Tag Archive | #Your Next Stamp

My Cup of Tea


Coffee Loving Cardmakers is currently hosting the 2020 Fall / Winter Coffee Lovers Blog Hop! For my third entry into this hop, I chose the adorable stamp You’re a Squeak Heart  (Kraftin’ Kimmie Stamps) and die cut from My Creative Time – You Deserve A Break (Retired).

The image was coloured with copic markers. I coloured in the image and then fussy cut around it. For the tea cup die, I folded the base cardstock in half and then put the My Creative Time – You Deserve A Break die slightly over the edge. I die cut the cup once again, this time using the paper from Your Next Stamp – The Perfect Blend Designer Paper. I edged around the tea cup with Tim Holtz Distress Ink – Evergreen Bough. Then I glued the background paper on top of the base and also glued on the other tea cup die cuts.

For the little tag, I first stamped the sentiment with Versa Fine – Onyx Black and then embossed it with Ranger – Clear Super Fine Detail embossing powder. This was then heat set with Marvy Uchida – Embossing Heat Tool. I then cut the tags using My Creative Time – Little Gift Tags (Retired) die cuts. Lastly, the sentiment and coloured image were popped up using 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment: You’re a Squeak Heart (Kraftin’ Kimmie Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Versa Fine – Onyx Black

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Your Next Stamp – The Perfect Blend (6″ x 6″), Green and White cardstock

Die Cut: My Creative Time – You Deserve A Break (Retired), My Creative Time – Little Gift Tags (Retired)

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Mouse: W7, W5, W3, RV14, RV13

Tea Cup and Tea: E35, E34, E33, BG15, BG13, BG11

Hope you like it and have a great week!

Make it Rain!


Sharing a fun birthday card that I made for my husband this week using Make It Rain – CYNS728 (#YourNextStamp) for the main image and sentiment. I thought it would be fun to put the image inside a balloon too! Now if only that could be Lottery Winnings he was holding onto. LOL!

To make my card this week, I started out with a simple lime green card base, sized at 5.5″ x 4.25″.  For the bottom layer I used Hammermill – Premium Colour 100 lb. paper and multiple Tim Holtz inks which I have listed below. Then I die-cut the top layer with my Cuttlebug and #Your Next Stamp – Confetti Panel Die. Hammermill paper was used for this also. I mounted the bottom layer directly onto  the base card and then attached the top die-cut layer using 3M VHB – 2 sided tape.

For both of the sentiments, I used my MISTI, VeraMark ink and Ranger Embossing Powder White – Extra Fine Detail on black cardstock. Then a Marvy Uchida – Embossing Heat Tool was used to heat emboss the powder.

The balloon was die cut using My Creative Time – Stitched Circle Balloon Dies MCT-D137 to cut Copic Marker X-Press It Blending Card which I then stamped the main image onto using Memento – Tuxedo Black ink and my MISTI. The image was coloured with Copic Markers.

To assemble the remainder of the card, the image and sentiment were popped up on top with 3M VHB – 2 sided tape. Some ribbon was tied to the bottom of the balloon and some Kraftin’ Kimmie dots were used.

Card Recipe:

Stamp and Sentiment: Make It Rain – CYNS728 (#YourNextStamp)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Barn Door, Tim Holtz Distress Ink – Carved Pumpkin, Tim Holtz Distress Ink – Crushed Olive, Tim Holtz Distress Ink – Mermaid Lagoon, Tim Holtz Distress Ink – Mustard Seed, Tim Holtz Distress Ink – Spiced Marmalade, Tim Holtz Distress Ink – Twisted Citron, Versamark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Die Cuts: My Creative Time – Stitched Circle Balloon Dies MCT-D137, My Creative Time – Rectangle Frame Die Layers – MCT-D274Your Next Stamp – Confetti Panel Die – YNSD770

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, American Crafts – Premium Ribbon, Marvy Uchida – Embossing Heat Tool, Kraftin’ Kimmie Dots

Image coloured with Copic Markers:

Dog: E33, E31, E29, E27, E25, E23, R89, R59, R39, R37, R35, R24, C0, Sakura Glaze – Black, Gelly Roll Sakura #8 Pen

Money: G99, G94, G21, G82, YG05, YG04

Balloon: BG09, BG07, BG05, BG000

Hope you like it and have a fantastic week!

 

 

BBQ King


Sharing a birthday card I made using Good In The Woods Accessories and Good in the Woods (Kraftin’ Kimmie Stamps) for the images. A friend of mine is a BBQ King and has won multiple awards for his prowess at BBQing. I thought these stamps matched him perfectly.

To make the card I started with a base of 5.5″ x 4.25″ white cardstock. Next, I cut the background paper from Your Next Stamp Designer Paper Pad – For the Boys at the same size. I adhered it to the base with double-side tape and then edged around the entire card with Kraftin’ Kimmie – Stormy Sky ink.

I die-cut Copic Marker X-Press It Blending Card using my Cuttlebug and Your Next Stamp – Stitched Rectangle Die Set. I stamped the images onto the die cut using my MISTI and Memento – Tuxedo Black Ink. Next I coloured in the image with Copic Markers and then ran it through my Xyron Creative Station. I adhered this to some red cardstock and created a thin border around it. Lastly, I popped up the image using 3M VHB – 2 sided tape and applied it on top of the background paper.

