Archives

Pre-Colored Snowflake Gnome!

Dec18

Today I’m sharing a Christmas CAS card that I made using KLM Digital Designs – Pre-Colored Snowflake Gnome from the new December 2024 Release. This pre-coloured image makes it very easy to create lots of last minute Christmas cards.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Whimsy Stamps – Blurry Flurries paper was cut to the same size and applied to the base card using double-sided tape.

The image was printed out onto Copic Marker X-Press It Blending Card and fussy cut. Joy Crafts – Merry Christmas Cutting Stencil was die cut using a Cuttlebug and Lawn Fawn – Sparkle Cardstock in “Pixie Dust” paper. This was applied along the top of the card using liquid glue. With a spatula, DecoArt Snow-Tex was applied along the bottom of the card and then some glitter was sprinkled onto it while it was still wet. Gentle pressure was used to push the glitter into the DecoArt Snow-Tex. U-Line Double-Sided Foam Tape was applied to the upper part of the image and it was popped up onto the card. Lastly, Stickles – Diamond was applied along the bottom of the feet.

Card Recipe:

Stamp: KLM Digital Designs – Pre-Colored Snowflake Gnome

Sentiment Die: Joy Crafts – Merry Christmas Cutting Stencil (6002/0683)

Inks: HP Printer

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Whimsy Stamps – Blurry Flurries WSDP25 (6″ x 6″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Miscellaneous: U-Line Double-Sided Foam Tape, DecoArt Snow-Tex, Stickles – Diamond

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

NOTE: KLM Designs will be closing as of January 1st, 2025. All physical stamps are now $2.50!
Stock up while supplies last!


Sitting Gnome – Flower Pot!

Dec13

Today I’m sharing a Spring card that I made using KLM Digital Designs – Sitting Gnome – Flower Pot from the new December 2024 Release.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Using Tim Holtz Distress Oxide Ink – Salty Ocean and a blending brush, I applied the clouds in the sky with stencils that I had made previous using Avery Elle – Pierced Clouds Die. The grass was added in using Tim Holtz Distress Oxide Inks – Mowed Lawn and Lawn Fawn – Clippings – Slimline Grassy Hillside Stencils.

The image was printed out onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers listed below.  Using a Quickie Glue pen, I added some glitter to the butterfly dots, leaves and petals on the flowers. The image was fussy cut and a black marker was applied around the entire image. I applied a shadow in the grass where I knew I was going to position the flower pot. Then using stamps from Lawn Fawn – Garden Before ‘n Afters, I applied the sentiment with Versa Fine – Onyx Black ink. Ranger – Clear Super Fine Detail embossing powder was applied over top of the ink and then heat embossed using a Marvy Uchida – Embossing Heat Tool. U-Line Double-Sided Foam Tape was applied to the image and it was popped up onto the card.

Card Recipe:

Stamp: KLM Digital Designs – Sitting Gnome – Flower Pot

Sentiment: Lawn Fawn – Garden Before ‘n Afters

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Oxide Ink – Salty Ocean, Tim Holtz Distress Oxide Inks – Mowed Lawn,

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Stencils: Avery Elle – Pierced Clouds Die (D-05-01), Lawn Fawn – Clippings – Slimline Grassy Hillside Stencils

Miscellaneous: U-Line Double-Sided Foam Tape, Quickie Glue, Glitter, Ranger – Clear Super Fine Detail embossing powder, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Beard: YR68, YR31, YR18, Y38

Shirt: BG09, BG05, BG02, BG01

Pants: B99, B97, B95, B91

Socks: BG09, BG05, BG02, BG01, R46, R14, R08, C02, C01, C00

Hat: R46, R24, R14, R08

Shoes: 100, W9, W7, W5

Flower Pot: E57, E35, E33, E31

Leaves: G16, YG25, YG23

Flower and Buds: YR16, YR12, Y38, Y35, Y17, Y15, Y11, Y06, E15

Butterfly: Y35, Y15, Y08, E27, W9

Grass Shadow: YG25, YG23, YG03

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Owl – St. Patrick’s Day!

Dec10

Today I’m sharing a St. Patrick’s Day card that I made using KLM Digital Designs – Owl – St. Patrick’s Day from the new December 2024 Release.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers, then fussy cut. I stamped the sentiment from Lawn Fawn – Celebration Scripty Sentiments using my MISTI and Tim Holtz Distress Oxide Ink – Lucky Clover onto Hammermill – Premium Cardstock 110 lb., then fussy cut around it. With a Cuttlebug and dies from Spellbinders Nestabilities – Classic Scalloped Ovals (LG) and Lawn Fawn – Magic Iris Behive Add-on, I die cut the large oval and tree branch. A Copic MultiLiner Sepia 0.1 was then applied to the branch to create some bark lines and Tim Holtz Distress Ink – Pine Needles was applied all around the oval die cut using a sponge dauber.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Green cardstock from my stash was cut to the same size as the base and applied with double-sided tape. Doodlebug – Happy-Go-Lucky paper was cut to the size of 4-1/8″ x 5-3/8″. Tim Holtz Distress Inks – Peeled Paint was applied all around the edges and the it was popped up onto the centre of the card using U-Line Double-Sided Foam Tape. U-Line Double-Sided Foam Tape was applied to the backs of the coloured image, oval, tree branch and sentiment and then they were popped up onto the card. Lastly, Kraftin’ Kimmie Fruity dots were added to complete the card.

