Tag Archive | Ranger Inkssentials – Glossy Accents

You’re O-Fish-Ally Awesome!

Sep13

It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Finnigan – P117 for the image and O-fish-ally – FLL019 for the sentiment. We have a lot of family and friends that love to fish and when I saw this image and sentiment, I could resist pairing them together.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb., cut and scored to be 5.5″ x 4.25″. Stampin’ UP! – Whale of a Time Designer Series Paper was cut to be the same size as the base and applied using double-sided tape. Using paper from the same pack, I fussy cut around the school of fish and applied it to the base card using a mixture of double-sided tape and glue. The excess was then trimmed off on the bottom and left side of the card. Tim Holtz Distress Ink – Evergreen Bough was applied around all of the outer edges of the card using a finger dauber. Using my Anna Griffin Empress Mini Machine and PinkFresh Studio Essentials – Blanket Stitched Circle, I die cut Copic Marker X-Press It Blending Card cardstock. Then, using my MISTI and Memento – Tuxedo Black ink, I stamped the image onto the die-cut piece. The sentiment was also stamped using my MISTI onto the same cardstock and then die cut using Gina K Designs – Sentiment Strips. Lastly, I combined the dies from PinkFresh Studio Essentials – Blanket Stitched Circle and Lifestyle Crafts Cutting Dies – Nesting Circles to create a frame using the paper from Stampin’ UP! – Whale of a Time Designer Series Paper and Anna Griffin Empress Mini Machine.

The image was coloured in with Copic markers listed below. I coloured in the fish first, then the water. Some sand was added to the bottom of the bowl using a Ranger – Emboss It Pen Clear and Seth Apter – Dirty Sand Embossing Powder. This was heat set with a Marvy Uchida – Embossing Heat Tool. I wanted the back part of the sand to appear lighter, so I just dabbed the pen in spots to add in the Embossing Powder after I had coloured it. Lastly, I applied Ranger Inkssentials – Glossy Accents to the inside of the bowl and puddles of water. This was set aside to dry.

Once the Glossy Accents was dry the card was ready to assemble.  I applied some glue to the circle frame I had created earlier and applied it over top of the coloured image circle. U-Line double-sided tape was applied to the back of the image and sentiment and they were both popped up onto the background designer papers. I thought these adorable buttons from Buttons Galore & More – Fun in the Sun Collection were perfect for this card. The button backings were removed from the backs of the fish buttons and U-Line double-sided tape was applied to them. I popped up the 3 fish on the card to finish it off.

Card Recipe:

Stamps: Finnigan – P117 (High Hopes Rubber Stamps)

Sentiment: O-fish-ally – FLL019 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Evergreen Bough

Die Cuts: PinkFresh Studio Essentials – Blanket Stitched Circle, Gina K Designs – Sentiment Strips, Lifestyle Crafts Cutting Dies – Nesting Circles

Embossing Powder: Seth Apter – Dirty Sand

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Stampin’ UP! – Whale of a Time Designer Series Paper (6″ x 6″)

Embellishments: Buttons Galore & More – Fun in the Sun Collection

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Ranger – Emboss It Pen Clear, Marvy Uchida – Embossing Heat Tool, Ranger Inkssentials – Glossy Accents, Anna Griffin Empress Mini Machine

Image coloured with Copic Markers:

Fish: YR68, YR31, YR18, Y38, R89, R59, R39, R29, R24

Fish Bowl, Water, Sand and Water Droplets: B04, B02, B01, B00, E44, E43, E42, E41, C3, C2, C1, C00, Seth Apter – Dirty Sand

Background: BG72, BG57, BG32, BG11, E37, E35, E33, E31

Hope you like it and have a fantastic week!

Check out more adorable images at High Hopes Rubber Stamps!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Book Worm!!

Sep6

It’s Wednesday, and this week, I couldn’t resist making this very easy bookmark using High Hopes Rubber Stamps Book Worm – P100 for the image. My husband I both love to read and with this adorable image, it is quick to create multiple bookmarks quickly. They would also be a great gift for the readers in your life too!

To make my bookmark this week, I stamped the main image onto Copic Marker X-Press It Blending Card cardstock using my MISTI and Memento – Tuxedo Black ink. I coloured in the image and I wanted the eyes to stand out. I added in a small line with a Pigma Micron #5 – Black pen and then added some colour to the eyes. To finish the eyes,  I added a little dot of white using a Gelly Roll Sakura #8 Pen. The image was then fussy cut with a small white border all around it. Crafts – Designer Paper – 02-3093268 was die cut using Die-Namics MFT-489 PCD Fishtail Figs STX and my Anna Griffin Empress Mini Machine. I punched a hole using We R Memory Keepers Crop-A-Dile Eyelet and Snap Punch at the top of the bookmark. We R Memory Keepers Embellishment Makers Basic Tools-Tassel Loom was used to create the tassel along with 3 yards of twine and then 2 6″ pieces of twine.  I wanted the image to lay flat on the bookmark, so I ran it through my Xyron Create a Sticker and then applied it to the die cut. I tied a knot in the twine to join the tassel to the book mark and then added some Ranger Inkssentials – Glossy Accents to the glass lenses to finish it off.

