Tag Archive | Hammermill – Premium Cardstock 110 lb.

Fa La La La!

Sep27

Today I’m sharing a Christmas card that I made using KLM Digital Designs – Window Kitty from the new September 2024 Release.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Tim Holtz Distress Ink – Evergreen Bough was applied around the outside edges with a finger dauber and a blender brush was used to apply ink around the inner edges of the card base.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. With a Cuttlebug, Sizzix Rounded Tags were used to die cut the image and Recollections – Black cardstock. The image was coloured in with Copic markers and a Prismacolor Premier black pencil was used to add in some finer fur lines, the whiskers and to blacken around the mouth, nose and eyes.

The card was now ready to assemble. U-Line Double-Sided Foam Tape was applied to the image and large rounded tag. Both were applied together and popped up onto the card. A sentiment from Creative Expressions – Wordies Sentiment Sheets – Traditional Christmas was cut out and adhered to the card using Scrapbook Adhesives – 3D Foam Strips. Lastly, the snow flakes were added with a Gelly Roll Sakura #10 Pen.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Window Kitty

Inks: HP Printer High Quality Grayscale, Tim Holtz Distress Ink – Evergreen Bough

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black cardstock

Die Cuts: Sizzix Rounded Tags – 8 dies

Miscellaneous: U-Line Double-Sided Foam Tape, Creative Expressions – Wordies Sentiment Sheets – Traditional Christmas (CEW008), Gelly Roll Sakura #10 Pen, Scrapbook Adhesives – 3D Foam Strips

Image coloured with Copic Markers:

Cat: BV29, BV25, C4, W9, R89, R59, R56, R46, R29, R27, R24, R02, R01, R00

Brick Wall and Mortar: E19, E17, E13, C5, C3, C1

Drapes: BG72, BG57, BG32, BG11

Floor and Wall: E29, E27, E25, E23, Y17, Y15, C3, C1, R27

Window, Window Sill and Window Frame: BG000, C9, C7

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Owl – Holidays!

Sep24

Today I’m sharing a Christmas card that I made using KLM Digital Designs – Owl – Santa Hat from the new September 2024 Release. This image also comes with 2 other sentiments, “Merry Christmas” and “Owl I want for Christmas is you” besides the sentiment that I have used one this card.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Light Blue cardstock and Recollections – Christmas Snow Globe Vellum were cut to the same size as the base. The blue cardstock was attached with double-sided tape and the vellum was attached over top of this with liquid glue. The glue was only applied to the bottom of the vellum and then behind some snowflakes where the glue would not show. Lawn Fawn – Sparkle Cardstock in “Pixie Dust” was cut to the size of 4.25″ x 1.5″ and then cut with scissors to create the wavy ground. This was popped up onto the vellum using U-Line Double-Sided Foam Tape. Trees were then added under the hill that were created at an earlier time using my Cricut Explore and .svg files from Miss Kate Cuttables – Snowy Tree using liquid glue.

The image and sentiment were printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers, then fussy cut. Sakura Glaze – Black pen was used to apply the dot in the eye and a black marker was used to go around the entire out-line of the owl. Cosmic Shimmer Fluffy Stuff was then applied to the hat fringe and pompom. A Marvy Uchida – Embossing Heat Tool was used to heat the liquid to create the fluff effect. Using my finger, I dabbed Stickles – Diamond over the top of the fluff on the hat and pompom.  Stickles – Diamond was also applied to the tops of the snow pieces on the trees.

Once the Stickles dried, 2 layers of U-Line Double-Sided Foam Tape and some liquid glue were applied to the back of the image and 1 layer was applied to the sentiment. Both items were popped up onto the card. Lastly, Recollections – Snowflake Specialty Polyester Glitter was placed onto the card to hide where the glue seeped through the Vellum.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Owl – Santa Hat

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Light Blue Cardstock, Recollections – Christmas Snow Globe Vellum (12″x12″), Lawn Fawn – Sparkle Cardstock in “Pixie Dust” (8.5″ x 11″)

Die Cuts: Miss Kate Cuttables – Snowy Tree (10342) (.svg)

Miscellaneous: Sakura Glaze – Black pen, U-Line Double-Sided Foam Tape, Cosmic Shimmer Fluffy Stuff, Recollections – Snowflake Specialty Polyester Glitter, Stickles – Diamond

Image coloured with Copic Markers:

Owl: Y38, Y35, Y17, Y13, E79, E53, E51, E50, E25, E23, E21, B39, B37, W9, W7,

Hat: BG09, BG05, BG02, BG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Floral Horseshoe – Pansies

Sep23

Today I’m sharing a CAS card that I made using KLM Digital Designs – Floral Horseshoe – Pansy from the new September 2024 Release.

The base card was created to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock. Cuttlebug Embossing Folder – Swiss dots and a Cuttlebug were used to create the background on Hammermill – Premium Colour 100 lb. cardstock, cut to the size of 4″ x 5.25″. This was popped up onto the base card using U-Line Double-Sided Foam Tape.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale and coloured in with Copic markers, then fussy cut. A Sakura Glaze – Black pen was used to apply the dot in the eye. Recollections – Purple Passions paper was cut to the size of 4″ x .75″. U-Line Double-Sided Foam Tape was applied to this and it was centred and popped up onto the Swiss Dots background. Crafter’s Companion Luxury Cardstock – Silver  was die cut 3 times using a Cutttlebug and “Good Luck” die from PaperCrafter Today – 15 Die Cut Sentiment Set. I glued the die cuts together with liquid glue to give them an embossed look and then glued them to the sentiment strip. Lastly, Kraftin’ Kimmie – Dazzling Dots were applied around the sentiment to finish off the card.

