear Super Fine Detail embossing powder and then heat embossed the powder with Marvy Uchida – Embossing Heat Tool. Next, I edged around all of the background pieces with Tim Holtz Distress Ink – Mowed Lawn. I layered the image directly onto the green cardstock. Then, I popped up the image with 3M VHB – 2 sided tape and added a few Kraftin’ Kimmie – Springy Dots.

Card Recipe:

Stamp and Sentiment:  A Restful Afternoon – D19014 (Dreamerland Crafts), Birthday 08 – DS17059 (Dreamerland Sentiments Clear Stamps), Birthday 07 – DS17058 (Dreamerland Sentiments Clear Stamps)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Memento – New Sprout, Tim Holtz Distress Ink – Mowed Lawn

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Recollections – Petite Floral (12 x 12 in – 30.4 x 30.4 cm), Green Cardstock

Die Cuts: Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape, Kraftin’ Kimmie – Springy Dots

Image coloured with Copic Markers:

Bear: E53, E51, E50, E29, E27, E25, E23, R22, R20

Pig:  E93, E44, E43, R22, R20, R00, R000

Lounge Chairs: BG18 BG15, BG13, BG11

Books: B05, B04, B02, V06, V04, V01, C1

Drinks and Table: YR09, YR07, YR04, Y08, Y06, Y02, B05, C3, C1, C0, Colorless Blender

Sky: B01, B00, B000

Grass: YG17, YG13, YG05, YG03

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Love Every Little Moment


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a card that I made using Mix and Match Clear Stamps (DC19095) (Dreamerland Crafts)!  Love the images for this stamp. There are so many different scenes that can be created. I chose to do a night scene with the 2 best friends sharing the serenity of the night sky.

To make this card, I first die cut some Bristol paper and then drew in the hills with light pencil and traced around the stamps to get the general idea of placement. I created a masked image of the bear and bunny using Inkadoo Stamping Mask Paper and Post-It Note for the hills and cut them both out. Next I erased all of the lines so that you could barely see them and stamped the bear and the bunny image directly onto the Bristol Paper. Next, I mounted the mask of the characters and hills that I had cut out previously over top of the stamped images so that they would be protected while I coloured in the sky.

To do the sky I used a mixture of Tim Holtz inks listed below and PrismaColor pencils. Then I blended all of the colours together using Gamsol and a blending paper stump. I repeated the process with the PrismaColor pencils several times.

Once the sky was completed, I removed the stencil for the grass and proceeded to colour it in using the same technique that I had used for the sky.

Lastly, I removed the mask for the bear and bunny and coloured them in. I added in some small trees using a Black Prismacolor pencil.

I popped my finished image, back into my MISTI again and stamped the sentiment using VersaMark. I also stamped in the stars in the sky and embossed everything with Ranger Embossing Powder White – Extra Fine Detail. I also used a brush and tapped some of the white embossing powder all over the sky. Then heated it with my Marvy Uchida – Embossing Heat Tool. Lastly, I stamped and embossed the seagulls using VersaFine – Onyx Black and Ranger – Clear Super Fine Detail embossing powder. I coloured them in using Black PrismaColor pencil and then added in some highlights on the wings.

I popped up the coloured image and blue cardstock with 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment: Mix and Match Clear Stamps (DC19095) (Dreamerland Crafts)

Inks: Versa Fine – Onyx Black, Versa Mark, (Sky Base): Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Ink – Chipped Sapphire, Tim Holtz Distress Ink – Black Soot

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder.

Paper: Inkadoo Stamping Mask Paper, Blue and Green – Recollections paper, Bristol Paper

Die Cuts:  My Creative Time -Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape

Image coloured with PrismaColor Pencils:

Sky:  Indigo Blue (PC901), Indanthrone Blue (PC208), Violet Blue (PC933), Denim Blue (PC1101), Black (PC935)

Grass: Dark Green (PC908), Peacock Green (PC907), Marine Green (PC988), Grass Green (909)

Bear: Dark Brown (PC946), Dark Umber (PC947), Chocolate (PC1082), Burnt Ochre (PC943), Sienna Brown (PC945)

Rabbit: 30% Warm Grey (PC1052), 20% Warm Grey (PC1051), 10% Warm Grey (PC1050)

Seagull Wings Highlight: White (PC938), Denim Blue (PC933)

All colours were blended with paper stump and Gamsol blending fluid.

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Walking in a Winter Wonderland


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a card with you that I made using DCS19089 – Mix and Match Clear Stamp  (Dreamerland Crafts Clear Stamps) for the main image and sentiment and 2018 Christmas Trees & Houses – M18312 (Dreamerland Crafts Clear Stamps) for the trees in the background! I thought this little bear was just so adorable, so I thought I would make him pulling his little forest friend on a little walk through the forest!

I used the centre die cut from Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background – CED3049 to cut out the area I wanted to stamp my image on. I used Copic Marker X-Press It Blending Card, Memento – Tuxedo Black ink and my MISTI to get a nice clean image. The first step was to stamp the bear, sled and bunny. Next I used Inkadoo Stamping Mask Paper and stamped the 3 images again. Next, I added the masked images over top of the images that were previously stamped on the base image.

The second step was to stamp in the trees. I wanted to give the impression that some trees were further back, so I inked the tree stamp with Memento – Bamboo Leaves and stamped once and then immediately again using the same stamp. I performed this several times across the background. Once all of the trees were in place, I removed the masking and was ready to colour in my images.

