Tag Archive | Tim Holtz Distress Ink – Black Soot

Sending You Tidings


Today, I’m featuring a Christmas card by Dreamerland Crafts using their stamp set called Sending You Tidings – D19072. Growing up in the North, we used to get a lot of snow. I always love looking out the window and seeing the snow fall and how beautiful it looks on the houses and trees. Driving in it, not so much, but everything else about winter, I love. LOL!

To make this card, I cut some Copic Marker X-Press It Blending Card to the size of 4.75″ x 3.5″ using my Cuttlebug and My Creative Time – Rectangle Frame Layers Dies. Then using my MISTI and Memento – Tuxedo Black, I stamped the image first onto the paper and then again on to Post-It Note to create a mask. I fussy cut around the mask and placed it to the side to use a little later. I then proceeded to colour in my image with Copic markers.

Once the colouring of the image was complete, I was ready to create the sky. To accomplish this, the mask that I had set aside earlier was placed over top of the coloured image. A mixture of Tim Holtz Distress Inks were then used: Black Soot, Chipped Sapphire, Blueprint Sketch and Dusty Concord inks. Once, the background was completed, I stamped the sentiment from the same stamp set using my MISTI and VersaMark ink. The sentiment was then embossed with Ranger Embossing Powder White – Extra Fine Detail and Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

I was now ready to add the final finishing touches. To do this, I added in the snowflakes and stars using Gelly Roll Sakura #10, #8 and #5 Pens. Stickles – Cool Mint was added to the little lady’s hat, pom-pom and coat cuffs. Gina K Designs – Glitz Glitter Gel was applied with a spatula along the bottom of the card to create some sparkling snow and also to the top of the chimney with a Q-Tip. I also coloured in the little snowflake in the sky with Gelly Roll Sakura #10 pen and then Gelly Roll Stardust – Clear to make it sparkle. I set the card aside to let the glitter dry for a few hours.

For the card base I used Recollections – Winter 4.25″ x 5.5 and edged around all of the sides with Tim Holtz Distress Ink – Iced Spruce. I die cut Hot Buy Craft Smart – Holiday Glitz Glitter Paper to the size 3.75″ x 5″ using My Creative Time – Rectangle Frame Dies and Cuttlebug. This was adhered directly onto the base using 3M VHB – 2 sided tape. Once the glitter was completely dry, I layered the completed image on top of the second layer using 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment:  Sending You Tidings – D19072 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Ink – Chipped Sapphire, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Inks – Dusty Concord, Tim Holtz Distress Ink – Iced Spruce

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Recollections – Winter 4.25″ x 5.5″ (Assorted Box of Cards)

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Die Cuts: My Creative Time – Rectangle Frame Die Layers – MCT-D274, My Creative Time – Rectangle Frame Dies

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Stickles – Cool Mint, Gelly Roll Sakura #8 Pen, 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000, R22, R20, Eyes – Sakura Glaze – Black

Hair: E47, E44, E43

Hat, Jacket, Mitts, Bear’s Scarf:  BG49, BG15, BG13, BG11, Stickles – Cool Mint

Leggings: C7, C5

Boots: E27, E25, E23, E21

Bear: E35, E34, E33, E31, E30, R22, R20, Eyes and Noses – Sakura Glaze – Black

Bow and Girl’s Scarf: R59, R39, R37, R35

Present: Y17, Y15, Y08, Y04

Chimney: E99, E97, E08, E07, E13, C4, C2

Snow: Gina K Designs – Glitz Glitter Gel, Gelly Roll Sakura #8 Pen, Gelly Roll Sakura #5 Pen

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Santa in the Chimney!!!


It’s Wednesday, and this week I’m sharing a Christmas card featuring Santa in Chimney – S202 from (High Hopes Rubber Stamps) paired with the sentiment Bold – From One Flake – K201 (High Hopes Rubber Stamps). December is almost here and Santa is on his way to deliver all of the goodies to everyone. Hope your not on the naughty list. LOL!

