Tag Archive | Tim Holtz Distress Ink -Worn Lipstick

Dancing Gingerbread !

Dec20

Today I’m sharing an interactive Christmas card that I made using Spellbinders – Dancin’ Gingerbread – S5-609 and Dancin’ Christmas Sentiments – STP-216. I could play with this card all day watching them swinging them back and forth! LOL!

Love these fun dies and just had to try them out. Using the die cuts, I cut all of the body pieces for the Gingerbread man and woman using the dies and a Cuttlebug. Tim Holtz Distress Ink – Rusty Hinge was then applied all around the edges with a finger dauber. All of the reds were die cut using Recollections – Red cardstock and then inked around the edges with Tim Holtz Distress Ink – Aged Mahogony. Just to give the pieces a little depth. For the cheeks, I added a little bit of pink chalk to make them rosier. All of the sparkle white pieces were die cut using Lawn Fawn – Sparkle Cardstock in “Pixie Dust”. I really love the glitter of this paper. The scarf pattern pieces were die cut out of Hammermill – Premium Cardstock.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Recollections – Red cardstock was cut to the same size as the base. Next, I cut 2 pieces of Recollections – Holiday Basics paper to the size of 4-1/8″ x 7/8″ and applied these to the top and bottom of the card. The centre piece was cut to the size of 4.25″ x 3.5″ and then inked around the edges with a finger dauber and Tim Holtz Distress Ink – Worn Lipstick. All of the paper pieces were adhered to the base card using liquid glue.

The Gingerbread were assembled along with some small scraps used to create the cheeks and eyes. White Gelly Roll Sakura #10 Pen was applied to each of the eyes to give them a little more character. The swinging mechanism was applied to the backs of the Gingerbread and My Favourite Things – Spin & Slide Discs were attached to the card using liquid glue and double-sided tape.

Lastly, I stamped the sentiment onto Hammermill – Premium Cardstock with VersaMark ink and applied Ranger – Rich Red Embossing Powder to it. A Marvy Uchida – Embossing Heat Tool was applied to the powder to heat emboss it.  This was cut down to 3-1/8″ x .75″ and both sides were notched with scissors and Tim Holtz Distress Ink -Worn Lipstick was applied around the edges with a finger dauber. U-Line Double-Sided Foam Tape was applied to the sentiment and it was popped up on the card to complete it.

Card Recipe:

Stamp Sentiment: Spellbinders – Dancin’ Christmas Sentiments – STP-216

Inks: Tim Holtz Distress Ink – Rusty Hinge, Tim Holtz Distress Ink – Aged Mahogony, Tim Holtz Distress Ink -Worn Lipstick, VersaMark

Paper: Hammermill – Premium Cardstock 110 lb., Recollections – Holiday Basics (12″ x 12″), Crafter’s Companion – Snowflake Swirls (12″ x 12″), Recollections – Red cardstock, Recollections Kraft Cardstock, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″), scraps of pink and dark brown cardstock for cheeks, eyes and mouth

Die Cuts: Spellbinders – Dancin’ Gingerbread – S5-609

Embossing Powder: Ranger – Rich Red

Miscellaneous: U-Line Double-Sided Foam Tape, White Gelly Roll Sakura #10 Pen, My Favourite Things – Spin & Slide Discs, Marvy Uchida – Embossing Heat Tool

Hope you like it and have a great week!

It’s Always Cupcake Time!!!

Mar2

Today I am sharing a birthday card I made using Kraftin’ Kimmie Stamps – Birthday Lulu stamp and sentiment.

To make my cards this week, I began with a card base of Hammermill – Premium Cardstock 110 lb. cardstock, cut and scored to be 5.5″ x 4.25″.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card and the sentiment directly onto the base card using Versa Fine – Onyx Black ink. I embossed the sentiment with Ranger – Clear Super Fine Detail embossing powder and then heat embossed it with a Marvy Uchida – Embossing Heat Tool. I coloured in the image with Copic markers and then fussy cut all around it. Spectrum Noir – Sparkles – Crystal Clear was applied to the icing and dots on Lulu’s hat.

With a Cuttlebug and We R Memory Keepers – Quickutz Nesting Scallops, I die cut the smaller scallop circle out of Doodlebug Design Inc. – Made With Love paper (3.5″) and the larger scallop circle out of Doodlebug Design Inc. – Spring Solid Assortment cardstock (3-7/8″). Doodlebug Design Inc. – Made With Love cardstock was cut to the size of 4/3-8″ x 1″ and Doodlebug Design Inc. – Spring Solid Assortment cardstock was cut to the size of 4.5″ x 1-1/8″ for the rectangles. Tim Holtz Distress Ink – Worn Lipstick was used to ink around the edges of both scallops and the smaller rectangles.

The card was now ready to assemble. With liquid glue, I applied the smaller rectangles onto the large rectangles. Then using double-sided tape, I applied each of the rectangles to the base card. U-Line Double-Sided Foam Tape was applied to both scallop circles and the coloured image. All 3 were centred and popped up on top of each other to complete the card.

