Tag Archive | Pumpkin

Frightfully Delightful!!!


It’s Wednesday, and this week, I made a card using Frankie – TT021 by High Hopes Rubber Stamps for the main image and Frightfully Delightful – FF054 (High Hopes Rubber Stamps) for the sentiment. Frankie is all set for Hallowe’en this year with his little pumpkin full of candy. We used to use a pillow case when we were younger to get a lot more goodies when we went Trick or Treating. LOL!

To make my card this week, I began with stamping the image and sentiment onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. Using my Brother Scan and Cut, I cut around the image leaving a small white border. I coloured in the image and then used Copic C0 to go around all of the edges. I fussy cut around the sentiment and applied Copic Y17 around the edges. I put this through my Xyron Create a Sticker and then applied it to some scrap yellow cardstock. Once again, I fussy cut around the sentiment.

Using my Cricut Explore, I die cut the Haunted House from the Holiday Cakes Cricut Cartridge and the Haunted Tree from the October 31 Cricut Cartridge. I decided to cut the second layer of the haunted house out of Copic Marker X-Press It Blending Card rather than solid cardstock. This gave me the chance to colour in the windows, doors, shutters and moon the way I wanted to in order to make it more spooky with Copic Markers. The moon was coloured in with a mixture of Tim Holtz Distress Ink – Hickory Smoke, Tim Holtz Distress Ink – Fossilized Amber and Picket Fence Studio Blender Brushes. Using glue, I pieced everything together for the Haunted house.

My card was now ready to assemble. I started with a 6″ x 6″ base card made from AC Cardstock – White. I cut the bats background to the same size from Echo Park – I Love Halloween paper pack. I applied this directly to the base with double-sided tape. Using Tim Holtz Distress Ink – Hickory Smoke and a Picket Fence Studio Blender Brush I inked around all of the edges and across the top of the card to darken the sky a little bit. Next, I die cut the grass using my Cuttlebug, Lawn Fawn – Watercolor Wishes Rainbow paper and Lawn Fawn – Simple Stitched Hillside Borders. I applied this directly to the bottom of the card using liquid glue. I applied glue to the haunted tree and haunted house and then applied both of them directly to background. Frankie and the sentiment were both popped up on the card using 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Frankie – TT021 (High Hopes Rubber Stamps)

Sentiment: Frightfully Delightful – FF054 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Hickory Smoke, Tim Holtz Distress Ink – Fossilized Amber

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Echo Park – I Love Halloween, Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″

Die Cut:Lawn Fawn – Simple Stitched Hillside Borders – Lawn Cut

Cricut Die Cuts: – October 31 – Haunted Tree (#M3DCC2), Holiday Cakes – Haunted House – (#M40A62)

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen, Brother Scan and Cut, Xyron Create a Sticker and Picket Fence Studio Blender Brushes, Cricut Explore

Image coloured with Copic Markers:

Skin: BV23, BV20, G00, BG93, BG90, R29, R24 (Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen)

Hair: 100, B39, B32, C9, C7, C5, C3, PrismaColor Premier – Black

Jacket and Pants: V99, V95, V93, V91

Shirt: C9, C7, C5

Shoes: 100, C10, C9, C7, C5, C3

Bat: BV29, BV25, BV23 (Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen)

Pumpkin: E08, YR18, YR16, YR12, Y15, Y08, C10

Candy: V09, V06, V04, YG17, YG13, YG11

House Background: V17, V15, V09, V06, V04, Y17, Y08, Y04, C3, C2, BV20

Shadow below Frankie: YG17, YG13

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Scarecrow!!


Sharing a card I made today using KLM Digital Designs – Harvest Scarecrow from the new August release. I don’t think the crows are very scared of this scarecrow just chillaxing on a beautiful autumn day.

To make the card, I first imported the image and sentiment into Microsoft Word and printed it out onto Copic Marker X-Press It Blending Card. I die cut the image and frame using my Cuttlebug and My Creative Time – Rectangle Frame Layers dies. I applied painters tape around all of the edges to keep the slim white border around the image. I coloured in the the image with Copic markers and then attached it to the card base from The Paper Studio – Primary Simply Solids (4.25″ x 5.5″) using double-sided tape.

