Tag Archive | My Creative Time

Little Cup of Cocoa


Coffee Loving Cardmakers is currently hosting the 2020 Fall / Winter Coffee Lovers Blog Hop! For my Fourth entry into this hop, I chose this loveable snowman in a hot tub of Cocoa called Snow Yummy – S182  by High Hopes Rubber Stamps. For the sentiments I used High Hopes Rubber Stamps, Cup of Cocoa – M009 and Holiday All Year – H200.

The image was stamped with Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card using my MISTI to give me a nice clean image. The image was coloured with copic markers and then I fussy cut around it. I used a black marker to go around all of the edges where I had cut out the image.

I cut Hammermill – Premium Colour 100 lb. paper to be 4.25″ x 11″. Then I scored the paper at 5.5″ and again at 8.25″. (2.75″ from the original score line). I cut another piece of the cardstock at 4.25″ x 5.5″ to be the front panel. I then cut Stampin’ Up – Snowflake Splendor Designer Series Paper to be 4.25″ x 5″ and used double-side tape to place it directly to the front panel piece. Hot Buy Craft Smart – Holiday Glitz Glitter Paper was used to create the snow. I cut it 4.25″ wide and then just tore a piece across the width to create the shape. I used double-sided tape to adhere this directly to the bottom of the front panel.

The sentiments were then added with Versa Fine – Onyx Black and embossed with Ranger – Clear Super Fine Detail embossing powder. This was then heat set with Marvy Uchida – Embossing Heat Tool. To create the rectangles, I used  My Creative Time – Rectangle Frame Layers  for the patterned paper and My Creative Time – Rectangle Frame Dies for the background rectangle using Hot Buy – Recollections – Jewel Tones. Next, I ran the small sentiment and the coloured image through my Xyron Creative Station to create stickers out of them. This made it easer to adhere the larger image to the background and the smaller sentiment to the larger rectangle.

The card was now ready to assemble. I applied double-sided tape to only the lower half of the scored card and then placed the finished scene panel onto it. I cut another piece of patterned paper at 4-1/8″ x 3″ and adhered it the lower half of the inside card. Then I popped up the sentiment using 3M VHB – 2 sided tape. I added some Wink of Stella – Clear  to the snowman to make him sparkle and Gelly Roll Stardust – Clear and the Wink of Stella – Clear to the large snowflake on the mug. Lastly, I added some Stickles – Diamond to add some texture to the snow.

Card Recipe:

Stamp: Snow Yummy – S182 (High Hopes Rubber Stamps)

Sentiments: Cup of Cocoa – M009 (High Hopes Rubber Stamps)Holiday All Year – H200 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Stampin’ Up – Snowflake Splendor Designer Series Paper, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″

Die Cuts: My Creative Time – Rectangle Frame Layers, My Creative Time – Rectangle Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Xyron Creative Station, Wink of Stella – Clear, Stickles – Diamond

Image coloured with Copic Markers:

Snowman: B60, BG000, YR18, YR14, Y08, C9, N8, N5, R30, R27, R24, R22, R20, Colorless Blender, Wink of Stella – Clear

Mug and Hot Cocoa: E23, E25, E27, B37, B14, B12, Wink of Stella – Clear and Gelly Roll Stardust – Clear

Hat and Scarf: C9, C7, C5, R59, R39, R37, R35

Hope you like it and have a great week!

My Cup of Tea


Coffee Loving Cardmakers is currently hosting the 2020 Fall / Winter Coffee Lovers Blog Hop! For my third entry into this hop, I chose the adorable stamp You’re a Squeak Heart  (Kraftin’ Kimmie Stamps) and die cut from My Creative Time – You Deserve A Break (Retired).

The image was coloured with copic markers. I coloured in the image and then fussy cut around it. For the tea cup die, I folded the base cardstock in half and then put the My Creative Time – You Deserve A Break die slightly over the edge. I die cut the cup once again, this time using the paper from Your Next Stamp – The Perfect Blend Designer Paper. I edged around the tea cup with Tim Holtz Distress Ink – Evergreen Bough. Then I glued the background paper on top of the base and also glued on the other tea cup die cuts.