Card Recipe:

Stamps:  Good in the Woods Accessories (Kraftin’ Kimmie Stamps), Good in the Woods (Kraftin’ Kimmie Stamps)

Inks: Memento – Tuxedo Black, Kraftin’ Kimmie – Stormy Sky

Paper: Copic Marker X-Press It Blending Card, Your Next Stamp Designer Paper Pad – For the Boys – 6″ x 6″

Die Cuts: Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Stencil: Kraftin’ Kimmie – Wonderful Waves

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Xyron Creative Station

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Hair: E29, E25, E21

Apron and Shoes: E37, E35, E33

Shirt: YG95, YG991, E52, E51, E50

Socks: C1, C0, Colorless Blender

BBQ and Meat: Y08, R24, YR16, E99, E97, E35, E19, E18, E17, E15, E09, E08, R39, R37, R24, C10, C7, C4

Spatula: C5, C3, C1, E55, E53, E51

Sky: B02, B01, B00, B000, Colorless Blender

Lawn: YG17, YG13, YG03, YG01

Hope you like it and have a great week!

Eek! You’re How Old???


Today I’m sharing a birthday card that I made for my sister-in-law whose nickname is “Kitty”. I have a lot of fun trying to come up with new creations with cats for her birthday each year. This year, I decided to use Going Catty – DP1021 (Clearly Whimsy Stamps), for my main image on the front of the card. Shown below is how it looked before I placed the die cut from Peek A Boo Poppers (YNSD219) – (#Your Next Die) over top of it.

To create the die-cut, I first used Lifestyle Crafts Cutting Dies – Nesting Circles to cut out the main image and then again to cut out the pop-out die cut using Echo Park Paper Co. – Imagine That. I then added glue all around the outside of the circle and glued the two pieces together as shown below.

I created a card base 5.5″ x 4.25″ and then mounted paper from Doodle Bug Designs Inc. – Sugar Shoppe. I popped up the circle previously cut out with 3M VHB – 2 sided tape. I used the sentiment from the same Whimsy Stamp Set. I embossed it using VersaMark and Ranger Embossing Powder White – Extra Fine Detail. Then I cut it out using Ribbon End Dies – My Creative Time. Lastly, I edged around all of the edges using Tim Holtz Distress Ink – Picked Raspberry. Shown below is the card with the pop-up closed.

This is the front of the card with the pop-up open.

On the inside of the card, I used the image from Birthday Critters – 30-466 (Penny Black) and sentiment from
Whatnot Sentiments Set Twelve – CYNS638 (#Your Next Stamp).

All images were stamped onto Copic Marker X-Press It Blending Card using Memento – Tuxedo Black ink and my MISTI.

Card Recipe:

Stamps: Going Catty – DP1021  (Clearly Whimsy Stamps), Birthday Critters – 30-466 (Penny Black)

Sentiment: Going Catty – DP1021 (Clearly Whimsy Stamps), Whatnot Sentiments Set Twelve – CYNS638 (#Your Next Stamp)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Versa Fine – Onyx Black, VersaMark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Echo Park Paper Co. – Imagine That 6″ x 6″

Die Cuts: Peek A Boo Poppers (YNSD219) – (#Your Next Die), Ribbon End Dies – My Creative Time, Lifestyle Crafts Cutting Dies – Nesting Circles

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Cats: W9, W8, W6, W5, R30, R27, R24, R22, R02, Sakura Glaze – Black

Party Hat and Birthday Banner: BG13, BG11, YR16, YR12, RV66, RV63, Y17, Y08, BG05, BG02

Background: BG13, BG11, BG10

Hope you like it and have a great week!

You can find more cards to inspire you at Roberta Stevenson on my Facebook page.

Birthday Wishes!


Today I’m sharing a birthday card that I made for my mom using Yummy Cupcake Bunny (CYNS592) (#Your Next Stamp) on the front of the card and  Rosie Rabbit Gift (CYNS542) (#Your Next Stamp) on the inside of the card.

On the inside:

To make the card I stamped the images on to Copic Marker X-Press It Blending Card using Memento – Tuxedo Black and my MISTI – Most Incredible Stamping Tool to get a nice clean crisp image. After colouring the images, I fussy cut around them both. I then used My Creative Time – Scalloped Stitched Oval Dies to die cut an oval out of Doodle Bug Designs Inc. – Sugar Shoppe paper. I cut the remainder of the paper to be 4″ x 5.25″ and turned it over to the opposite side and mounted it onto a card base of 4.25″ x 5.5″. I used Tim Holtz Distress Ink – Picked Raspberry to ink around the edges.

For the sentiments I used Versa Fine Onyx Black and VersaMark ink and then embossed both with Ranger embossing powders listed below.

To complete the card, I mounted the bunny on the front with 3M VHB – 2 sided tape to pop it up as well as the sentiment.

Card Recipe:

Stamp and Sentiment: Yummy Cupcake Bunny (CYNS592) (#Your Next Stamp), Rosie Rabbit Gift (CYNS542) (#Your Next Stamp)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Versa Fine – Onyx Black, VersaMark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Hot Pink cardstock

Die Cuts:  My Creative Time – Scalloped Stitched Oval Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Bunnies: E29, E27, E25, E23, R30, R02, R85, R83

Cupcake and Wrapper: BG18, BG15, BG11, BG10, YR18, YR16, RV09, RV04, RV02, RV00, E35, E33, E31

Presents and Ribbons: BG18, BG15, BG11, BG10, YR18, YR15, Y06, Y04, Y02, RV04, RV02, RV00

Background: B04, B02, B00

Hope you like it and have a great week!

You can find more cards to inspire you at Roberta Stevenson on my Facebook page.