Tag Archive | Tim Holtz Distress Ink – Picked Raspberry

Ex-Cuse Me!!


Sharing a birthday card I made for my sister-in-law this year using C.C. DesignsRoberto’s Rascals – Grouchy Pets and Roberto’s Rascals – Cutie Cats. Her name is Kitty and I always try to find fun images with cats to make her card. LOL!

To make the card, I began with the base of 3.5″ x 8.5″ Hammermill – Premium Colour cardstock. I also die cut the Hammermill – Premium Colour cardstock with the Whimsy Stamps – Slimline Marquee Die and my Cuttlebug. Using multiple Picket Fence – Blending Brushes and Tim Holtz Distress Inks listed below, I created my own background. Using the window pieces from the die cut, I traced around them onto Doodlebug – hey cupcake (6″x6″) paper and fussy cut around them. I applied some glue along the edges and attached them to the back of the panel.  Then I applied double-sided tape to the backing and attached this to the base.

Using my MISTI and Memento – Tuxedo Black ink, the images were stamped onto Copic Marker X-Press It Blending Cardstock and coloured in with Copic Markers. Once everything was coloured, I fussy cut around each of them. The sentiments were stamped onto Recollections – Black cardstock with Versamark ink and then heat embossed with Ranger Embossing Powder White – Extra Fine Detail and my Marvy Uchida – Embossing Heat Tool. Using my cutter, I cut around each of the sentiments. I added double-sided tape to the back of the images and sentiments and popped them all up onto the base card. Finally, I added some Kraftin’ Kimmie Pop Dots.

Inside of the card: 

For the inside of the card, I used my large MISTI and Memento – Tuxedo Black ink to stamp the sentiments from Art Impressions Glamour Pop-Ups – 5355 and Purrrfect Sentiments – HoneyBee Stamps. I ran the little kitty from the Roberto’s Rascals – Cutie Cats – C.C. Designs set that I had coloured earlier through my Xyron Create a Sticker and attached it directly to the card to finish everything off.

Thankfully, she loved her card and I hope you do too!

Card Recipe:

Stamp and Sentiments: Roberto’s Rascals – Grouchy Pets – C.C. Designs, Roberto’s Rascals – Cutie Cats – C.C. Designs

Sentiments: Purrrfect Sentiments – HoneyBee Stamps, Dance It Out Set – Art Impressions

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink: Picked Raspberry, Carved Pumpkin, Mustard Seed, Peacock Feathers

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Doodlebug – hey cupcake (6″x6″) paper pad

Die Cut: Whimsy Stamps – Slimline Marquee Die (WSD347)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen, Kraftin’ Kimmie – Seashore Dots, Xyron Create a Sticker, Sakura Glaze – Black

Image coloured with Copic Markers:

Cats: N9, N7, N5, N3, RV11, R20, G14, YG23, YG11 (Gelly Roll Sakura #10 Pen, Sakura Glaze – Black)

Hope you like it and have a great week!

Beautiful Day!!


It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Winter Kitty – SDG006  for the main image and Beautiful Day – FDG013 for the sentiment. We just had a major snowfall over the last few days and this little kitty is all bundled up and ready to play!

Growing up we had a lot of snow during the winter and couldn’t wait to put on our mitts and snow boots and go out to play. We had huge snow banks in the schoolyard across the street and would toboggan down them or just slide down in our snow suits! LOL! It was sooooo much fun! Sometimes we even made big snow forts in the backyard with tables and chairs made out of ice and snow. We hardly spent anytime indoors and didn’t usually go back into the house until we had to or we were turning blue because it was so cold out, but even then we still wanted to continue playing outdoors. LOL!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I used Scrapbook.com – Rainbow Smooth Cardstock for the main background paper. It was already the same size as the base, so no cutting had to be done. To get more use out of the same paper, I had cut the oval frame using my Cuttlebug and Hero Arts – Infinity Die Ovals first. Then, I placed the Rainbow cardstock onto the card base using double-sized tape. I die cut the square background using My Creative Time -Stitched Squares Inside and Out and Pebbles – Winter Wonderland paper and the rectangle to the size of 4″ x 4″. The rectangle was cut from from the same paper pack to the size of 1.25″ x 4″. I inked around the edges of both shapes with a sponge dauber and Tim Holtz Distress Ink – Evergreen Bough. Using double-sided tape, I placed both shapes over the pink background and hid where I cut the oval with the square. I cut out a smaller oval using the same Hero Arts – Infinity Die Ovals and Copic Marker X-Press It Blending Card. I also cut out a 1.5″ circle using a circle punch. Lastly, I die cut the scalloped circle using WeR Memory Keepers – Quickutz Nesting Scallops dies and Hot Buy Craft Smart – Holiday Glitz Glitter Paper.

With my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the Copic Marker X-Press It Blending Card cardstock oval and the sentiment onto the circle. I coloured in the image with Copic markers and then added some Ranger – Emboss It Pen Clear to the bottom of the oval and applied WOW! Sparkling Snow Embossing Glitter. I heat embossed this and added more embossing powder several times to create a thicker layer with my Marvy Uchida – Embossing Heat Tool. Then I added some Cosmic Shimmer Fluffy Stuff and heat embossed it as well to puff it up. Gelly Roll Sakura #10 Pen was used to create the snow in the sky. Sakura Glaze – Black and Gelly Roll Sakura #5 Pen were used on the eyes and nose of the cat.

I inked around the edges of the large pink oval and the circle with Tim Holtz Distress Ink – Picked Raspberry. I applied the coloured image directly to the pink oval and the sentiment circle to the scalloped circle using some liquid glue. Both shapes were then popped up onto the card using U-Line double-sided tape. To completed the card and add in some extra sparkle, I applied some YNS Gumdrops – Winter Wonderland to the background patterned paper.

