Tag Archive | Crystal – Stickles

Winter Friends!!

Nov15

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Winter Friends – TT048 for the main image and Jingle All the Way – H040, for the sentiment. Snowmen are one of my favourite images to colour and how adorable is this happy snowman singing to his little friend?

To make my card this week, I began with a card base of 6″ x 6″ using AC Cardstock – White. I adhered American Crafts – “Kringle and Co” 6 x 6 in. cardstock to the base front. Red and green cardstock were cut to the sizes of 6″ x 1.25″ and 6″ x 1-1/8″ from some spare paper I had. I adhered the green to the red using double-sided tape and some glue to allow me to centre it. The combined strip was put through a Xyron Create a Sticker to keep it flat. I added this combined strip to the card approximately a .25″ up from the bottom. Tim Holtz Distress Ink – Rustic Wilderness was used to ink around all of the edges of the card and it was set aside to dry.

Using my Cuttlebug and paper from Copic Marker X-Press It Blending Card, I die cut the frame with Gina Marie Designs – Loopy Oval die cuts. The image was stamped onto the die cut using my MISTI and Memento – Tuxedo Black ink. I coloured in the image and then added the snow in the sky using a Gelly Roll Sakura #10 Pen. Stickles – Crystal was added to the snow on the ground and along the branches to give it some sparkle.  I set the image to the side to allow the Stickles time to dry.

I cut a piece of Recollections Christmas Ink Jet Printable Glitter Paper to the size of 4″ x 1″. Using my MISTI once again, I stamped the sentiment onto it using Memento – Tuxedo Black ink and then cut a fish tail on each end. U-Line double sided tape was added to the back of the sentiment and then it was popped up and centred in between the red and green stripe. U-Line double-sided tape was added to the back of the image and it was popped up onto the card above the sentiment once the Stickles had dried. Lastly, I die cut 2 pinecones and some pine leaves using my Cuttlebug and dies from Stampin’ UP! – Pretty Pines Thinlets die set. Liquid glue was used to pieced them altogether. I adhered these to the 2 upper corners of the card and then applied some Stickles – Crystal to the leaves to finish off the card.

Card Recipe:

Stamps: Winter Friends – TT048 (High Hopes Rubber Stamps)

Sentiment: Jingle All the Way – H040 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, American Crafts – “Kringle and Co” 6 x 6 in. (15.2 cm x 15.2 cm), Recollections Christmas Ink Jet Printable Glitter Paper

Die Cuts: Gina Marie Designs – Loopy Oval, Stampin’ UP! – Pretty Pines Thinlets (141851)

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Stickles – Crystal, Cuttlebug, Xyron Create a Sticker

Image coloured with Copic Markers:

Snowman: BV20, B0000, YR68, Y38, Y18, R29, R24, RV00, Colorless Blender

Snowman Hat, Mittens and Scarf: G99, GY67, YG63, YG61, R59, R37, R35

Snowman Boots and Buttons: C9, C7, C5, C3

Bird: R46, R14, R08, Y17

Bird Hat and Scarf: G99, YG67, YG63, R59, R37, R35

Bells: YR27, YR23, Y15, Y11, Y00

Tree Branch and Pines: E29, E25, E23, G49

Snow: BV20, B0000, Colorless Blender, Gelly Roll Sakura #10 Pen, Stickles – Crystal

Sky: B04, B02, B01, B00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Carolers – Joy To The World!!

Nov8

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps Carolers – TT011 for the main image and Joy to the World – GLL012, for the sentiment. Seeing these carolers reminds me of my younger days when we would go visiting and sing Christmas carols at our cousins and our parent’s friends’ houses.

To make my card this week, I began with a card base from Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards). Using my Cuttlebug and paper from Crafter’s Companion – Luxury Cardstock – Ice Blue Pack, I die cut the snowflake border with Lawn Fawn – Snowflake Border die cuts. Using the same paper, I cut a thin strip .25″ x 5.5″. With Lawn Fawn – Sparkle Cardstock in “Pixie Dust”, I cut a strip 1″ x 5.5″. Using double-sided tape, I attached the 1″ strip directly onto the base card. I ran the other strip through my Xyron Create a Sticker and attached it to the card next to the 1″ strip. I added liquid glue to the backs of each of the snowflakes for the snowflake border and adhered them over top of the larger strip. Tim Holtz Distress Inks – Tumbled Glass and a finger dauber were used to ink around all of the edges of the card.

With my Cuttlebug and dies from My Favourite Things – Die-namics – Elegant Rectangle Stax, I die cut a large rectangle out of Copic Marker X-Press It Blending Card cardstock. The image was stamped onto the die cut using my MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. I coloured in the image and then added the snow in the sky using a Gelly Roll Sakura #10 Pen. Cosmic Shimmer Fluffy Stuff was added to the trim of the girl’s jacket and then heat set with a Marvy Uchida – Embossing Heat Tool to puff it up. Crystal – Stickles was added on top of this and also along her dress hem. DecoArt Snow-Tex sprinkled with DecoArt Glamour Dust and a spatula were used to create the snow on the bottom of the image. Crystal – Stickles was added to add some extra sparkle and give some highlights. Wink of Stella – Clear was added on top of the music books. The sentiment was stamped onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Northern Pine ink. It was then die cut using my Cuttlebug and Poppystamps – Christmas Quotes dies. Tim Holtz Distress Ink – Rustic Wilderness was used to ink around the edges. I added U-Line double-sided tape to the back of the sentiment and finished image and popped them both up onto the card. Lastly, I added Ranger – Snowflake Glitter with liquid glue to finish it off.