Card Recipe:

Stamp: KLM Digital Designs – Owl – St. Patrick’s Day

Sentiment: Lawn Fawn – Celebration Scripty Sentiments

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Ink – Pine Needles, Tim Holtz Distress Inks – Peeled Paint, Tim Holtz Distress Oxide Ink – Lucky Clover, Green and Brown cardstock from stash

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Doodlebug – Happy-Go-Lucky (12″ x 12″)

Die Cuts: Spellbinders Nestabilities – Classic Scalloped Ovals (LG), Lawn Fawn – Magic Iris Behive Add-on

Miscellaneous: U-Line Double-Sided Foam Tape, Pental Slicci – Gold 8.0 pen, Copic MultiLiner Sepia 0.1, Kraftin’ Kimmie Fruity dots

Image coloured with Copic Markers:

Owl: YR23, Y15, Y11, Y00, E53, E43, E42, E41, E40, E37, E35, E34, B39, B37, BV25, W9, W7,

Hat: G07, YG25, YG23, YG11, W9, W7, W5, Colorless Blender, Pental Slicci – Gold 8.0 pen (Gold band on hat)

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Sleeping Polar Bear!

Dec4

Today I’m sharing a Christmas card that I made using Pink Gem Designs – Sleeping Polar Bear and a mixture of sentiments from Lawn Fawn – Penguin Party and Lawn Fawn – Winter Skies which I thought went great with this super adorable image!

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and then die cut using a Cuttlebug and My Creative Time – Rectangle Frame Layers. The image was coloured in with Copic markers and then a White Gelly Roll Sakura #10 Pen was applied to create the snow falling from the sky. Stickles – Frosted Lace was applied to the top of the snow, snow drifts, igloo and on the white parts of the hat. I just love the way it glistens!

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Using some scrap Hammermill – Premium Cardstock 110 lb., I inked the paper using a finger dauber with Tim Holtz Distress Inks – Festive Berries that I still had on it. Then using a MISTI and VersaMark ink, I used Lawn Fawn – Penguin Party for the “Merry Christmas” sentiment and Lawn Fawn – Winter Skies for the “Hope your dreams come true” sentiment. Ranger Embossing Powder White – Extra Fine Detail was applied to both sentiments and then the embossing powder was heated with a Marvy Uchida – Embossing Heat Tool. Next, I used a cutter to cut close to the sentiment on the Recollections – Black cardstock and a Cuttlebug with Nellie’s Choice Multi Frame Die – Round Lily – MFD030 to cut the smaller sentiment. Gina Marie Designs – Nested Scalloped Stitched Rectangles were used to die cut the background border out of Crafter’s Companion Luxury Cardstock – Red Matte finish. Lastly, with a cutter, Stampin’ Up – Snowflake Splendor Designer Series Paper was cut to the same size as the base card and then edges were inked around using a finger dauber and Tim Holtz Distress Ink – Blueprint Sketch.

The card was now read to assemble. U-Line Double-Sided Foam Tape was applied all of the die cuts and sentiments. They were then popped up and layered onto the card and image.

Card Recipe:

Stamp: Pink Gem Designs – Sleeping Polar Bear

Sentiments: Lawn Fawn – Penguin Party, Lawn Fawn – Winter Skies

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Inks – Festive Berries, Tim Holtz Distress Ink – Blueprint Sketch, VersaMark

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Stampin’ Up – Snowflake Splendor Designer Series Paper, Crafter’s Companion Luxury Cardstock – Red – 8.5 x 11″, Recollections – Black cardstock

Dies: Gina Marie Designs – Nested Scalloped Stitched Rectangles, Nellie’s Choice Multi Frame Die – Round Lily – MFD030, My Creative Time – Rectangle Frame Layers

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: U-Line Double-Sided Foam Tape, White Gelly Roll Sakura #10 Pen, Stickles – Frosted Lace, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Polar Bear: B91, C1, C0, Colorless Blender, R02, R01, R00

Hat: R59, R37, R35, R24, B91, C01, C0, Colorless Blender, Stickles – Frosted Lace

Presents and Bows: BG09, BG05, BG02, BG01, E15, YR24, Y35, Y08, R59, R37, R35

Lollipops: G16, YG25, YG23, R46, R14, R08, R37, R35, C1, C0

Santa Sign: R59, R46, R14, R08, C1, C0

Sky: B29, B28, B26, B24, Gelly Roll Sakura #10 Pen

Snow: B91, C1, C0, Colorless Blender, Stickles – Frosted Lace

Hope you like it and have a great week!