Card Recipe:

Stamp: Winter Kitty – SDG006 (High Hopes Rubber Stamps)

Sentiment: Beautiful Day – FDG013 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Tim Holtz Distress Ink – Picked Raspberry, Ranger – Emboss It Pen Clear

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Scrapbook.com – Rainbow Smooth Cardstock (4.25″ x 5.5″), Pebbles Winter Wonderland 6″ x 6″, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: My Creative Time -Stitched Squares Inside and Out, Hero Arts – Infinity Die Ovals, WeR Memory Keepers – Quickutz Nesting Scallops, 1.5″ Circle Punch

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black, Cuttlebug, YNS Gumdrops – Winter Wonderland

Image coloured with Copic Markers:

Kitty: N7, N5, N3, R02, R00, RV66, RV63, RV55 (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen)

Sky: B05, B04, B02, Gelly Roll Sakura #10 Pen

Snow: WOW! Sparkling Snow Embossing Glitter, Cosmic Shimmer Fluffy Stuff, Marvy Uchida – Embossing Heat Tool

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Hello Winter!!!


It’s Wednesday, and this week, I made a Christmas CAS card using Penguin Tag – SDG003 by High Hopes Rubber Stamps for the main image and Hello Winter – FDG007 (High Hopes Rubber Stamps) for the sentiment. Winter is now here and these little penguins couldn’t wait to start enjoying it.

I’d like to take this time to also wish everyone a Very Merry Christmas and A Happy New Year!

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cardstock, cut and scored to be 5.5″ x 4.25″.  I cut the background paper from Craft Consortium – Polar Playtime to be the same and attached it directly to the base. Tim Holtz Distress Ink – Picked Raspberry was used to ink around the outside of the card. Using my MISTI and Memento – Tuxedo Black ink, I stamped the image and sentiment onto Copic Marker X-Press It Blending Card cardstock. I coloured in the image with Copic markers and the little berries with a Pental Sunburst Metalic Med Gel Pen – Gold. I used Sakura Glaze – Black and Gelly Roll Sakura #10 Pen was used for the eyes and little dots on the hat.) Clear – Wink of Stella was applied over top of the candy canes and candy cane border. Once this was all complete, I fussy cut around the image and then coloured in around it with Copic B01. I ran the image through my Xyron Creative Station and attached it to some Hot Pink cardstock. Once again, I fussy cut around the image and then popped it up on to the card using U-Line double-sided tape. Lastly, Gelly Roll Sparkle Pen was applied to the little blue snowflakes and dots on the background paper to finish off the card.

Card Recipe:

Stamp: Penguin Tag – SDG003 (High Hopes Rubber Stamps)

Sentiment: Hello Winter – FDG007 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Craft Consortium – Polar Playtime (6″ x 6″), Hot Pink cardstock

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Gelly Roll Sakura #10 Pen, Pental Sunburst Metalic Med Gel Pen – Gold, Sakura Glaze – Black, Gelly Roll Sparkle Pen, Clear – Wink of Stella, Xyron Creative Station

Image coloured with Copic Markers:

Penguin: W9, W7, W5, W3, W0, E15, YR14, Y17, Y11, R30, E42, E41, E40 (Eyes – Sakura Glaze – Black, Gelly Roll Sakura #10 Pen)

Hat, Pom Pom and Bow Tie: RV14, RV13, RV11, RV10, G14, YG23, YG11, Gelly Roll Sakura #10 Pen

Holly and Leaves: G14, YG23, YG11, R59, R37, R35

Candy Cane and Border: C1, C0, R59, R37, R35, Colorless Blender, Clear – Wink of Stella

Berries: Pental Sunburst Metalic Med Gel Pen – Gold

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Work Hard, Dream Big!!


Check out the sale for KLM Digital Designs Clear Stamps
going on now while supplies last! Just click on the link provided or go here: https://klmdigitaldesign.com.

Today, I’m sharing a card I made using KLM Digital Designs –  Office Gnome from the new November release. This image also comes with 2 more sayings: “You got this!” and “Strive for progress, not perfection”. This card would also be great for someone you know just starting a new position or a recent graduate as well.

To make the card, I started with a base created with Hammermill – Premium Colour 100 lb. cardstock cut and folded to the size of 5.5″ x 4.25″. I taped off the top of the card with some Post-It Note tape and inserted the Heffy Doodle – Cityscape stencil over top of the bottom half of the card. I taped off the bottom of the stencil and the sides to keep it place. Using multiple Picket Fence – Blending Brushes, I added in the buildings using Memento – Gray Flannel, Memento – London Fog and Tim Holtz Distress Ink – Hickory Smoke. I removed the stencil and reapplied it over the card, this time using the stencil to cover the buildings. I re-applied the tape to the bottom of the stencil to keep it in place. Using stencils that I had previously created using Avery Elle – Pierced Clouds Die, I applied the clouds in using Tim Holtz Distress Ink – Fossilized Amber, Picked Raspberry and Salty Ocean with Picket Fence – Blending Brushes. I removed the stencil and turned it around. This time using Tim Holtz Distress Ink – Hickory Smoke to add in the windows on the buildings along with just a touch of Tim Holtz Distress Ink – Fossilized Amber. I moved the tape up to where the buildings ended on the bottom and once again placed it across the card. This time, I used Tim Holtz Distress Ink – Black Soot. The background was now complete.

The image and sentiment were both imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I used my Brother Scan and Cut to die cut the image with a small margin around it. This was coloured in with Copic markers. My Cuttlebug, My Creative Time – Rectangle Frame Dies and My Creative Time – Rectangle Frame Layers were used to die cut the sentiment and black cardstock. U-Line double-sided tape was applied to the backs of the images and 2 die cuts to pop-up them all up onto the finished background to complete the card.