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Floral Horseshoe – Pansy

Inks: HP Printer High Quality Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Purple Passions 8.5″ x 11″, Crafter’s Companion Luxury Cardstock – Silver – 8.5 x 11″

Embossing Folder: Cuttlebug Embossing Folder – Swiss dots

Die Cuts: PaperCrafter Today – 15 Die Cut Sentiment Set

Miscellaneous: Sakura Glaze – Black pen, U-Line Double-Sided Foam Tape, Kraftin’ Kimmie – Dazzling Dots

Image coloured with Copic Markers:

Horseshoe: C5, C3, C2, C1

Flowers: E15, Y17, Y15, Y11, Y08, V17, V12, V09, V000, RV14, RV13, RV11, RV000

Bird: E99, E97, YR20, YR16, YR15, YR12, Y32, B39, B14, B12, B06, B05, B000, BG01, C7

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Kick Your Feet Up!

Sep20

Today I’m sharing a birthday card that I made for my husband’s birthday back in August. Image and sentiment is from Art Impressions – Sit Back Laugh Lines – 5421.

My Creative Time – Rectangle Frame Die was used to die cut the rectangle out of Copic Marker X-Press It Blending Card using a Cuttlebug. The image was then stamped onto the paper using a MISTI and Memento – Tuxedo Black ink. It was coloured in with the Copic markers listed below and then adhered to some blue cardstock using liquid glue. I cut around the image rectangle leaving a thin border and then repeated the process with black cardstock. The sentiment was stamped with Versa Fine – Onyx Black ink  onto blue cardstock and then Ranger – Clear Super Fine Detail embossing powder was applied. A Marvy Uchida – Embossing Heat Tool was used to heat emboss the powder. This was fussy cut and adhered to black cardstock using liquid glue.

The base of the card was created using a 5.5″ x 4.25″ base made from Hammermill – Premium Cardstock 110 lb.cardstock. I applied birthday patterned paper to the base which was cut to the same size and the edges were inked with Tim Holtz Distress Ink – Faded Jeans. I centred the layered coloured image rectangle onto the card using liquid glue and then popped up the sentiment using U-Line Double-Sided Foam Tape in the top left corner to complete the card. Inside the card were more fun sentiments regarding getting older. LOL!

My husband loved it and I hope you do to!

Card Recipe:

Stamp and Sentiments:  Art Impressions – Sit Back Laugh Lines – 5421

Inks: Memento – Tuxedo Black, Versa Fine – Onyx Black, Tim Holtz Distress Ink – Faded Jeans

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black, Miscellaneous blue and patterned paper from stash

Dies: My Creative Time – Rectangle Frame Dies

Embossing Powder: Ranger – Clear Super Fine Detail embossing powder

Miscellaneous: Marvy Uchida – Embossing Heat Tool, MISTI – Most Incredible Stamping Tool, U-Line Double-Sided Foam Tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R22, R20

Hair: E35, E34, E31

Jeans: B99, B97, B95, B91

Shirt: B04, B02, B01, B00

Chair and Slippers: E79, E74, E29, E27, E25, E23, C5, C3

Remote: N7, N4, N2

Socks: C5, C3, C2, C1, Colorless Blender

Wall: R89, R59, R39, C3, C2, C1, Colorless Blender

Floor: E39, E37, E35, E33

Hope you like it and have a great week!

Monster-ous Birthday Wishes!

Sep17

Today I’m sharing a birthday card that I made using the image and colouring class from Kit and Clowder – Bonus Class – July – August 2024 – Cute Monster. Had so much fun with this class learning how to blend colours and make spiky fur!

The image was printed onto Copic Marker X-Press It Blending Card using a HP printer set to High Quality Grayscale at the size of 3.75″ x 3.24″. It was coloured in using the instructional video from Alyce from Kit and Clowder and then fussy cut.  The cut image was applied to Recollections – Black cardstock and fussy cut again. The sentiment from Your Next Stamp – Silly Monsters was applied using Ranger Embossing Powder White – Extra Fine Detail and VersaMark ink onto Recollections – Black cardstock. A MISTI was used to get a clear stamped image. The embossing powder was heat embossed with a Marvy Uchida – Embossing Heat Tool. The sentiment was then fussy cut.

A card base at the size of 5.5″ x 4.25″ using Hammermill – Premium Cardstock 110 lb. cardstock was created. Tim Holtz Distress Inks – Peacock Feathers was applied all around the inside edges of the card with a blender brush. The patterned monster paper from Forever In Time – Party Monsters Perfect Prints was cut to the size of 5-3/8″ x 4-1/8″ and Tim Holtz Distress Inks – Shaded Lilac was applied all around the edges using a blender brush and finger dauber. This was adhered directly to the base using liquid glue. U-Line Double-Sided Foam Tape was applied to the monster and the sentiment and both were popped up onto the centre of the card. Lastly, Kraftin’ Kimmie – Underwater Dots and Stickles – Diamond were applied to the finished card to add some bling.