Happy Pawlidays!

Nov25

Today I’m sharing another Christmas card that I made using KLM Digital Designs – Kitty – Santa Hat from the new November 2024 Release. This image also comes with the 2 other sentiments, “Merry Christmas” and “Santa Paws is Comin’ to town”. Purrrfect for all of the cat lovers out there or for your own little kitty cat! LOL!

The image and sentiment were printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. The image was coloured in with Copic markers and a Prismacolor Premier black pencil was used to colour in the eyes and the whiskers.  Sakura Glaze – Black Pen was used to colour in the nose and a White Gelly Roll Sakura #10 Pen was used to create the highlight. The White Gelly Roll Sakura #10 Pen was also applied to the sky and highlights on the snow drifts. Stickles – Diamond was applied to the top of the snow and on the white parts of the hat.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Recollections – Navy Cardstock was cut to the same size as the base card and it was adhered to it with liquid glue. U-Line Double-Sided Foam Tape was applied to the completed image and it was popped up onto the  centre of the card.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Kitty – Santa Hat

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Navy Cardstock

Miscellaneous: U-Line Double-Sided Foam Tape, Sakura Glaze – Black Pen, White Gelly Roll Sakura #10 Pen, Stickles – Diamond

Image coloured with Copic Markers:

Cat: C8, C7, C6, C5, C4, C3, R29, R27, R24, R02, R01, R00, PrismaColor Premier Pencil – Black, Sakura Glaze – Black Pen, Gelly Roll Sakura #10 Pen (Nose)

Hat: R59, R37, R35, R24, B91, C01, C0, Colorless Blender, Stickles – Diamond

Sky: B04, BO2, B01, B00, Gelly Roll Sakura #10 Pen

Snow: B91, C1, C0, Colorless Blender, Gelly Roll Sakura #10 Pen, Stickles – Diamond

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Christmas Tree Gnome!

Nov22

Today I’m sharing a Christmas card that I made using KLM Digital Designs – Christmas Tree Gnome II from the new November 2024 Release.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock.  The image was printed out onto Copic Marker X-Press It Blending Card using High Quality Grayscale and then it was die cut using a Cuttlebug and My Creative Time – Rectangle Frame Die Layers (3.5″ x 4.75″). The image was then coloured in with Copic markers listed below.  A white Gelly Roll Sakura #10 Pen was used to create the white snow in the sky and also the sparkles on the snow drifts on the ground. Recollections – Red cardstock was cut to the size of approximately x 3.75″ x 5″ and the finished image was directly applied to this using liquid glue. Once again, liquid glue was applied to the red rectangle and it was adhered directly to the base card. Finally to finish it off, I popped up a sentiment from Creative Expressions – Wordies Sentiment Sheets – Christmas Script (CEW022) using U-Line Double-Sided Foam Tape.

Card Recipe:

Stamp: KLM Digital Designs – Christmas Tree Gnome II

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Red cardstock

Die Cut: My Creative Time – Rectangle Frame Die Layers – MCT-D274

Miscellaneous: U-Line Double-Sided Foam Tape, Gelly Roll Sakura #10 Pen, Creative Expressions – Wordies Sentiment Sheets – Christmas Script (CEW022)

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000, R24, R22

Sweater:  R59, R37, R35, BG09, BG05, BG02, BG01, C2, C1

Pants: B99, B97, B95, B91

Hat: R59, R37, R35

Boots: C9, C7, C7, C3

Mitten: R59, R37, R35, BG09, BG05, Gelly Roll Sakura #10 Pen

Tree and Branches: E59, E29, E27, E25, E21, G99, YG67, YG63, YG61

Sky: B06, B05, B04, B02

Snow: B91, C1, C0, Colorless Blender, Gelly Roll Sakura #10 Pen

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Thankful for You!

Nov12

Today I’m sharing a simple Thanksgiving card that I made using KLM Digital Designs – Pre-Colored Dinosaur Pumpkin from the new November 2024 Release. Our Canadian Thanksgiving has past, but the American Thanksgiving is happening soon!

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock.  Chocolate brown paper from the Creative Memories – Croptoberfest 2021 Sampler Pack , was cut to the same size as the base and adhered to the card. Next, I cut 2 strips from PhotoPlay – Gnome for the Holidays Thanksgiving paper to the size of 4-1/8″ x 1″ and some Thanksgiving paper 4-1/8″ x 3-3/8″ from my scrap stash paper. The followings inks were used to apply ink around the edges of the papers: Tim Holtz Distress Ink – Carved Pumpkin, Tim Holtz Distress Ink – Aged Mahogony and Tim Holtz Distress Inks – Peeled Paint. All of the pieces were adhered to the base with liquid glue.

I chose a sentiment from PhotoPlay – Autumn Greetings by Becky Moore – Element Stickers and applied it to some regular cardstock and then fussy cut around it. U-Line Double-Sided Foam Tape was applied to the image and sentiment and both items were popped up onto the card. Kraftin’ Kimmie  Dots were added to the bottom to complete the card.