Card Recipe:

Stamp and Sentiment:  Office Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Memento – Gray Flannel, Memento – London Fog, Tim Holtz Distress Ink – Hickory Smoke, Fossilized Amber, Picked Raspberry, Salty Ocean, Black Soot

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers, Avery Elle – Pierced Clouds Die (D-05-01)

Stencil: Heffy Doodle – Cityscape

Miscellaneous: U-Line – 2 sided tape, Picket Fence – Blending Brushes, U-Line double-sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beard and Hair: E47, E44, E43, E41

Dress Shirt: B45, B39, B37, C1, C0, C00

Pants: T7, T5, T3

Hat: C9, C7, C5, C3

Boots: C9, C7, C5, C3, C0

Tie: R24, B37, C2

Brief Case: E29, E27, E25, E23, E21

Shadow: C2, C1, C0

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Miss You!!


Today, I’m sharing a slim-line card that I made using Dreamerland Crafts stamps called Meow Meow 04 – D20016 for the main image and for the sentiment Just A Note To Say – DCS17038Dreamerland Crafts. Love this new set and I as soon as I saw it, I knew I wanted to make a card to show how a lot of us are feeling right now during these Covid times missing family and friends.

To make this card I used a base card of 7″ x 8.25″ using Hammermill – Premium Colour 100 lb. cardstock. I scored it at 3.25″.  Next, using my Couture Creations – Go Power and Emboss and Whimsy Stamps – Slimline Marquee Die, I die cut Copic Marker X-Press It Blending Card.  Using my MISTI and Memento – Tuxedo Black ink, I stamped all of the images onto the shaped die cuts and coloured them in with Copic markers.

The frame die cut was coloured using Picket Fence Studio Blender Brush and Tim Holtz Distress Inks: Picked Raspberry, Spun Sugar and Worn Lipstick. The sentiments were stamped and embossed onto black cardstock using Versamark ink and Ranger Embossing Powder White – Extra Fine Detail. This was heat set using Marvy Uchida – Embossing Heat Tool. My cutter was used to cut the stamped sentiments into small strips. 3M VHB – 2 sided tape was applied to the back of each of the sentiments.

To assemble the card, I first turned the die cuts upside down and used a little bit of Scotch Tape on the back side to keep the inserts in place. Then, I applied double-sided tape across the entire back and attached it directly to the card base. I attached each of the sentiments and finished off the card with Crafts – Rhinestone Stickers.

Card Recipe:

Stamps: Meow Meow 04 – D20016 – Dreamerland Crafts

Sentiments: Just A Note To Say – DCS17038 – Dreamerland Crafts, Love and Cuddles – Penny Black

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Tim Holtz Distress Ink – Spun Sugar, Tim Holtz Distress Ink -Worn Lipstick, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cut: Whimsy Stamps – Slimline Marquee Die (WSD347)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Couture Creations – Go Power and Emboss, Picket Fence Studio Blender Brushes, Marvy Uchida – Embossing Heat Tool, Crafts – Rhinestone Stickers – 02-3048783

Image coloured with Copic Markers:

Cats: C7, C5, C3, R30, R22, R20, 100, YG23, YG17, G07 (Noses – Sakura Glaze – Black)

Bunny:  E35, E33, E31

Grass: YG17, YG13, YG03, YG01

Sky: B02, B01, B00, B000

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Birthday Presents and Cake!!


Sharing a birthday card that I made for a friend using a digital image from Polkadoodles called Cake Time Digi – Winnie Celebrations 2. I really love this awesome collection.

To make the card, I first imported the image and sentiment into Microsoft Word and then printed everything out onto Copic Marker X-Press It Blending Card using my HP Printer using High Quality Grayscale. I found this to be the best setting as it doesn’t smudge when you colour. Next, I used Gina Marie Designs – Loopy Oval dies to die cut the image out. The image was coloured in with Copic markers.

Using Hot Buy – Recollections – Jewel Tones – 5.5″ x 4.25″ cardstock as the base. I stamped the sentiment using Versa Fine – Onyx Black and Ranger – Clear Super Fine Detail embossing powder. Marvy Uchida – Embossing Heat Tool was used to heat the embossing powder. All of the edges of the card were inked with Tim Holtz Distress Ink – Picked Raspberry.

3M VHB – 2 sided tape was applied to the back of the die cut and attached directly to the base. Lastly to finish off the card, I added some Crafts – Rhinestone Stickers.

Card Recipe:

Stamp: Cake Time Digi – Winnie Celebrations 2 – Polkadoodles

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Picked Raspberry, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hot Buy – Recollections – Jewel Tones

Die Cut: Gina Marie Designs – Loopy Oval

Embossing Powder: Ranger – Clear Super Fine Detail

Miscellaneous: Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape, Crafts – Rhinestone Stickers

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R22, R20

Hair: E47, E44, E43, E42

Dress and Shoes: B06, B04, B02, B01, RV66, RV63, RV55, RV52, E50, E30, Atyou Spica – Blossom – 14

Cake: RV55, RV02, RV00, E25, E23, G07, G02, Gelly Roll Sakura #5 Pen

Flowers in Hair: RV55, RV00, Y17, Y02, Y00

Presents: G02, G00, RV55, RV52, RV02, B02, Gelly Roll Sakura #10 Pen

Shadow: C3, C2, C1, Colorless Blender

Hope you like it and have a great week!

Purr-fect Day!!


Today, I’m sharing a birthday card that I made using Dreamerland Crafts stamps called Meow Meow 03 – D20015. This little kitten is having an amazing day, getting up early, playing, relaxing and then saying her prayers for the next day to be the same all over again. If we could all live the life of a spoiled kitten, life would be amazing! LOL!