For the little tag, I first stamped the sentiment with Versa Fine – Onyx Black and then embossed it with Ranger – Clear Super Fine Detail embossing powder. This was then heat set with Marvy Uchida – Embossing Heat Tool. I then cut the tags using My Creative Time – Little Gift Tags (Retired) die cuts. Lastly, the sentiment and coloured image were popped up using 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment: You’re a Squeak Heart (Kraftin’ Kimmie Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough, Versa Fine – Onyx Black

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Your Next Stamp – The Perfect Blend (6″ x 6″), Green and White cardstock

Die Cut: My Creative Time – You Deserve A Break (Retired), My Creative Time – Little Gift Tags (Retired)

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Mouse: W7, W5, W3, RV14, RV13

Tea Cup and Tea: E35, E34, E33, BG15, BG13, BG11

Hope you like it and have a great week!

Hug in a Mug!


Coffee Loving Cardmakers is currently hosting the 2020 Fall / Winter Coffee Lovers Blog Hop! For my second entry into this hop, I chose the adorable stamp from (My Creative Time) called Cute Mugs – MCT326. 

To create this card, I first used my Cuttlebug and My Creative Time – Bunch of Fun Circle Dies to cut Copic Marker X-Press It Blending Card paper. The image was stamped onto the die-cut with Memento – Tuxedo Black using my MISTI – Most Incredible Stamping Tool to get a nice clean image. I coloured in the image with Copic markers and then stamped the image again on the same paper that I used for the background and fussy cut around the tea-cup piece. I used a black marker to go around the edges and then paper-pieced it into place using some glue. I die cut the sign using Spellbinders – Shapeabilities S4-322 Grommet Tags and also the background circle using some scrap yellow paper. The sentiment was then stamped on using Versa Fine – Onyx Black ink and Ranger – Clear Super Fine Detail Embossing Powder was applied on top. Then, I used Marvy Uchida – Embossing Heat Tool to heat emboss the powder. I also die cut some red hearts with the die-cut that came with the stamp set.

I cut the background pattern from My Mind’s Eye – Lost and Found paper and then used Tim Holtz Distress Ink – Antique Linen to go around the edges. I also used this ink to go around all of my other die cuts.

The card was now ready to assemble. I adhered the background to a base card of 6″ x 6″. Then using 3M VHB – 2 sided tape, I popped up the 2 circles and sign. I added a couple of brads to the sign before adding the tape. I ran the hearts through my Xyron Create a Sticker to make them into stickers and added them around the kitty to complete my card.

Card Recipe:

Stamp: Cute Mugs (My Creative Time)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Antique Linen

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., My Mind’s Eye – Lost and Found

Die Cuts: My Creative Time – Bunch of Fun Circle Dies

Embossing Powder: Ranger – Clear Super Fine Detail

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape, Xyron Create a Sticker

Image coloured with Copic Markers:

Kitten: C9, C7, C5, C3, 100, R30, R20

Mug and Saucer: E53, E51, E50, Atayou Spica – Gold 11, Paper-Piercing – My Mind’s Eye – Lost and Found

Saucer: BG15, BG11, BG10, BG000

Spoon and Cocoa: C5, C3, C1, E39, E37, E35

Marshmallows and Whipped Cream: C1, C0, Y32, Y23, Y21, Colorless Blender

Hope you like it and have a fantastic week!

Entered into these challenges:

2020 Fall / Winter Coffee Lovers Blog Hop! #fallwinter2020clh

Define Naughty!


Hi Everyone! I’m participating in the 2020 Cat Lovers Blog Hop (#2020CatLoversHop) this year.

This is my third year joining the fun event. For six years, Her Peaceful Garden has been sponsoring The Cat Lover’s Blog Hop and it is a lot of fun.

This year, I created a Christmas card using  Callie Christmas Kitty – R096 (High Hopes Rubber Stamps) for the main image and Define Naughty – FLL004 (High Hopes Rubber Stamps) for the sentiment. I just love this adorable stamp and it reminds me so much of how my cats used to love playing with the Christmas tree ornaments every year. We definitely learned our lesson after the first time, 2 of our little babes as kittens decided it would be fun to take down the entire tree. After that happened, all ornaments put on the tree were unbreakable and cat friendly. LOL!

To make my card, I started with a base of 6″ x 6″. I cut some Recollections – Cranberry cardstock to the same size and attached it directly to the base. For the main background, I used my Cuttlebug and Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B to die cut Recollections – Christmas Pets paper. I inked around all of the edges with Tim Holtz Distress Ink – Weathered Wood and applied it to the base using 2-sided tape.