To create the card this week, I stamped the main image and then coloured it in with Copic Markers. I stamped the image again and used it as a mask. I have a magnetic cutting mat, so I just used a very strong magnet to hold the mask down. Then I used multiple Tim Holtz Distress Inks to create the sky.

Once the sky was created, I removed the mask and used My Creative Time – Rectangle Frame to die cut the image. I added the sentiment using the top half of the sentiment stamp only. To do this, using my MISTI to get a good clean stamped image, I used VersaMark Ink and then embossed it with Ranger Embossing Powder White – Extra Fine Detail. This was then heated using Marvy Uchida – Embossing Heat Tool.

To finish off my background, I added in some snowflakes and stars using Gelly Roll Sakura #10 Pen and Gelly Roll Sakura #5 Pen. For the eyes and notches on the belt, Sakura Glaze – Black ink was used. For the snow on the roof top, Gina K Designs – Glitz Glitter Gel was applied with a little sprinkle of Martha Stewart Crafts – Crystal Fine Glitter. Stickles was added to the hat, collar and cuffs of Santa’s outfit.

To create the layers, I first die cut Hot Buy Craft Smart – Holiday Glitz Glitter Paper with My Creative Time – Rectangle Frame Layers and then the dark blue panel with My Creative Time – Rectangle Frame dies. For the card, I used Hammermill – Premium Colour 100 lb. paper, which was cut at 8.5″ x 5.5″ and then scored at 4.25″ and to create a base card of 4.25″ x 5.5″.

To assemble the remainder of the card. I placed the dark blue layer directly to the base using double-sided tape. The silver layer was applied the same way. The coloured image was then popped up using 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Santa in Chimney – S202 (High Hopes Rubber Stamps)

Sentiment: Bold – From One Flake – K201 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Black Soot, Dusty Concord, Blueprint Sketch and Chipped Sapphire, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Dark Blue Cardstock, Hammermill – Premium Colour 100 lb.

Die Cuts: My Creative Time – Rectangle Frame Layers, My Creative Time – Rectangle Frame Dies

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Glitter: Martha Stewart Crafts – Crystal Fine Glitter, Gina K Designs – Glitz Glitter Gel, Stickles

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R21, R20

Hair: W3, W2, W1, W00

Hat and Outfit: R59, R39, R37, R35

Belt: C9, C7, C5, C4, E15, YR24, Y35, Y08

Mitts: C9, C7, C4

Sack: G94, G28, G09, G07, G05, YG67, YG63, YG61

Chimney: E99, E97, E13, E08, T5, T3, T1

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Wishing You The Best


Today, I’m featuring a Christmas card by Dreamerland Crafts using their stamp set called Wishing You and Your Family – D19069. I decided to make the scene a snowy night, because when we were little, we used to go at dusk to pick up out our new tree. It was always so much fun!

 

To make this card, I cut some Copic Marker X-Press It Blending Card to the size of 5.5″ x 4.25″. Then using my MISTI and Memento – Tuxedo Black, I stamped the image first onto the paper and then again on to Post-It Note to create a mask. I fussy cut around the mask and placed it over top of the main image. To create my background I used Tim Holtz Distress Ink – Black Soot, Chipped Sapphire, Blueprint Sketch and Dusty Concord inks. Once they were all blended and I was satisfied with the look, I spritzed some water on top and then placed some paper towel over top to pick up some of the droplets.

I removed the mask and proceeded to colour in the main image with Copic markers. I stamped the sentiment from the same stamp set using my MISTI and VersaMark ink. The sentiment was then embossed with Ranger Embossing Powder White – Extra Fine Detail and Marvy Uchida – Embossing Heat Tool was used to heat set the embossing powder.