Card Recipe:

Stamp: Kit and Clowder – Bonus Class – July – August 2024 – Cute Monster class image

Sentiment: Your Next Stamp – Silly Monsters (CYNS047) – Retired

Inks: HP High Quality Grayscale, VersaMark, Tim Holtz Distress Inks – Peacock Feathers, Tim Holtz Distress Inks – Shaded Lilac

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black, Forever In Time – Party Monsters Perfect Prints

Embossing Powder: Ranger Embossing Powder White – Extra Fine Detail

Miscellaneous: Marvy Uchida – Embossing Heat Tool, MISTI – Most Incredible Stamping Tool, U-Line Double-Sided Foam Tape, Kraftin’ Kimmie – Underwater Dots, Stickles – Diamond

Hope you like it and have a great week!

Pilgrim Gnome!

Aug20

Today I’m sharing a Thanksgiving card using KLM Digital Design – Pilgrim Gnome from the new August 2024 release that I made. This image also comes with 2 more sentiments, “There is always something to be thankful for” and “Oh my gourd, you’re handsome”. Canadian Thanksgiving is only a couple of months away, time to start preparing now!

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The image was coloured in with Copic markers and then fussy cut leaving a thin white border. I wanted the image to stand out on the card, so I attached the image to Recollections – Black cardstock and repeated the process. The sentiment was trimmed down to 3.75″ x  1″. The edges were inked with Tim Holtz Distress Ink – Aged Mahogony and Tim Holtz Distress Ink – Fossilized Amber. The sentiment was attached to Recollections – Black cardstock using liquid glue and trimmed down to 3-7/8″ x 1-1/8″.

The card was now ready to assemble.  I began with a 5.5″ x 4.25″ base card using Hammermill – Premium Cardstock 110 lb.. Thanksgiving paper was trimmed to be the same size as the base and was attached with liquid glue. Tim Holtz Distress Ink – Aged Mahogony and a finger dauber were used to ink around all of the edges of the card. U-Line Double-Sided Foam Tape was applied to both the image and sentiment and both were popped up onto the card.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Pilgrim Gnome

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Aged Mahagony, Tim Holtz Distress Ink – Fossilized Amber

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black

Miscellaneous: U-Line Double-Sided Foam Tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R22, R20

Hair and Beard: YR68, YR31, YR18, Y38

Man’s Top and Socks: E79, E59, E57, E55

Man’s Pants: W5, W3, W1

Shoes, Man’s Hat and Belt: W9, W7, W5, W1

Hat Band: C5, C3, C1

Buckles: E15, Y28, YR24, YR23

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Floral Horseshoe – Cosmos

Aug19

Today I’m sharing a CAS card that I made using KLM Digital Designs – Floral Horseshoe – Cosmos from the new August 2024 Release.

The image was printed out with my HP Printer onto Copic Marker X-Press It Blending Card using High Quality Grayscale. This prevents the image from smearing when you go to colour it in. The image was coloured in with Copic markers and then cut to the size of 4″ x 5.25″. The base card was cut to the size of 4.25″ x 5.5″ out of Hammermill – Premium 110 lb. cardstock . A Sharpie – Gold Medium Point – Water Based Paint marker was used to go around the image and the base card. The image was then adhered to the base card with liquid glue. YNS Gumdrops were applied to finish the card off!

Card Recipe:

Stamp and Sentiment: KLM Digital Designs – Floral Horseshoe – Cosmos

Inks: HP Printer High Quality Grayscale, Sharpie – Gold Medium Point – Water Based Paint, Sakura Glaze – Black

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Miscellaneous: YNS Gumdrops

Image coloured with Copic Markers:

Horseshoe: C5, C3, C2, C1

Flowers: BV17, BV13, BV11, BV000, E15, Y38, Y18, Y04

Leaves: BG99, BG93

Bird: E99, E97, YR20, YR16, YR15, YR12, Y32, B39, B14, B12, B06, B05, BG01, C7

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Retired – Bye Bye!

Aug17

I finished my last day of work on Friday, August 16, 2024. My official date will be Saturday, September 14, 2024 as I tacked on my vacation pay on the end. 🙂
My co-workers gave me an amazing retirement party and parting gifts and we all had a wonderful time. I shall cherish the memories for a long time to come.

Today I’m sharing a retirement card that I made for my co-workers who were on my immediate Systems Administrator’s team and also the Networking team whom I had worked closely with over the last 13.5 years. Each of the card fronts were created using various stamps from Art Impressions – Pack Your Bags Set.

With My Creative Time dies listed below, a Cuttlebug and papers from Copic Marker X-Press It Blending Card, I die cut the rectangles and ovals. Hammermill – Premium Colour 100 lb. paper was used to die cut the circles. Recollections – Midnight Navy Cardstock was then cut into rectangles 3-7/8″ x 2-5″8″. Using my Cricut and Cricut Design Space, I measured the circle die cut and oval die cut and then created my own solid cuts. To do this I used some white plain printer paper until I was satisified with the cut, then I set the device to cut out 19 of each out of the Recollections – Midnight Navy Cardstock.