To make this card I used a base card of 6.5″ x 8.25″ using Hammermill – Premium Colour 100 lb. cardstock. I scored it at 3.25″.  Next, using my Couture Creations – Go Power and Emboss and Whimsy Stamps – Slimline Pillows Die, I die cut Copic Marker X-Press It Blending Card and Recollections – Petite Floral – Double Sided paper.  Using my MISTI and Memento – Tuxedo Black ink, I stamped all of the images onto the various shaes and coloured them in with Copic markers. I created the sentiment using a ruler and Pigma Micron 03 black marker.

To assemble the card, I applied glue to the back of the patterned paper and attached it directly to the base. Tim Holtz Distress Ink – Picked Raspberry was used to ink around all of the outside and inside edges of the die cut. For all of the images and sentiment, I first ran them through my Xyron Creative Station to turn them into stickers. Also, this would give me full coverage to lay them flat. I inserted each of them into their respective places of the die cut.

Card Recipe:

Stamps: Meow Meow 03 – D20015 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Petite Floral – Double Sided 12 x 12 in (30.4 x 30.4 cm)

Die Cut: Whimsy Stamps – Slimline Pillows Die (WSD473)

Tools: MISTI – Most Incredible Stamping Tool, Couture Creations – Go Power and Emboss, Pigma Micron 03 black marker, Xyron Creative Station

Image coloured with Copic Markers:

Cats: C7, C5, C3, R30, R20, 100

Sun, Window, Sky:  Y08, Y06, Y04, B04, B02, B01, E25, E23

Bandana: RV02, RV000, R27

Coffee Cup: R85, R83, R81, E23, E21, C3, C1, C0

Backgrounds: G02, G00, G000, G0000, RV10, RV02

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

My Cup of Tea


Sharing a card I made for the Spring / Summer Coffee Lovers Hop using You’re A Squeak-Heart! (Kraftin’ Kimmie Stamps)!

The image was coloured with copic markers.

Card Recipe:

Stamp and Sentiment: You’re A Squeak-Heart! (Kraftin’ Kimmie Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Tim Holtz Distress Ink – Fossilized Amber, VersaMark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Paper: Copic Marker X-Press It Blending Card, Stampin’ Up! – Have a Cuppa – 6″ x 6″

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers, Poppystamps – Christmas Quotes

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Brother Scan and Cut

 

Hope you like it and have a great week!

Birthday Girl!!


Sharing image and sentiment from KLM Digital Designs today from the new February release called Karah’s Cupcake. This stamp set comes with 3 sentiments. This image brings back memories of when I was little and my mom used to bake us fancy cakes and cupcakes for our birthdays every year.

To make the card, I first imported the image and sentiment into Microsoft Word. I sized both the image and sentiment to fit 5″ x 3.6″ and printed everything out onto Copic Marker X-Press It Blending Card using my HP Printer. The image was coloured in with Copic markers. I had a few issues with her hair using my markers, so I used PrismaColor pencils to try and fix it. For the shadow behind the girl, I just used the same 2 markers several times on the background wall. I die cut some pink cardstock using Your Next Stamp – Stitched Rectangle Die Set and then inked around the edges using Tim Holtz Distress Ink – Picked Raspberry.

I used Hot Buy Recollections Card base of 5.25″ x 4.25″ for the base and attached the die cut directly to the base using double-sided tape. The completed image was popped up using 3M VHB – 2 sided tape to finish off the card.

Card Recipe:

Stamp and Sentiments: Karah’s Cupcake (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Picked Raspberry

Die Cuts: Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Paper: Copic Marker X-Press It Blending Card, Hot Buy Recollections

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Hair: E47, E44, E43, PrismaColor Pencils – Eggshell PC140, Ginger Root PC1084, Chocolate PC1082, Light Umber PC941

Eyes: E43, C0, G07, G03, G00, Sakura Glaze – Black, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #8 Pen

Blouse Headband, Bow, Lips, Cupcake Wrapper: R85, R81, RV00, RV000

Cupcake and Dish: RV09, RV04, RV02, BV23, BV20, BV000, Atayou Spica – Pink 02, Atayou Spica – Blossom 14, Wink of Stella – Clear

Cherry and Stem: R37, R35, R24, G99

Table Top: E47, E39, E37, E35, E33, E31

Wall: BG32, BG10

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

 

More Bubbles!


It’s Wednesday, and this week, I made a fun card using  Burts Bath – R103 (High Hopes Rubber Stamps) for the main image and Filled With Bubbles – H119 (High Hopes Rubber Stamps) for the sentiment. Burt sure looks happy as he’s letting all of his troubles float away! LOL!

To make my card this week, I used Hammermill – Premium Colour 100 lb. cardstock for my base folded at 5.5″ x 4.25″. For the main background, I used Doodlebug Design Inc. – Under The Sea paper cut to the same size as the base and attached it using double-sided tape. Tim Holtz Distress Ink – Picked Raspberry was used to ink around all of the edges. Whimsy Stamps – Slimline Pillows Die was used to cut out the shape for the sentiment and Die-Namics My Favourite Things – PCD Fishtail Figs STX for the flag behind the sentiment. I inked around the edges of the sentiment die cut with Copic Marker – BV04 to frame it. Tim Holtz Distress Inks – Peacock Feathers was used to ink around the edges of the flag. Avery Elle – Wonky Stitches Die was used to die cut Copic Marker X-Press It Blending Card.

I stamped the image and sentiment using Memento – Tuxedo Black using my MISTI and coloured in the image using Copic markers. I added 3M VHB – 2 sided tape to the back of the coloured image and attached it to the base card. I ran the flag through my Xyron Create a Sticker as I wanted it to lay completely flat against the background. I attached this to the base and then added 3M VHB – 2 sided tape to the back of the sentiment and attached it over top of the flag and the base. To complete the card, I added a few bubble embellishments from The Robin’s Nest – Peony using Ranger Glossy Accents.

