Tag Archive | Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

So Mushroom In My Heart!!


Sharing a card I made today using these adorable images from Sweet Sentiment- Internet Troll. He’s in the mood for love, are you?

For the base card, I used AC Cardstock – White and cut it and scored it to be 6″ x 6″. I die cut Craft Consortium – It’s Snome Time paper and Recollections – Red cardstock using my Couture Creations – Go Power and Emboss and Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B. The grass was cut with the same cutting machine, green cardstock and Lawn Fawn – Simple Grassy Hillsides die cut. I ran the grass through the die cut machine again using the same size square that I had used for the smaller mushroom background. Tim Holtz Distress Ink – Pine Needles was applied around the edges of the smaller mushroom square. Using double-sided tape, I applied the larger mushroom background directly to the base card. The lawn was layered and applied to the small mushroom square. The red square and smaller mushroom square were both applied to ivory cardstock using double-sided tape. Using my cutter, I cut around the edges leaving a small border. The red and ivory square were then applied directly to the base background using double-sided tape. The mushroom square, grass, ivory square combo were popped up onto the red square using 3M double-sided tape.

Copic Marker X-Press It Blending Card was used for the images and sentiment. The images were coloured in with Copic markers. I fussy cut around all of the images and sentiment and inked around the sentiment with Tim Holtz Distress Ink – Pine Needles. Using glue, I adhered the images to the mushroom background and in between the grass. The sentiment was popped up using 3M double-sided tape onto the card to finish it off.

Card Recipe:

Stamps and sentiment: Internet Troll – Sweet Sentiments

Inks: Tim Holtz Distress Ink – Pine Needles

Paper: Copic Marker X-Press It Blending Card, Craft Consortium – It’s Snome Time (6″ x 6″), Recollections – Red, Ivory cardstock, AC Cardstock – White

Die Cuts: Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B, Lawn Fawn – Simple Grassy Hillsides

Miscellaneous: Couture Creations – Go Power and Emboss, 3M double-sided tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R20, R01, R00, R000

Eyes: YG67, YG63, YG61,

Hair: C5, C3, C1

Clothing: B26, B23, B21, E43, E42, E41

Hat and Patch: BG72, BG57, BG32, BG11

Walking Stick: E49, E37, E35, E34

Mushrooms: E42, E40, E09, E08, E0000, BV31, R08

Hope you like it and have a great week!

Come and check us out on Passionate Paper Creations & Friends FB group
as we are currently sponsoring Sweet Sentiment until Saturday, October 16, 2021.

If you are a member of Passionate Paper Creations & Friends FB group
you can go to the top of the page and get a shopping discount.

If you are not a member just click join. We are a fun loving group with a lot of inspiration.

Good Things To Come!!


Sharing a card I made today using KLM Digital Designs – Jumping Gnome for the main image and Thumbs Up Gnome for the sentiment from the new September release.

To make the card, I first imported the image and sentiment into Microsoft Word and printed them out onto Copic Marker X-Press It Blending Card. I die-cut the image using Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B. The image was coloured in with Copic markers. I printed out the black and white image again onto regular photocopy paper and used by Brother Scan and Cut to die cut the image to use as a mask. I created the grass background and then attached the mask to the coloured image. A combination of Avery Elle – Pierced Clouds Die (D-05-01) which I created stencils from and Tim Holtz Distress Ink – Salty Ocean and Tim Holtz Distress Inks – Tumbled Glass were used to create the clouds in the sky. I accidentally used too much ink for the one cloud, so I decided to cover it up by creating a few trees in the background.

For the base card, I used Hammermill – Premium Colour 100 lb. cardstock and cut it and scored it to be 5.5″ x 5.5″.  Using double-sided tape, I attached the coloured image to some black cardstock and then used my trimmer to create a small border. I then added double-sided tape to the back of the black cardstock and adhered it directly to the base to finish off my card.