Card Recipe:

Stamp: KLM Digital Designs – Pre-Colored Dinosaur Pumpkin

Sentiment: PhotoPlay – Autumn Greetings by Becky Moore – Element Stickers

Inks: HP Printer, Tim Holtz Distress Ink – Carved Pumpkin, Tim Holtz Distress Ink – Aged Mahogony, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Creative Memories – Croptoberfest 2021 Sampler Pack (12″ x 12″), PhotoPlay – Gnome for the Holidays Thanksgiving

Miscellaneous: U-Line Double-Sided Foam Tape, Kraftin’ Kimmie Dots

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Purfect Birthday!

Nov1

Today I’m sharing a birthday card that I made using KLM Digital Designs – Kitty – Flower Pot from the new October 2024 Release. This image also comes with the 2 other sentiments, “Let’s Pawty!” and “Hugs, kisses and a lot of Birthday wishes“.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Forever in Time – Birthday Blast was cut to the size of 2″ x 5.5″ and adhered to the base with liquid glue.

The image and sentiment were printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. The image was coloured in with Copic markers and a Prismacolor Premier black pencil was used to colour in the eyes, the whiskers and add some deeper definition to the cat’s facial features and flower centres. Sakura Glaze – Black Pen was used to colour in the nose. Once the colouring of the image was completed, Copic marker BG000 was used to colour around the entire image and then it was fussy cut leaving a slim border. The sentiment was fussy cut and then attached to a scrap piece of Recollections – Matte Gold Foil cardstock using liquid glue. Once again, the sentiment was fussy cut.

The card was now ready to assemble. U-Line Double-Sided Foam Tape was applied to the image and sentiment. Both items were popped up onto the card. Kraftin’ Kimmie – Fruity Dots were added to complete the card.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Kitty – Flower Pot

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Forever in Time – Birthday Blast – 6″x6″ paper, Recollections – Matte Gold Foil cardstock

Miscellaneous: U-Line Double-Sided Foam Tape, Kraftin’ Kimmie – Fruity Dots, Sakura Glaze – Black Pen

Image coloured with Copic Markers:

Cat: C8, C7, C6, C4, C3, R29, R27, R24, R02, R01, R00, PrismaColor Premier Pencil – Black, Sakura Glaze – Black Pen (Nose)

Flower Pot: E99, E97, E95, Colorless Blender

Flowers and Leaves: E15, Y19, Y17, Y15, Y11, Y08, G16, YG25, YG23

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Sweet As Candy Canes!

Oct22

Today I’m sharing a Christmas card that I made using KLM Digital Designs – Candy Cane Gnome II from the new October 2024 Release. This image also comes with 2 more sentiments, “Sugar & Stripes and everything nice!” and “Cane you believe it’s Christmas?”.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. I had some dark green cardstock in my stash and decided to cut it to the same size as the base and glue it on. I loved the beautiful patterned paper from Craft Smith – Peppermint Twist and thought it went great with the image, so I cut that to be 4.25″ x 4.25″. The edges were inked around with Tim Holtz Distress Inks – Festive Berries and it was adhered to the centre of the card. AC Premium Candy Cane Ribbon was applied to the top and bottom of the card using double-sided tape.

The image and sentiment were printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and the image was coloured in with Copic markers listed below. Clear – Wink of Stella was then applied over all of the candy cane to make it sparkle. Both the image and the sentiment were fussy cut leaving a small white border around the image. The sentiment was coloured with YG61 Copic marker and then edged with a finger dauber and Tim Holtz Distress Ink – Rustic Wilderness.

The card was now ready to assemble. U-Line Double-Sided Foam Tape was applied to the image and sentiment and they were popped up onto the card. To finish it off 3 candy canes were added from Eyelet Outlet & Brads – Candy Cane using 2 layers of U-Line Double-Sided Foam Tape after I had removed the back tabs from them.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Candy Cane Gnome II

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Ink – Rustic Wilderness, Tim Holtz Distress Inks – Festive Berries

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Craft Smith – Peppermint Twist (6″x6″), Green Cardstock

Miscellaneous: U-Line Double-Sided Foam Tape, AC Premium Ribbon, Eyelet Outlet & Brads – Candy Cane, Clear – Wink of Stella

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard and Hair:  C5, C4, C3, C2, C1

Hat and Pants: R46, R14, R08

Mittens and Leaves: G99, YG67, YG63, YG61

Candy Cane: R46, R14, R08, C1, C0, Colorless Blender

Shoes: 100, C9, C7, C5, C4, C2

Berries: R89, R37

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Harvest Blessings!

Oct8

Today I’m sharing a Thanksgiving card using KLM Digital Design – Harvest Gnome II from the new October 2024 release that I made. This image also comes with 2 more sentiments, “Leaves are falling, Autumn is calling” and “Pumpkin Kisses and Harvest Wishes”. I’d like to wish everyone a wonderful Canadian Thanksgiving this coming weekend!