The images were stamped onto Copic Marker X-Press It Blending Card with Memento – Tuxedo Black ink and a MISTI. The MISTI was so perfect to use because I made 19 cards in total, so I just positioned the stamps once and then kept substituting the die cut papers until I was done. This made the stamping so easy. I used the same process for the sentiment, except I chose to use Versa Fine – Majestic Blue this time.

The images were coloured in with the Copics listed below. Once all of the images were coloured and the sentiments were stamped, I assembled the 2 pieces for each shape together with liquid glue and set them aside.

The bases of the cards were created using a 5.5″ x 4.25″ base made from Hammermill – Premium Cardstock 110 lb.cardstock. Papers from Creative Memories and PhotoPlay listed below were then cut to the size of 5.25″ x 4″ each. The edges were then inked with Tim Holtz Distress Ink – Chipped Sapphire.

To assemble the card, I used liquid glue to attach the background papers and each of the shapes. These were all adhered to each card. To create the notes on the inside, I used Microsoft Office Word and created 4 sentiments per 11″ x 8.5″ sheet of landscaped paper by creating text boxes at the size of 5.25″ x 4″. Once they were all printed out, I just cut them to size and adhered them with double-sided tape.

Card Recipe:

Stamp and Sentiments:  Art Impressions – Pack Your Bags Set – 4392

Inks: Memento – Tuxedo Black, Versa Fine – Majestic Blue, Tim Holtz Distress Ink – Chipped Sapphire

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Colour 100 lb., Hammermill – Premium Cardstock 110 lb., Creative Memories – Deep Blue Sea (12″x12″) Designer Pack, PhotoPlay – SetSail – Sail Away (12″x12″), PhotoPlay – Anchors Away – Sun Deck (12″x12″), Recollections – Midnight Navy Cardstock

Dies: My Creative Time – Rectangle Frame Dies, My Creative Time – Scalloped Stitched Oval Dies, My Creative Time – More Stitched Circles MCT-D136, Cricut, Cricut Design Space Shapes

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R46, R20, R14, R08, YR02

Hair: E35, E34, E31

Clothing and Accessories: BG09, BG05, BG02, BG01, R46, R14, R08, G14, YG23, C2, C1

Glasses: N2, R39

Ship: C3, C2, C1, C0, C00, B29, B63, B28, B26, R46, R14, R08

Water: BG32, BG13, BG07, BG01, B02

Hope you like it and have a great week!

When Someone Means So Much!

Aug3

Today I’m sharing a simple card using KLM Digital Design – Pen Pal Gnome from the July 2024 release that I made. This image also comes with 2 more sentiments, “I miss you everyday, but today you get a card” and “Better than a text”.

To make this card, I began with Hammermill – Premium Cardstock 110 lb. cut to the size of 5.5″ x 4.25 for the base card.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card and the image was coloured in with Copic markers listed below. For some finer lines for the feathers, Prismacolor Premiere pencils were added after doing the base with the Copic markers. The finished image and sentiment were cut down to the same size as the base and applied to the base card using double-sided tape.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Pen Pal Gnome

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Miscellaneous: Double-Sided Tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: W3, W1, W00

Shirt: BG72, BG57, BG32, BG11

Hat and Pants: B99, B97, B95, B91

Shoes: E27, E25, E23

Feather and Ink: BV29, YR30, E40, E41, E42, E43, E44, (Prismacolor Premiere Pencils: PC1076, PC1074, PC1072)

Shadow: C2, C1, C0

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Hi There!

Jul27

Today I’m sharing a card using KLM Digital Design – Pre-colored Toad 1 from the new July 2024 release. This stamp is pre-coloured and can be used in so many different ways. You just have to use your imagination!

I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Cardstock 110 lb. cardstock.  For the background, I cut Reminisce – The Menagerie Kit paper to the sizes of 5-3/8″ x 4-1/8″ and 2 pieces at .5″ x 4-1/8″. Recollections – Green cardstock was cut to the size of .75″ x 4-1/8″.  All of the edges were inked with Tim Holtz Distress Inks – Peeled Paint and then applied to the base card using double-sided tape.

The image was imported into Microsoft Word and I wanted the toad to be sitting on a lily pad, so within Microsoft Word, I added in an oval shape and then a triangular shape. The oval shape was made green and the triangle shape was made white. I positioned the toad where I wanted it to go and then printed out the combined image onto Copic Marker X-Press It Blending Card.  Once the completed image was printed, I fussy cut around the image and attached it to some Recollections – Green cardstock with some tape and liquid glue. Once again, I fussy cut around the image. From the patterned paper, I also cut a couple of the lily pad flowers and popped them up on the lily pad using U-Line Double-Sided Foam Tape. Using a Cuttlebug, Lawn Fawn Lawn Cuts – Henry’s 123s, Lawn Fawn Lawn Cuts – Henry’s ABCs and Recollections – Black cardstock, I die cut the sentiment twice and then glued the pieces together. For the exclamation mark, I die cut 5 so that the dot would be at the same height as the other letters.

The card was now ready to assemble. I applied U-Line Double-Sided Foam Tape to the finished image and popped it up onto the centre of the card. Liquid glue was added to the centre of each letter and they were adhered to the base card.