Card Recipe:

Stamp: Burts Bath – R103 (High Hopes Rubber Stamps)

Sentiment Background: Filled With Bubbles – H119 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Peacock Feathers, Tim Holtz Distress Ink – Picked Raspberry

Paper: Copic Marker X-Press It Blending Card, Doodlebug Design Inc. – Under The Sea – 6″x6″, Hammermill – Premium Colour 100 lb.

Die Cuts: Avery Elle – Wonky Stitches Die – D-04-11, Whimsy Stamps – Slimline Pillows Die – WSD473, My Creative Time – Rectangle Frame Dies, Die-Namics MFT-489 PCD Fishtail Figs STX

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Xyron Create a Sticker, Ranger Glossy Accents, The Robin’s Nest – Peony – dd-8

Images coloured with Copic Markers:

Duck: Y19, Y18, Y15, Y13, Y08, YR16, YR14, YR12, YR07

Brush: E59, E39, E35, E31, Copic Multiliner – Sepia – 0.1

Hat: BG15, BG13, BG11, BV04, BV02, BV00, RV04, RV02, RV000, Y17

Bird Bath: C7, C5, C3, C2, C1, C0

Bubbles: BG15, BG13, BG11, BG10, BV04, BV02, BV00, BV0000, RV02, RV00, RV000, Y11, Y000, Y0000

Grass: YG13, YG11, YG03, YG01

Sky: B02, B01, B00, B000

Wonky Border: BV04, BV02, BG15

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

When You Believe!


Today, I’m sharing an inspirational card that I made using Dreamerland Crafts stamps called When You Believe – D20007. I’ve been told that to become a ballet dancer it takes a lot of hard work and practice. This can also be said for many other professions as well. The overwhelming feeling of success and joy when one achieves their goals is always worth the hard work.

To make this card I used a base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. I printed out the background using my HP Printer and pattern from Nana Vics Digitals – Ballerina #1 Digital Paper. I cut it the same size as the base card and used double-sided tape to attached it on top. Tim Holtz Distress Ink – Picked Raspberry was used to ink around all of the edges.

I stamped the image using Memento – Tuxedo Black ink and my MISTI onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers. My Creative Time – Rectangle Frame Dies and my Cuttlebug were used to die cut the image. I stamped the sentiment using my MISTI and Tim Holtz Distress Ink – Picked Raspberry onto Hammermill – Premium Colour 100 lb. cardstock. Then, I cleaned off the stamp and stamped the sentiment again, this time using VersMark ink. I added Ranger – Clear Super Fine Detail embossing powder and then heat embossed the powder with Marvy Uchida – Embossing Heat Tool. I fussy cut around the sentiment and used Tim Holtz Distress Ink – Picked Raspberry ink to ink around the edges. The image was then centred over the fancy rectangle I die cut using DIY Scrapbooking Artist – Nested Stitched Scallop Rectangle Dies using glue.

To assemble the card, I added 3M VHB – 2 sided tape to the backs of the large triangle and sentiment. These were both attached directly to the patterned background. Lastly, to complete the card, I used some Craftin’ Desert Divas – Sherbet Sequins for embellishments.

Card Recipe:

Stamp and Sentiment:  When You  Believe – D20007 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, VersaMark, HP Printer – Colour

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Nana Vics Digitals – Ballerina #1 Digital Paper

Die Cut: My Creative Time – Rectangle Frame Dies, DIY Scrapbooking Artist – Nested Stitched Scallop Rectangle Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape, Craftin’ Desert Divas – Sherbert Sequins

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair:  E15, Y21, YR23

Dress, Bun Band and Shoes: RV09, R83, R81, RV00, RV000

Background: RV09

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

When You Love Someone!


Today, I’m sharing a Valentine’s card that I made using Dreamerland Crafts stamps called When You Love Someone – D20005. I just love this adorable couple. This image could also be used for an Anniversary card too!

To make this card I used a base card of 6″ x 6″ using AC White cardstock. I added the base background using the paper from Stampin’ Up! – Have a Cuppa with double-sided tape. Then, I die-cut 4 hearts using my Cuttlebug and Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted. Tim Holtz Distress Ink – Worn Lipstick and Tim Holtz Distress Ink – Evergreen Bough were used to colour around the edges of the card and also all of the hearts.

I stamped the image using Memento – Tuxedo Black ink and my MISTI onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers. Then I used my Brother Scan and Cut to cut around the image. I stamped the sentiment using Versa Fine – Onyx Black ink and my MISTI. I used Ranger – Clear Super Fine Detail embossing powder and then heat embossed the powder with Marvy Uchida – Embossing Heat Tool onto the smallest heart.

To assemble the card, the largest heart was attached directly to the base background using glue. I added 3M VHB – 2 sided tape to the backs of the remaining hearts and coloured image and then layered them on top of each other. To complete the card, I added in some hearts from Jot – Jewel Stickers.

Card Recipe:

Stamp and Sentiment:  When You Love Someone – D20005 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Worn Lipstick, Tim Holtz Distress Ink – Evergreen Bough

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Stampin’ Up! – Have a Cuppa – 6″ x 6″, AC White cardstock, Hot Pink cardstock

Die Cuts: Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape, Jot – Jewel Stickers

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair:  E47, E44, E43, E15, Y38, Y21, YR23

Dress, Bow and Shoes: BG72, BG57, BG32, BG11

Shirt and Vest: G82, G46, G43, G40, E29, E27, E25, E23

Boots: E57, E55, E53, E51

Heart: BG57, BG45, BG34, R85, R83, R81, C3, C2, C1

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Birthday Belle!


It’s Wednesday, and this week I’m sharing a CAS card featuring Birthday Belle – T076 from (High Hopes Rubber Stamps) with the sweet sentiment Bummer – H263 (High Hopes Rubber Stamps). Our birthday girl this week isn’t too keen on having another birthday to remind her how old she is, but she is still having fun blowing out all of the candles. LOL! I decided to colour her outfit and cake pink, because I remember how much my grandmother loved that colour.