Card Recipe:

Stamps: Carolers – TT011 (High Hopes Rubber Stamps)

Sentiment: Joy to the World – GLL012 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness, Memento – Northern Pine, Tim Holtz Distress Inks – Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Recollections – Winter 4.25″ x 5.5 (Assorted Box of Cards), Crafter’s Companion – Luxury Cardstock – Ice Blue Pack, Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Die Cuts: My Favourite Things – Die-namics – Elegant Rectangle Stax – MFT-1268, Lawn Fawn – Snowflake Border (#LF2431), Poppystamps – Christmas Quotes

Snow: DecoArt Snow-Tex, DecoArt Glamour Dust, Crystal – Stickles

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cosmic Shimmer Fluffy Stuff, Crystal – Stickles, DecoArt Glamour Dust, Cuttlebug, Marvy Uchida – Embossing Heat Tool, Xyron Create a Sticker, Ranger – Snowflake Glitter

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R24, R21 (Eyes: Gelly Roll Sakura #10 Pen, Sakura Glaze – Black)

Hair: E15, Y38, Y21, YR23, E47, E44, E43, E42

Boy Mitts, Scarf and EarMuffs: BG09, BG05, BG02, BG01

Boy Jacket: R59, R37, R35

Boy Jeans: B26, B23, B21

Boy Boots: E27, E25, E23, E21,

Girl’s Coat and Boots: BG72, BG57, BG32, BG11, Cosmic Shimmer Fluffy Stuff, Crystal – Stickles

Girl Dress and Leggings: YG67, YG63, YG61, G19, G16, G14, Crystal – Stickles, Gelly Roll Sakura #10 Pen

Girl EarMuffs and Mittens: YG67, YG63, YG61

Song Books: YR23, Y15, Y11, Y00, Wink of Stella – Clear

Bird: R46, R14, R08

Cat: T9, T7, T5, T4, R01

Dog: E37, E35, E33, R24

Sky: B99, B97, B95, B93

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

North Pole Greetings!!

Nov2

It’s Wednesday, and this week, I made a Christmas card using High Hopes Rubber Stamps North Pole Penguin – TDG008 for the main image and Seasons Greetings – F300A, for the sentiment. Christmas is getting nearer and this little penguin is helping Santa deliver some of your presents this year!

To make my card this week, I began with a card base from Crate Paper – Boxed Cards – Mittens & Mistletoe (5.5″ x 4.25″). Tim Holtz Distress Ink – Rustic Wilderness and a finger dauber were used to ink around all of the edges. With my Cuttlebug and dies from My Favourite Things – Die-namics – Elegant Rectangle Stax, I die cut a large rectangle out of Forever In Time – Texture Rouge paper and a smaller one out of Copic Marker X-Press It Blending Card cardstock. U-Line double-sided tape was added to the large rectangle and it was popped up onto the base card.

The image was stamped onto the smaller rectangle using my MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. I coloured in the image and then with a paint brush and a small mixture of DecoArt Glamour Dust, FolkArt – Extreme Glitter Acrylic Paint and Delta Ceramcoat – White, I added in the first layer of snow. A little more DecoArt Glamour Dust was added to it while it was still wet. This dried pretty quickly and Cosmic Shimmer Fluffy Stuff and more glitter were added to give the snow some texture. I also added this to the hat, pompom and sign. Lastly, I added some Crystal – Stickles because you can never have enough glitter. LOL! Wink of Stella – Clear was added to the bows, side of the ball on the pole and down the entire pole. Pental Sunburst Metalic Med Gel Pen – Gold and Wink of Stella – Clear were added to the pink present dots. Once everything was dry, I stamped the sentiment using my MISTI and VersaMark ink. Ranger Embossing Powder White – Extra Fine Detail was applied over top of the ink and then heat embossed with Marvy Uchida – Embossing Heat Tool. The snow in the sky was created using a Gelly Roll Sakura #10 Pen. I applied U-Line double-sided tape to the back of the image and popped it up on top of the larger rectangle. To complete my card, I added in 4 YNS – Holly Jolly Sparkly Gumdrops in the corners.