Card Recipe:

Stamp and sentiment: Jumping Gnome – KLM Digital Designs, Thumbs Up Gnome – KLM Digital Designs

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Tumbled Glass

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Black Cardstock

Die Cuts: Avery Elle – Pierced Clouds Die (D-05-01), Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Miscellaneous: Brother Scan and Cut

Image coloured with Copic Markers:

Skin and Mouth: E21, E11, E00, E000, R26, R24

Beard: E47, E45, E43

Jeans and Hat: B26, B23, B21

Shirt: E89, E87, E84

Shoes: E27, E25, E23

Grass: YG17, YG13, YG03, YG01

Trees: YG67, YG63, R25

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Fairy Garden!!


It’s Wednesday, and this week, I’m sharing a card I made from the High Hopes Rubber Stamps “Mix It Up Release”  using Fairy Garden – TT141 for the main image and Leave Room – LL015 for the sentiment! I love movies and reading books about Fantasy! It’s always so much fun to get lost in the moment, just like these little fairies are enjoying their little magical garden!

To make my card this week, I started out with a base card using AC Cardstock – White at the size of 6″ x 6″. I thought this paper by Graphic45 – Unique Papercrafting – Fairie Dust Collection – Moonlit Blooms went so well with the sentiment and the garden, so I die-cut it using my Couture Creations – Go Power and Emboss and Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B. I used double-sided tape and attached it directly to the base.

The image and sentiment were both stamped using my MISTI and Memento – Tuxedo Black ink. I coloured in the image with Copic markers and then fussy cut around it and the sentiment. I ran both pieces through my Xyron Creative Station to make them into stickers and so that they would lie completely flat when I attached them to some pieces of Recollections – Black cardstock. Once again, I fussy cut around the coloured image and sentiment. 3M VHB – 2 sided tape was attached to the backs of the image and sentiment and were applied directly to the background of the card to finish it off.

Card Recipe:

Stamp: Fairy Garden – TT141 (High Hopes Rubber Stamps)

Sentiment: Leave Room – LL015 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black

Die Cuts: Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Paper: Copic Marker X-Press It Blending Card, Graphic45 – Unique Papercrafting – Fairie Dust Collection – Moonlit Blooms, AC Cardstock – White, Recollections – Black cardstock

Tools: MISTI – Most Incredible Stamping Tool, 3M VHB – 2 sided tape, Couture Creations – Go Power and Emboss, Xyron Creative Station

Image coloured with Copic Markers:

Tree House: E49, E27, E25, E23, E21, W5, W3, W0, BG72, BG57, BG32, BG11, BG01, Y04, Y02, C5, C3, C1

Walkway: E47, E44, E43, E42, E40

Greenery: YG67, YG63, YG17, YG13, YG11, YG03, YG01, G17, G14, G07

Flowers: V12, V09, V06, V01, YR30, YR20, YR16, YR14, E15, Y17, Y08, Y06, GB02, BG01, BG0000

Bench and Bridge: BG72, BG57, BG32, BG11, C5, C3, C1, E27, E23, E21

Bird Bath: C5, C3, C1,

Water: B93, B91, B52, B41, B06, B04, B02, B01, B000

Check out some other fun new returning stamps from the Mix It Up Release here:
Mix It Up Release – High Hopes Rubber Stamps (highhopesstamps.com)

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the High Hopes blog, and the High Hopes Rubber Stamps Facebook Fan page plus you can also follow us on
Instagram, Twitter and Pinterest.

Over The Hill Dinosaur!!


Sharing the first image and sentiment from KLM Digital Designs today from the new February release called Dinosaur Collection. Love this collection and the images are great for masculine cards too! Over the next few days, more images and sentiments from this set will be posted. Watch for them! LOL!

To make the card, I printed out the main image onto Copic Marker X-Press It Blending Card using my HP Printer and coloured it in with Copic markers. Microsoft Word was used to import the shape and line weight of 3 was used for the thickness. I imported the sentiment and sized it to fit inside the shape. This was printed out on Recollections – White cardstock and then I used my cutter to keep the lines straight.

