Tag Archive | Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″

Born to Be Wild!!


Sharing a card that I made today using KLM Digital Design –  Pre-Colored MotorCycle Gnome from the new May 2022 release.  I remember how refreshing it was when I was younger going for rides on a motorcycle during hot weather!

Using Hammermill – Premium Colour 100 lb. cardstock, I created a base card of 5.5″ x 4.25″. I cut a panel to be the same size out of the same cardstock. The mountains were created using Kraftin’ Kimmie – Krafty Scenery 2 and Tim Holtz Distress Ink – Vintage Photo, Picket Fence – Blending Brush and blocking off the base of the mountains with a long Post-It Note. Once the mountains were in place, I created the clouds using Lawn Fawn Cuts – Cloudy Stencil, Tim Holtz Distress Ink – Salty Ocean and a Picket Fence – Blending Brush. I die cut the road using my Anna Griffin Empress Mini Machine, My Favourite Things – Die-Namics – Open Road MFT-1138 out of Recollections – Black paper. I measured it to the line of the mountains and cut it. Using this as a guide, with Tim Holtz Distress Inks – Mowed Lawn and a Picket Fence – Blending Brush, I created the grass.

Using my Anna Griffin Empress Mini Machine and Stampin’ Cut & Emboss – Pine Wood Dies, I die cut all of the trees using Scrapbook.com – Jewels Smooth Cardstock and Lawn Fawn – Watercolor Wishes Rainbow. I coloured the trunks using Copic marker E27. I applied the bottom trees with glue and then popped up the front trees with Scrapbook Adhesives – 3D Foam Strips. I imported the image into Microsoft Word and printed it out onto Copic Marker X-Press It Blending Card. I fussy cut around the image and added 2 layers of U-Line double-sided tape to it and popped it up onto the road to complete the card.

Card Recipe:

Stamp:  Pre-Colored Motorcycle Gnome – KLM Digital Designs

Sentiment: Art Impressions – Born To Ride Set – 5044

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Ink – Rustic Wilderness, Tim Holtz Distress Ink – Vintage Photo

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Scrapbook.com – Jewels Smooth Cardstock (4.25″ x 5.5″), Scrapbook.com – Jewels Smooth Cardstock (4.25″ x 5.5″), Tim Holtz Distress Inks – Mowed Lawn, Recollections – Black, Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″

Dies: Stampin’ Cut & Emboss – Pine Wood Dies, My Favourite Things – Die-Namics – Open Road MFT-1138

Stencil: Lawn Fawn Cuts – Cloudy Stencil, Kraftin’ Kimmie – Krafty Scenery 2

Miscellaneous: U-Line – 2 sided tape, Anna Griffin Empress Mini Machine, Picket Fence – Blending Brushes, Scrapbook Adhesives – 3D Foam Strips

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Better Late Than Never!!


Sharing a birthday card I made today using KLM Digital Design –  Stanley The Snail from the new May 2022 release. This image also comes with 2 more sentiments, “You snailed it!” and “Thanks SLOW much!”  Love this sentiment “Better late than never!” as it could be used for so many different occasions.

Using Hammermill – Premium Colour 100 lb. cardstock, I created a base card of 5.5″ x 4.25″. Using Tim Holtz Distress Ink – Salty Ocean, I created the clouds with Lawn Fawn Cuts – Cloudy Stencil directly on the base card. With the dies from Lawn Fawn – Simple Grassy Hillsides and Lawn Fawn – Watercolor Wishes Rainbow paper, I die cut 3 lawn cuts using my Anna Griffin Empress Mini Machine.

I imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers. Using scissors, I fussy cut around the coloured image and inked around the edges with a black marker. I cut the sentiment with my cutter and added U-Line double sided tape to it and popped it up onto the smallest lawn cut.

The card was now ready to assemble. I added U-Line double-sided tape to each layer of grass. I added a second layer of U-Line double sided tape to the middle layer. I used my fussy cut image to determine where the lawn cuts would be positioned and then popped up each layer onto the base. I applied some glue to the back of the image on the bottom only and adhered it to the card between the 2nd and 3rd layer of grass. I felt like the card still needed something, so I added 3 lady bugs from Forever In Time – Ladybug Gems and a butterfly from Doodlebug Design Inc. – Plum Butterflies Braddies to finish off my card.

