Tag Archive | Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Paw-sitively Good!

Oct29

It’s day 5 of the 2022 Cat Lovers Hop and today I’m sharing a Christmas card I made using Your Next Stamp –  Meowy Christmas – CYNS681. Having so much fun with this amazing hop and look forward to it every year.

I created a 5.5″ x 4.25″ card base using Hammermill – Premium Colour 100 lb. cardstock. I cut the background to be the same size using My Favourite Things – Pawsome Prints paper and adhered it directly to the base using double-sided tape. Using my Cuttlebug, Creative Expressions – Festive Collection – Bold Snowflake Frame dies and Recollections – Blue Hues Shimmer Cardstock, I cut out the large snowflake and frame. Using some scrap dark blue paper, I die cut the large outline. I tore along the top of a small piece of Recollections – Christmas Inkjet Printable Glitter Paper and then die cut it with the larger cirlce die from the same die set. Using Tim Holtz Distress Ink – Faded Jeans and a finger dauber, the edges were inked all around the base card. With liquid glue, I attached the large snowflake to the background border. I then attached the snow piece that I had cut previously with liquid glue as well. Then, using a Gelly Roll Sakura #10 Pen, I coloured in some snow in the sky.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then I fussy cut around it. I added some U-Line double-sided tape to the image and popped it up into centre of the circle. The shadow was added using B52. The sentiments were both stamped onto the dark blue paper with VersaMark ink and then embossed with Ranger Embossing Powder White – Extra Fine Detail. I cut out the larger sentiment with my cutter and the smaller one using my Cuttlebug and Gina K Designs – Sentiment Strips. I attached U-line double sided tape the sentiments and coloured image frame and popped up everything onto the card base.

U-Line double-sided tape was applied to the backs of three Creative Impressions – Brads – Snowflake – Winter with a double layer. They were all popped up onto the card and then YNS Gumdrops – Firefly Magic Sparkly Gumdrops were applied to the centres to finish the card off.

Card Recipe:

Stamp and Sentiment:  Meowy Christmas – CYNS681 – Your Next Stamp

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Faded Jeans

Die Cuts: Creative Expressions – Festive Collection – Bold Snowflake Frame (CED3077), Gina K Designs – Sentiment Strips

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., My Favourite Things – Pawsome Prints (6″ x 6″), Recollections – Blue Hues Shimmer Cardstock (8.5″ x 11″), Dark Blue paper, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: U-Line – 2-sided tape, YNS Gumdrops – Firefly Magic Sparkly Gumdrops, MISTI (Most Incredible Stamping Tool), Creative Impressions – Brads – Snowflake – Winter, Marvy Uchida – Embossing Heat Tool, Gelly Roll Sakura #10 Pen

Image coloured with Copic Markers:

Cat and Envelope: T9, T7, T5, T4, T3, T1, R21, C1, C0, Colorless Blender

Halo: Y08, Y04

Shadow: B52

Hope you like it and have a great week!

Also entered into https://blog.yournextstamp.com/challenge-191-midnight-comment-for-the-chance-to-win/

 

Mistletoe Santa Gnome!!

Nov30

Today, I’m sharing another super adorable gnome from KLM Digital Designs November release called Mistletoe Santa Gnome. The image comes with 3 different sentiments, “Merry Christmas”, which I’ve used on my card and also, “Believe” and “ho-ho-ho”. This Santa gnome is out taking a stroll and enjoying the magic of Christmas and winter.

I decided to colour this Santa in non-traditional colours. To make the card, I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. I used my Brother Scan and Cut to cut around the image and coloured it in with Copic markers. Then I applied Nuvo Glitter Accents – Fresh Snowfall to the all of the trimming and set it aside to dry.

I used AC White paper to create the base shape of the card 6″ x 6″. Then I applied Stampin’ Up – Snowflake Splendor Designer Series Paper cut to the same size directly to the base. I had a spare cut-out from American Crafts – “Holiday” paper in which I had used My Creative Time -Stitched Squares Inside and Out to die cut the centre. I trimmed it a little bit on all sides to create a border. I took a small scrap of Recollections – Christmas Inkjet Printable Glitter Paper and tore it across the top to imitate snow caps. This I adhered to the back of the die-cut panel. Then, I glued the entire piece down on to the background. I also made sure that I didn’t use any glue towards the tops of the snow.