To add some dimension to the card, I die cut some small clouds using Nellie’s Choice – Nature Scene Dies – NSD002 – Sky using Hammermill – Premium Colour 100 lb. paper. Copic markers were used to add some colour to them. My Creative Time – Stitched Squares Inside and Out die was used to cut out the main image and Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B were used to die cut the larger square using Recollections – Black cardstock.

To assemble the card, the 2 squares were attached using double-sided tape. The clouds and sentiment were popped up using 3M VHB – 2 sided tape. Larger cloud was attached with Tombow glue.

Card Recipe:

Stamp and Sentiments: Dinosaur Collection (KLM Digital Designs)

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Recollections – White, Recollections – Black

Die Cut: Nellie’s Choice – Nature Scene Dies – NSD002 – Sky, Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Tools: 3M VHB – 2 sided tape, Cuttlebug

Image coloured with Copic Markers:

Dinosaur: E89, E87, E84, E81

Mountain: E89, E59, E53, E49, E35, E33, E27, E23, Colorless Blender

Sky: R32, R11, R00, B91, B01, B00, B000, BG70,

Clouds: B60, C1, C0, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Define Naughty!


Hi Everyone! I’m participating in the 2020 Cat Lovers Blog Hop (#2020CatLoversHop) this year.

This is my third year joining the fun event. For six years, Her Peaceful Garden has been sponsoring The Cat Lover’s Blog Hop and it is a lot of fun.

This year, I created a Christmas card using  Callie Christmas Kitty – R096 (High Hopes Rubber Stamps) for the main image and Define Naughty – FLL004 (High Hopes Rubber Stamps) for the sentiment. I just love this adorable stamp and it reminds me so much of how my cats used to love playing with the Christmas tree ornaments every year. We definitely learned our lesson after the first time, 2 of our little babes as kittens decided it would be fun to take down the entire tree. After that happened, all ornaments put on the tree were unbreakable and cat friendly. LOL!

To make my card, I started with a base of 6″ x 6″. I cut some Recollections – Cranberry cardstock to the same size and attached it directly to the base. For the main background, I used my Cuttlebug and Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B to die cut Recollections – Christmas Pets paper. I inked around all of the edges with Tim Holtz Distress Ink – Weathered Wood and applied it to the base using 2-sided tape.

For smaller background Recollections – Cranberry cardstock was used and Copic Marker X-Press It Blending Card paper for the main image. I used My Creative Time – Rectangle Frame Dies and My Creative Time – Rectangle Frame Layers die cuts. Copic Markers were used for the main image. Once the image was coloured, I stamped the sentiment using Versa Fine – Onyx Black and applied Ranger – Clear Super Fine Detail embossing powder which I heat set with Marvy Uchida – Embossing Heat Tool.

To complete the card, I attached the main image to the red backing with 2-sided tape. Then I popped up the small background with 3M VHB – 2 sided tape. I applied Diamond Stickles all around the frame of the image and added a little green bow and some pop-dots to finish off the card.

Card Recipe:

Stamp:  Callie Christmas Kitty – R096 (High Hopes Rubber Stamps)

Sentiment Background: Define Naughty – FLL004 (High Hopes Rubber Stamps)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Weathered Wood, Versa Fine – Onyx Black

Paper: Copic Marker X-Press It Blending Card, Recollections – Christmas Pets, Recollections – Cranberry cardstock

Die Cuts: My Creative Time – Rectangle Frame Dies, My Creative Time – Rectangle Frame Layers, Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape, Diamond Stickles, Marvy Uchida – Embossing Heat Tool

Images coloured with Copic Markers:

Kitten: C7, C5, C4, C3, RV02, Sakura Glaze – Black

Tree Branches: G29, G28, YG95,

Bobbles: B06, B05, B02, RV19, RV17, RV02, RV000, Gelly Roll Stardust – Clear

Candy Canes: R59, R39, R37, R35, C1, C0, Colorless Blender

Background: BG72

Hope you like it and have a fantastic week!