Card Recipe:

Stamp and Sentiment:  Stanley the Snail – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″

Die: Lawn Fawn – Simple Grassy Hillsides

Stencil: Lawn Fawn Cuts – Cloudy Stencil

Miscellaneous: U-Line – 2 sided tape, Anna Griffin Empress Mini Machine, Doodlebug Design Inc. – Plum Butterflies Braddies, Forever In Time – Ladybug Gems

Image coloured with Copic Markers:

Snail: E84, E81, E44, E43, E42, E41, E39, E37, E35, E34, E33, E31, E30, E29, E27, E25, E23, E21, Y38

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Birthday Hi!!


It’s Wednesday, and this week, I made a card using High Hopes Rubber Stamps Just Cruisin’ – SLF022 for the image and Just Motorin’ By – G309 for the sentiment. The gnomes are out again and this time their motoring by with a birthday “Hi!” for you.

To make my card this week, I began with a card base of Hammermill – Premium Colour 100 lb. cut and scored to be 5.5″ x 4.25″. To create my background sky, I cut the Echo Parks Paper Co. – Birthday Wishes cardstock to the size of 5.5″ x 1.75″. With Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″, I made 3 cuts. 5.5″ x .75″, 5.5″ x 1.25″ and with my Cuttlebug and Card Deco Essentials – Slimline Landscape Borders die, the tree landscape. I ran all of the pieces through my Xyron Creative Station and Xyron Create a Sticker. Using my Cuttlebug again and Recollections – Black cardstock, I die cut the road using My Favourite Things – Die-Namics – Open Road die.

The image and sentiment were both stamped onto Copic Marker X-Press It Blending Card and the image was coloured in with Copic Markers. I fussy cut around the image and the sentiment and then added U-Line double-sided tape to pop them up onto the card later.

The card was now ready for assembly, starting at the bottom of the card, I applied the first piece of grass. I measured the distance of the road and then applied the second piece of green slightly lower than where the road would end. The sky piece was added next and then the tree scape. I used my E25 marker to make the tree trunks brown. I applied double-sided tape to the road piece and adhered it to the base. I popped up the image and the sentiment onto the background. Tim Holtz Distress Ink – Tumbled Glass and a dauber were used to ink around the edges of the sky to complete the card.

Card Recipe:

Stamps: Just Cruisin’ – SLF022 (High Hopes Rubber Stamps)

Sentiment: Just Motorin’ By – G309 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″, Echo Parks Paper Co. – Birthday Wishes by Alisha Gordon – 6″ x 6″ Paper Pads, Recollections – Black cardstock

Die Cuts: My Favourite Things – Die-Namics – Open Road MFT-1138, Card Deco Essentials – Slimline Landscape Borders

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, Xyron Create a Sticker and Xyron Creative Station

Image coloured with Copic Markers:

Gnomes: E47, E44, E43, E41, E15, E08, E21, E11, E00, E000, YR18, YR14, BG72, BG57, BG49, BG45, BG32, BG11, BG09, BG05, BG02, BG01, Y02, Y00

Car: R59, R39, R37, R35, C9, C7, C5, C4, C3, C2, C1, B000

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Ellie & Friends!!


It’s Wednesday, and this week, I made an Easter card using High Hopes Rubber Stamps Ellie & Friends – TDG025 for the image and Happy Easter! – F096 for the sentiment. We are celebrating our new “Spring Fever Release” this month and who couldn’t love this adorable image!

To make my card this week, I began with a card base of AC Cardstock – White, cut and scored to be 6″ x 6″. I cut the flower cardstock from Echo Park – Welcome Easter at 6″ x 1.75″ and Lawn Fawn – Watercolor Wishes Rainbow paper to 6″ x 4.5″. I applied double-side tape and adhered both pieces directly to the base. Tim Holtz Distress Ink – Wilted Violet ink was used to ink around all of the edges of the base card. Using My Creative Time -Stitched Squares Inside and Out and my Cuttlebug, I die cut Momenta – Cardstock and inked around the edges with Tim Holtz Distress Ink – Fossilized Amber. 3M double-sided tape was applied to the back of this and it was popped up onto the base card.