Card Recipe:

Stamp and Sentiment: Kraftin’ Kimmie Stamps – Birthday Lulu

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Worn Lipstick

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Doodlebug Design Inc. – Made With Love (6″ x 6″), Doodlebug Design Inc. – Spring Solid Assortment (12″ x 12″)

Die Cuts: We R Memory Keepers – Quickutz Nesting Scallops (15 Dies)

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Miscellaneous: MISTI – Most Incredible Stamping Tool, U-Line Double-Sided Foam Tape, Spectrum Noir – Sparkles – Crystal Clear, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R37, R30, R22, Sakura Glaze – Black (Eyes)

Hair: YR31, YR24, YR23, E99

Dress, Socks and Shoes: BG72, BG57, BG32, BG11, BG10, N7

Cupcake Wrapping: RV29, RV25, RV23, RV21

Cupcake Icing and Sprinkles: Y08, Y06, Y04, Y02, BG57, BG32, RV29, RV23, Spectrum Noir – Sparkles – Crystal Clear

Party Hat: RV29, RV25, RV23, RV21, BG57, Spectrum Noir – Sparkles – Crystal Clear

Hope you like it and have a fantastic week!

Entered into: Kraftin’ Kimmie – Bday Krop Ch #1 – Birthday plus Dots!

Miss You!!

May9

Today, I’m sharing a slim-line card that I made using Dreamerland Crafts stamps called Meow Meow 04 – D20016 for the main image and for the sentiment Just A Note To Say – DCS17038 – Dreamerland Crafts. Love this new set and I as soon as I saw it, I knew I wanted to make a card to show how a lot of us are feeling right now during these Covid times missing family and friends.

To make this card I used a base card of 7″ x 8.25″ using Hammermill – Premium Colour 100 lb. cardstock. I scored it at 3.25″.  Next, using my Couture Creations – Go Power and Emboss and Whimsy Stamps – Slimline Marquee Die, I die cut Copic Marker X-Press It Blending Card.  Using my MISTI and Memento – Tuxedo Black ink, I stamped all of the images onto the shaped die cuts and coloured them in with Copic markers.

The frame die cut was coloured using Picket Fence Studio Blender Brush and Tim Holtz Distress Inks: Picked Raspberry, Spun Sugar and Worn Lipstick. The sentiments were stamped and embossed onto black cardstock using Versamark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat set using Marvy Uchida – Embossing Heat Tool. My cutter was used to cut the stamped sentiments into small strips. 3M VHB – 2 sided tape was applied to the back of each of the sentiments.

To assemble the card, I first turned the die cuts upside down and used a little bit of Scotch Tape on the back side to keep the inserts in place. Then, I applied double-sided tape across the entire back and attached it directly to the card base. I attached each of the sentiments and finished off the card with Crafts – Rhinestone Stickers.

Card Recipe:

Stamps: Meow Meow 04 – D20016 – Dreamerland Crafts

Sentiments: Just A Note To Say – DCS17038 – Dreamerland Crafts, Love and Cuddles – Penny Black

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Tim Holtz Distress Ink – Spun Sugar, Tim Holtz Distress Ink -Worn Lipstick, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: Whimsy Stamps – Slimline Marquee Die (WSD347)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Couture Creations – Go Power and Emboss, Picket Fence Studio Blender Brushes, Marvy Uchida – Embossing Heat Tool, Crafts – Rhinestone Stickers – 02-3048783

Image coloured with Copic Markers:

Cats: C7, C5, C3, R30, R22, R20, 100, YG23, YG17, G07 (Noses – Sakura Glaze – Black)

Bunny:  E35, E33, E31

Grass: YG17, YG13, YG03, YG01

Sky: B02, B01, B00, B000

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Never Grow Old!

May22

Welcome Back Dreamerland Craft Fans!

Today, I’m sharing an anniversary card that I made using Dreamerland Crafts stamps called We Will Never – D19077. My husband has always been my best friend and we are often told that we are still kids at heart. So, this sentiment and stamp were the perfect combination for us.

 

To make this card I used a base card of 4.25″ x 5.5″. I die cut a heart out of Copic Marker X-Press It Blending Card using my Cuttlebug and Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted. Then I stamped the image using Memento – Tuxedo Black ink and my MISTI. I coloured in the image and background of the heart with Copic markers.

For the background, I used Stampin’ Up! – Have a Cuppa paper. I stamped the sentiment using Versa Fine – Onyx Black ink and my MISTI. I used Ranger – Clear Super Fine Detail embossing powder and then heat embossed the powder with Marvy Uchida – Embossing Heat Tool. I then coloured the top half with Tim Holtz Distress Ink – Worn Lipstick and Tim Holtz Distress Ink – Evergreen Bough. Next, I edged around all of the background pieces with Tim Holtz Distress Ink – Evergreen Bough. I layered the centre background cardstock onto the base first and then the next 2 layers directly on top of it. Lastly, I popped up the image with 3M VHB – 2 sided tape and added a few pop dots from Kraftin’ Kimmie.