To create the card this week, I stamped the main image and then coloured it in with Copic Markers. My Creative Time -Stitched Squares Inside and Out die and my Cutttlebug were used to cut out the main coloured image and the hot pink background paper.

For the base card I cut some yellow cardstock 10″ long by 5″ high. It was then scored and folded in half to be 5″ x 5″. All of the edges for the base card and die-cuts were then inked around using the various Tim Holtz Distress inks listed below. I mounted the hot pink cardstock directly to the base using double-sided tape. Then the main image was popped up with 3M VHB – 2 sided tape. Finally, to finish it off, I used some crafty dots by Crafts.

Card Recipe:

Stamp: Birthday Belle – T076 (High Hopes Rubber Stamps)

Sentiment: Bummer – H263 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Tim Holtz Distress Ink – Fossilized Amber, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hot Pink Cardstock, Yellow Cardstock

Die Cuts: My Creative Time -Stitched Squares Inside and Out

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, Crafts Stickers – 02-3010802

Image coloured with Copic Markers:

Skin,Lips and Eyeshadow: E21, E11, E04, E00, E000, R22, R20, YG09, YG06, YG03

Hair: N5, N3, N1

Blouse and Cake Icing and Earring Pinks: RV09, RV06, RV04, RV02, RV00, RV000

Cake Flowers, Leaves and Trim : G17, G14, G07, Y38, Y19, Y18, Y04, BG32, BG13, BG10

Balloons: BG34, BG18, BG15, BG10, RV09, RV06, RV04, RV00, Y38, Y19, Y04, Y00

Candles: BG34, BG13, BG10, YR14, Y19, Y04, Y00

Hat: RV09, RV06, RV02, BG34, BG10

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Time to Smell the Flowers!


It’s Wednesday, and this week, I used Daffodil Bunny – SLF006 (High Hopes Rubber Stamps) for the main image from the new August 2020 release and Smell The Flowers – G189 (High Hopes Rubber Stamps) for the sentiment. This adorable little bunny is taking time out to smell the flowers. We have a really nice garden of flowers that my husband takes care of. I’m not a green thumb at all. LOL! It’s always nice to take a moment and enjoy the beauty of them.

To make my card this week, I started out with a simple white card base, sized at 6″ x 6″. The base background was also cut at 6″ x 6″ using Craft Consortium – Cottage Garden paper and then inked around the edges with Tim Holtz Distress Ink – Fossilized Amber. I just thought this paper went so well with this adorable image. I added the 2 colours of ribbon with some 2-sided tape and then adhered the entire background paper to the base with 2-sided tape.

The scalloped circle and inside image circle were both die cut using my Cuttlebug and Craftin Desert Diva’s Stitched in Circle Dies. The circle in between the 2 of them was die cut with Lifestyle Crafts Cutting Dies – Nesting Circles. The edges of the large scalloped circle were inked with Tim Holtz Distress Ink – Picked Raspberry. For the sentiment, My Creative Time – Rectangle Frame Dies were used. The die was larger in depth, so I just die cut one side and then turned it around and only put it part way through my Cuttlebug to cut the other edge. It too, was then inked around the edges with Tim Holtz Distress Ink – Fossilized Amber. The image was coloured with Copic Markers.

To assemble the remainder of the card, the mid circle was attached directly to the large scalloped circle and then popped up with 3M VHB – 2 sided tape. The image and sentiment were popped up on top with 3M VHB – 2 sided tape as well.

Card Recipe:

Stamp: Daffodil Bunny – SLF006 (High Hopes Rubber Stamps)

Sentiment: Smell The Flowers – G189 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Fossilized Amber, Tim Holtz Distress Ink – Picked Raspberry

Paper: Copic Marker X-Press It Blending Card, Momenta – Cardstock, Crafts Sparkling Stickers – 02-3068629, Craft Consortium – Cottage Garden 6″x6″

Die Cuts: Craftin Desert Diva’s Stitched in Circle Dies, Lifestyle Crafts Cutting Dies – Nesting Circles, My Creative Time – Rectangle Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Bunny: E37, E35, E34, E33, E31, E30, R11, R02, R000

Bow: RV19, RV17, RV13

Grass and Greenery for Plants: BG99, BG97, G21, YG17, YG13, YG07, YG03, YG01

Daffodil: E15, Y38, Y18, Y04

Clouds and Sky: B60, B01, B00, B000, B0000, C0, Colorless Blender

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Wine Birthday Divas!!!


Sharing a birthday card today that I made for my aunt using Wine Divas – SC0677 (AI Art Impressions) for both the images and sentiments. My aunt is into crafts and cardmaking too and sometimes when I stay over at her house, we like to share a bottle of wine together, talk and laugh. That is why when I saw this stamp set, I knew I had to make this special card for her birthday. LOL!

To make this card, I used my MISTI to get a nice clean stamped image using Memento – Tuxedo Black and Copic Marker X-Press It Blending Card. Next I die-cut out the stamped image using my Cuttlebug and Your Next Stamp – Stitched Rectangle Die Set (YNSD214). I cut the background paper from Doodle Bug Designs Inc. – Sugar Shoppe at 5.5″ x 4.25″ and mounted it onto top of a white card base 5.5″ x 4.25″. I then inked around all of the edges using Tim Holtz Distress Ink – Picked Raspberry. Before, popping up the base image onto the background with 3M VHB – 2 sided tape, I used my MISTI, Versa Fine – Onyx Black and Ranger – Clear Super Fine Detail embossing powder to add in the sentiment. I heat set the embossing powder with my Marvy Uchida – Embossing Heat Tool.

For the inside of the card, I mounted the background paper from Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad onto a card base of 5.5″ x 4.25″. Then, I fussy cut around the image and attached it to the card base using 2 sided tape. I embossed the sentiment to finish off the inside.