Card Recipe:

Stamp: Harvest Scarecrow – KLM Digital Designs

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, The Paper Studio – Primary Simply Solids (4.25″ x 5.5″)

Die Cut: My Creative Time – Rectangle Frame Layers

Miscellaneous:  Cuttlebug, Gelly Roll Sakura #5 Pen, Sakura Glaze – Black

Image coloured with Copic Markers:

Scarecrow Face and Gloves: E43, E42, E41, E40

Jeans and Hat: B26, B23, B21

Patches: R27, R24, R22, YG17, YG11, YG03

Shirt: W9, W7, YG07, YG05, R27, R24, R05, Gelly Roll Sakura #5 Pen

Shoes: E37, E35, E34, E27, E25, E23

Straw and Hay: YR23, YR21, Y35, YG05

Crows: C9, C7, C5 (Eyes: Sakura Glaze – Black)

Pumpkins: Y04, E08, YR18, YR16, YR12

Gourd: YG63, YG03, Y17, Y15, YR31

Grass and Pumpkin Stems: G99, G21, YG67, YG17

Fence: E29, E27, E25, E23

Sky: R000, RV000, YR000, Y00, B000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Pumpkin Buddies!!!


It’s Wednesday, and this week, I made a card using Pumpkin Buddies – TT020 by High Hopes Rubber Stamps for the main image and Happy Halloween Script – F232 (High Hopes Rubber Stamps) for the sentiment. These little Hallowe’en friends look like they’re getting ready to scare unsuspecting little ones this year. LOL!

To make my card this week, I began with die-cutting Copic Marker X-Press It Blending Card with My Creative Time – Rectangle Frame Layers for the main image and Whimsy Stamps – Quick Strips Die Set for the sentiment. The image and sentiment were then stamped using my MISTI and Memento – Tuxedo Black ink onto the die cuts. The image and grass were coloured in with Copic markers. The nose and eyes for the characters were coloured in using Sakura Glaze – Black Pen and Gelly Roll Sakura #8 Pen. I stamped out the image a second time and used my Brother Scan and Cut to cut it out so that I could use it as a mask to put over the coloured image. I also die cut a 1.5″ circle out of Inkadoo Stamping Mask Paper for the moon.

I placed the mask over top of the coloured image and the moon masked circle onto the large rectangle before I inked in the sky using various Tim Holtz inks listed below. I watched a video on YouTube by Glitter Grunge Greetings for inspiration on how to create my night sky. Once the sky was complete, I removed the mask for the moon and used the outside paper that I had cut the moon from to protect the sky while I inked in the texture for it using Picket Fence Studio Blender Brushes, Tim Holtz Ranger Distress Oxide – Fossilized Amber and Tim Holtz Distress Ink – Hickory Smoke. I spritzed the moon and sky with some water. I removed all of the masks at this point and using double-sided tape, I applied the coloured image to my card base using The Paper Studio – Primary Base Colours 4.25″ x 5.5″. Lastly, I applied some Tim Holtz Ranger Distress Oxide – Fossilized Amber to the outside edges of my sentiment and pop it up on the card using 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Pumpkin Buddies – TT020 (High Hopes Rubber Stamps)

Sentiment: Happy Halloween Script – F232 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Ranger Distress Oxide: Fossilized Amber, Wilted Violet, Black Soot, Faded Jeans and Seedless Preserves, Tim Holtz Distress Ink – Stormy Sky, Chipped Sapphire, Tumbled Glass, Hickory Smoke

Paper: Copic Marker X-Press It Blending Card, The Paper Studio – Primary Base Colours 4.25″ x 5.5″

Die Cuts:  My Creative Time – Rectangle Frame Layers, Whimsy Stamps – Quick Strips Die Set – WSD330

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Sakura Glaze – Black, Pen Gelly Roll Sakura #8 Pen, Brother Scan and Cut, Inkadoo Stamping Mask Paper, Picket Fence Studio Blender Brushes

Image coloured with Copic Markers:

Bat: BV29, BV25, BV23

Pumpkin: E08, YR18, YR16, YR12, Y04, G99, G21, YG67, YG19, Y17, Y15, Y08

Cat: N10, N6, N5, R30, R20, YG06

Dog: E29, E27, E25, E23, E34, E33, E31

Oak Leaves: E13, E07, YR27, YR12

Grass: G99, G21, YG67, YG19

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Small Seeds of Gratitude!!


Today I’m sharing  Harvest II Gnome (KLM Digital Designs) image from the November release. This adorable little Gnome comes with 3 different sentiments. One of them, I have used here. The others are “You are the Pumpkin to my pie” and “For the cutest Pumpkin in the patch”. Happy Thanksgiving to all of our American friends from Canada!

I printed out the main image onto Copic Marker X-Press It Blending Card and the sentiment on to Recollections white paper using my HP Printer. I used my Brother Scan and Cut to cut around the image and coloured it in with Copic markers. The sentiment was inked around the edges with Tim Holtz Distress Ink – Carved Pumpkin. I ran the coloured image and the sentiment through my Xyron Creative Station to make them into stickers and then attached both of them to some Recollections black cardstock. I used my small cutter to cut a small border around the sentiment and fussy cut the small border around the image.