I began with a 5.5″ x 4.25″ base card using Hammermill – Premium 110 lb. Cardstock. The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then I printed it out a second time onto regular copy paper and fussy cut around the top part of the image. I used this as a mask on the card. Using cloud stencils that I had created previously out of Avery Elle – Pierced Clouds Dies, I created the clouds using a blending brush and Tim Holtz Distress Ink – Salty Ocean. I trimmed the image down to be the same size as the base and adhered it to the card using liquid glue.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Harvest Gnome II

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Dies \ Stencils: Avery Elle – Pierced Clouds Die (D-05-01)

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: YR18, YR16, YR12, E08

Shirt: E89, E87, E84, E81

Hat and Jeans: B99, B97, B95, B91

Boot: E35, E33, E31, E27, E25, E23

Apples and Leaves: G16, YG67, YG63, YG61, YG25, YG23, YG21, YG05, YG03, YG01, R39, R27, R24, R22

Pumpkins: YR18, YR16, YR12, Y08, E08, E89, E87, E84

Crate: E59, E57, E55, E53

Grass: YG67, YG25, YG23, YG13, YG11

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Fa La La La!

Sep27

Today I’m sharing a Christmas card that I made using KLM Digital Designs – Window Kitty from the new September 2024 Release.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Tim Holtz Distress Ink – Evergreen Bough was applied around the outside edges with a finger dauber and a blender brush was used to apply ink around the inner edges of the card base.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. With a Cuttlebug, Sizzix Rounded Tags were used to die cut the image and Recollections – Black cardstock. The image was coloured in with Copic markers and a Prismacolor Premier black pencil was used to add in some finer fur lines, the whiskers and to blacken around the mouth, nose and eyes.

The card was now ready to assemble. U-Line Double-Sided Foam Tape was applied to the image and large rounded tag. Both were applied together and popped up onto the card. A sentiment from Creative Expressions – Wordies Sentiment Sheets – Traditional Christmas was cut out and adhered to the card using Scrapbook Adhesives – 3D Foam Strips. Lastly, the snow flakes were added with a Gelly Roll Sakura #10 Pen.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Window Kitty

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black cardstock

Die Cuts: Sizzix Rounded Tags – 8 dies

Miscellaneous: U-Line Double-Sided Foam Tape, Creative Expressions – Wordies Sentiment Sheets – Traditional Christmas (CEW008), Gelly Roll Sakura #10 Pen, Scrapbook Adhesives – 3D Foam Strips

Image coloured with Copic Markers:

Cat: BV29, BV25, C4, W9, R89, R59, R56, R46, R29, R27, R24, R02, R01, R00

Brick Wall and Mortar: E19, E17, E13, C5, C3, C1

Drapes: BG72, BG57, BG32, BG11

Floor and Wall: E29, E27, E25, E23, Y17, Y15, C3, C1, R27

Window, Window Sill and Window Frame: BG000, C9, C7

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Owl – Holidays!

Sep24

Today I’m sharing a Christmas card that I made using KLM Digital Designs – Owl – Santa Hat from the new September 2024 Release. This image also comes with 2 other sentiments, “Merry Christmas” and “Owl I want for Christmas is you” besides the sentiment that I have used one this card.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Light Blue cardstock and Recollections – Christmas Snow Globe Vellum were cut to the same size as the base. The blue cardstock was attached with double-sided tape and the vellum was attached over top of this with liquid glue. The glue was only applied to the bottom of the vellum and then behind some snowflakes where the glue would not show. Lawn Fawn – Sparkle Cardstock in “Pixie Dust” was cut to the size of 4.25″ x 1.5″ and then cut with scissors to create the wavy ground. This was popped up onto the vellum using U-Line Double-Sided Foam Tape. Trees were then added under the hill that were created at an earlier time using my Cricut Explore and .svg files from Miss Kate Cuttables – Snowy Tree using liquid glue.

The image and sentiment were printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers, then fussy cut. Sakura Glaze – Black pen was used to apply the dot in the eye and a black marker was used to go around the entire out-line of the owl. Cosmic Shimmer Fluffy Stuff was then applied to the hat fringe and pompom. A Marvy Uchida – Embossing Heat Tool was used to heat the liquid to create the fluff effect. Using my finger, I dabbed Stickles – Diamond over the top of the fluff on the hat and pompom.  Stickles – Diamond was also applied to the tops of the snow pieces on the trees.