 

Birthday Message For You!


Welcome Back Dreamerland Craft Fans!

Today, I’m sharing a birthday card that I made using a combination of Dreamerland Crafts stamps.  A Special Message For You – D16001 was used for the boy image and sentiment, Mailbox & Wall – Mix & Match Collection – M18301 and  Window & Gate – Mix & Match Collection – M18302 were used to create the background. I just love how these stamps came together to help me to create this scene.

 

To make this card I used a base card of 6″ x 6″. I die cut X-Press It Blending Card using my Cuttlebug and dies from Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B. I used the square die that was about 5.75″ x 5.75″.

Next, I created a mask of each of the stamps I was going to use to create the scene. The boy was stamped first and then I placed the mask over top of him. Next was the gate, then the brick wall and the foliage.  I added the masks after stamping each piece. Lastly, I stamped the 2 windows. All masking was removed at this point.

To create the main building brick wall, I used Kraftin’ Kimmie Stencil – Brick Wall. Using my magentic mat, small magnets were used to hold the stencil down over the image. Then Copic markers were used to create the texture of the brick. Once all of the brick was done, C4 and C2 were used to fill in the spaces in between. I drew in the sidewalk using a combination of C0 – C5 markers.

After all of the main colouring was done, Tim Holtz Distress Ink – Blueprint Sketch was used to stamp the sentiment. Then, because I was using my MISTI, it was easy to then re-ink the sentiment with Versamark ink and then emboss it with Ranger – Clear Super Fine Detail embossing powder. Marvy Uchida – Embossing Heat Tool was used to heat up the embossing powder.

Card Recipe:

Stamps:  A Special Message For You – D16001 (Dreamerland Crafts), Mailbox & Wall – Mix & Match Collection – M18301 (Dreamerland Crafts), Window & Gate – Mix & Match Collection – M18302 (Dreamerland Crafts)

Sentiment: A Special Message For You – D16001 (Dreamerland Crafts)

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Blueprint Sketch, Versamark

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Paper: Copic Marker X-Press It Blending Card

Die Cuts: Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Stencil: Kraftin’ Kimmie – Brick Wall Stencil

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, Marvy Uchida – Embossing Heat Tool

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair:  E47, E44, E43

Shirt: YG97, YG95, G21

Pants: B26, B23, B21

Boot: E29, E27, E25, E23, E21

Main Building Brick Wall: E37, E35, E08, E04, C4, C2, Kraftin’ Kimmie – Brick Wall Stencil

Lower Brick Wall: E53, E51, E44, E43, E34, E31, E30, BV23, BV20

Gate: E39, E37, E34, E31

Foliage and Flowers: YG17, YG13, YG03, YG01, G07, V17, V15

Window and Ledgings: E44, E43, E31, E30, E27, E25, E23, E21, E42, E41, E40

Sidewalk: C4, C3, C2, C1, C0

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts and Pointer Scrapbooking on the Facebook Fan pages from the rest of our design team.

Dressing up the Christmas Tree


Welcome Back Dreamerland Craft Fans!

Dreamerland has just released some brand new stamps for the 2019 October Christmas Release and today, I’m sharing It’s time to dress up the Christmas tree  (Dreamerland Crafts Clear Stamps)!  The little kitty reminds me so much of when mine were small. We had to put all kitten safe decorations on the tree because they always like to play with them.

 

Card Recipe:

Stamp: It’s time to dress up the Christmas tree (Dreamerland Crafts Clear Stamps)

Sentiments: It’s time to dress up the Christmas tree (Dreamerland Crafts Clear Stamps)

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Aged Mahagony

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail.