Card Recipe:

Stamp and Sentiment: Wine Divas – SC0677 (AI Art Impressions)

Inks: Memento – Tuxedo Black, VersaFIne – Onyx Black, Tim Holtz Distress Ink – Picked Raspberry

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad

Die Cuts:  Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R29, R24, R22, R20

Hair Combos: E47, E44, E43, E18, E08, YR18, YR14, E29, E25, E21, E15, YR23, Y21

Blouses, Dress, Earrings and Shoes: BG15, BG11, BG10, BV04, BV02, BV01, BV00, E35, E34, E33, Colorless Blender

Pants: B26, B23, B21

Table and Chairs:  W3, W2, W1, W0

Big Chair: E37, E35, E34, E33

Wine: R29, R17, R14

Wine Bottle: R29, R17, R14, E15, Y38, Y17, Y08

Purse: E15, Y38, Y17, Y08, YR27

Background: R85, R83, R81, Y08, Y04, Y02

My Aunt loved her card and I hope that you do too! Hope you like it and have a great week!

Birthday Girl! We Need To Put the Shades On!


Sharing a birthday card today that I made using Sunny Shades Set – SC4988 (AI Art Impressions) for both the image and sentiment.

To make this card, I used my MISTI to get a nice clean stamped image using Memento – Tuxedo Black and Copic Marker X-Press It Blending Card. Next I die-cut out the stamped image and background papers using my Cuttlebug and My Creative Time – Stitched Squares Inside and Out. I then inked around the edges using Tim Holtz Distress Ink – Picked Raspberry and Tim Holtz Distress Inks – Peacock Feathers.

I mounted the background paper from Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad onto a card base of 5.5″ x 4.25″. Then, I popped up the next layer using 3M VHB – 2 sided tape. I mounted the main coloured image onto some Hotpink cardstock and then cut a narrow edge around it. Lastly, I popped up it up with 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment: Sunny Shades Set – SC4988 (AI Art Impressions)

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Picked Raspberry

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Hotpink cardstock

Die Cuts:  My Creative Time – Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R29, R24, R22, R20

Hair Combos: E47, E44, E43, E18, E08, YR18, YR14, E29, E25, E21, E15, YR23, Y21

Blouses, Earrings and Shoes: BG18, BG13, BG11, Y19, Y15, Y13

Pants: B26, B23, B21

Boots: E27, E25, E23

Blouse 1, Earrings and Shoes:  R89, R85, R83, R81, RV01, RV000

Blouse 2, Earrings and Shoes: Y17, Y15, Y13

Blouse 3, Earrings and Scarf: YR21, YR20, YR16, YR14, YR12

Blouse 4 and Jacket: BG15, BG13, BG11, V09, V06, V04

Glasses: BG05, BG02, BV01, BV00, Gelly Roll Sakura #5 Pen

Background: B04, B02, B01, B00, C2, C1, C0

Hope you like it and have a great week!

May Your Day Be Filled With Love!!


It’s Wednesday, and I’m back this week to start off April with lots and lots of love from Elmer the Elephant using Elmer Elephant – Q043 (High Hopes Rubber Stamps) for the main image and Large Filled With Love – H004 (High Hopes Rubber Stamps) for the sentiment. With everything happening in the world right now, I think we could all use a little bit of love. When I was a child, Elmer was also called Elmer the Safety Elephant, so I hope that you and all of your loved ones are keeping safe right now too!

To make this card I first die cut some Copic Marker X-Press It Blending Card using Your Next Stamp – Stitched Rectangle Die Set (YNSD214) and my Cuttlebug. Next I used my MISTI and Memento – Tuxedo Black ink to stamp the image and the sentiment. I coloured in the image using Copic markers. Then I created my own background using a mixture of Tim Holtz Distress Inks – Festive Berries, Spun Sugar and Picked Raspbery and Kraftin’ Kimmie – Happy Hearts Stencil. I also did all around the edges with the Picked Raspberry. Lastly, added in the bottom border of hearts using Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted which I ran through my Cuttlebug twice with 2 different red cardstock. Then I inlayed the lighter colour into the darker hearts. I had also ran the cardstock through my Xyron Create a Sticker beforehand to make the die-cut work like a sticker and easy to inlay. I also used one of the small hearts for the “o” in “Love” and added some Spectrum Noir Sparkle Pen – Red Berry on top of it. Finally, I mounted the finished image onto a white base card 5.5″ x 4.25″.

Card Recipe:

Stamp: Elmer Elephant – Q043  (High Hopes Rubber Stamps)

Sentiment: Large Filled With Love – H004 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz – Festive Berries, Tim Holtz Distress Ink – Spun Sugar, Tim Holtz Distress Ink – Picked Raspberry

Paper: Copic Marker X-Press It Blending Card, Various scraps of red cardstock

Die-Cuts: Your Next Stamp – Stitched Rectangle Die Set (YNSD214), Sizzix Framelets by Stephanie Barnard – 562676 – Hearts Dotted

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Xyron Create a Sticker, Spectrum Noir Sparkle Pen – Red Berry

Image coloured with Copic Markers:

Elephant: C5, C3, C2, C1, C0, R22, R20, R11, RV32

Ground: E35, E34, E33, E31

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

There is no better time to do a little shopping over at the High Hopes Stamps website store!! As there is a sale going on! click HERE to

SAVE 20% STORE WIDE

using coupon code LOVE

 

Aged to Perfection!!!


Sharing a card today that I made using Big Birthday Wishes – SC0794 (AI Art Impressions) for both the image and sentiment.