Once the Stickles dried, 2 layers of U-Line Double-Sided Foam Tape and some liquid glue were applied to the back of the image and 1 layer was applied to the sentiment. Both items were popped up onto the card. Lastly, Recollections – Snowflake Specialty Polyester Glitter was placed onto the card to hide where the glue seeped through the Vellum.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Owl – Santa Hat

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Light Blue Cardstock, Recollections – Christmas Snow Globe Vellum (12″x12″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Die Cuts: Miss Kate Cuttables – Snowy Tree (10342) (.svg)

Miscellaneous: Sakura Glaze – Black pen, U-Line Double-Sided Foam Tape, Cosmic Shimmer Fluffy Stuff, Recollections – Snowflake Specialty Polyester Glitter, Stickles – Diamond

Image coloured with Copic Markers:

Owl: Y38, Y35, Y17, Y13, E79, E53, E51, E50, E25, E23, E21, B39, B37, W9, W7,

Hat: BG09, BG05, BG02, BG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Floral Horseshoe – Pansies

Sep23

Today I’m sharing a CAS card that I made using KLM Digital Designs – Floral Horseshoe – Pansy from the new September 2024 Release.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Cuttlebug Embossing Folder – Swiss dots and a Cuttlebug were used to create the background on Hammermill – Premium Colour 100 lb. cardstock, cut to the size of 4″ x 5.25″. This was popped up onto the base card using U-Line Double-Sided Foam Tape.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers, then fussy cut. A Sakura Glaze – Black pen was used to apply the dot in the eye. Recollections – Purple Passions paper was cut to the size of 4″ x .75″. U-Line Double-Sided Foam Tape was applied to this and it was centred and popped up onto the Swiss Dots background. Crafter’s Companion Luxury Cardstock – Silver  was die cut 3 times using a Cutttlebug and “Good Luck” die from PaperCrafter Today – 15 Die Cut Sentiment Set. I glued the die cuts together with liquid glue to give them an embossed look and then glued them to the sentiment strip. Lastly, Kraftin’ Kimmie – Dazzling Dots were applied around the sentiment to finish off the card.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Floral Horseshoe – Pansy

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Purple Passions 8.5″ x 11″, Crafter’s Companion Luxury Cardstock – Silver – 8.5 x 11″

Embossing Folder: Cuttlebug Embossing Folder – Swiss dots

Die Cuts: PaperCrafter Today – 15 Die Cut Sentiment Set

Miscellaneous: Sakura Glaze – Black pen, U-Line Double-Sided Foam Tape, Kraftin’ Kimmie – Dazzling Dots

Image coloured with Copic Markers:

Horseshoe: C5, C3, C2, C1

Flowers: E15, Y17, Y15, Y11, Y08, V17, V12, V09, V000, RV14, RV13, RV11, RV000

Bird: E99, E97, YR20, YR16, YR15, YR12, Y32, B39, B14, B12, B06, B05, B000, BG01, C7

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Pilgrim Gnome!

Aug20

Today I’m sharing a Thanksgiving card using KLM Digital Design – Pilgrim Gnome from the new August 2024 release that I made. This image also comes with 2 more sentiments, “There is always something to be thankful for” and “Oh my gourd, you’re handsome”. Canadian Thanksgiving is only a couple of months away, time to start preparing now!

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then fussy cut leaving a thin white border. I wanted the image to stand out on the card, so I attached the image to Recollections – Black cardstock and repeated the process. The sentiment was trimmed down to 3.75″ x  1″. The edges were inked with Tim Holtz Distress Ink – Aged Mahogony and Tim Holtz Distress Ink – Fossilized Amber. The sentiment was attached to Recollections – Black cardstock using liquid glue and trimmed down to 3-7/8″ x 1-1/8″.

The card was now ready to assemble.  I began with a 5.5″ x 4.25″ base card using Hammermill – Premium Cardstock 110 lb.. Thanksgiving paper was trimmed to be the same size as the base and was attached with liquid glue. Tim Holtz Distress Ink – Aged Mahogony and a finger dauber were used to ink around all of the edges of the card. U-Line Double-Sided Foam Tape was applied to both the image and sentiment and both were popped up onto the card.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Pilgrim Gnome

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Aged Mahagony, Tim Holtz Distress Ink – Fossilized Amber

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black

Miscellaneous: U-Line Double-Sided Foam Tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R22, R20

Hair and Beard: YR68, YR31, YR18, Y38

Man’s Top and Socks: E79, E59, E57, E55

Man’s Pants: W5, W3, W1

Shoes, Man’s Hat and Belt: W9, W7, W5, W1

Hat Band: C5, C3, C1

Buckles: E15, Y28, YR24, YR23

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Floral Horseshoe – Cosmos

Aug19

Today I’m sharing a CAS card that I made using KLM Digital Designs – Floral Horseshoe – Cosmos from the new August 2024 Release.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. This prevents the image from smearing when you go to colour it in. The image was coloured in with Copic markers and then cut to the size of 4″ x 5.25″. The base card was cut to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock . A Sharpie – Gold Medium Point – Water Based Paint marker was used to go around the image and the base card. The image was then adhered to the base card with liquid glue. YNS Gumdrops were applied to finish the card off!

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Floral Horseshoe – Cosmos

Inks: HP Printer High Quality Grayscale, Sharpie – Gold Medium Point – Water Based Paint, Sakura Glaze – Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Miscellaneous: YNS Gumdrops

Image coloured with Copic Markers:

Horseshoe: C5, C3, C2, C1

Flowers: BV17, BV13, BV11, BV000, E15, Y38, Y18, Y04

Leaves: BG99, BG93

Bird: E99, E97, YR20, YR16, YR15, YR12, Y32, B39, B14, B12, B06, B05, BG01, C7

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

When Someone Means So Much!