The sentiment was brought into Microsoft Word and I adjusted the width to be .95″. This allowed me to use the 1″ die from Lifestyle Crafts Cutting Dies – Nesting Circles to die cut the sentiment after it was printed out. I inked around the edges of the sentiment with Tim Holtz Distress Inks – Peacock Feathers and applied Clear – Wink of Stella over top of it to make it sparkle. The snowflakes were all die cut from Signature Collection by Sara Davies – Winter Wonderland Snowflake Quartet.

The remainder of the card was now ready to put together. I glued the Gnome directly to the background paper and moved it slightly under the snow. I added glue to each of the snowflakes and placed them directly onto the backgrounds. Lastly, I popped up the sentiment with 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment: Mistletoe Santa Gnome (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Peacock Feathers

Paper: Copic Marker X-Press It Blending Card, Stampin’ Up – Snowflake Splendor Designer Series Paper, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, American Crafts – “Holiday” 6 x 6 in. (15.2 cm x 15.2 cm)

Die Cut: My Creative Time -Stitched Squares Inside and Out, Lifestyle Crafts Cutting Dies – Nesting Circles, Signature Collection by Sara Davies – Winter Wonderland Snowflake Quartet

Tools: 3M VHB – 2 sided tape, Clear – Wink of Stella, Nuvo Glitter Accents – Fresh Snowfall, Gelly Roll Sakura #8 Pen, Cuttlebug

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W4, W3, W2, W1, W0, W00

Hat and Coat: BG49, BG18, BG15, BG13, BG11, Gelly Roll Sakura #8 Pen

Mitts: BG78, BG75, BG72

Holly, Pine Needles and Berries: R59, R35, G46, G43, G29, YG01, Gelly Roll Sakura #8 Pen

Hope you like it and have a great week!

Check out KLM Designs for some great savings this month.

Offer good until 12/07/20
25% OFF ALL PHOTOPOLYMER STAMPS
USE COUPON CODE: BLACKFRIDAY

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Musical Penguin Parade

Oct10

Hi There! Today I’d like to share a Christmas Card I made using Top Hat Penguin – RLF005 (High Hopes Rubber Stamps), Trumpet Penguin – RLF006 (High Hopes Rubber Stamps) and Flute Penguin – RLF002 (High Hopes Rubber Stamps). Musical Wishes – GLL014 (High Hopes Rubber Stamps) was chosen for the sentiment. I just love these adorable penguins and couldn’t resist putting them all together to create a musical penguin parade. LOL!

To make my card this week, I used Recollections – White cardstock for the base card which is 7.25″ x 7″. I scored the paper at 3.5″ to create the dimensions of 7.25″ x 3.5″. The red background was cut to the same size using Crafter’s Companion Luxury Cardstock – Red. The musical notes layer was cut from Craftsmart – Classic Village at 7″ x 3.25″. The snowy background was die cut to the same size in length using Recollections – Christmas Inkjet Printable Glitter Paper. I used My Creative Time – Tall Frame Dies, My Creative Time – Tall Frame Layers in order to achieve this. Once the snowy background paper was die cut, I tore along it in order to create the illusion of white snow drifts along the top of the snow. I adhered all of the layers with double-sided tape. Using my large Misti, I stamped the sentiment using Versa Fine – Onyx Black and embossed it with Ranger – Clear Super Fine Detail embossing powder. Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

I stamped all of the images onto Copic Marker X-Press It Blending Card using my Misti and Memento – Tuxedo Black ink. The images were then all coloured in with Copic markers and die cut using my Brother Scan and Cut machine. Then I ran all of the images through my Xyron Creative Station to make them all stickers. I placed them on the card and then used Stickles – Diamond to create some snow drifts. Clear – Wink of Stella was added to the Candy Cane to make it sparkle and also to all of the leaves and holly on the hats.

To complete the card, I edged all around the scene with Stickles – Sea Glass.