The patterned background is from Echo Park – Happy Fall. I cut it to be 5.5″ x 2″ and then inked around the edges with Tim Holtz Distress Ink – Carved Pumpkin. The card was now ready to assemble. I started out with a white base of 5.5″ x 4.25″. I attached the patterned background directly to the base using double-sided tape. Then I glued the image onto the base. The sentiment was popped up  using 3M VHB – 2 sided tape. To finish off the card, I added in some Kraftin’ Kimmie – Pastel Dots.

Card Recipe:

Stamp and Sentiments: Harvest II Gnome (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Carved Pumpkin

Paper: Copic Marker X-Press It Blending Card, Echo Park – Happy Fall (6″ x 6″), Hammermill – Premium Colour 100 lb., Recollections – White, Recollections – Black

Tools: 3M VHB – 2 sided tape, Kraftin’ Kimmie – Pastel Dots, Xyron Creative Station

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W5, W4, W3, W2, W1, W0, W00

Hat: E87, E84, E81, YG95, YG93, YG91, W5, W3, W1, YR24, Y35, Y08

Shirt: E87, E84, E81

Pants: E55, E53, E51

Shoes: E29, E27, E25, E23

Pumpkin: E08, YR18, YR16, YR14, Y08, YG17, YG13, YG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Have a Wicked Hallowe’en!!


Today I’m sharing a CAS card I made using  Three Witches (KLM Digital Designs) image from the October release. These adorable 3 little witches come with 3 different sentiments. One of them, I have used here. The others are “What’s Up Witches” and “Just Fab-boo-lous”. Have a fantastic Hallowe’en everyone and remember to stay safe.

I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. I used my Brother Scan and Cut to cut around the image and coloured it in with Copic markers.  The sentiment was printed out on orange cardstock. I fussy cut around the sentiment and then ran it through my Xyron Create a Sticker and attached it to some white paper. Then, I fussy cut around it again.

The base card is 6″ x 6″ American Crafts White paper. Using Echo Park – I Love Halloween paper, I cut it to 5-7/8th” x 5-7/8th” to give it a thin white border. I adhered it to the base using some glue so that I could move it into place easier. The coloured image and sentiment were both attached using 3M VHB – 2 sided tape.

Card Recipe:

Stamp and Sentiments: Three Witches (KLM Digital Designs)

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Echo Park – I Love Halloween 6″x6″ Paper, AC Cardstock – White, Orange

Tools: 3M VHB – 2 sided tape, Xyron Create a Sticker

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Hair: E18, E08, YR18, YR15

Hat and Dress: V17, V09, BV29, BV25, BV23, BV08, BV04, BV02, BV01

Hat and Dress – Centre Witch: BV29, BV25, BV23, BV08, BV04, BV02, BV01, YG67, YG63, YG61

Candy Corn: YR16, YR15, YR12, C1, C0, Y19, Y15, Y06, Colorless Blender

Pumpkin: YR18, YR16, YR14, Y08, YG17, YG13, YG01

Broom: E37, E35, E34, YR31, YR24, YR23, Y32, C5, C3, C0

BOO: YR09, YR04

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Jack O’Lantern Gnome!!


Today I’m sharing  Jack ‘0 Lantern Gnome (KLM Digital Designs) image from the October release. This adorable little Gnome comes with 3 different sentiments. One of them, I have used here. The others are “Have A Gourd Time” and “Pumpkin Kisses and Harvest Wishes”.

I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. I used my Brother Scan and Cut to cut around the image and coloured it in with Copic markers.  The sentiment was printed out on orange cardstock. I cut the sentiment and then inked around the edges with Tim Holtz Distress Ink – Carved Pumpkin.

For the domes, I used Bella Blvd – Spooktacular and Recollections – Purple Passions paper. I die cut them using my Cuttlebug and Sizzix – Rounded Tags. For the main background paper, I cut it to 6″ x 6″ to fit the base of my card. I adhered it to the base using double-sided tape. All of the cuts were then inked around the edges with Tim Holtz Distress Inks – Dusty Concord using a sponge dauber.

To assemble the card, double-sided tape was used to attach the purple dome. The pumpkin dome, gnome and sentiment were all attached using 3M VHB – 2 sided tape..