I was now ready to add the final finishing touches. To do this, I added in the snowflakes and stars using Gelly Roll Sakura #8 Pen and Stickles – Cool Mint to the little lady’s hat and scarf. Gina K Designs – Glitz Glitter Gel was applied with a spatula along the bottom of the card to create some sparkling snow. I set the card aside to let the glitter dry for a few hours.

Once everything was dry, I attached it to a white base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. paper with double-sided tape.

Card Recipe:

Stamp and Sentiment:  Wishing You and Your Family – D19069 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, VersaMark, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Ink – Chipped Sapphire, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Inks – Dusty Concord

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb.

Embossing Powder:  Ranger Embossing Powder White – Extra Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, Marvy Uchida – Embossing Heat Tool, Stickles – Cool Mint, Gelly Roll Sakura #8 Pen

Image coloured with Copic Markers:

Face: E21, E11, E04, E00, E000, Eyes – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Hair: E47, E44, E43

Jacket, Scarf and Mitts:  BG49, BG18, BG15, Stickles – Cool Mint

Car and Wheels: C10, C6, C8, C3, C1, C0, C00, R59, R39, R37, R35, R17, R14

Bears: E35, E34, E33, E31, E29, E27, E25, E23, Eyes and Noses – Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Bear’s Hat: R39, R37, R35, Gelly Roll Stardust – Clear

Tree and Star: G99, YG67, YG17, G21, W15, YR24, Y35, Y08

Background Inside Car: B66

Snow: Gina K Designs – Glitz Glitter Gel, Gelly Roll Sakura #8 Pen

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

I Don’t Bite….Usually!!


Today I’m sharing  Vampire Gnome (KLM Digital Designs) image from the October release. This adorable little Gnome comes with 5 different sentiments. Two of them, I have used here. The others are “2020 Sucks”, “Bats About You” and “Don’t Let These Times Drain You”. I love this little gnome and with these fun sentiments, there are so many different cards that you can make.

I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. I used my Brother Scan and Cut to cut around the image and coloured it in with Copic markers.  I added some Clear – Wink of Stella to the stars, moon and coloured squares on his hat and gown. The sentiments were printed out on orange cardstock. I cut them and then inked around the edges with Tim Holtz Distress Ink – Spiced Marmalade.

For the oval, I used Echo Park – I Love Halloween paper and die cut using my Cuttlebug and My Creative Time – Scalloped Stitched Oval Dies. I also, used this paper on the top and bottom of my card. For the centre background, I used To Every Season – Stampin’ Up paper. I used some double-sided tape to join the top paper with stars to the haunted house background. Then I cut the background to 5.25″ x 4″ and inked around all of the edges with Tim Holtz Distress Ink – Black Soot. I also used the same ink to go around the edges of the oval.

To assemble the card, I began with an orange card base of 5.5″ x 4.25″ by using a pre-cut card by The Paper Studio – Primary Base Colours. The edges were all inked with Tim Holtz Distress Ink – Black Soot. The background was adhered to the base using double-sided tape. The image, sentiments and oval were both popped up using 3M VHB – 2 sided tape. Finally, some Recollections Bling Stickers were added as embellishments to finish off the card.

Card Recipe:

Stamp and Sentiments: Vampire Gnome (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Ink – Spiced Marmalade

Paper: Copic Marker X-Press It Blending Card, To Every Season – Stampin’ Up, Echo Park – I Love Halloween, The Paper Studio – Primary Base Colours

Die Cuts: My Creative Time – Scalloped Stitched Oval Dies

Tools: 3M VHB – 2 sided tape, Cuttlebug, Recollections Bling Stickers, Clear – Wink of Stella

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W5, W4, W3, W2, W1, W0, W00

Cape and Hat: V09, V06, V04, E15, Y38, Y35, Y15, YR18, YR16, YR12, YG25, YG23, YG11, R59, R39, R37, R35

Bat: N10, N8, N6, Sakura Glaze – Black for the eyes

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Witchy Poo’s Happy Hallowe’en!!!