To make this card, I used my MISTI to get a nice clean stamped image using Memento – Tuxedo Black and Copic Marker X-Press It Blending Card. Next I die-cut out the stamped image and background papers using my Cuttlebug and My Creative Time – Stitched Squares Inside and Out. I then inked around the edges using Tim Holtz Distress Ink – Picked Raspberry and Tim Holtz Distress Inks – Peacock Feathers.

I mounted the background paper from Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad onto a card base of 5.5″ x 5.5″. Then, I popped up the next layer using 3M VHB – 2 sided tape. I mounted the main coloured image onto some Hotpink cardstock and then cut a narrow edge around it. Lastly, I popped up it up with 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment: Big Birthday Wishes – SC0794 (AI Art Impressions)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Picked Raspberry, Tim Holtz Distress Inks – Peacock Feathers

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Hotpink cardstock

Die Cuts:  My Creative Time – Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E47, E44, E43

Blouses, Earrings and Shoes: BG18, BG13, BG11, Y19, Y15, Y13

Pants: B26, B23, B21

Hats and Aprons:  BG13, BG11, RV04, RV02, C2, C1, C0, Colorless Blender

Cake: Y19, Y15, Y13, BG13, E29, E27, E25, R85, R83, R81

Candles: RV09, RV04

Cake Stand: E15, Y35, Y19

Background: B04, B02, B01, B00, N4, N2, N0

Hope you like it and have a great week!

Eek! You’re How Old???


Today I’m sharing a birthday card that I made for my sister-in-law whose nickname is “Kitty”. I have a lot of fun trying to come up with new creations with cats for her birthday each year. This year, I decided to use Going Catty – DP1021 (Clearly Whimsy Stamps), for my main image on the front of the card. Shown below is how it looked before I placed the die cut from Peek A Boo Poppers (YNSD219) – (#Your Next Die) over top of it.

To create the die-cut, I first used Lifestyle Crafts Cutting Dies – Nesting Circles to cut out the main image and then again to cut out the pop-out die cut using Echo Park Paper Co. – Imagine That. I then added glue all around the outside of the circle and glued the two pieces together as shown below.

I created a card base 5.5″ x 4.25″ and then mounted paper from Doodle Bug Designs Inc. – Sugar Shoppe. I popped up the circle previously cut out with 3M VHB – 2 sided tape. I used the sentiment from the same Whimsy Stamp Set. I embossed it using VersaMark and Ranger Embossing Powder White – Extra Fine Detail. Then I cut it out using Ribbon End Dies – My Creative Time. Lastly, I edged around all of the edges using Tim Holtz Distress Ink – Picked Raspberry. Shown below is the card with the pop-up closed.

This is the front of the card with the pop-up open.

On the inside of the card, I used the image from Birthday Critters – 30-466 (Penny Black) and sentiment from
Whatnot Sentiments Set Twelve – CYNS638 (#Your Next Stamp).

All images were stamped onto Copic Marker X-Press It Blending Card using Memento – Tuxedo Black ink and my MISTI.

Card Recipe:

Stamps: Going Catty – DP1021  (Clearly Whimsy Stamps), Birthday Critters – 30-466 (Penny Black)

Sentiment: Going Catty – DP1021 (Clearly Whimsy Stamps), Whatnot Sentiments Set Twelve – CYNS638 (#Your Next Stamp)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Versa Fine – Onyx Black, VersaMark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Echo Park Paper Co. – Imagine That 6″ x 6″

Die Cuts: Peek A Boo Poppers (YNSD219) – (#Your Next Die), Ribbon End Dies – My Creative Time, Lifestyle Crafts Cutting Dies – Nesting Circles

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Cats: W9, W8, W6, W5, R30, R27, R24, R22, R02, Sakura Glaze – Black

Party Hat and Birthday Banner: BG13, BG11, YR16, YR12, RV66, RV63, Y17, Y08, BG05, BG02

Background: BG13, BG11, BG10

Hope you like it and have a great week!

You can find more cards to inspire you at Roberta Stevenson on my Facebook page.

Birthday Wishes!


Today I’m sharing a birthday card that I made for my mom using Yummy Cupcake Bunny (CYNS592) (#Your Next Stamp) on the front of the card and  Rosie Rabbit Gift (CYNS542) (#Your Next Stamp) on the inside of the card.

On the inside:

To make the card I stamped the images on to Copic Marker X-Press It Blending Card using Memento – Tuxedo Black and my MISTI – Most Incredible Stamping Tool to get a nice clean crisp image. After colouring the images, I fussy cut around them both. I then used My Creative Time – Scalloped Stitched Oval Dies to die cut an oval out of Doodle Bug Designs Inc. – Sugar Shoppe paper. I cut the remainder of the paper to be 4″ x 5.25″ and turned it over to the opposite side and mounted it onto a card base of 4.25″ x 5.5″. I used Tim Holtz Distress Ink – Picked Raspberry to ink around the edges.

For the sentiments I used Versa Fine Onyx Black and VersaMark ink and then embossed both with Ranger embossing powders listed below.

To complete the card, I mounted the bunny on the front with 3M VHB – 2 sided tape to pop it up as well as the sentiment.

Card Recipe:

Stamp and Sentiment: Yummy Cupcake Bunny (CYNS592) (#Your Next Stamp), Rosie Rabbit Gift (CYNS542) (#Your Next Stamp)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Versa Fine – Onyx Black, VersaMark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Hot Pink cardstock

Die Cuts:  My Creative Time – Scalloped Stitched Oval Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Bunnies: E29, E27, E25, E23, R30, R02, R85, R83

Cupcake and Wrapper: BG18, BG15, BG11, BG10, YR18, YR16, RV09, RV04, RV02, RV00, E35, E33, E31

Presents and Ribbons: BG18, BG15, BG11, BG10, YR18, YR15, Y06, Y04, Y02, RV04, RV02, RV00

Background: B04, B02, B00

Hope you like it and have a great week!

You can find more cards to inspire you at Roberta Stevenson on my Facebook page.