Card Recipe:

Stamp and Sentiments: Jack O’Lantern Gnome (KLM Digital Designs)

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Dusty Concord, Tim Holtz Distress Ink – Carved Pumpkin

Paper: Copic Marker X-Press It Blending Card, Bella Blvd – Spooktacular, PhotoPlay – Gnome for the Holidays – Hallowe’en, Recollections – Purple Passions 8.5″ x 11″

Die Cuts: Sizzix – Rounded Tags

Tools: 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21

Beard: W5, W4, W3, W2, W1, W0, W00

Hat and Shirt: V17, V15, V12, E08, YR18, YR16, YR14, YR08

Pants: C10, C8, C6

Shoes: E29, E27, E25, E23, E21

Pumpkin: E08, YR18, YR16, YR14, Y08, YG17, YG13, YG01, N10, N8, N6

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Happy Thanksgiving!!


Sharing a card I made today using It’s Turkey Day (Kraftin’ Kimmie Stamps)! I just love these adorable characters and especially the turkey!!! Who couldn’t love this little guy. LOL! Today is Thanksgiving Day in Canada! Happy Thanksgiving everyone! Hope you all enjoy a safe and wonderful holiday.

To make this card, I started with a white card base of 5.5″ x 4.25″. I cut Copic Marker X-Press It Blending Card to the same size and then used my MISTI and Memento – Tuxedo Black Ink to stamp all of the images. The images were all coloured in with Copic markers.

The sentiment was first stamped with Kraftin’ Kimmie – Mossy Meadows Ink using my MISTI and then again with VersaMark ink. I added some Ranger – Clear Super Fine Detail embossing powder and heat embossed the powder with Marvy Uchida – Embossing Heat Tool. I added a border to the top and bottom of the card using PhotoPlay – Mad 4 Plaid Fall paper, cut at 5.5″ x .5″ each. I adhered the finished image to the base using double-sided tape. To finish off the card, I added in Kraftin’ Kimmie – Pastel Dots.

Card Recipe:

Stamp and Sentiment: It’s Turkey Day (Kraftin’ Kimmie Stamps)

Inks: Memento – Tuxedo Black, Kraftin’ Kimmie – Mossy Meadows Ink, VersaMark ink

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card, PhotoPlay – Mad 4 Plaid Fall paper 6″ x 6″

Tools: MISTI – Most Incredible Stamping Tool, Kraftin’ Kimmie – Pastel Dots, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E53, E51, E50, R20

Hair: E47, E44, E43

Lady: E08, YR18, YR14, YR12, B04, B02, B00, C9, C7, C5, E87, E84, E81

Man and Hat:E87, E84, E81, E43, E42, E41, E15, C9, C7, C5, Y35, Y19, Y08, G05, G03, G00

Turkey: R59, R29, YR16, YR14, YR12, Y38, Y35, Y32, Y15, R02, R000, E25, E23, E21

Pumpkin: E08, YR18, YR14, YR12, E87, E84, E81

Ground: E29, E25, E23, E21

Hope you like it and have a great week!

Pumpkin Kisses!!


Today I’m sharing  Pumpkin Girl (KLM Digital Designs) image from the October release. This little lady has her pumpkin all picked out for Thanksgiving. Now she can make some pumpkin pies and then carve out the pumpkin for Hallowe’en. Here in Canada, we celebrate our Thanksgiving this weekend. So Happy Thanksgiving to everyone! Hope you have a wonderful holiday!

I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer. I used my Brother Scan and Cut to cut around the image and then fussy cut it in a few places. It was then coloured in with Copic markers. The sentiment was printed out on plain white cardstock and then I fussy cut around it, in order to spread it out. Then I ran it through my Xyron Create a Sticker and attached it to some black cardstock. Then I fussy cut around it again.

The backgrounds were die cut with my Cuttlebug and My Creative Time – Rectangle Frame Dies and My Creative Time – Rectangle Frame Dies Layers. The printed background was then inked around all of the edges with Tim Holtz Distress Ink – Carved Pumpkin.

To assemble the card, I began with a white card base of 5.5″ x 4.25″. The 2 background pieces were adhered to the base using double-sided tape. The image and sentiment were both popped up using 3M VHB – 2 sided tape. Finally, some Kraftin’ Kimmie – Krafty Dots were added as embellishments.

