Tag Archive | Dog

Pumpkin Buddies!!!


It’s Wednesday, and this week, I made a card using Pumpkin Buddies – TT020 by High Hopes Rubber Stamps for the main image and Happy Halloween Script – F232 (High Hopes Rubber Stamps) for the sentiment. These little Hallowe’en friends look like they’re getting ready to scare unsuspecting little ones this year. LOL!

To make my card this week, I began with die-cutting Copic Marker X-Press It Blending Card with My Creative Time – Rectangle Frame Layers for the main image and Whimsy Stamps – Quick Strips Die Set for the sentiment. The image and sentiment were then stamped using my MISTI and Memento – Tuxedo Black ink onto the die cuts. The image and grass were coloured in with Copic markers. The nose and eyes for the characters were coloured in using Sakura Glaze – Black Pen and Gelly Roll Sakura #8 Pen. I stamped out the image a second time and used my Brother Scan and Cut to cut it out so that I could use it as a mask to put over the coloured image. I also die cut a 1.5″ circle out of Inkadoo Stamping Mask Paper for the moon.

I placed the mask over top of the coloured image and the moon masked circle onto the large rectangle before I inked in the sky using various Tim Holtz inks listed below. I watched a video on YouTube by Glitter Grunge Greetings for inspiration on how to create my night sky. Once the sky was complete, I removed the mask for the moon and used the outside paper that I had cut the moon from to protect the sky while I inked in the texture for it using Picket Fence Studio Blender Brushes, Tim Holtz Ranger Distress Oxide – Fossilized Amber and Tim Holtz Distress Ink – Hickory Smoke. I spritzed the moon and sky with some water. I removed all of the masks at this point and using double-sided tape, I applied the coloured image to my card base using The Paper Studio – Primary Base Colours 4.25″ x 5.5″. Lastly, I applied some Tim Holtz Ranger Distress Oxide – Fossilized Amber to the outside edges of my sentiment and pop it up on the card using 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Pumpkin Buddies – TT020 (High Hopes Rubber Stamps)

Sentiment: Happy Halloween Script – F232 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Ranger Distress Oxide: Fossilized Amber, Wilted Violet, Black Soot, Faded Jeans and Seedless Preserves, Tim Holtz Distress Ink – Stormy Sky, Chipped Sapphire, Tumbled Glass, Hickory Smoke

Paper: Copic Marker X-Press It Blending Card, The Paper Studio – Primary Base Colours 4.25″ x 5.5″

Die Cuts:  My Creative Time – Rectangle Frame Layers, Whimsy Stamps – Quick Strips Die Set – WSD330

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Sakura Glaze – Black, Pen Gelly Roll Sakura #8 Pen, Brother Scan and Cut, Inkadoo Stamping Mask Paper, Picket Fence Studio Blender Brushes

Image coloured with Copic Markers:

Bat: BV29, BV25, BV23

Pumpkin: E08, YR18, YR16, YR12, Y04, G99, G21, YG67, YG19, Y17, Y15, Y08

Cat: N10, N6, N5, R30, R20, YG06

Dog: E29, E27, E25, E23, E34, E33, E31

Oak Leaves: E13, E07, YR27, YR12

Grass: G99, G21, YG67, YG19

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Merry and Bright!!


Today, I’m sharing a light up Christmas card using Dreamerland Crafts stamps called Lets Decorate Our Home – D18037 and for the sentiment Holiday Sentiments Set 003. It’s never too early to start making Christmas cards and here’s hoping that this card will brightens someone’s day this coming Christmas.

To make this card I used a base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. For the background paper, I used my Cuttlebug and My Creative Time – Rectangle Frame Dies to die cut American Crafts – “Holiday” paper. The edges were inked with Tim Holtz Distress Inks – Peacock Feathers and then I adhered the background to the base card using double-sided tape. Using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto Copic Marker X-Press It Blending Card and coloured it in with Copic markers. I added some Stickles – Diamond to the pompom on the hat and fur at the top of the little girl’s boots. For the fluffy snow, I used Cosmic Shimmer Fluffy Stuff and sprinkled on some DecoArt Glamour Dust while it was still wet. Using my Marvy Heat Embossing Tool, I heated up the liquid for it to puff up and look like sparkling snow. I poked holes in the card where I wanted the blue lights to go. I applied some tissue paper over the holes on the back of the image to diffuse the lights. Using Versamark ink and my MISTI, I stamped the sentiment and then applied Ranger Embossing Powder White – Extra Fine Detail. This too was heated with my Marvy Heat Embossing Tool. Lastly, added some snowflakes using a Gelly Roll Sakura #10 Pen. I then set the coloured image aside.