Aug3

Today I’m sharing a simple card using KLM Digital Design – Pen Pal Gnome from the July 2024 release that I made. This image also comes with 2 more sentiments, “I miss you everyday, but today you get a card” and “Better than a text”.

To make this card, I began with Hammermill – Premium Cardstock 110 lb. cut to the size of 5.5″ x 4.25 for the base card.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card and the image was coloured in with Copic markers listed below. For some finer lines for the feathers, Prismacolor Premiere pencils were added after doing the base with the Copic markers. The finished image and sentiment were cut down to the same size as the base and applied to the base card using double-sided tape.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Pen Pal Gnome

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Miscellaneous: Double-Sided Tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: W3, W1, W00

Shirt: BG72, BG57, BG32, BG11

Hat and Pants: B99, B97, B95, B91

Shoes: E27, E25, E23

Feather and Ink: BV29, YR30, E40, E41, E42, E43, E44, (Prismacolor Premiere Pencils: PC1076, PC1074, PC1072)

Shadow: C2, C1, C0

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Hi There!

Jul27

Today I’m sharing a card using KLM Digital Design – Pre-colored Toad 1 from the new July 2024 release. This stamp is pre-coloured and can be used in so many different ways. You just have to use your imagination!

I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Cardstock 110 lb. cardstock.  For the background, I cut Reminisce – The Menagerie Kit paper to the sizes of 5-3/8″ x 4-1/8″ and 2 pieces at .5″ x 4-1/8″. Recollections – Green cardstock was cut to the size of .75″ x 4-1/8″.  All of the edges were inked with Tim Holtz Distress Inks – Peeled Paint and then applied to the base card using double-sided tape.

The image was imported into Microsoft Word and I wanted the toad to be sitting on a lily pad, so within Microsoft Word, I added in an oval shape and then a triangular shape. The oval shape was made green and the triangle shape was made white. I positioned the toad where I wanted it to go and then printed out the combined image onto Copic Marker X-Press It Blending Card.  Once the completed image was printed, I fussy cut around the image and attached it to some Recollections – Green cardstock with some tape and liquid glue. Once again, I fussy cut around the image. From the patterned paper, I also cut a couple of the lily pad flowers and popped them up on the lily pad using U-Line Double-Sided Foam Tape. Using a Cuttlebug, Lawn Fawn Lawn Cuts – Henry’s 123s, Lawn Fawn Lawn Cuts – Henry’s ABCs and Recollections – Black cardstock, I die cut the sentiment twice and then glued the pieces together. For the exclamation mark, I die cut 5 so that the dot would be at the same height as the other letters.

The card was now ready to assemble. I applied U-Line Double-Sided Foam Tape to the finished image and popped it up onto the centre of the card. Liquid glue was added to the centre of each letter and they were adhered to the base card.

Card Recipe:

Stamp:  KLM Digital Design – Pre-colored Toad 1

Sentiment: Lawn Fawn Lawn Cuts – Henry’s 123s, Lawn Fawn Lawn Cuts – Henry’s ABCs

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Reminisce – The Menagerie Kit 1 (12″ x 12″), Recollections – Black cardstock, Recollections – Green cardstock

Miscellaneous: U-Line Double-Sided Foam Tape

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Pansies Floral Basket!

Jul11

Today I’m sharing a card using KLM Digital Design – Floral Basket – Pansies from the new July 2024 release. This stamp also comes with 2 other sentiments, “You Grow Girl!” and “Let me plant one on ya!“.

I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Cardstock 110 lb. cardstock. Recollections – Matte Gold Foil cardstock was cut to the same size and then adhered directly to the base using double-sided tape. Kate Knight – Spring Fling Designer Paper was cut to the size of 5.25″ x 4″. With a finger dauber and Tim Holtz Distress Ink – Prize Ribbon, I inked around  the outer edges. The finished piece was applied to the base using double-sided tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card.  I wanted 2 of the top flowers to pop, so I cropped them in Microsoft Word and printed them out as well. Copics were used to colour in the image and then it was fussy cut leaving a thin white border around it. I applied this to Recollections – Black cardstock and then fussy cut again. This piece was then applied to Recollections – Matte Gold Foil cardstock and the fussy cut one last time. The sentiment was fussy cut and applied to Recollections – Matte Gold Foil cardstock and fussy cut again. With Recollections – Blue cardstock, I cut a piece to be the size of 5.25″ x 1.25″ and then inked around the edges with Tim Holtz Distress Ink – Prize Ribbon. From the Recollections – Matte Gold Foil cardstock, I cut 2 strips of 5.5″ x 1/8″.