Card Recipe:

Stamp:  Top Hat Penguin – RLF005 (High Hopes Rubber Stamps), Trumpet Penguin – RLF006 (High Hopes Rubber Stamps), Flute Penguin – RLF002 (High Hopes Rubber Stamps)

Sentiment Background: Musical Wishes – GLL014 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, Hot Buy Craftsmart – Classic Village – 12″ x 12″ paper, Crafter’s Companion Luxury Cardstock – Red – 8.5 x 11″

Die Cuts: My Creative Time – Tall Frame Dies, My Creative Time – Tall Frame Layers

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug,  Xyron Creative Station, Stickles – Sea Glass, Stickles – Diamond, Clear – Wink of Stella, Marvy Uchida – Embossing Heat Tool

Images coloured with Copic Markers:

Penguin Bodies: W9, W7, W5, W3, E15, Y17, YR16, YR15, E43, E42, E41, E40, R11, RV00, Colorless Blender, White Prismacolor Premier Pencil

Top Hats: C9, C8, C6, C3

Scarfs and Hat Bands: BG78, BG75, BG09, BG07, BG02

Vest and Mouse: R59, R39, R37, R24, C3, C1

Horn and Flute: E97, E23, Y17, Y15, Y11

Holly and Leaves: YG97, YG95, YG01, G21, R39, R24

Bird: Y19, Y15, Y11, YR15

Candy Cane: R37, R35, C1, C0, Colorless Blender, Clear – Wink of Stella

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Sending Warm Hugs

Oct5

Sharing a card I made today for a challenge using Super Cool Pals  from Kraftin’ Kimmie Stamps. I really love anything Christmas and winter related and who couldn’t resist this adorable snowman and little fox?

To make my card, I started out by stamping the image using my MISTI and Memento Tuxedo Black ink onto Copic Marker X-Press It Blending Card. I coloured the image with Copic markers and then fussy cut around it. I die cut the background paper using My Creative Time – Rectangle Frame Dies. It’s from Stampin Up’, but I received it in a Mystery Box, so I’m not sure what paper pack it comes from. Then I tore up some Recollections – Christmas Inkjet Printable Glitter Paper and taped it to the bottom of the panel.

The snowflake was die cut using Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″ and Tim Holtz – Sizzix Thinlets – Paper Snow Flakes. I ran the paper and my finished coloured image through my Xyron Creative Station and also the Holiday Glitz paper was put through it as well before I die cut it. This allowed me to make stickers out of both items. For the sentiment, I used my MISTI, Versa Fine – Onyx Black and then embossed it with Ranger – Clear Super Fine Detail embossing powder. This was then heat embossed with my Marvy Uchida – Embossing Heat Tool. Once this was done, I die-cut the sentiment with Lifestyle Crafts Cutting Dies – Nesting Circles and edged all around it with Kraftin’ Kimmie – Lovely Lagoon Ink. I also edged all around the snowy background with the same ink.

For the assembly, I started out using the base from Recollections -Christmas Cards and Envelopes set at 5.5″ x 4.25″. Using double-sided tape, I  adhered the snowy background to the base. Then I added my main image and snowflake. The sentiment was popped up using some 3M VHB – 2 sided tape and Stickles – Diamond glitter was added to parts of the snow to finish the card off.

Card Recipe:

Stamp and Sentiment: Super Cool Pals (Kraftin’ Kimmie Stamps)

Inks: Memento – Tuxedo Black, Kraftin’ Kimmie – Lovely Lagoon Ink, Versa Fine – Onyx Black

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Recollections – Christmas Cards and Envelopes Set, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Die Cuts: Tim Holtz – Sizzix Thinlets – 661599 – Paper Snow Flakes, Lifestyle Crafts Cutting Dies – Nesting Circles, My Creative Time – Rectangle Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Marvy Uchida – Embossing Heat Tool, Stickles – Diamond, Xyron Creative Station

Image coloured with Copic Markers:

Fox: E99, E97, E15, E08, C2, C1, C0, R24, R02, R00

Snowman: C0, BV20, B000, R08, YR18, YR16, YR14

Vest: BG49, BG45, BG34, BG32

Hat and Flower: BG49, BG45, BG34, BG32, C10, C8, C6, R39, R37, R35, G07, G05

Scarf: G09, G07, G05, R59, R39, R37, R35

Hope you like it and have a great week!

Peace and Joy!!

Sep20

Today I’m sharing Candy Cane Corner Frame from KLM Digital Designs new September release. I decided to try something different with this image and printed it out on Recollections – Christmas Inkjet Printable Glitter Paper. Then it was coloured in with Copic Markers. This beautiful stamp comes with the Candy Cane image and 4 sentiments: “Peace & Joy”, “Season’s Greetings”, “Happy Holidays” and “Merry & Bright”.