Card Recipe:

Stamp:  KLM Digital Design – Pre-colored Toad 1

Sentiment: Lawn Fawn Lawn Cuts – Henry’s 123s, Lawn Fawn Lawn Cuts – Henry’s ABCs

Inks: HP Printer Grayscale, Tim Holtz Distress Inks – Peeled Paint

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Reminisce – The Menagerie Kit 1 (12″ x 12″), Recollections – Black cardstock, Recollections – Green cardstock

Miscellaneous: U-Line Double-Sided Foam Tape

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Pansies Floral Basket!

Jul11

Today I’m sharing a card using KLM Digital Design – Floral Basket – Pansies from the new July 2024 release. This stamp also comes with 2 other sentiments, “You Grow Girl!” and “Let me plant one on ya!“.

I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Cardstock 110 lb. cardstock. Recollections – Matte Gold Foil cardstock was cut to the same size and then adhered directly to the base using double-sided tape. Kate Knight – Spring Fling Designer Paper was cut to the size of 5.25″ x 4″. With a finger dauber and Tim Holtz Distress Ink – Prize Ribbon, I inked around  the outer edges. The finished piece was applied to the base using double-sided tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card.  I wanted 2 of the top flowers to pop, so I cropped them in Microsoft Word and printed them out as well. Copics were used to colour in the image and then it was fussy cut leaving a thin white border around it. I applied this to Recollections – Black cardstock and then fussy cut again. This piece was then applied to Recollections – Matte Gold Foil cardstock and the fussy cut one last time. The sentiment was fussy cut and applied to Recollections – Matte Gold Foil cardstock and fussy cut again. With Recollections – Blue cardstock, I cut a piece to be the size of 5.25″ x 1.25″ and then inked around the edges with Tim Holtz Distress Ink – Prize Ribbon. From the Recollections – Matte Gold Foil cardstock, I cut 2 strips of 5.5″ x 1/8″.

The card was now ready to assemble. I applied U-Line Double-Sided Foam Tape to the finished image, sentiment and 2 flowers and positioned them to where I wanted then to go. With double-sided tape, I adhered the blue strip to the bottom of the card. Liquid glue was applied to the 2 thin gold strips and they were placed above and below the blue strip. The sentiment, flower basket and 2 flowers were then popped up onto the card. Lastly, I added in some bling using Buttons Galore & More – Blueberry gems.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Floral Basket – Pansies

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Prize Ribbon

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Matte Gold Foil cardstock, Kate Knight – Spring Fling Designer Paper Stack (Cardmaking & Papercraft 2012), Recollections – Blue cardstock

Miscellaneous: U-Line Double-Sided Foam Tape, Buttons Galore & More – Blueberry gems

Image coloured with Copic Markers:

Leaves: G16, YG25, YG23, YG21

Flowers: E15, Y17, Y15, Y11, Y08, V09, V06, V04, RV14, RV13, RV11, B79, B66, B63

Basket: YR27, YR24, YR23, YR21

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Little Girl Gnome and Pup!

Jun27

Today I’m sharing a card using KLM Digital Design – Little Girl Gnome & Pup from the new June 2024 release that I made. This image also comes with 2 more sentiments, “you’re so doggone cute!” and “I wuff you”. All my life, I grew up with pets. They always brought so much joy and laughter to the home and were all so unique!

To make this card, I began with a 5.5″ x 4.25 base card using Hammermill – Premium Cardstock 110 lb.. Recollections – Black cardstock was cut to the same size as the base and was adhered to the card using double-sided tape. Hammermill – Premium Colour 100 lb. cardstock was cut to the same size as the base. I spritzed the front and back of the cardstock and then using Kraftin’ Kimmie – Pawprints 2 stencil, a rubber mat and my Cuttlebug, I embossed the paper. With the stencil still in place on the paper, using Tim Holtz Distress Ink – Black Soot and Tim Holtz Distress Inks – Candied Apple and small blending brushes, I inked the pawprints and hearts. Once this was done, I cut the paper to the size of 5-3/8″ x 4-1/8″ and adhered it to the black background using double-sided tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The image and sentiment were coloured in with Copic markers. The freckles were applied to the cheeks using Gelly Roll Sakura #8 Pen and the eyes and nose for the dog were added using a Sakura Glaze – Black pen. Gelly Roll Sakura #8 Pen was applied for the dot in the eyes and accent on the nose for the dog.

My Creative Time -Stitched Squares Inside and Out was used to die cut the image. I applied a border around the image and sentiment using Recollections – Black cardstock. U-Line Double-Sided Foam Tape was applied to both the image and sentiment and they were centered on the card.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Little Girl Gnome & Pup

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Black Soot, Tim Holtz Distress Inks – Candied Apple

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Recollections – Black cardstock, Hammermill – Premium Colour 100 lb.

Dies: My Creative Time -Stitched Squares Inside and Out

Stencil: Kraftin’ Kimmie – Pawprints 2

Miscellaneous: Gelly Roll Sakura #8 Pen, Sakura Glaze – Black, U-Line Double-Sided Foam Tape

Image coloured with Copic Markers:

Skin: E21, E11, E00, E000, R30, R24

Hair: YR68, YR31, YR18, Y38

Dress and Hat: V17, V15, V12

Shirt: Y17, Y15, Y11

Shoes: E27, E25, E23

Puppy: YR27, YR24, YR23, YR21, R27, R24, R22

Sky: B60, B02, B01, B00, B000, C00, Colorless Blender

Grass: YG17, YG13, YG03, YG01

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Floral Mug!