It’s Wednesday, and Sitting Witchy Poo from (High Hopes Rubber Stamps) is back again to celebrate a Happy Hallowe’en and wondering what to do with all her candy.  My husband and I just LOVE Hallowe’en! We try to decorate our yard every year for the little ghosts and goblins who come to visit and we give out lots and lots of candy. Our front lawn gets turned into a grave yard for a day with spooky black cats, crows, skeletons, and more. On the porch we put out all of the animated little toys and of course the talking skeletons playing poker at the Bistro table. LOL! The children just love it and so do the parents! LOL!

To create the card this week, I stamped the main image and then coloured it with Copic Markers listed below. I fussy cut around Witchy Poo leaving just a little bit of white around the top of her body, but going directly to the line for the bottom of her. Flag Banner Dies from Craftin’ Desert Diva’s (restired) were used for the die cut and then the sentiment was stamped onto it. Tim Holtz Distress Ink – Carved Pumpkin was applied around the edges to create a frame around the orange cardstock.

To create the background, Pebbles – Boo! paper was used. I wanted to add something a little extra so I pulled out my Kraftin’ Kimmie – Bats and Moons Stencil and applied Nuvo Glimmer Paste – Amethyst Purple! I just love the way it turned out. The bottom piece of cardstock was cut at 1″ x 5.5″. Tim Holtz Distress Ink – Black Soot was used to go around all of the edges of the top and bottom piece.

Once everything was dry my card was ready to be assembled. I began with a standard white card base of 4.25″ x 5.5″. I mounted the coloured circles and bats cut at the same size directly on top of the base with 2-sided tape. I did the same with the candy on the very bottom. The image and the sentiment were both popped up with 3M VHB – 2 sided tape. Finally, to cover some of my paste boo-boos, I added in some candy corn from Dress My Craft – Dessert Mix.

Card Recipe:

Stamp: Sitting Witchy Poo – S151 (High Hopes Rubber Stamps)

Sentiment: Happy Halloween – H232 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Carved Pumpkin, Tim Holtz Distress Ink – Black Soot

Paper: Copic Marker X-Press It Blending Card, Pebbles – Boo! (6×6 in / 15.2×15.2 cm), Orange cardstock, White Cardstock

Die Cut: Craftin Desert Diva’s – Flag Banner Dies (Retired)

Stencil: Kraftin’ Kimmie – Bats and Moons

Tools and Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, Nuvo Glimmer Paste – Amethyst Purple, Dress My Craft – Dessert Mix

Image coloured with Copic Markers:

Skin: BG96, BG93, BG90, YG23, G40

Hair: E18, E08, YR18, YR14

Hat, Blouse, Pantaloons: V17, V09, V06, V04

Vest, Dress and Hat Band: YR68, YR65, YR18, YR15, YR12, YR00

Socks: YR18, YR15, YR12, YG09, YG07

Shoes: V17, V09, V06, V04, N6, N4, N2, E15, Y38, Y35, Y15

Star: E15, Y38, Y35, Y15

Hope you like it and have a spooktacular week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Friends for Heifer!


It’s Wednesday, and this week, I used Clarabelle and Riley – Q032 (High Hopes Rubber Stamps) for the main image and Friends for Heifer – G183 (High Hopes Rubber Stamps) for the sentiment. Riley thought Clarabelle could use a big hug. It will be so nice when we can get back together again with friends and family and give them a big hug too!

To make my card this week, I thought I would keep it simple. I thought the cow print from Doodle Bug Designs Inc. – Down on the Farm went with this card beautifully. I stamped the image onto Copic Marker X-Press It Blending Card and then coloured the image in with Copic Markers. Once I coloured the image in, I carefully placed it behind the patterned paper and then placed it onto my card base sized 5.5″ x 5.5″. I inked around the edges of the card with Tim Holtz Distress Ink – Black Soot and added a little black bow to finish it off.