Paper: Copic Marker X-Press It Blending Card, Hot Buy Craft Smart – Holiday Glitz Glitter Paper 12″ x 12″, Photoplay Christmas Memories – 6″ x 6″

Die Cuts: Festive Collection – Star WreathCreative Expressions by Sue Wilson – CED3138, Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Tools: MISTI – Most Incredible Stamping Tool, Cuttlebug, 3M VHB – 2 sided tape

Image coloured with Copic Markers:

Skin: E000, E00, E04, E11, E21, R22, R20

Hair: E47, E44, E43

PJ’s: B26, B23, B21

Tree: G99, YG67, YG17, G21

Tree Trunk: E18, E35, E33, E31

Tree Stand: C3, C2, C1

Hat and Stocking: R59, R37, R35, Liquid Applique for pompom, StarDust Stickles

Stool: E57, E55, E53

Christmas Balls: E15, YR24, Y35, Y08, B18, B16, B14

Cat: W9, W7, W5

Floor: E18, E15, E13, E11

Mullions: W3, W1

Sky: B99, B97, B95, B91, C1, White Prismacolor pencil for snow

Wall: BG78, BG75, BG18

Background: B04, B02, B00

 

Hope you like it and have a great week!

You can find more cards to inspire you at Dreamerland Crafts on the Facebook Fan page from the rest of our design team.

Also entered into the 2019 Cat Lovers Hop.

Happy Birthday Handsome!


Hi There,

Sharing a birthday card that I made for my wonderful husband who celebrated his birthday this week. I used Sassy Sophie (Kraftin Kimmie) for the main image and sentiment.

To create the background I used a mixture of Tim Holtz Distress inks. The car is from Creative Stamping – Issue 54 – Stamp set. My husband loved his card and I hope you do too!

Card Recipe:

Stamps: Sassy Sophie (Kraftin Kimmie) – Anne Rodrique retired stamp, Life’s an Adventure – Practical Publishing International Ltd.

Paper: Copic Marker X-Press It Blending Card, Dark blue cardstock

Inks: Memento – Paris Dusk, Memento – Tuxedo Black, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Ink – Hickory Smoke, Tim Holtz Distress Ink – Mowed Lawn, Tim Holtz Distress Ink – Pumice Stone, Tim Holtz Distress Ink – Salty Ocean, Tim Holtz Distress Inks – Peeled Paint, Versa Fine – Onyx Black

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Die Cuts: My Favourite Things – Die-Namics – Open Road MFT-1138, Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Miscellaneous: MISTI – Most Incredible Stamping Tool, Cuttlebug

Copic Markers were used to colour images.

Skin: E000, E00, E04, E21, E11, R22, R20

Hair: E47, E44, E43

Eyes: BG10, G85, G24, G21, W7, C1, R00

Jeans:  B21, B06, B04, B02

Top and Kircheif: BG13, BG11, BG10, Gelly Roll Sakura #8 Pen

Pump: G21, C9, C7, C5, C3, C2, C1, YG67, YG17, YG03

Gas Can: Y17, Y13, Y06, W7, R39, R29, R27, R24, R17

Pop Bottle: E29, E19, YG03

Car: B26, B24, B23, Black, C7, C5, C3, C1

 

It’s Pasture Birthday!


Welcome One Crazy Stamper Fans!

It’s Wednesday, and I’m back to share a card that I made using Farmer Clem (High Hopes Rubber Stamps) on the front of the card and Charlie Party Cow (High Hopes Rubber Stamps) on the inside. A friend asked me to create her a belated birthday card for her farmer friend and I thought this made the perfect combination to do it.

I coloured in Farmer Clem (High Hopes Rubber Stamps) and then fussy cut around him and popped him up on the front of the card. All of the sentiments were created in Microsoft Word and then printed out on my printer. Details are below.