It was now time to set up the bright blue lights for the house using Chibi Lights, copper tape and a battery. I cut out an another rectangle slightly smaller than the coloured image. Placing the coloured image over top of the smaller rectangle, I used a pencil for the placement of the lights on the roof. For the placement of the battery, I used the remote in the girl’s hands as a guide. After mapping out the route for the lights, I place the copper tape down and added 3 blue Chibi Lights to the “+” and “-” paths leading back to the battery. The set up was tested to make sure the lights would come on. Once this was completed, I used 3 layers of 3M VHB – 2 sided tape around the 3 sides of the battery to pop the image up high enough off of the card so that the battery would only light up the lights when someone pressed down on it. To keep the card even all the way around, I added 3 layers of 3M VHB – 2 sided tape to the remainder of the smaller rectangle. The image was then attached to the smaller rectangle. I added some double-sided tape to the back of the smaller rectangle and adhered it directly to the card to finish it off.

Card Recipe:

Stamp: Lets Decorate Our Home – D18037 – Dreamerland Crafts

Sentiment: Holiday Sentiments Set 003 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Peacock Feathers, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., American Crafts – “Holiday” 6″ x 6″ (15.2 x 15.2 cm)

Die Cuts: My Creative Time – Rectangle Frame Dies

Stickles: Diamond

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Forever in Time – Pop-Dot Tape, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust, Marvy Heat Embossing Tool, Sakura Glaze – Black, Gelly Roll Sakura #10 Pen, Chibi Lights

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20 (Eyes – Sakura Glaze – Black)

Hair: E47, E44, E43

Hat, Scarf and Boots: BG72, BG57, BG32, BG11

Coat: R59, R37, R35

Pants and Boot Soles: E25

Dog: E27, E25, E23 (Eyes and Nose – Sakura Glaze – Black)

Rabbit: E35, E33, E31 (Eyes and Nose – Sakura Glaze – Black)

House: E57, E55, E53, Y06, Y02

Roof: C5, C4, C3, C2, C1

Lights: Y17, Y02, B000

Snow: B60, B000, B0000, Cosmic Shimmer Fluffy Stuff, DecoArt Glamour Dust

Sky: B99, B97, B95

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Feel Good!!


Today, I’m sharing a card that I made using Dreamerland Crafts stamps called Having You Around – D19078 for the main image and sentiment. There’s nothing like the love between a boy and his faithful companion. They become best friends as they both grow older together!!!

To make this card I used a base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. I also cut a panel the same size out of Copic Marker X-Press It Blending Card. I used this to create my background using stencils I created to make clouds by Avery Elle – Pierced Clouds Die (D-05-01) and inks listed below by Tim Holtz. Copic markers were used to colour in the water and I used My Favourite Things – Slimline Grassy Edges Stencil as a guide for the grass on the bottom of the card. Using my MISTI and Versa Fine – Onyx Black ink, I stamped the sentiment and then embossed the ink with Ranger – Clear Super Fine Detail embossing powder. This was heat set with Marvy Uchida – Embossing Heat Tool. I used double-sided tape and attached my background panel to the base card.

Using my Cuttlebug and dies from Studio Light – Wonderful Autumn, I cut the trees and landscape out of Copic Marker X-Press It Blending Card. Using my Copic markers, I coloured these in as well. Then I layered them on top of each other and used glue to adhere them to the coloured background.

Next, using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto Copic Marker X-Press It Blending Cardstock and coloured it in with Copic markers. I fussy cut around the image by hand and used a black marker to go around all of the edges. 3M VHB – 2 sided tape was applied to the back of the image and it was placed on top of the background to finish off the card.

Card Recipe:

Stamp and Sentiment: Having You Around – D19078 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Broken China, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: Studio Light – Wonderful Autumn – StencilWA311, Avery Elle – Pierced Clouds Die (D-05-01)

Stencil: My Favourite Things – Slimline Grassy Edges Stencil (ST-151)

Embossing Powder: Ranger – Clear Super Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Picket Fence Studio Blender Brushes, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R22, R20

Hair: E47, E44, E43, E40

Shirt and Hat: E89, E87, E84, R24

Jeans:  B26, B23, B21

Dog: E55, E53, E51

Boat: E49, E27, E25, E23, E21

Trees: E25, E23, G99, G94, G82

Grass: YG17, YG13, YG03, YG01

Water: B93, B91, B52, B41, B06, B04, B02, B01, B000

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Furry and Bright!!


Today I’m sharing this adorable Gnomes and Pets image from KLM Digital Designs new August release. I just loved this adorable stamp and decided it would make an awesome Christmas card for all of your furry loving friends. Who couldn’t resist those adorable little faces?

I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. The image was coloured in with Copic markers, and my Brother Scan and Cut was used to fussy cut around the image. A black marker was used to go around all of the edges.