Before adding snow to the sky, I stamped on the sentiment using VersaMark ink and Ranger Embossing Powder White – Extra Fine Detail. Then I added in the snow flakes using Gelly Roll Sakura #8 Pen.

The colours used for each character and the trees are listed below. The final step for the main image was to add in some sparkle on the trees and snow on the ground. For the glitter on the trees I used Quickie Glue and DecoArt Glamour Dust. For the snow below the trees, sled and bear, I used VersaMark ink and WOW! Embossing Glitter – White Puff Twinkle and touches of Stickles – Diamond.

Lastly, I die cut the background frame using Recollections – Christmas Inkjet Printable Glitter Paper and Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background. I added glue to the back of the die cut and mounted it on top of Crafts Sparkling Stickers – 02-3068629. Then I popped up the main image in the centre using 3M VHB – 2 sided tape.

Card Recipe:

Stamps: 2018 Christmas Trees & Houses – M18312 (Dreamerland Crafts Clear Stamps), DCS19089 – Mix and Match Clear Stamp (Dreamerland Crafts Clear Stamps)

Sentiments: DCS19089 – Mix and Match Clear Stamp (Dreamerland Crafts Clear Stamps)

Inks: Memento – Tuxedo Black, Memento – Bamboo Leaves, Memento – Rich Cocoa, VersaMark ink

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, WOW! Embossing Glitter – White Puff Twinkle

Paper: Copic Marker X-Press It Blending Card, Crafts Sparkling Stickers – 02-3068629, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Die Cuts: Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background – CED3049,

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Inkadoo Stamping Mask Paper, Stickles – Diamond

Image coloured with Copic Markers:

Bear: E57, E55, E53, E39, E37, E35, E34, R59, R37, R35, Sakura Glaze – Black (Nose and Eyes), Gelly Roll Sakura #5 Pen

Bunny: E57, E55, E53, E51, R20, R00, Sakura Glaze – Black (Eyes), Gelly Roll Sakura #5 Pen

Sleigh: R59, R37, R35, C3, C2, C1, E39, E37, E35

Trees: BG96, YG67, YG17, G21, G20, G00, G0000

Background Sky: B99, B97, B95, B93, B91

 

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Happy Birthday Bear


Hi There Everyone!

Today I’m sharing a card that I made using the stamps and sentiments from YNS Honey Bear (Your Next Stamp)! I thought this little bear was super adorable and would make a great card for one my friends that loves honey!!!

 

For the honeycomb corner, I used some watercolour paper and a mixture of Tim Holtz inks. Then I used the Honeycomb Corner die cut to cut it out and again went over that area with a mixture of inks to create the honey colour effect.

Card Recipe:

Stamp and Sentiment:  YNS Honey Bear

Die Cuts:  Memory Box – Honeycomb Corner; Creative Expression Craft Dies by Sue Wilson – Double Pierced Squares

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Fossilized Amber, Tim Holtz Ranger Distress Oxide – Fossilized Amber, Tim Holtz Distress Inks – Wild Honey, Tim Holtz Distress Ink – Rusty Hinge, Versamark

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Embellishments: Buttons Galore & More – Spring Fling Collection – SF100 Busy Bees

Copic markers were used to colour in this image.

Paper: Copic Marker X-Press It Blending Card, Yellow Cardstock, Strathmore Bristol

Miscellaneous: Cuttlebug, MISTI – Most Incredible Stamping Tool

I was also so excited when I received the e-mail from Jackie letting me know that my card was accepted for the Creative Scrapbooker Magazine. It was my first time ever entering any of my cards so I thought it was awesome. It can be found on page 126 of the Summer 2019 magazine.

 

 

 

Also entered into https://craftymilka.blogspot.com/2019/05/to-bee-or-not-to-bee-blog-hop.html.

 

 

Beary Happy Birthday!


Welcome Dreamerland Crafts Fans!

Today I’m sharing a card that I made with this little bear serving up a nice big cake for a very special person.  I used Super Tall Cake Dreamerland Crafts Clear Stamps and Birthday Sentiments Set 002 Dreamerland Crafts Clear Stamps to create this card.

Card Recipe:

Stamp: Super Tall Cake Dreamerland Crafts Clear Stamps,  Birthday Sentiments Set 002 Dreamerland Crafts Clear Stamps

Paper: Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Copic Marker X-Press It Blending Card, Craft Glitter Cardstock – Green, Craft Sparkling Stickers – Hot Pink

Ink: Tim Holtz Distress Ink – Picked Raspberry, Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Fossilized Amber

Die Cuts: My Creative Time – Scalloped Stitched Oval Dies, Craftin Desert Diva’s “Banner Dies”, Craftin Desert Diva’s Party Dies, Your Next Stamp – Mini Balloon Trio Die Set (YNSD241)

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Copic Markers

Bear: E53, E51, E50, E29, E25, E23, E21, R20, R02, Eyes (Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Cake: E18, E17, E15, E13

Cake Topping, Bear Apron: RV19, RV09, RV04

Bunny: W4, W2, W0

Mitts, Cake Apron, Boots: BG07, BG05, BG02

Hat: N1, N0, Colourless Blender

Cart: W4, W2, W0, C6

Shadow: C3, C2, C0, Colourless Blender

Background: R83, R81, RV52