Card Recipe:

Stamps: North Pole Penguin – TDG008 (High Hopes Rubber Stamps)

Sentiment: Seasons Greetings – F300A (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Rustic Wilderness, VersaMark

Paper: Copic Marker X-Press It Blending Card, Crate Paper – Boxed Cards – Mittens & Mistletoe (5.5″ x 4.25″), Forever In Time – Texture Rouge

Die Cuts: My Favourite Things – Die-namics – Elegant Rectangle Stax – MFT-1268

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Cosmic Shimmer Fluffy Stuff, Crystal – Stickles, Pental Sunburst Metalic Med Gel Pen – Gold, DecoArt Glamour Dust, FolkArt – Extreme Glitter Acrylic Paint, Delta Ceramcoat – White, Cuttlebug, Wink of Stella – Clear, Marvy Uchida – Embossing Heat Tool, YNS – Holly Jolly Sparkly Gumdrops

Image coloured with Copic Markers:

Penguin: W9, W7, W5, W3, W00, E15, YR14, Y17, Y11, RV00, EE42, E41, E40, Colorless Blender (Eyes: Gelly Roll Sakura #10 Pen, Sakura Glaze – Black)

Hat, Scarf, Sign and Ribbon: R59, R37, R35

Presents: BG72, BG57, BG32, BG11, YR24, YR23, YR21, YR08, YG07, YG05, YG03, RV14, RV13, RV10

Pole: R46, R14, R08, C1, C00, Colorless Blender

Sky: B99, B97, B95, B93

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Daffodils and Tulips!

Jun17

Sharing a sympathy card I made today using KLM Digital Design –  Milk Can – Daffodils and Tulips from the new June 2022 release. This image also comes with 2 more sentiments, “Thanks for all you do” and “Kindness changes everything”.

I imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers. I added some Crystal – Stickles to the little dots.  U-Line double-sided tape was added to the back of the image. This was then popped up onto Hammermill – Premium Colour 100 lb. cardsstock cardbase of 5.5″ x 4.25″.

Stamp and Sentiment:  Milk Can – Daffodils and Tulips – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Dies: My Creative Time – Rectangle Frame Layers

Miscellaneous: U-Line – 2 sided tape, Anna Griffin Empress Mini Machine, Crystal – Stickles

Image coloured with Copic Markers:

Daffodil: Y17, Y15, Y11, YR18, YR16, YR15

Tulips: V17, V15, V12, V09, V06, V04, V01, BV04, BV02, BV01

Leaves: G28, G19, G17, G16, YG67, YG25, YG11

Milk Can: W7, W5, W3, W1, W00

Shadow: E53, E50, E23

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Happy Bird Day!

Jun3

It’s Wednesday, and this week, I used Party Girl Florence – S098 (High Hopes Rubber Stamps) for the main image and Happy Bird Day – F098 (High Hopes Rubber Stamps) for the sentiment. Florence is all dolled up and ready for a Bird Day party! She’s the centre of attention with all of her bling, balloons, party hat and musical whistle. She’s also has some fancy moves in store for the Flamingo party dance! LOL!

To make my card this week, I started off with a white card base of 6″ x 6″. For the background paper, I used Forever in Time – Flamingo – Perfect Prints. I coloured the little party hats onto the Flamingos using PrismaColor Premier Pencils. Then I added some white pearls around their necks with Sharpie Water Based Paint – White – Extra Fine Point. Lastly, I edged around the paper with Tim Holtz Distress Ink – Cracked Pistachio.

I used my Cuttlebug and My Creative Time – More Stitched Circles MCT-D136 to die cut Copic Marker X-Press It Blending Card Stock and then my MISTI and Memento – Tuxedo Black ink to stamp the image. I coloured in the image with Copic markers and then used Lifestyle Crafts Cutting Dies – Nesting Circles to cut out the pink and aqua circles. I ran the coloured image through a Xyron Creative Station to make it into a sticker and then mounted it onto the pink cardstock. Then I popped up this piece and the aqua circle with 3M VHB – 2 sided tape. I went around the edge of the pink circle with Hibiscus – Stickles and used Crystal – Stickles for the necklace around Florence’s neck.

I stamped the sentiment onto Yellow cardstock and the ran it through my Xyron Create a Sticker. I mounted that onto some pink cardstock and then popped up this piece and the aqua cardstock with 3M VHB – 2 sided tape. I went around the pink cardstock with Hibiscus Stickles. To finish off the card, I added some Crafts – pop dots.

Card Recipe:

Stamp:  Party Girl Florence – S098  (High Hopes Rubber Stamps)

Sentiment: Happy Bird Day – F098 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Cracked Pistachio

Paper: Copic Marker X-Press It Blending Card, Forever in Time – Flamingo – Perfect Prints (6″x6″\15cmx15cm)

Die Cuts: Lifestyle Crafts Cutting Dies – Nesting Circles, My Creative Time – More Stitched Circles

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Xyron Creative Station, Xyron Create a Sticker, Sharpie Water Based Paint – White – Extra Fine Point, Hibiscus – Stickles, Crystal – Stickles, Crafts – Pop Dots

Image coloured with Copic Markers:

Flamingo: RV09, RV06, RV04, RV00, RV000, C5, C8, PrismaColor Premier White Pencil

Balloons: RV19, RV17, RV09, RV000, Y15, Y08, Y04, Y00, PrismaColor Premier White Pencil

Hat: B29, B26, B16

Hats on Background Paper: PrismaColor Premier Pencils – PC905 (Aquamarine), PC1006 (Parrot Green), PC1002 (Yellowed Orange), PC994 (Process Red)

Water and Sky: BG13, BG11, BG10, BG01, B01, B00, B000, B0000

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.