Jun19

Today I’m sharing a card using KLM Digital Design – Floral Coffee Cup from the new June 2024 release. This stamp also comes with 2 other sentiments, “Wonderful in every way” and “Enjoy the little moments”. Love how this image can be used with so many wonderful sentiments to fit any occasion!

I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Cardstock 110 lb. cardstock. Hot Buy – Recollections – Jewel Tones was cut to the same size and then adhered directly to the base using double-sided tape. Momenta – Cardstock was also cut to the same size as the base and then Nuvo Glimmer Paste – Moonstone was applied to it using Kraftin’ Kimmie – Krafty Kaleidoscope stencil. I thought this gave it some nice added sparkle! Once it was all dry, I cut the paper to the size of 5.25″ x 4″. With a blending brush and Tim Holtz Distress Ink – Salvaged Patina, I inked around  the outer edges. The finished piece was applied to the background paper using double-side tape.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. Copics were used to colour in the image and then it was fussy cut.  U-Line Double-Sided Foam Tape was applied to the finished image and it was popped up onto the card.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Floral Coffee Cup

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salvaged Patina

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Momenta – Cardstock, Hot Buy – Recollections – Jewel Tones

Stencil: Kraftin’ Kimmie – Krafty Kaleidoscope

Miscellaneous: U-Line Double-Sided Foam Tape, Nuvo Glimmer Paste – Moonstone, Blending Brush

Image coloured with Copic Markers:

Leaves: G16, YG25, YG23, YG21

Flowers: E15, Y17, Y15, Y08, RV19, RV17, RV14, RV000

Mug: BG15, BG13, BG11,BG10

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Father’s Day Fishing Gnome!

Jun16

Today I’m sharing a Father’s Day card using Polkadoodles – Fishing Gnome For Men – Bundle that I made for my dad who lives to fish! Happy Father’s Day to all of the father’s out there and I hope you all enjoy your special day!

In Microsoft Word, I created a 5.5″ x 5.5″ outline and then imported the background paper first. Next, I created another box as a guideline and inserted the image into it and centered it on the patterned paper. I then brought in the little bait box and sized it to fit next to the chair. Lastly, I inserted the sentiments from the same digital stamp set and changed the background on them to a blue, leaving the black outline around the text. I moved one sentiment to the top and the other to the bottom. Once I was satisfied on how everything looked, I printed it out onto Copic Marker X-Press It Blending Card with my HP Printer.

The image was coloured in with the Copics listed below and then attached to the base card of 5.5″ x 5.5″. Lastly, I added some stickles to the dragonflies wings to give them a little bit of added sparkle.

Card Recipe:

Stamp and Sentiment:  Polkadoodles – Fishing Gnome For Men – Bundle

Inks: HP Printer, Tim Holtz Distress Ink – Faded Jeans

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Polkadoodles – Gnome Men Fishing – printable paper patterns

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: E29, E25, E23, E21

Hat: B99, B97, B95, B91

Shoes: B99, B97, B95, B93, B91, N2, N1, N0

Shirt: B26, B23, B21

Cattails: E27, E25, E23

Fishing Rod and Ball: E59, E57, E55, YR09, YR07, YR04, YG07, YG06, YG03, Y08, Y06

Water: B24, BG13, BG11, BG10, BG02, BG01, BG000

Bag and Bait Box: E89, E87, E84, E81, C3, C2, C1

Grass and Leaves: G19, YG25, YG23, YG21

Chair: E49, E47, E44, E34

Dragonflies: BV00, BV000, BG10, Stickles – Diamond

Sky and Clouds: B01, B00, B000, B0000, BG70, C0, C00, Colorless Blender

Hope you like it and have a great week!

Also entered into
https://polkadoodle.blogspot.com/2024/06/wk-24-card-making-paper-craft-challenge.html

Enjoy The Little Moments

Jun7

Today, I’m sharing a card using KLM Digital Design – Floral Branch Frames from the new June 2024 release and the sentiment from KLM Digital Design – Floral Coffee Cup. The floral frames stamp set comes with 4 beautiful floral frames to choose from. I love these frames because you can use them for so many different occasions.

Hammermill – Premium Cardstock 110 lb. was used to create a 5.5″ x 4.25″ card base. I cut Momenta – Cardstock paper to the same size for the background and applied it directly to the base using double-sided tape. With a Cuttlebug, I die cut the Lattice background using Pinkfresh Studio – Elongated Lattice die and Recollections white cardstock. Zig 2 way glue was applied to the back of the die cut and it was adhered to the base.

The image was imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers listed below and then applied iCraft – deco foil adhesive pen around the circle frame border. Once the glue was dry, I rubbed on some gold foil from Prima (Rub-On) Foils – Jolly. This was my very first time trying this and I wasn’t quite satisfied as the border wasn’t completely smooth. I tested a small piece of paper on the side with some Zig 2 way glue with a finer point and waited for the glue to dry. I tried using the gold foil on this and saw that it worked. Yay! So once again, I repeated the process and went around the circle with the Zig glue this time and the rubbed the foil on to make the circle smoother. I will definitely be trying to use this technique more often now for sure.