Using PinkFresh Studios – Essentials: Blanket Stitched Square Die Set and my Cuttlebug, I die cut Copic Marker X-Press It Blending Card. I stamped the main image onto this die cut and sentiment onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black. The image was coloured in with Copic Markers and then U-Line double-side tape was applied to the back of it. This was popped up over top of the yellow square.

I fussy cut around the sentiment and inked around the edges with Tim Holtz Distress Ink – Wilted Violet. I ran it through my Xyron Create a Sticker and applied it to the Momenta – Cardstock and fussy cut around it again. I applied Scrapbook Adhesives – 3D Foam Strips to the back of the sentiment layers and added it to the bottom right of the card. Lastly, I added in 3 DoodleBug Design Inc. – Sprinkles Spring Assortment to complete the card.

Card Recipe:

Stamps: Ellie & Friends – TDG025 (High Hopes Rubber Stamps)

Sentiment: Happy Easter! – F096 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Wilted Violet, Tim Holtz Distress Ink – Fossilized Amber

Paper: Copic Marker X-Press It Blending Card, Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″, Echo Park – Welcome Easter (6″ x 6″), Momenta – Cardstock, AC Cardstock – White

Die Cuts: My Creative Time -Stitched Squares Inside and Out, PinkFresh Studios – Essentials: Blanket Stitched Square Die Set

Tools: MISTI – Most Incredible Stamping Tool, U-Line double-sided tape, 3M double-sided tape, Cuttlebug, Xyron Create a Sticker, DoodleBug Design Inc. – Sprinkles Spring Assortment, Scrapbook Adhesives – 3D Foam Strips

Image coloured with Copic Markers:

Elephant: C5, C3, C2, C1, R30, R20

Chicks: E53, E50, E15, YR31, YR18, YR14, Y21, Y08, Y14, Y08

Flowers, Stems and Leaves: V09, V06, V04, V01, Y17, Y13, G85, G43

Eggs: Y17, Y13, Y04. BG15, BG13, BG11, BG10, V17, V15, V12, B04, B02, B01, RV66, RV55, RV13, RV11, RV10

Sky: B60, B02, B01, B00, B000, C1, Colorless Blender

Grass: G14, YG23, YG11, YG03, YG01

Hope you like it and have a fantastic week!

Check out more adorable images in the new “Spring Fever Release” at High Hopes Rubber Stamps!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Woodland Gnome!!


Sharing a card I made today using KLM Digital Designs – Woodland Gnome Girl from the new August release. This little gnome is keeping calm even with little bees flying around. I know if it was me, I’d be running for cover. LOL!

 

This image also comes with 2 other sentiments, “You gno-me too well” and “Just because”.

To make the card, I first imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. Using by Brother Scan and Cut, I cut around the image leaving a small white border. The image was coloured in with Copic markers. For the base card, I used Hammermill – Premium Colour 100 lb. and cut it to be 5.5″ x 4.25″. PhotoPlay – Gnome for the Holidays Thanksgiving paper was cut to the same size as the base and attached using double-sided tape. Lawn Fawn – Watercolor Wishes Rainbow paper was cut to the size of 5.5″ x 2.5″ and glued onto the sunflower paper in the centre. The image was popped up and placed onto the centre of the yellow background paper. Using my Cuttlebug, die cut from Lawn Fawn – Simple Grassy Hillsides and Lawn Fawn – Watercolor Wishes Rainbow paper, I cut the grass. I fussy cut around the printed sentiment and used Copic YGO1 to fill in the background and to go around the fussy cut. I ran this piece through my Xyron Create a Sticker because I wanted the sentiment to lay nice and flat on the grass background. The grass was then centred and popped up on the card. All of the background layers were inked with Tim Holtz Distress Ink – Rustic Wilderness before placing them onto the card. Lastly, to complete the card I added in a few bees from Sprinkletz Embellishments – Bubble Bees.