Started out with a card base of 5.5″ x 4.25″. My Creative Time – Rectangle Frame Dies and My Creative Time – Rectangle Frame Die Layers – MCT-D274 were used to create the various layers. Creative Expressions – Craft Dies by Sue Wilson – Festive Collection – Holly and Berry Border were used to create the small holly and leaves in the right corners using my Cuttlebug and Crafts – Green Glitter Cardstock paper. The top layer was die-cut and then a ruler and craft knife were used to cut the top and bottom of the image.

I popped up all of the layers with 3M VHB – 2 sided tape, except for the bottom layer, which was applied with 2-sided tape.

Card Recipe:

Stamp and Sentiment: Candy Cane Corner Frame (KLM Digital Designs)

Inks: HP Printer Grayscale

Paper: Recollections – Christmas Inkjet Printable Glitter Paper – 8.5″ x 11″, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Crafts – Glitter Cardstock 02-3068425

Die Cuts: Creative Expressions – Craft Dies by Sue Wilson – Festive Collection – Holly and Berry Border, My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Die Layers – MCT-D274

Tools: 3M VHB – 2 sided tape,  Cuttlebug

Image coloured with Copic Markers:

Leaves: YG67, YG03, G99

Ribbon: BG18, BG15, BG11

Candy Cane: R59, R29, R24

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Walking in a Winter Wonderland

Dec15

Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a card with you that I made using DCS19089 – Mix and Match Clear Stamp  (Dreamerland Crafts Clear Stamps) for the main image and sentiment and 2018 Christmas Trees & Houses – M18312 (Dreamerland Crafts Clear Stamps) for the trees in the background! I thought this little bear was just so adorable, so I thought I would make him pulling his little forest friend on a little walk through the forest!

I used the centre die cut from Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background – CED3049 to cut out the area I wanted to stamp my image on. I used Copic Marker X-Press It Blending Card, Memento – Tuxedo Black ink and my MISTI to get a nice clean image. The first step was to stamp the bear, sled and bunny. Next I used Inkadoo Stamping Mask Paper and stamped the 3 images again. Next, I added the masked images over top of the images that were previously stamped on the base image.

The second step was to stamp in the trees. I wanted to give the impression that some trees were further back, so I inked the tree stamp with Memento – Bamboo Leaves and stamped once and then immediately again using the same stamp. I performed this several times across the background. Once all of the trees were in place, I removed the masking and was ready to colour in my images.

Before adding snow to the sky, I stamped on the sentiment using VersaMark ink and Ranger Embossing Powder White – Extra Fine Detail. Then I added in the snow flakes using Gelly Roll Sakura #8 Pen.

The colours used for each character and the trees are listed below. The final step for the main image was to add in some sparkle on the trees and snow on the ground. For the glitter on the trees I used Quickie Glue and DecoArt Glamour Dust. For the snow below the trees, sled and bear, I used VersaMark ink and WOW! Embossing Glitter – White Puff Twinkle and touches of Stickles – Diamond.

Lastly, I die cut the background frame using Recollections – Christmas Inkjet Printable Glitter Paper and Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background. I added glue to the back of the die cut and mounted it on top of Crafts Sparkling Stickers – 02-3068629. Then I popped up the main image in the centre using 3M VHB – 2 sided tape.

Card Recipe:

Stamps: 2018 Christmas Trees & Houses – M18312 (Dreamerland Crafts Clear Stamps), DCS19089 – Mix and Match Clear Stamp (Dreamerland Crafts Clear Stamps)

Sentiments: DCS19089 – Mix and Match Clear Stamp (Dreamerland Crafts Clear Stamps)

Inks: Memento – Tuxedo Black, Memento – Bamboo Leaves, Memento – Rich Cocoa, VersaMark ink

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, WOW! Embossing Glitter – White Puff Twinkle

Paper: Copic Marker X-Press It Blending Card, Crafts Sparkling Stickers – 02-3068629, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Die Cuts: Creative Expressions by Sue Wilson – Festive Collection – Pointsettia Mini Background – CED3049,

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Inkadoo Stamping Mask Paper, Stickles – Diamond

Image coloured with Copic Markers:

Bear: E57, E55, E53, E39, E37, E35, E34, R59, R37, R35, Sakura Glaze – Black (Nose and Eyes), Gelly Roll Sakura #5 Pen

Bunny: E57, E55, E53, E51, R20, R00, Sakura Glaze – Black (Eyes), Gelly Roll Sakura #5 Pen

Sleigh: R59, R37, R35, C3, C2, C1, E39, E37, E35

Trees: BG96, YG67, YG17, G21, G20, G00, G0000

Background Sky: B99, B97, B95, B93, B91

 

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Nordic Night Snowy Delight!