The image was fussy cut and then popped up onto the card using U-Line Double-Sided Foam Tape. Lastly, to add a little bit of bling to the card, I applied some random Pixie Dust Glittered – YNS Gumdrops.

Card Recipe:

Stamp:  KLM Digital Design – Floral Branch Frames, KLM Digital Design – Floral Coffee Cup

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Momenta – Cardstock, Recollections – White Cardstock

Dies: Pinkfresh Studio – Elongated Lattice

Miscellaneous: U-Line Double-Sided Foam Tape, Prima (Rub-On) Foils – Jolly, iCraft – deco foil adhesive pen, Zig 2 way glue, YNS Gumdrops – Pixie Dust Glittered, Uni Posca Pen – Yellow

Image coloured with Copic Markers:

Flower Top and Bottom: V17, V15, V12, V000, YR12, E15, Uni Posca Pen – Yellow

Centre Flower: V09, V06, V04, V000, YR12, E15, Uni Posca Pen – Yellow

Leaves: G16, YG25, YG23, YG21

Inner Circle Background: G000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Mandala #6 – Thank You

May31

Today, I’m sharing a Thank You card using KLM Digital Design – Mandala #6 from the new May 2024 release. I fell in love with this Mandala and thought it would make a great flower!

Hammermill – Premium Cardstock 110 lb. was used to create a 5.5″ x 4.25″ card base. I cut some designer paper that I had for the background and applied it directly to the base using double-sided tape. With a Cuttlebug, I die cut the trellis background using Recollections white cardstock and Pinkfresh Studio – Dotted Lattice die. The leaves were die cut from some scrap green cardstock and Spellbinders Cutting Dies – Southern Magnolia.

The image was imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I coloured in the image with Copic markers listed below and then I fussy cut around it and using a bone folder, curved the petals. The Mandala was popped up onto the top part of the card using 2 layers of 3M Double-Sided Foam Tape in the centre.  I glued the leaves to the card under the mandala, but first I added a slight crease in each of them to round up the sides. To finish off the card, I used some ephemora and popped it up onto the card using U-Line Double-Sided Foam Tape. Lastly, I added a gem from Forever In Time – Goldent Sunset in the centre of the mandala and some additional gems on the card to give it a bit more sparkle!

Card Recipe:

Stamp:  KLM Digital Design – Mandala #6

Inks: HP Printer Grayscale

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Floral Designer Paper, Green Cardstock, Recollections – White Cardstock

Dies: Pinkfresh Studio – Dotted Lattice, Spellbinders Cutting Dies – Southern Magnolia

Miscellaneous: 3M Double-Sided Foam Tape, Ephemera (Thank you), U-Line Double-Sided Foam Tape, Forever In Time – Golden Sunset gems

Image coloured with Copic Markers:

Mandala Centre: Y19, Y17, Y08

Mandala Inner Flower: RV19, RV17, RV14, RV000

Mandala Leaves: G16, YG25, YG23, YG21

Mandala Outer Petals: RV09, RV06, RV04, RV000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Cupcakes and Frosting!

May26

Today I’m sharing a Birthday card using KLM Digital Design – Floral Cupcake Assortment from the new May 2024 release that I made. This image also comes with 2 more sentiments, “Happy Birthday Cupcake” and “Happiness is only a Cupcake away”, as well as 2 more cupcakes. This stamp set is amazing to create so many different card designs!

To make this card, I began with a 5″ x 5″ base card using Hammermill – Premium Cardstock 110 lb.. Doodlebug – hey cupcake designer paper was cut to 5″ x 5″ and then it was cut again to 4 x 1.25″ pieces. I applied double-sided tape and liquid glue to the individual pieces and then alternating each side adhered them each to the base card. Tim Holtz Distress Ink – Picked Raspberry was then applied to all of the edges around the card using a finger dauber.

The images and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The images were coloured in with Copic markers. Using a Cuttlebug and Lifestyle Crafts Cutting Dies – Nesting Circles, I die cut each of the cupcakes out using 2.25″ circle die.  Using the finger dauber, I inked around all of the edges of the circles using Tim Holtz Distress Ink – Picked Raspberry. The sentiment was fussy cut and then adhered to black cardstock and fussy cut again.

U-Line Double-Sided Foam Tape was applied to all of the pieces and they were popped up onto the card. Lastly, Wink of Stella – Clear was applied to the frosting on the cupcakes.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Floral Cupcake Assortment

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Picked Raspberry

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Doodlebug – hey cupcake (6″x6″) paper pad

Dies: Lifestyle Crafts Cutting Dies – Nesting Circles

Miscellaneous: Wink of Stella – Clear, U-Line Double-Sided Foam Tape

Image coloured with Copic Markers:

Cupcake Wrappers and Flower Centres: E15, Y19, Y17, Y08

Leaves: G16, YG25, YG23

Purple Flowers: V17, V15, V12

Red Violet Flower: RV69, RV66, RV63

Icing and Sparkles: Y02, Y00, Y000, Y25, RV17, V12

Shadow: BG000

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Birthday Paw-ty!

May25

Today I’m sharing a Birthday card using KLM Digital Design – Little Boy Gnome & Pup from the new May 2024 release that I made. This image also comes with 2 more sentiments, “sit happens!” and “the journey of life is sweeter when travelled with a dog”.