For smaller background Recollections – Cranberry cardstock was used and Copic Marker X-Press It Blending Card paper for the main image. I used My Creative Time – Rectangle Frame Dies and My Creative Time – Rectangle Frame Layers die cuts. Copic Markers were used for the main image. Once the image was coloured, I stamped the sentiment using Versa Fine – Onyx Black and applied Ranger – Clear Super Fine Detail embossing powder which I heat set with Marvy Uchida – Embossing Heat Tool.

To complete the card, I attached the main image to the red backing with 2-sided tape. Then I popped up the small background with 3M VHB – 2 sided tape. I applied Diamond Stickles all around the frame of the image and added a little green bow and some pop-dots to finish off the card.

Card Recipe:

Stamp:  Callie Christmas Kitty – R096 (High Hopes Rubber Stamps)

Sentiment Background: Define Naughty – FLL004 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Weathered Wood, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Pets, Recollections – Cranberry cardstock

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers, Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Diamond Stickles, Marvy Uchida – Embossing Heat Tool

Images coloured with Copic Markers:

Kitten: C7, C5, C4, C3, RV02, Sakura Glaze – Black

Tree Branches: G29, G28, YG95,

Bobbles: B06, B05, B02, RV19, RV17, RV02, RV000, Gelly Roll Stardust – Clear

Candy Canes: R59, R39, R37, R35, C1, C0, Colorless Blender

Background: BG72

Hope you like it and have a fantastic week!

 

Eek! You’re How Old???


Today I’m sharing a birthday card that I made for my sister-in-law whose nickname is “Kitty”. I have a lot of fun trying to come up with new creations with cats for her birthday each year. This year, I decided to use Going Catty – DP1021 (Clearly Whimsy Stamps), for my main image on the front of the card. Shown below is how it looked before I placed the die cut from Peek A Boo Poppers (YNSD219) – (#Your Next Die) over top of it.

To create the die-cut, I first used Lifestyle Crafts Cutting Dies – Nesting Circles to cut out the main image and then again to cut out the pop-out die cut using Echo Park Paper Co. – Imagine That. I then added glue all around the outside of the circle and glued the two pieces together as shown below.

I created a card base 5.5″ x 4.25″ and then mounted paper from Doodle Bug Designs Inc. – Sugar Shoppe. I popped up the circle previously cut out with 3M VHB – 2 sided tape. I used the sentiment from the same Whimsy Stamp Set. I embossed it using VersaMark and Ranger Embossing Powder White – Extra Fine Detail. Then I cut it out using Ribbon End Dies – My Creative Time. Lastly, I edged around all of the edges using Tim Holtz Distress Ink – Picked Raspberry. Shown below is the card with the pop-up closed.

This is the front of the card with the pop-up open.

On the inside of the card, I used the image from Birthday Critters – 30-466 (Penny Black) and sentiment from
Whatnot Sentiments Set Twelve – CYNS638 (#Your Next Stamp).

All images were stamped onto Copic Marker X-Press It Blending Card using Memento – Tuxedo Black ink and my MISTI.

Card Recipe:

Stamps: Going Catty – DP1021  (Clearly Whimsy Stamps), Birthday Critters – 30-466 (Penny Black)

Sentiment: Going Catty – DP1021 (Clearly Whimsy Stamps), Whatnot Sentiments Set Twelve – CYNS638 (#Your Next Stamp)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Picked Raspberry, Versa Fine – Onyx Black, VersaMark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Sugar Shoppe – 6″ x 6″ paper pad, Echo Park Paper Co. – Imagine That 6″ x 6″

Die Cuts: Peek A Boo Poppers (YNSD219) – (#Your Next Die), Ribbon End Dies – My Creative Time, Lifestyle Crafts Cutting Dies – Nesting Circles

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Cats: W9, W8, W6, W5, R30, R27, R24, R22, R02, Sakura Glaze – Black

Party Hat and Birthday Banner: BG13, BG11, YR16, YR12, RV66, RV63, Y17, Y08, BG05, BG02

Background: BG13, BG11, BG10

Hope you like it and have a great week!

You can find more cards to inspire you at Roberta Stevenson on my Facebook page.