Dec11

Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and today I’m sharing a card that I made using the image Nordic Snowman with Bird (TLF010) (High Hopes Rubber Stamps) from our latest Christmas release. I just love the serenity of this image.  I grew up in Northern Canada and have always loved snow. It’s always so beautiful watching it come down from the sky. Not so much fun when you have to shovel it or drive through a snow storm, but other than that, it is quite beautiful! LOL! Did you grow up where there was a lot of snow too?

To make my card, I first stamped the image using Memento – Tuxedo Black ink onto Copic Marker X-Press It Blending Card. Then I ran the stamped image through my Cuttlebug and die cut it with Craftin Desert Diva’s Fancy Frames.

I decided to colour in the sky first with various blue Copic markers. After I coloured in the sky, I added in the falling snow using Gelly Roll Sakura #10 Pen.

I thought the sweater looked Scandinavian, so I decided to colour it similar to some Scandinavian  sweaters that I’ve seen in the past. I used Sakura Glaze – Black pen to pop up the eyes and smile on the snowman and lastly added some Stickles – Diamond for the pom-poms on the hat and along the top of the snow on the sweater. I also coloured over top of the black snowflakes with Gelly Roll Sakura #10 Pen and Gelly Roll Sakura #5 Pen on the sweater and hat.

For the snow at the bottom of the snowman, I used the same die-cut, Craftin Desert Diva’s Fancy Frames, to cut out the base using Recollections – Christmas Inkjet Printable Glitter Paper. I then ran this same paper through my Cuttlebug again, this time using the die cut from Lawn Fawn – Stitched Hillside Borders. Next I popped it up on the image using 3M VHB – 2 sided tape.

I die-cut some patterned paper using Your Next Stamp – Stitched Rectangle Die Set (YNSD214) that I had in my stash and then popped up the coloured snowman image onto it using 3M VHB – 2 sided tape.

For the sentiment I used Winter Delight (G114) (High Hopes Rubber Stamps). I stamped the sentiment and then die-cut it out using Craftin Desert Diva’s – Tag Essentials Dies. Then I went around the border of the die-cut with Gelly Roll Stardust – Clear pen and drew in some small snowflakes.

I then die-cut some snowflakes using Poppy – Simple Snowflakes (Style 1931) from Recollections – Christmas Inkjet Printable Glitter Paper. Once the snowflakes were all cut out, I ran them through my small Xyron to make them into stickers.

To assemble the card, I started with a base of 6″ x 6″ white AC cardstock. Next I mounted American Crafts – Wonderland Collection paper for my background. I chose this particular pattern as I thought it matched the image so well. I attached the mounted snowman directly to the background paper using 2-sided tape. I popped up my sentiment using 3M VHB – 2 sided tape. Added my snowflakes and then finished off the card by adding in little gems in the centre of each snowflake and 1 on the sentiment.

Card Recipe:

Stamp:  Nordic Snowman with Bird (TLF010) (High Hopes Rubber Stamps)

Sentiment:  Winter Delight (G114) (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, AC Cardstock – White,

Die Cuts: Poppy – Simple Snowflakes (Style 1931), Craftin Desert Diva’s – Tag Essentials Dies, Craftin Desert Diva’s Fancy Frames, Lawn Fawn – Stitched Hillside Borders, American Crafts – Wonderland Collection – 6 x 6″ (15.2 x 15.2 cm) paper pack

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Gelly Roll Stardust – Clear pen, Xyron, Forever in Time – Round Gemstone Stickers, Rhinestone Selection – Dress Up Sheet – Red, Stickles – Diamond,

Image coloured with Copic Markers:

Night Sky: B99, B97, B37, B34, B32, B29, B24, B21, Gelly Roll Sakura #10 Pen

Moose: E27, E25, E23, E35, E33

Snowman: E27, E25, E23, YR18, YR16, YR14, YR12, Y15, BV20, C0, Colorless Blender,

Sweater and Hat: R59, R37, R35, C4, C3, C2, E41, E40, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen, Stickles – Diamond

Scarf: YG67, YG17, G21, R59, R37, R35

Cardinal: R59, R37, R35, Y17, Gelly Roll Sakura #5 Pen

Tree \ Holly Leaves: G99, YG67, YG17, G21, R59, R35

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Wishing You Joy!