Card Recipe:

Stamp and Sentiment:  We Will Never – D19077 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Worn Lipstick, Tim Holtz Distress Ink – Evergreen Bough

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Stampin’ Up! – Have a Cuppa – 6″ x 6″

Die Cuts: Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape, Kraftin’ Kimmie – Rainy Day Dots, Kraftin’ Kimmie – Hearts Krafty Dots

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20, C3 (Glasses)

Hair:  E47, E44, E43, E15, Y38, Y21, YR23

Skirt and Pants: B26, B23, B21

Shirt and Vest: G46, G43, G40, E29, E27, E25, E23

Boots: E57, E55, E53, E51

Heart: BG57, BG45, BG34, R85, R83, R81, C3, C2, C1

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Dragon – Sick Day

Mar13

Welcome OCS Fans!

It’s Wednesday, and so I’m happy to be posting this adorable little dragon to help put a smile on your face! I decided to make an Easel Card this week. The dragon I am using is called “Seymore’s Sick Day” by High Hopes Rubber Stamps. It was stamped onto Copic Marker X-Press It Blending Card with Memento Tuxedo Black Ink and then coloured in with Copic Markers. I then, fussy cut around the entire image.

To do the background behind the dragon, I cut out some Bristol Paper using my Cuttlebug and Lawn Fawn – Zig Zag Rectangle Stackables. Then used Spectrum Noir Aqua Markers to create the ground and shadow beneath the dragon. The clouds were done using Tim Holtz Distress Ink – Salty Ocean and I had created a stencil from Avery Elle – Custom Steel Dies – Pierced Clouds Die. Finally, I ran my little dragon through the Xyron machine and layered it on top of the background that I had created.

Close up of the Dragon:

For the sentiment I used “Tail Not Waggin / Get Well Soon” by High Hopes Rubber Stamps. I stamped the sentiment using VersaFine – Onyx Black and then embossed with Ranger – Clear Super Fine Detail Embossing Powder.

 

I completed card by using the Zig Zag dies again to cut out  a border around the coloured image and sentiment. Sentiment was popped up with some pop-up squares. Around the background papers, frames and sentiment I used Tim Holtz Distress Ink – Wilted Violet.

Background Paper, Recollections – Petite Floral – 12 x 12″ (30.4 x 30.4 cm) and some flowers from my collection were then used to complete the card.

To make the Easel Card I just took a 5.5″ x 12″ piece of white cardstock and then scored at 6″ and then on one of the 6″ portions at 3″. This allows the card to lay flat when mailing.

Card Recipe:

Stamps: High Hopes Tail Not Waggin / Get Well Soon K044; High Hopes Seymore’s Sick Day T058

Dragon: YG01, YG03, YG13, YG17, Y15, Y17, Y18, V12, V04, V09

Hot Water Bottle: B32, B34, B37

Pill Bottle: E23, E25, C1, C2

Thermometer: C1, C2

Background: Ground: Spectrum Noir Aqua Markers – Terracotta, Sepia, Tan, Moss; Sky: Tim Holtz Distress Ink – Salty Ocean

Around card and borders: Tim Holtz Distress Ink – Wilted Violet

Background Paper: Recollections – Petite Floral – 12 x 12″ (30.4 x 30.4 cm)

Die Cuts: Lawn Fawn – Zig Zag Rectangle Stackables; Avery Elle – Custom Steel Dies – Pierced Clouds

Added Tools: Cuttlebug, MISTI, Xyron, Tape Gun, Glue DOTS, Forever In Time – Pop-Dot Value Pack

Be sure to visit the One Crazy Stamper blog for your daily inspiration, and check out our Facebook page, Pinterest and Twitter as well!

 

Sympathy Card

Jun6

Hi There,

Sharing a sympathy card that I made using My Creative Time – My Thoughts Are With You Stamp and My Creative Time – Just Because.

Sympathy-Card---MCT

Here is a close up:

Sympathy-CardCup---MCT

To make the flowers in the vase, I stamped the image on some regular paper and then cut out the images to create a mask. Then I stamped the foreground flowers first on watercolour paper with Jet Black – Stazon Ink. Next I put the mask over them and then stamped the background flowers.

Coloured in the flowers with Tim Holtz Distress Ranger Ink and watercolour brush.

Purple flowers: Dusty Concord, Shaded Lilac and Wilted Violet

Pink Flowers: Worn Lipstick, Festive Berries and Candied Apple

Leaves: Mowed Lawn

Water in Vase: Salty Ocean

Stems: Zig Marker – Clover

Flower Centers: Stampin Up – More Mustard

Die cut the frame with My Creative Time – Stitched Squares Inside and Out. Outlined cut with Sharpie – Gold Medium Point – Water Based Paint.

Sentiment – My Creative Time – Inspire Die Cut and My Thoughts Are With You Stamp.

Background paper – Recollection Signature – Kaitlin.

Right side border – Martha Stuart Doily Lace punch