Card Recipe:

Stamp: Book Worm – P100 (High Hopes Rubber Stamps)

Ink: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Crafts – Designer Paper – 02-3093268 (6″ x 6″)

Die Cuts: Die-Namics MFT-489 PCD Fishtail Figs STX

Tools: MISTI – Most Incredible Stamping Tool, Xyron Create a Sticker, Gelly Roll Sakura #8 Pen, Ranger Inkssentials – Glossy Accents, Pigma Micron #5 – Black, Anna Griffin Empress Mini Machine, We R Memory Keepers Crop-A-Dile Eyelet and Snap Punch, We R Memory Keepers Embellishment Makers Basic Tools-Tassel Loom

Image coloured with Copic Markers:

Worm: YG23, YG11, YG09, R20, R30

Eyes: C1, C0, E25, E23, Y17, W9, Gelly Roll Sakura #8 Pen, Pigma Micron #5 – Black

Glasses and Bow Tie: BV29, BV25, BV23, Ranger Inkssentials – Glossy Accents for the lenses

Book: BV25, BV23, V000

Hope you like it and have a fantastic week!

Check out more adorable images at High Hopes Rubber Stamps!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Big Hugs!!

Jun13

Today, I’m sharing a card using this super adorable image from Dreamerland Crafts stamps called Big Hug – D19025. Great big in person hugs or even virtual hugs are always nice to have or to give to someone or something that you love. Have you hugged someone today?

To make this card I created a base card of 5.5″ x 4.25″ using Hammermill – Premium Colour 100 lb. cardstock. With Tim Holtz Distress Ink – Salty Ocean, a Picket Fence Studio Blender Brush and Lawn Fawn – Cloudy Stencil, I created the clouds. Then, using a combination of Tim Holtz Distress Inks – Mowed Lawn, Tim Holtz Distress Ink – Bundled Sage, a Picket Fence Studio Blender Brush and a mixture of Lawn Fawn – Clippings – Simple Hillside Stencils and Lawn Fawn – Clippings – Slimline Grassy Hillside Stencils, I created the grass. With my Anna Griffin Empress Die-Cutting Mini Machine, Lawn Fawn – Giant Sending Big Hugs was die cut twice using Recollections – Black cardstock. Liquid glue was used to fuse the 2 pieces together. I applied glue to the back of the combined pieces and attached it directly to the base of the card.

Using my MISTI and Memento – Tuxedo Black ink, I stamped the main image onto Copic Marker X-Press It Blending Card and coloured it in with Copic markers. Ranger Inkssentials – Glossy Accents was added to the glasses. The coloured image was fussy cut with scissors leaving a slim white border around it. This was then applied directly to the base card using U-Line – double-sided tape.

Card Recipe:

Stamp: Big Hug – D19025 – Dreamerland Crafts

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Mowed Lawn, Tim Holtz Distress Ink – Bundled Sage

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – Black cardstock

Die Cuts: Lawn Fawn – Giant Sending Big Hugs

Stencils: Lawn Fawn – Cloudy Stencil, Lawn Fawn – Clippings – Simple Hillside Stencils, Lawn Fawn – Clippings – Slimline Grassy Hillside Stencils

Tools: MISTI – Most Incredible Stamping Tool, Anna Griffin Empress Mini Machine, Picket Fence Studio Blender Brushes, Ranger Inkssentials – Glossy Accents

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R30, R20

Hair: E47, E44, E43, E41

Shirt: B16, B12, B05

Tie: V06, V04, V01

Jeans: B26, B23, B21

Shoes: N9, N7, N5, N4

Cat:  N9, N7, N5

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Believe in Santa!!

Nov19

Hi everyone…today we are having a sponsor day over at the Passionate Paper Creations & Friends FB group site with Joy Clair Designs!! Today I’m using this adorable Santa image and sentiment from Joy Clair Designs called Love Santa Digital Stamps. Thank you Joy Clair Designs for sponsoring us.

I printed out the image and sentiment using HP High Quality Grayscale onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then fussy cut. The sentiment was die cut with my Cuttlebug and Whimsy Stamps – Quick Strips Die Set – WSD330.

For the base card, I used AC Cardstock – White and cut it and scored it to be 6″ x 6″. For the background, I applied Craft Consortium – Made By Elves (6″ x 6″) to the base using double-sided tape. A Sharpie – Gold Medium Point – Water Based Paint was used to go around the edges of the card and also around the sentiment. I applied some Ranger Inkssentials – Glossy Accents on top of the snow to make it look like an icy pond and applied some Stickles – Crystal around the edges. Once it was dried, I popped up the image and sentiment onto the background using U-line double sided tape to complete the card.