 

For the inside of my card, I stamped the Charlie Party Cow (High Hopes Rubber Stamps) twice and then fussy cut around both of the cows to make it look like they had a party going on. I popped up the one cow image to give the scene a little bit of depth.

Card Recipe:

Stamps: Farmer Clem (High Hopes Rubber Stamps),  Charlie Party Cow (High Hopes Rubber Stamps)

Paper: Doodle Bug Designs Inc. – Down on the Farm – 6″ x 6″ paper pad, Momenta – Cardstock, Copic Marker X-Press It Blending Card, Blue Cardstock

Die Cuts: My Creative Time – Bunch of Fun Circle Dies, Creative Expression Craft Dies by Sue Wilson – Noble Dies – Double Pierced Squares – Set B

Inks: Tim Holtz Distress Ink – Barn Door, Tim Holtz Distress Ink – Blueprint Sketch, Tim Holtz Distress Inks – Peeled Paint, Memento – Tuxedo Black

Miscellaneous: Cuttlebug, MISTI – Most Incredible Stamping Tool

Skin: E000, E00, E21, E04, E11, R22, R20

Hair, Eyebrows and Mustache: C5, C3, C0

Overalls: B37, B24, B23, E15, Y38, Y34, Y17

Shirt: R17, R24, R39, R27, R29, G07, YG17

Scarf: R29, R27, R24, R17, R14

Hat: E15, Y38, Y35, Y17, R229, R27, R24, R17

Boots: E42, E33, E25, E79, E77, E74

Pitchfork: C5, C3, C1, E79, E77, E15

Cows: C10, C8, C6, C3, C1, C0, Colourless Blender, R02, R01, R20, R32, R30, E43, E42, E41

Hat, Confetti: R17, R14, G17, G14, V06, V05, B24, Y19

Balloons:

Yellow: Y09, Y06, Y04, Y02, Y00

Purple: V06, V05, V04, V02, V000

Green: G17, G14, YG41, G00

Background – Spectrum Noir TB3

Sentiments: Microsoft Word – Font Cooper Black, Point Size 20 and 28

Hope you like it and have a fantastic week!

You can find lots of inspiration from the Design Team Divas at the One Crazy Stamper blog, and the One Crazy Stamper Facebook Fan page plus you can also follow us on Instagram, Twitter and Pinterest.

Happy Birthday Bear


Hi There Everyone!

Today I’m sharing a card that I made using the stamps and sentiments from YNS Honey Bear (Your Next Stamp)! I thought this little bear was super adorable and would make a great card for one my friends that loves honey!!!

 

For the honeycomb corner, I used some watercolour paper and a mixture of Tim Holtz inks. Then I used the Honeycomb Corner die cut to cut it out and again went over that area with a mixture of inks to create the honey colour effect.

Card Recipe:

Stamp and Sentiment:  YNS Honey Bear

Die Cuts:  Memory Box – Honeycomb Corner; Creative Expression Craft Dies by Sue Wilson – Double Pierced Squares

Inks: Memento – Tuxedo Black, Tim Holtz Distress Ink – Fossilized Amber, Tim Holtz Ranger Distress Oxide – Fossilized Amber, Tim Holtz Distress Inks – Wild Honey, Tim Holtz Distress Ink – Rusty Hinge, Versamark

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Embellishments: Buttons Galore & More – Spring Fling Collection – SF100 Busy Bees

Copic markers were used to colour in this image.

Paper: Copic Marker X-Press It Blending Card, Yellow Cardstock, Strathmore Bristol

Miscellaneous: Cuttlebug, MISTI – Most Incredible Stamping Tool

I was also so excited when I received the e-mail from Jackie letting me know that my card was accepted for the Creative Scrapbooker Magazine. It was my first time ever entering any of my cards so I thought it was awesome. It can be found on page 126 of the Summer 2019 magazine.

 

 

 

Also entered into https://craftymilka.blogspot.com/2019/05/to-bee-or-not-to-bee-blog-hop.html.