Card Recipe:

Stamp:  Clarabelle and Riley – Q032  (High Hopes Rubber Stamps)

Sentiment: Friends for Heifer – G183 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Black Soot

Paper: Copic Marker X-Press It Blending Card, Doodle Bug Designs Inc. – Down on the Farm – 6″ x 6″ paper pad

Die Cuts: My Creative Time – Bunch of Fun Circle Dies

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R22, R20

Hair: E47, E44, E43

Shirt: YG67, YG63, YG61, R29, R27, R24

Pants: B26, B23, B21

Hat and Boots: E29, E27, E25, E23

Scarf: B26, B23, B21, R29

Cow: C10, C8, C6, C1, C0, R11, R02, R01, E53, E51, E50

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Check out the High Hopes Website for something else to brighten your day!

Over on the High Hopes Website there is a Store Wide sale, save 20% off right now when you use the coupon Code Love at the checkout!

 

Love Every Little Moment


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a card that I made using Mix and Match Clear Stamps (DC19095) (Dreamerland Crafts)!  Love the images for this stamp. There are so many different scenes that can be created. I chose to do a night scene with the 2 best friends sharing the serenity of the night sky.

To make this card, I first die cut some Bristol paper and then drew in the hills with light pencil and traced around the stamps to get the general idea of placement. I created a masked image of the bear and bunny using Inkadoo Stamping Mask Paper and Post-It Note for the hills and cut them both out. Next I erased all of the lines so that you could barely see them and stamped the bear and the bunny image directly onto the Bristol Paper. Next, I mounted the mask of the characters and hills that I had cut out previously over top of the stamped images so that they would be protected while I coloured in the sky.

To do the sky I used a mixture of Tim Holtz inks listed below and PrismaColor pencils. Then I blended all of the colours together using Gamsol and a blending paper stump. I repeated the process with the PrismaColor pencils several times.

Once the sky was completed, I removed the stencil for the grass and proceeded to colour it in using the same technique that I had used for the sky.

Lastly, I removed the mask for the bear and bunny and coloured them in. I added in some small trees using a Black Prismacolor pencil.

I popped my finished image, back into my MISTI again and stamped the sentiment using VersaMark. I also stamped in the stars in the sky and embossed everything with Ranger Embossing Powder White – Extra Fine Detail. I also used a brush and tapped some of the white embossing powder all over the sky. Then heated it with my Marvy Uchida – Embossing Heat Tool. Lastly, I stamped and embossed the seagulls using VersaFine – Onyx Black and Ranger – Clear Super Fine Detail embossing powder. I coloured them in using Black PrismaColor pencil and then added in some highlights on the wings.

I popped up the coloured image and blue cardstock with 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiment: Mix and Match Clear Stamps (DC19095) (Dreamerland Crafts)

Inks: Versa Fine – Onyx Black, Versa Mark, (Sky Base): Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Ink – Chipped Sapphire, Tim Holtz Distress Ink – Black Soot

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail, Ranger – Clear Super Fine Detail embossing powder.

Paper: Inkadoo Stamping Mask Paper, Blue and Green – Recollections paper, Bristol Paper

Die Cuts:  My Creative Time -Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool, 3M VHB – 2 sided tape

Image coloured with PrismaColor Pencils:

Sky:  Indigo Blue (PC901), Indanthrone Blue (PC208), Violet Blue (PC933), Denim Blue (PC1101), Black (PC935)

Grass: Dark Green (PC908), Peacock Green (PC907), Marine Green (PC988), Grass Green (909)

Bear: Dark Brown (PC946), Dark Umber (PC947), Chocolate (PC1082), Burnt Ochre (PC943), Sienna Brown (PC945)

Rabbit: 30% Warm Grey (PC1052), 20% Warm Grey (PC1051), 10% Warm Grey (PC1050)

Seagull Wings Highlight: White (PC938), Denim Blue (PC933)

All colours were blended with paper stump and Gamsol blending fluid.

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Witchy Poo and Crew!!


Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Hallowe’en.  This week, I used Boo Crew In Frame – P121 (High Hopes Rubber Stamps).