Card Recipe:

Stamp and sentiment: Woodland Gnome Girl – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Rustic Wilderness

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., PhotoPlay – Gnome for the Holidays Thanksgiving, Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″

Die Cut: Lawn Fawn – Simple Grassy Hillsides

Miscellaneous: Xyron Create a Sticker, Cuttlebug, Sprinkletz Embellishments – Bumble Bees (NK137), Brother Scan and Cut

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000

Hair: E47, E45, E43, E42, E41

Dress and Hat: E08, YR18, YR14, YR12

Shoes: E39, E37, E35, E34, E33, E31, E30

Sunflower: YG67, YG23, YG17, Y17, Y15, Y02, E47, E37, E35, E31

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Frightfully Delightful!!!


It’s Wednesday, and this week, I made a card using Frankie – TT021 by High Hopes Rubber Stamps for the main image and Frightfully Delightful – FF054 (High Hopes Rubber Stamps) for the sentiment. Frankie is all set for Hallowe’en this year with his little pumpkin full of candy. We used to use a pillow case when we were younger to get a lot more goodies when we went Trick or Treating. LOL!

To make my card this week, I began with stamping the image and sentiment onto Copic Marker X-Press It Blending Card using my MISTI and Memento – Tuxedo Black ink. Using my Brother Scan and Cut, I cut around the image leaving a small white border. I coloured in the image and then used Copic C0 to go around all of the edges. I fussy cut around the sentiment and applied Copic Y17 around the edges. I put this through my Xyron Create a Sticker and then applied it to some scrap yellow cardstock. Once again, I fussy cut around the sentiment.

Using my Cricut Explore, I die cut the Haunted House from the Holiday Cakes Cricut Cartridge and the Haunted Tree from the October 31 Cricut Cartridge. I decided to cut the second layer of the haunted house out of Copic Marker X-Press It Blending Card rather than solid cardstock. This gave me the chance to colour in the windows, doors, shutters and moon the way I wanted to in order to make it more spooky with Copic Markers. The moon was coloured in with a mixture of Tim Holtz Distress Ink – Hickory Smoke, Tim Holtz Distress Ink – Fossilized Amber and Picket Fence Studio Blender Brushes. Using glue, I pieced everything together for the Haunted house.

My card was now ready to assemble. I started with a 6″ x 6″ base card made from AC Cardstock – White. I cut the bats background to the same size from Echo Park – I Love Halloween paper pack. I applied this directly to the base with double-sided tape. Using Tim Holtz Distress Ink – Hickory Smoke and a Picket Fence Studio Blender Brush I inked around all of the edges and across the top of the card to darken the sky a little bit. Next, I die cut the grass using my Cuttlebug, Lawn Fawn – Watercolor Wishes Rainbow paper and Lawn Fawn – Simple Stitched Hillside Borders. I applied this directly to the bottom of the card using liquid glue. I applied glue to the haunted tree and haunted house and then applied both of them directly to background. Frankie and the sentiment were both popped up on the card using 3M VHB – 2 sided tape.

Card Recipe:

Stamp: Frankie – TT021 (High Hopes Rubber Stamps)

Sentiment: Frightfully Delightful – FF054 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Hickory Smoke, Tim Holtz Distress Ink – Fossilized Amber

Paper: Copic Marker X-Press It Blending Card, AC Cardstock – White, Echo Park – I Love Halloween, Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″

Die Cut:Lawn Fawn – Simple Stitched Hillside Borders – Lawn Cut

Cricut Die Cuts: – October 31 – Haunted Tree (#M3DCC2), Holiday Cakes – Haunted House – (#M40A62)

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen, Brother Scan and Cut, Xyron Create a Sticker and Picket Fence Studio Blender Brushes, Cricut Explore

Image coloured with Copic Markers:

Skin: BV23, BV20, G00, BG93, BG90, R29, R24 (Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen)

Hair: 100, B39, B32, C9, C7, C5, C3, PrismaColor Premier – Black

Jacket and Pants: V99, V95, V93, V91

Shirt: C9, C7, C5

Shoes: 100, C10, C9, C7, C5, C3

Bat: BV29, BV25, BV23 (Eyes: Sakura Glaze – Black Pen, Gelly Roll Sakura #5 Pen)

Pumpkin: E08, YR18, YR16, YR12, Y15, Y08, C10

Candy: V09, V06, V04, YG17, YG13, YG11

House Background: V17, V15, V09, V06, V04, Y17, Y08, Y04, C3, C2, BV20

Shadow below Frankie: YG17, YG13

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Happy Xmas Couple!!!