For the main background, a green card base of 5.5″ x 4.25″ by The Paper Studio – Christmas Box of Cards 2012 Collection was used. Recollections – “Jolly Holiday” paper was cut at 5.5″ 2.25″ x and Recollections – Christmas Pets was cut at 5.5″ x .5″ twice. Glue was used to adhere each panel to the base card. The sentiment was stamped using Versa Fine – Onyx Black and embossed with Ranger – Clear Super Fine Detail embossing powder and heat embossed using Marvy Uchida – Embossing Heat Tool. Along the bottom, Marvy Uchida Snow Marker was applied and while still wet, Martha Stewart Crafts – Crystal Fine Glitter was applied. To make it fluffy, Marvy Uchida – Embossing Heat Tool was used.

I popped up the image with 3M VHB – 2 sided tape. The little black and white kitty from Dress It Up – Kitten Kaboodle was added to complete the card.

Card Recipe:

Stamp: Gnomes and Pets (KLM Digital Designs)

Sentiment: My Favourite Things – Happy Pawlidays

Inks: HP Printer Grayscale, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Recollections – “Jolly Holiday” – 6″ x 6″ paper pad, Recollections – Christmas Pets – 6″ x 6″ paper pad, The Paper Studio – Christmas Box of Cards 2012 Collection

Embosssing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: 3M VHB – 2 sided tape, Martha Stewart Crafts – Crystal Fine Glitter, Marvy Uchida – Embossing Heat Tool, Dress It Up – Kitten Kaboodle, Marvy Uchida Snow Marker 3MM

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W5, W4, W3, W2, W1, W0, W00

Shirt: G99, G21, YG67, YG17

Pants: B26, B23, B21

Hat: R59, R39, R37, R35

Boots: E29, E27, E25, E23, E21

Dog: E37, E35, E33, E31, E23, E15, C7, C5, C3, C2, C1, Black, R22, R02, R00, Gelly Roll Sakura #8 Pen, Sakura Glaze – Black

Cat: C9, C7, C5, C4, C3, C1, R22, R02, R00, YG05, Sakura Glaze – Black

Hope you like it and have a great week!

KLM is having a LABOR DAY SALE.
You should check it out. Special is available until September 20, 2020.
15% OFF ALL CLEAR STAMPS
CODE: LABORDAY

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Wishing You the Sweetest Things!


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing Dreamerland Craft Stamps Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar and Love The Music From My Guitar – D172006! This little boy loves his guitar and all of the animals love his music.

To make his card, I stamped all of the images using my MISTI, Memento – Tuxedo Black ink and Copic Marker X-Press It Blending Card. I coloured in all of the images using Copic markers and then used my Cuttlebug and all of the die cuts from Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar (Dreamerland Crafts Clear Stamps). I also die cut the sentiment at the same time and stamped it with Versa Fine – Onyx Black and then heat embossed it using Marvy Uchida – Embossing Heat Tool and Ranger – Clear Super Fine Detail embossing powder..

I was now ready to do the background. To achieve this I cut several die cuts using Monte Mart A4 Watercolour Book paper, Lawn Cuts – Simple Stitched Hillside Borders – Lawn Fawn and Your Next Stamp – Stitched Rectangle Die Set (YNSD214).

For the sky I used several Tim Holtz Blue inks in various shades listed below using a stencil that I had created from Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie. For the grass I used various shades of Tim Holtz green inks – (see below).

I ran all of the die cuts and the back 2 layers of grass through Xyron Creative Station. Then I set them all aside.

I was now ready to assemble my card. I layered the first 2 die cuts onto the main die cut and then popped up the bottom grass cut with 3M VHB – 2 sided tape. I then added on the characters that I made stickers out of for easy assembly. I popped up the upper half of the little dog with 3M VHB – 2 sided tape. Once the scene was completed I mounted it onto 5.25″ x 4.25″ white cardstock.

Card Recipe:

Stamps and Sentiment: Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar (Dreamerland Crafts Clear Stamps), Love The Music From My Guitar – D172006 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Clouds: Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Broken China

Grass: Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Bundled Sage, Tim Holtz Distress Ink – Twisted Citron, Tim Holtz Distress Inks – Peeled Paint

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Mont Mart A4 Watercolour Book paper – Acid Free – 190 GSM, Recollections – White Cardstock

Die Cuts:  Your Next Stamp – Stitched Rectangle Die Set (YNSD214), Coordinating Die & Clear Stamp Package (D172906) for Character Stamp D172006 Love The Music From My Guitar (Dreamerland Crafts Clear Stamps), Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E47, E44, E43

Shirt: BG49, BG45, BG34

Pants: B26, B23, B21

Guitar: E99, E97, E93, E51, E35, E33, E31, YR27

Bird: B04, B02, B00, Y38

Dog: E35, E34, E33, E31

Rabbit: C7, C5, C3, R30, R02

Cat: W9, W7, W5

Pig: E93,E04, R20, R00, R000, E44, E04

Background: B04, B02, B00

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.