Card Recipe:

Stamp: Boo Crew In Frame – P121 (High Hopes Rubber Stamps)

Sentiment: Pebbles – Boo! (6×6 in / 15.2×15.2 cm)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Black Soot

Paper: Copic Marker X-Press It Blending Card, Pebbles – Boo! (6×6 in / 15.2×15.2 cm)

Tools: MISTI – Most Incredible Stamping Tool, Black Sewing Thread, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: BG96, BG93, BG90, YG23, G40

Hair: V17, RV04, YG23, YR02, RV93

Hat and Dress: V09, V06, V04, YR18, YR15, Clear – Wink of Stella

Bat: W7, W5, W3, W1, R22, R20

Ghost: C2, C0, Colourless Blender, R22, R20

Bow: YG13, YG11, YG09

Wood Frame: E39, E37, E35, E33

Eyes: Sakura Glaze – Black, Gelly Roll Sakura #5 Pen

Background: BV08, BV04, BV02, BV00

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Fright Night! Beware!!!!


Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Hallowe’en.  This week, I used Monty Q109  (High Hopes Rubber Stamps).

I thought it would be fun to make him come out of a scary forest with the full moon behind him. I darkened the Birch trees in the background with Tim Holtz Distress Ink – Hickory Smoke so that it would look like they were further in the background. Hallowe’en is coming and Monty is ready for a frightfully good time! Beware!!!!

Card Recipe:

Stamp: Monty Q109 (High Hopes Rubber Stamps)

Sentiment: Hallowe’en Rub-on from my craft stash, Stampendous – Class a’ peel stickers

Inks: Memento – Tuxedo Black

Background: Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Ink – Fossilized Amber, Tim Holtz Distress Ink – Gathered Twigs, Tim Holtz Distress Ink – Hickory Smoke, Tim Holtz Distress Ink – Mustard Seed, Tim Holtz Distress Ink – Seedless Preserves, Tim Holtz Distress Ink – Wilted Violet, Tim Holtz Distress Inks – Dusty Concord, Tim Holtz Distress Inks – Ground Espresso

Paper: Copic Marker X-Press It Blending Card, Marian Design – Swedish Winter – 8.25″ x 6″, Canson Watercolor – Cold Press – 140 lb. (300 g)

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug

Die Cuts: Joy Crafts – Winter Wishes Birch Trees – 60020928, Frantic Stamper Precision Die – Birch Tree Forest – FRA10034, Lifestyle Crafts Cutting Dies – Nesting Circles

Image coloured with Copic Markers:

Monty: E53, E51, E50, E49, E44, E29, E27, E23, E37, E35, E34, E33, R39, R29, R27, R24, R22, R20

Hope you like it and have a spooktacular week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

Somebunny Loves You


Hi Dreamerland Fans!

Today I’m sharing a card that I made using a new release stamp from Dreamerland Crafts called I Believe in Love.  I decided to make this an inspirational card because I loved the way the little girl was hugging her bunny with such affection.

I stamped the image onto Copic Marker X-Press It Blending Card using my MISTI – Most Incredible Stamping Tool and Memento – Tuxedo Black. Then the image was coloured in with Copic markers. For the background I used Canson Watercolour Paper and first layered the grass area with multiple Tim Holtz green shades of ink listed below and then the sky with Tim Holtz blue shades of ink. Lastly, to finish the grass, I used a Rake brush and a mixture of Tim Holtz Distress Ink – Mowed Lawn and Tim Holtz Distress Ink – Pine Needles and some water. For the clouds in the sky, I used a cotton ball, cotton swab and some water. Lastly I stamped the sentiment using VersaMark and embossed it with Ranger Embossing Powder White – Extra Fine Detail.