Card Recipe:

Stamp and Sentiment: Love Santa Digital Stamps – Joy Clair Designs

Inks: HP High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Craft Consortium – Made By Elves (6″ x 6″), Hammermill – Premium Colour 100 lb.

Die Cuts: Whimsy Stamps – Quick Strips Die Set – WSD330

Miscellaneous: U-Line double-sided tape, Ranger Inkssentials – Glossy Accents, Sharpie – Gold Medium Point – Water Based Paint, Stickles – Crystal, Stickles – Star Dust

Image coloured with Copic Markers:

Skin: E21, E11, E01, E00, R30, R20

Beard and Hair: C3, C2, C1, C0, Colorless Blender

Hat and Clothing: R59, R37, R35, B60, C1, C0, E15, Y35, YR24, Y08, Stickles – Star Dust

Skates: C2, C1, C0, W3, W2, W1, Pental Sunburst Metalic Med Gel Pen – Silver

Hope you like it and have a great week!

Come and check us out on Passionate Paper Creations & Friends FB group
as we are currently sponsoring Joy Clair Designs,  Joy Clair Designs Facebook Group.

Oh you don’t want to miss this big sale! Jump over to Passionate Paper Creations & Friends. Not a Member? Come Join! https://bit.ly/2VwG9iz.

If you are a member of Passionate Paper Creations & Friends FB group
you can go to the top of the page and get a shopping discount.

If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Mudzie Goes Skating!

Dec4

Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday and this week I’m back to share a card that I made using Skating Mudzie – R064 (High Hopes Rubber Stamps) with Frozen Skating Pond – S074 (High Hopes Rubber Stamps) for my background and then finished off with the sentiment Sparkle In Ice – H156 (High Hopes Rubber Stamps).

This card brought back memories of skating on the Ottawa Canal when I was younger whenever we went to visit our grandparents and my mom’s side of the family. We would skate for hours, enjoying Beaver Tails along the way (Beaver Tails are a fried dough pastry, stretched to look a beaver’s tail with added yummy toppings of your choice. They are sooooooo good! LOL!)

I grew up in Northern Ontario and we couldn’t wait to get home from school to lace up our skates and go across the street to the rink to skate. Like Starbuck’s, we had rink on practically every corner and the rinks were always full of children playing hockey or rink games. Our parents would have to fight with us to go inside. We would go in for supper and then be right back out on the ice again.

To make this card, I first coloured the ice with a mixture of blue Copic colours. Then I covered the whole area with Ranger Inkssentials – Glossy Accents and let it sit overnight to dry. The next day, I finished colouring in the trees, leaving the snow drifts white. I also coloured in the sky and then used various sizes of Gelly Roll Sakura Pens to create the snow.

Lastly, I completed the background snow using some BV20, C0 and Colorless Blender and then to add some sparkle, I spread glue randomly over the snowy areas and tree tops and added glitter.

I coloured in the moose and fussy cut around him and then popped him up as well as the background onto the card. I thought it would be fun to do his socks in the traditional “Roots” fashion. I also used the Gelly Roll pen to create some movement on the ice below the moose.

For the sentiment, I wanted it to have some sparkle like the snow. To do this, I inked the sentiment on white paper and then used some Sookwang double-sided tape to cover it. I peeled off the tape and then sprinkled Crystal Glitter Ritz – Warm Highlight – Transparent Ultra Fine Glitter and burnished it with my finger. (Rubbing it until it was smooth). I added some double-sided pop-up tape and added it to my card to finish it off.

Lastly, I added some green ribbon and some pop-dots for the last finishing touches.

Card Recipe:

Stamps: Skating Mudzie – R064 (High Hopes Rubber Stamps), Frozen Skating Pond – S074 (High Hopes Rubber Stamps)

Sentiment: Sparkle In Ice – H156 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Forest Moss

Paper: Copic Marker X-Press It Blending Card, American Crafts – Merry and Bright 6 x 6″ pad, American Crafts – Holiday – 6 x 6″ (15.2 x 15.2 cm) paper pack

Die Cut: My Creative Time -Stitched Squares Inside and Out

Tools \ Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Crystal Glitter Ritz – Warm Highlight, Jot Stickers: Pop-Up, Crafts Ribbon – 02-0201044

Image coloured with Copic Markers:

Moose: E37, E35, E33, E31, R22

Antlers: E25, E23, E21

Skates: W9, W7, W5, C3, C1, C0, Wink of Stella – Clear

Sweater: R59, R37, R35

Socks: C4, C3, R37

Trees: G99, G21, YG67, YG17

Ice: B01, B00, B000, B0000, Ranger Inkssentials – Glossy Accents

Sky: B99, B39, B37, B34, B32, Gelly Roll Sakura #10 Pen, Gelly Roll Sakura #5 Pen

Snow: BV20, C0, Colourless Blender, Recollections Extra Fine Glitter – Snow

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.