Nov11

Welcome Back Dreamerland Craft Fans!

Dreamerland has just released some brand new stamps for the 2019 Christmas release and today, I’m sharing  Wishing You Joy – Model: D19067 (Dreamerland Crafts Clear Stamps)!  The image was coloured with copic markers.

Card Recipe:

Stamp and Sentiment:  Wishing You Joy – Model: D19067 (Dreamerland Crafts Clear Stamps)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Pine Needles

Embossing Powder:  Ranger – Clear Super Fine Detail embossing powder.

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Recollections – Northern Lights – 6″ x 6″ (15.2 cm x 15.2 cm), Green cardstock

Die Cuts:  Poppy – Mountain Hills Plate – Style 2087

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Gelly Roll Sakura #8 Pen

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E47, E44, E43

Pants: B26, B23, B21

Boots: E34, E33, E31

Boy Jacket: E37, E34, E33, E31

Boy – Mitts, Hat and Scarf: BG07, BG05, BG02, BG01, Stickles – Turquoise

Boy – Sweater: G07, G05, YG03

Girl – Mitts, Hat and Scarf: R89, R85, R83, Stickles – Turquoise

Girl: Jacket: B04, B01, B000

Sled: E59, E57, E55, C4, C2

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

From our Gnome To Yours!

Nov6

Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Christmas starting off with a brand new release. YAY!!!  This week, I used Elf Gnome TLF007 (High Hopes Rubber Stamps) and From Our Gnome GLL001 (High Hopes Rubber Stamps) for the sentiment.

Card Recipe:

Stamp: Elf Gnome TLF007  (High Hopes Rubber Stamps)

Sentiment: From Our Gnome GLL001 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Seedless Preserves, Tim Holtz Distress Inks – Peacock Feathers, Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Recollections – Northern Lights – 6″ x 6″ (15.2 cm x 15.2 cm), Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, Purple Cardstock

Die Cuts: My Creative Time – Sentiment Label Dies, Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Ovals

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Stickles – Icicle

Image coloured with Copic Markers:

Gnome Nose: E000, E00, E04, E11, E21, R22, R20

Beard: W3, W1, W0

Outfit: B37, B34, B32, BG15, BG23, BG11, V17, V15, V12

Boots: E43, E41, E40, E34, E33, E30

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Santa and Rudolph

Oct23

Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Christmas. YAY!!!  This week, I used Santa & Rudy – R047 (High Hopes Rubber Stamps) and for the sentiment Jingle All The Way – H040 (High Hopes Rubber Stamps).

Card Recipe:

Stamp: Santa & Rudy – R047  (High Hopes Rubber Stamps)

Sentiment: Jingle All The Way – H040 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Creative Memories – Glacier Paper Pack 12″ x 12″, Recollections – Fireside 6″ x 6″ (15.2 cm x 15.2 cm), Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, Red and Green cardstock

Die Cuts: My Creative Time – Sentiment Label Dies, Lawn Fawn – Lawn Cut dies, Your Next Stamp – Stitched Rectangle Die Set (YNSD214)

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy – Liquid Applique, Stickles – Icicle, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Jacket and Hat: R59, R37, R35

Boots and Buttons: C10, C8, C7

Mitts: G99, YG67, YG17

Deer: E35, E33, E31, E18, E15, R00, R000, W9, W7, W5, Colorless Blender and cloth for texture

 

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Woodland Santa

Oct16

Welcome High Hopes Rubber Stamps Fans

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Christmas. YAY!!!  This week, I used Woodland Santa – R098 (High Hopes Rubber Stamps) for the main image and a sentiment from our new release called O Christmas Tree – GLL002 (High Hopes Rubber Stamps).