The card was now ready to assemble. I applied U-Line Double-Sided Foam Tape to the finished image, sentiment and 2 flowers and positioned them to where I wanted then to go. With double-sided tape, I adhered the blue strip to the bottom of the card. Liquid glue was applied to the 2 thin gold strips and they were placed above and below the blue strip. The sentiment, flower basket and 2 flowers were then popped up onto the card. Lastly, I added in some bling using Buttons Galore & More – Blueberry gems.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Floral Basket – Pansies

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Prize Ribbon

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Matte Gold Foil cardstock, Kate Knight – Spring Fling Designer Paper Stack (Cardmaking & Papercraft 2012), Recollections – Blue cardstock

Miscellaneous: U-Line Double-Sided Foam Tape, Buttons Galore & More – Blueberry gems

Image coloured with Copic Markers:

Leaves: G16, YG25, YG23, YG21

Flowers: E15, Y17, Y15, Y11, Y08, V09, V06, V04, RV14, RV13, RV11, B79, B66, B63

Basket: YR27, YR24, YR23, YR21

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Little Girl Gnome and Pup!

Jun27

Today I’m sharing a card using KLM Digital Design – Little Girl Gnome & Pup from the new June 2024 release that I made. This image also comes with 2 more sentiments, “you’re so doggone cute!” and “I wuff you”. All my life, I grew up with pets. They always brought so much joy and laughter to the home and were all so unique!

To make this card, I began with a 5.5″ x 4.25 base card using Hammermill – Premium Cardstock 110 lb.. Recollections – Black cardstock was cut to the same size as the base and was adhered to the card using double-sided tape. Hammermill – Premium Colour 100 lb. cardstock was cut to the same size as the base. I spritzed the front and back of the cardstock and then using Kraftin’ Kimmie – Pawprints 2 stencil, a rubber mat and my Cuttlebug, I embossed the paper. With the stencil still in place on the paper, using Tim Holtz Distress Ink – Black Soot and Tim Holtz Distress Inks – Candied Apple and small blending brushes, I inked the pawprints and hearts. Once this was done, I cut the paper to the size of 5-3/8″ x 4-1/8″ and adhered it to the black background using double-sided tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The image and sentiment were coloured in with Copic markers. The freckles were applied to the cheeks using Gelly Roll Sakura #8 Pen and the eyes and nose for the dog were added using a Sakura Glaze – Black pen. Gelly Roll Sakura #8 Pen was applied for the dot in the eyes and accent on the nose for the dog.

My Creative Time -Stitched Squares Inside and Out was used to die cut the image. I applied a border around the image and sentiment using Recollections – Black cardstock. U-Line Double-Sided Foam Tape was applied to both the image and sentiment and they were centered on the card.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Little Girl Gnome & Pup

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Inks – Candied Apple

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black cardstock, Hammermill – Premium Colour 100 lb.

Dies: My Creative Time -Stitched Squares Inside and Out

Stencil: Kraftin’ Kimmie – Pawprints 2

Miscellaneous: Gelly Roll Sakura #8 Pen, Sakura Glaze – Black, U-Line Double-Sided Foam Tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R24

Hair: YR68, YR31, YR18, Y38

Dress and Hat: V17, V15, V12

Shirt: Y17, Y15, Y11

Shoes: E27, E25, E23

Puppy: YR27, YR24, YR23, YR21, R27, R24, R22

Sky: B60, B02, B01, B00, B000, C00, Colorless Blender

Grass: YG17, YG13, YG03, YG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Floral Mug!

Jun19

Today I’m sharing a card using KLM Digital Design – Floral Coffee Cup from the new June 2024 release. This stamp also comes with 2 other sentiments, “Wonderful in every way” and “Enjoy the little moments”. Love how this image can be used with so many wonderful sentiments to fit any occasion!

I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Cardstock 110 lb. cardstock. Hot Buy – Recollections – Jewel Tones was cut to the same size and then adhered directly to the base using double-sided tape. Momenta – Cardstock was also cut to the same size as the base and then Nuvo Glimmer Paste – Moonstone was applied to it using Kraftin’ Kimmie – Krafty Kaleidoscope stencil. I thought this gave it some nice added sparkle! Once it was all dry, I cut the paper to the size of 5.25″ x 4″. With a blending brush and Tim Holtz Distress Ink – Salvaged Patina, I inked around  the outer edges. The finished piece was applied to the background paper using double-side tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. Copics were used to colour in the image and then it was fussy cut.  U-Line Double-Sided Foam Tape was applied to the finished image and it was popped up onto the card.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Floral Coffee Cup

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salvaged Patina

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Momenta – Cardstock, Hot Buy – Recollections – Jewel Tones

Stencil: Kraftin’ Kimmie – Krafty Kaleidoscope

Miscellaneous: U-Line Double-Sided Foam Tape, Nuvo Glimmer Paste – Moonstone, Blending Brush

Image coloured with Copic Markers:

Leaves: G16, YG25, YG23, YG21

Flowers: E15, Y17, Y15, Y08, RV19, RV17, RV14, RV000

Mug: BG15, BG13, BG11,BG10

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.