To make this card, I began with a 5.5″ x 4.25 base card using Hammermill – Premium Cardstock 110 lb.. My Creative Time – Rectangle Frame Die Layers was used to die cut the balloon and party patterned paper from Doodlebug Design Inc. – Party Time paper pad. Tim Holtz Distress Ink – Faded Jeans was then applied to all of the edges around the die cuts. Next, Lawn Fawn – Simple Grassy Hillsides and the Rectangle Frames were used to cut the little bits of grass out of green cardstock.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. The image and sentiment were coloured in with Copic markers and then I added some extra fur onto the dog by applying PrismaColor Pencils. The freckles were applied to the cheeks using Gelly Roll Sakura #8 Pen. The sentiment was applied directly onto the base card on the inside using double-sided tape.

The card was now ready to put together. I applied the balloon patterened paper directly to the base card using double-sided tape. The lighter green grass was attached directly to the confetti die cut with double-sided tape. U-Line Double-Sided Foam Tape was applied to both the image and also the darker grass, as well as, the confetti die cut. These were all layered onto the centre front of the card.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Little Boy Gnome & Pup

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Faded Jeans

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb., Green cardstock, Doodlebug Design Inc. – Party Time (6″ x 6″)

Dies: Lawn Fawn – Simple Grassy Hillsides, My Creative Time – Rectangle Frame Die Layers – MCT-D274

Miscellaneous: Gelly Roll Sakura #8 Pen, U-Line Double-Sided Foam Tape

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Hair: YR27, YR24, YR23, YR21

Jeans and Hat: B99, B97, B95, B91

Shirt: BG72, BG57, BG32, BG11, C3, C2, C1 (Buttons)

Shoes: C9, C7, C5, C3, C2, C1

Puppy: YR27, YR24, YR23, YR21, R27, R24, R22

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Fishing Gnome!

Apr23

Today I’m sharing a Birthday card using KLM Digital Design – Fisherman Gnome from the new April 2024 release that I made for my dad. This image also comes with 2 more sentiments, “May all your fishes come true” and “…I’m hooked on you”. My dad loves fishing and goes every chance he gets!

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. I had created a 5.5″ x 4.25 frame around the image before printing it out with a HP Printer. I also printed out a second image onto plain photocopy paper and fussy cut around it. I attached the mask that I had created out of the plain paper over top of the coloured image. Using some stencils that I had created previously with Avery Elle – Pierced Clouds Dies and Tim Holtz Distress Ink – Salty Ocean, I created the clouds with a blender brush.

The image was coloured in with the Copics listed below and then attached to the base card.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Fisherman Gnome

Inks: HP Printer Grayscale, Tim Holtz Distress Ink – Salty Ocean

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Dies \ Stencil: Avery Elle – Pierced Clouds Die (D-05-01)

Image coloured with Copic Markers:

Skin: E21, E11, E04, E00, E000

Beard: C3, C2, C1,C0

Jeans and Hat: B99, B97, B95, B91

Shirt: E57, E55, E53

Dock: E79, E57, E53, E23

Fish: YR61, YR02, YR00, R02, W3, W2, W1, Y35, E93

Pole and Sign: C2, C1,C0, C00, W3, W2, W1, Colorless Blender

Fishing Rod and Ball: E27, E25, E23, YR09, YR07, YR04, YG07, YG06, YG03, Y08, Y06, Y04

Water: B93, B91, B45, B41, B32, B05, B02, BG10

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.

Floral Envelope!

Apr10

Today I’m sharing a card using KLM Digital Design – Floral Envelope – Daisy from the new April 2024 release. This stamp also comes with 2 other sentiments, “Happy Mail” and “Just for you”.

I began with a card base of 5.5″ x 4.25″ using Hammermill – Premium Cardstock 110 lb. cardstock. The background was created using Kraftin’ Kimmie – Mountains of Mail stencil and Krafty Kolours – Flirty Flamingo. The same ink was also used to create  a border around the card using a finger dauber.

The image and sentiment were imported into Microsoft Word and printed out onto Copic Marker X-Press It Blending Card. Copics were used to colour in the image and then it was fussy cut along with the sentiment.  U-Line Double-Sided Foam Tape was applied to the sentiment and image and both were popped up onto the card. Lastly, I added in a few Kraftin’ Kimmie pop dots to finish off the card.

Card Recipe:

Stamp and Sentiment:  KLM Digital Design – Floral Envelope – Daisy

Inks: HP Printer Grayscale, Krafty Kolours – Flirty Flamingo

Paper: Copic Marker X-Press It Blending Card, Hammermill – Premium Cardstock 110 lb.

Stencil: Kraftin’ Kimmie – Mountains of Mail

Miscellaneous: U-Line Double-Sided Foam Tape, Kraftin’ Kimmie pop dots

Image coloured with Copic Markers:

Leaves: G16, YG25, YG23

Flowers: E15, YR23, Y15, Y11, Y00, RV69, RV66, RV55, RV000

Shadow: C2, C00, Colorless Blender

Hope you like it and have a great week!

You can find more cards to inspire you at KLM Designs, KLM Digital Design Team and KLM Digital Designs on the Facebook Fan page from the rest of our design team.