To create the scene, I cut out various sizes of trees and then used Tim Holtz Distress Inks to colour them. I also cut out various layers of snow from Recollections – Christmas Inkjet Printable Glitter Paper. Other pieces from the same paper, I just tore for a variation in the snow. I ran all of the little trees and snow through the Xyron Creative Station which made it much easier to put the scene together. Lastly, I popped up the image and sentiment with 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Woodland Santa – R098 (High Hopes Rubber Stamps)

Sentiment: O Christmas Tree – GLL002 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Gathered Twigs, Tim Holtz Distress Ink – Forest Moss, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Pine Needles and Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Recollections – Northern Lights – 6″ x 6″ (15.2 cm x 15.2 cm), Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, Crafter’s Companion – Luxury Cardstock – Green

Die Cuts: Lawn Cuts – Simple Stitched Hillside Borders – Lawn Fawn, Lawn Fawn – Stitched Hillside Borders, Die-namics – Exclusive Designs for “My Favourite Things” – Stitched Rec Scallop Frame – MFT-860, Your Next Die – Skating Rink Scene Die Set, Elizabeth Craft Designs – 1691 – Village Edges

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Gelly Roll Sakura #8 Pen

Image coloured with Copic Markers:

Skin: E000, E00, E04, E21, E11, R22, R20

Hair and Beard: W3, W2, W1, W0

Hat and Pants: R59, R37, R35, Stickles – Icicle

Shirt: YG17, R27, BG99, R17

Boots and Mitts: C10, C9, C7, C5

Wood for Axe and Tree Trunk: E29, E25, E21

Axe: C5, C3, C1

Tree: G99, YG67, YG17, G21

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Christmas Joy!

Oct9

Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Christmas. This week, I used Seasonal Wreath M018 (High Hopes Rubber Stamps) and Christmas Joy G115  (High Hopes Rubber Stamps).

 

Card Recipe:

Stamp: Seasonal Wreath M018  (High Hopes Rubber Stamps)

Sentiment: Christmas Joy G115 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″, Crafter’s Companion Luxury Cardstock – Red – 8.5 x 11″

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug

Die Cut: Craftin Desert Diva’s – Flag Banner Dies (Retired)

Embellishments: Crafts Stickers – 02-3010502, Crafts – Ribbon

Image coloured with Copic Markers:

Wreath: G99, YG67, YG17, G21

Bow: E15, Y28, YR24, Y17, Y08

Ribbon: R59, R37, R35, R27, R24

Candy: BG45, BG10, R59, B26, B23, B21, Gelly Roll Sparkle Pen, Wink of Stella – Clear

Berries: Crafts – Self Adhesive Pearls 02-3006207

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Merry Christmoose!

Jul17

Welcome One Crazy Stamper Fans!

It’s Wednesday, and this month at One Crazy Stamper we are celebrating Christmas in July with High Hopes Rubber Stamps.  This week, I used Mudzies Gift (High Hopes Rubber Stamps). Looks like Mudzie is already to start the celebration of Christmas early too!

Card Recipe:

Stamp:  Mudzies Gift  (High Hopes Rubber Stamps)

Paper: Copic Marker X-Press It Blending Card, American Crafts – Jolly – 6 x 6″ (15.2 x 15.2 cm), Green Cardstock, Crafts – Glitter Cardstock 02-3068425, Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Pine Needles

Die Cuts: Your Next Stamp – Stitched Rectangle Die Set, Cheery Lynn Designs – B923 – Merry Christmoose

Tools: Cuttlebug, MISTI – Most Incredible Stamping Tool

Image coloured in Copic Markers:

Fur: E37, E35, E33, E31

Ears: R02, R01

Antlers: E25, E23, E21

Sweater: BG49, BG45, BG34

Bow: C1, R39, R29, R27, R24

Gift: BG05, BG01, B00, Wink of Stella – Clear

Wall: YG07, YG06, YG01, YG00, G28

Baseboards: C1, 0 Blending Marker

Floor: E09, E08, E07

Christmas Lights: C0, R29, R27, R24, BG49, BG45, BG34, Wink of Stella – Clear

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

 

Polar Bear – Let it Snow

Nov22

Hi There! Sharing a Christmas card that I made using “Kraftin’ Kimmie – New Shake It Up – Polar Bears” stamp set! I love this little set. It is so much fun to work with.

Included a close-up:

 

Stamped onto Copic Marker X-Press It Blending Card using MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. Coloured with Copic markers.

Background snow – Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Die Cuts – Creative Expressions by Sue Wilson – Festive Collection Peeking Snowflake

Hope you like it!