Card Recipe

Stamp: I Believe in Love (Dreamerland Crafts)

Sentiment: Make Special Cards – February 2019 – Issue 16

Paper: Canson Watercolour Paper, Copic Marker X-Press It Blending Card

Ink: Memento – Tuxedo Black, VersaMark

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Image coloured in Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E15, Y38, Y21, YR23

Sweater \ Bow in Hair: V09, V06, V04, V01

Sweater Pattern \ Tights: BG57, BG49, BG45

Pants: E29, E27, E25, E23, E21

Boots: E55, E53, E51, E50, E25, E42, E41, E40

Bunny: R02, R20, C-3, C-2, C-1, Colourless Blender

Grass: Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Pine Needles, Tim Holtz Distress Inks – Lucky Clover, Tim Holtz Distress Ink – Bundled Sage, 1/2 Loew-Cornell 7120 Rake Brush

Sky: Tim Holtz Distress Inks – Broken China, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Tumbled Glass

Stencil: Memory Box Designer Stecil – Frame Love, Tim Holtz Distress Ink – Black Soot

Miscellaneous: MISTI – Most Incredible Stamping Tool, Ranger Embossing Powder White – Extra Fine Detail

Thanks for dropping by and hope to see you back soon!

Sweet Birthday Dreams


Welcome Dreamerland Fans!

Some of you may be new to my blog since Dreamerland Crafts is introducing the 2019 design team and today is my day! I was so excited to be asked to join the Dreamerland team this year.

For my card, I thought the little boy hugging his pillow with his little kitten on his back was adorable! It made me think of making a birthday card with him sleeping and dreaming about all of his wishes coming true.

Dreamerland Crafts – Birthday 08  was used to create the sentiment and  Dreamerland Crafts – ZZZ was used for the image.

 

Here is a close-up of the little boy image:

To make the card, I first die cut the image from Copic Marker X-Press It Blending Card using my Cuttlebug and die cut from Spellbinders Labels 17. Then I stamped the image onto it using my MISTI (Most Incredible Stamping Tool) with Memento Tuxedo Black ink.

Copics were then used to colour the image. I chose a starry background to represent night time for his dreaming! This was die cut with Spellbinders Labels 17 as well and then edged with Tim Holtz Distress Ink – Black Soot. Sentiment from Dreamerland Crafts – “ZZZ” was then stamped with Versa Fine – Onyx Black ink and then embossed with Ranger – Clear Super Fine Detail Embossing Powder and heated with Marvy Heat Embossing Tool.

For the sentiment, I used the die cut from My Creative Time – MCT 224. Sentiment was stamped with Versa Fine – Onyx Black ink and then embossed with Ranger – Clear Super Fine Detail Embossing Powder and heated with Marvy Heat Embossing Tool. Used Tim Holtz Distress Ink – Evergreen Bough around the border of the die cut.

Tim Holtz Distress Ink – Shabby Shutters was used for edging around the card.

Both the main image and Sentiment were popped up with  3M VHB 2-sided tape.

Card Recipe:

Stamps: Dreamerland Crafts – Birthday 08 – DS17059; Dreamerland Crafts – ZZZ – D19026

Hair: E47, E44, E43, R21, E25

Skin: E21, E11, E04, E00, E000, R22, R20

PJ’s: BG18, BG15, BG13, BG11

Kitten: C7, C5, C3, C1, R22, R20

Pillow: E27, E25, E23, E21

Blanket: YG25, YG23, YG21, Colourless Blender

Wall: B04, B02, B01, B00, B000

Background Paper: Pebbles – Boo! (6×6 in / 15.2×15.2 cm); Echo Park Paper Co. – Imagine That (6×6 in / 15.2×15.2 cm)

Inks: Tim Holtz Distress Ink – Shabby Shutters, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Ink – Evergreen Bough, VersaMark – Onyx Black, Memento – Tuxedo Black

Embellishments: Echo Park Paper Co. Enamel Dots – Imagine That!

Dies: My Creative Time – Sentiment Label Dies – MCT 224; Spellbinders Labels 17

Thank you so much! I hope you like my card.