It’s Wednesday, and this week, I made a card using Happy Together – TT007 by High Hopes Rubber Stamps for the main image and Holiday All Year – H200 (High Hopes Rubber Stamps) for the sentiment. This month High Hopes Rubber Stamps is celebrating Christmas in July! Have you started your Christmas cards yet for this year?

To make my card this week, I began with a card base made from AC White Cardstock cut and scored to be 6″ x 6″. I inked around the edges of American Crafts – “Holiday” paper cut to the same size with Sharpie – Gold Medium Point – Water Based Paint. Then I applied it directly to the base card with double-sided tape. The larger oval was die cut using my Cuttlebug, Forever In Time – Texture Rouge paper and Gina Marie Designs – Big and Little Pierced Chain Oval Layered Dies. Using VersaMark ink, I inked around all of the edges of the oval and then applied Stampendous Stamp-n Stuff – Gold Tinsel and heat embossed it with Marvy Uchida – Embossing Heat Tool. This was then applied directly to the base card using Forever In Time – Double-sided foam tape. I die cut the Copic Marker X-Press It Blending Card paper using oval dies from the same set and Whimsy Stamps – Bookmark and Tags Die Set was used to die cut Lawn Fawn – Watercolor Wishes Rainbow paper.

The image was stamped using my MISTI and Memento – Tuxedo Black ink onto the smaller oval. I coloured in the image with Copic markers. The sentiment is actually 2 lines, but I wanted it to fit inside the gift die, so I used Scotch tape to mask off the words I didn’t want to show each time. I used my MISTI to do the stamping and Versa Fine – Onyx Black and Ranger – Clear Super Fine Detail embossing powder to emboss it. I used my Marvy Uchida – Embossing Heat Tool to emboss the powder. I cleaned off the stamp and then repositioned it again, repeating the previous steps. I did this 4 times. To finish off the sentiment give box, I applied some VersaMark ink to the bow and around all of the edges of the die cut. Next, I added Stampendous Stamp-n Stuff – Gold Tinsel embossing powder and heat embossed everything using my heating tool.

To assemble the card, I added 3M VHB – 2 sided tape to the back of the coloured image and Forever In Time – Double-sided foam tape to the back of the sentiment and applied them both to the card. To finish everything off and give it a little bit of sparkle, I added some dots on the holly using Stickles – Xmas Red.

Card Recipe:

Stamp: Happy Together – TT007 (High Hopes Rubber Stamps)

Sentiment: Holiday All Year – H200 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, VersaMark, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card,  Forever In Time – Texture Rouge, American Crafts – “Holiday” – 6″ x 6″ paper pad, Lawn Fawn – Watercolor Wishes Rainbow – 6″ x 6″

Die Cuts: Gina Marie Designs – Big and Little Pierced Chain Oval Layered Dies, Whimsy Stamps – Bookmark and Tags Die Set

Embossing Powder: Stampendous Stamp-n Stuff – Gold Tinsel, Ranger – Clear Super Fine Detail

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Sharpie – Gold Medium Point – Water Based Paint, Forever In Time – Double-sided foam tape, Stickles – Xmas Red

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20

Hair: E47, E44, E43, E40, E15, Y38, Y21, YR23, E29, E25, E23, E21

Dress and Ribbon: R39, R37, R35, C1

Vest, Holly, Flower Wrap: G46, G28, G24

Pants: C9, C7, C5

Shoes: 100, C7, C5, C3

Flowers: R39, R37, R35, R24, C1

Background: G02, G00, G000, G0000

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.