Card Recipe:

Stamp and Sentiment: Pumpkin Girl (KLM Digital Designs)

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, K&Company – Tim Coffey Fall Specialty Paper, Recollections – Black Cardstock

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers

Tools: 3M VHB – 2 sided tape, Cuttlebug, Xyron Create a Sticker, Kraftin’ Kimmie – Krafty Dots

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E47, E44, E43

Jacket: YG97, YG95, G24, C3

Jeans: B26, B24, B21

Sweater and Socks: E57, E55, E53, E51

Shoes: C9, C7, C5, C3

Pumpkin: E08, YR18, YR15, YR12, YG17, YG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Stuffed with Love


It’s Wednesday, and this week, I used Angel Bear Scarecrow – T110 (High Hopes Rubber Stamps) for the main image and Scarecrows Stuffed – H087 (High Hopes Rubber Stamps) for the sentiment. The turkey is hiding behind the angel bear for protection from becoming captured. He doesn’t want to become someone’s Thanksgiving Dinner. The crows are shrugging their shoulders, because they are just not sure what’s going to happen! Let’s hope this little angel bear can protect him. LOL!

To make my card this week, I started out with a simple white card base, sized at 5.5″ x 5.5″. The base background was also cut at 5.5″ x 5.5″ using PhotoPlay – Mad 4 Plaid Fall paper. The added touches at the top and bottom are also from the same paper pad.

The main image was stamped onto Copic Marker X-Press It Blending Card and then die cut with My Creative Time – Rectangle Frame Dies Layers. It was coloured in with Copic Markers and Sakura Glaze – Black pen was used for the eyes and nose. The layer behind the image was die cut from green cardstock using My Creative Time – Rectangle Frame Dies. The sentiment square was die cut using orange cardstock and My Creative Time -Stitched Squares Inside and Out. The image and sentiment were popped up on top of the remaining layers with 3M VHB – 2 sided tape and some Kraftin’ Kimmie Dots were added to finish the card off.

Card Recipe:

Stamp: Angel Bear Scarecrow – T110 (High Hopes Rubber Stamps)

Sentiment: Scarecrows Stuffed – H087 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Paper: Copic Marker X-Press It Blending Card, PhotoPlay – Mad 4 Plaid Fall paper 6″ x 6″, Green Cardstock, Brown Cardstock

Die Cuts: My Creative Time – Rectangle Frame Dies Layers, My Creative Time – Rectangle Frame Dies, My Creative Time -Stitched Squares Inside and Out

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Kraftin Kimmie Dots, Sakura Glaze – Black

Image coloured with Copic Markers:

Bear: E35, E34, E33, E31, E30, R21, R02, R01

Wings: E53, E51, E50

Shirt: YG67, YG61, R37, R24

Pants: B26, B23, B21

Bow Tie, Patch, Hat Brim: R59, R37, R35, R24

Turkey: E35, E34, E33, E31, YR18, YR16, YR12, YR02, R59, R37, R24, Y38, Y18

Pumpkin and Stem: YR18, YR16, YR12

Straw: E34, YR23, Y23, Y21

Crows: C9, C7, C5, Y38, Y18

Flower: Y38, Y35, Y18, YG17, YG13, YG03, YG01

Grass and Greenery for Plants: YG17, YG13, YG03, YG01

Clouds and Sky: B60, B02, B01, B00, B000, C0, Colorless Blender

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

 

A Perfect Autumn Day!


Welcome High Hopes Rubber Stamps Fans!

It’s Wednesday, and this month at High Hopes Rubber Stamps we are celebrating Fall.  This week, I used Pilgrim Pair S209 (High Hopes Rubber Stamps). They’re out on a stroll and getting ready for Thanksgiving! Do you do something special for Thanksgiving?

 

Card Recipe:

Stamp: Pilgrim Pair S209 (High Hopes Rubber Stamps)

Sentiment: Simple Stories – Hello Fall 6″x6″ (15.2×15.2 cm) paper pad

Paper: Copic Marker X-Press It Blending Card, Pebbles – Harvest 6″x6″ (15.2×15.2 cm)

Embellishment: Your Next Embellie – YNS Gumdrops – Sparkly Black YNSDG021

Inks: Memento – Tuxedo Black, Tim Holtz Distress Inks – Peeled Paint, Tim Holtz Distress Ink – Pine Needles, Tim Holtz Distress Inks – Ground Espresso

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, E22, E20

Hair: C5, C3, C1

Skirt, Man’s Top and Man’s Shoes: E29, E27, E25, E23

Apron, Man’s Pants, Ladies Hat: W5, W3, W1

Shoes, Man’s Hat and Belt: W9, W7, W5

Hat Band, Foot Soles: C5, C3, C1

Buckles: E15, Y28, YR24, YR23

Collars: C1, C0, Colorless Blender

Apron. Leaves: YG67, YG63, YG61, YG06

Pumpkin: YR09, YR07, YR04, YR02

Apples, Heart: C5, R29, R27, R24

Basket: Y23, E33, E31

Grass: G28, G21, G07

Sky and Clouds: B02, B01, B00, C1, B60

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.