Polar Bear Magic

Nov20

Hi There! Sharing a Christmas card that I made using “Kraftin’ Kimmie – New Shake It Up – Polar Bears” stamp set! I love this little set. It is so much fun to work with.

Here is a close-up of the little bears.

 

Stamped onto Copic Marker X-Press It Blending Card using MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. Coloured images with Copic markers.

Background snow – Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Background sky – Spectrum Noir Alcohol Markers and Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen

Background Paper – Recollections – Frost

Die Cuts – Lawn Fawn – Stitched Hillside Borders, Lea’bilitie die – Star Christmas Frame

Hope you like it!

Reindeer Magic

Nov11

Hi There! Sharing a Christmas card that I made using “Kraftin’ Kimmie – Reindeer Games” stamp set! I love this little set. It is so much fun to work with.

Here are some close-ups of the coloured images:

 

Stamped onto Copic Marker X-Press It Blending Card using
MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink. Coloured the images with a mixture of Spectrum Noir and Copic Alcohol markers.

Background snow – Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Background paper – ColorPlay – Wizard World – Magic School Item#WW8778

Die Cuts – Lawn Fawn – Stitched Hillside Borders

Sentiment – Recollections Christmas Noel – Washi Tape

Hope you like it!

Super Cool Pals

Nov11

Hi There! Sharing a Christmas card that I made using “Kraftin’ Kimmie – New Super Cool Pals” stamp set.

Stamped onto Copic Marker X-Press It Blending Card using MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black ink.

Background snow – Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Background Paper – Creative Memories – Glacier Designer Paper Pack 12 x 12″

Die Cuts – Lawn Fawn – Stitched Hillside Borders

Hope you like it!

Dog Sympathy Card

Apr6

Hi There,

Sharing a dog sympathy card that I made. It is always very hard losing one of our furry friends, especially when we cherish them as if they were our children. They say that we will meet again someday over the Rainbow Bridge so I drew in a rainbow on my card.

The stamps were all stamped with my MISTI – Most Incredible Stamping Tool.

Dog – Kraftin’ Kimmie Stamps – Furry Friends. Stamped onto Copic Marker X-Press It Blending Card and then coloured in with Copic markers. Stamped wings onto Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″ and then fussy cut around them and attached them to the original image.

Sentiment – Kraftin’ Kimmie Stamps – Furry Friends. Stamped onto red paper with Versamark ink and then embossed with Ranger Embossing Powder White – Extra Fine Detail. Added in footprint with paw print from Stampin Up.

Die Cuts – Cut glittery clouds using Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″ and Avery Elle – Custom Steel Dies – Made in the USA – D-05-01 PiercedCloudsDie.

Background – Fierro Aquarelle Watercolour Paper – Tim Holtz Distress Oxide – Faded Jeans and Tim Holtz Distress Oxide – Broken China. Rainbow combination of Tim Holtz Distress Inks – Candied Apple, Tim Holtz Distress Ink – Spiced Marmalade,  Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Wilted Violet and Tim Holtz Distress Ink – Squeezed Lemonade.

Entered into http://kraftinkimmiestamps.blogspot.ca/2018/03/challenge-424-glitter.html

 

Hope you like it!

 

 

Canadian Christmas Greeting Card

Nov28

Sharing a new card that I made for this year using High Hopes – Canadian Christmas Greeting RO48.

Here is a close-up of the characters:

 

Thought this would make a great card for my friends overseas, so I tried to make it as Canadian as possible! LOL!

Stamped the image with my MISTI and Memento – Tuxedo Black onto Copic Marker X-Press It Blending Card. Coloured in the image using Copic markers.

Paper:

American Crafts – Hot Cocoa 6×6 in (15.2×15.2 paper pad)

Recollections – Christmas Inkjet Printable Glitter Paper – 8.5 x 11″

Added snow caps using: Nuvo Glitter Accents and sprinkling on some DecoArt Glamour Dust.

Ribbon: Celebrate It Holiday Ribbon

Dies: My Creative Time -Stitched Squares Inside and Out

Hope you like it!

Entered into contest:

http://onecrazystampercom.blogspot.ca/2017/11/november-challenge-christmaswinter-fun.html

http://highhopesstamps.blogspot.ca/2017/11/november-challenge-christmaswinter-fun.html